| * Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) |
| |
| Required properties: |
| - compatible : Should be "fsl,<soc>-uart" |
| - reg : Address and length of the register set for the device |
| - interrupts : Should contain uart interrupt |
| |
| Optional properties: |
| - fsl,uart-has-rtscts : Indicate the uart has rts and cts |
| - fsl,irda-mode : Indicate the uart supports irda mode |
| - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works |
| is DCE mode by default. |
| |
| Note: Each uart controller should have an alias correctly numbered |
| in "aliases" node. |
| |
| Example: |
| |
| aliases { |
| serial0 = &uart1; |
| }; |
| |
| uart1: serial@73fbc000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fbc000 0x4000>; |
| interrupts = <31>; |
| fsl,uart-has-rtscts; |
| fsl,dte-mode; |
| }; |
