| /* |
| * drivers/pwm/pwm-pxa.c |
| * |
| * simple driver for PWM (Pulse Width Modulator) controller |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * 2008-02-13 initial version |
| * eric miao <eric.miao@marvell.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/pwm.h> |
| |
| #include <asm/div64.h> |
| |
| #define HAS_SECONDARY_PWM 0x10 |
| #define PWM_ID_BASE(d) ((d) & 0xf) |
| |
| static const struct platform_device_id pwm_id_table[] = { |
| /* PWM has_secondary_pwm? */ |
| { "pxa25x-pwm", 0 }, |
| { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM }, |
| { "pxa168-pwm", 1 }, |
| { "pxa910-pwm", 1 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, pwm_id_table); |
| |
| /* PWM registers and bits definitions */ |
| #define PWMCR (0x00) |
| #define PWMDCR (0x04) |
| #define PWMPCR (0x08) |
| |
| #define PWMCR_SD (1 << 6) |
| #define PWMDCR_FD (1 << 10) |
| |
| struct pxa_pwm_chip { |
| struct pwm_chip chip; |
| struct device *dev; |
| |
| struct clk *clk; |
| int clk_enabled; |
| void __iomem *mmio_base; |
| }; |
| |
| static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct pxa_pwm_chip, chip); |
| } |
| |
| /* |
| * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE |
| * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE |
| */ |
| static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); |
| unsigned long long c; |
| unsigned long period_cycles, prescale, pv, dc; |
| unsigned long offset; |
| int rc; |
| |
| offset = pwm->hwpwm ? 0x10 : 0; |
| |
| c = clk_get_rate(pc->clk); |
| c = c * period_ns; |
| do_div(c, 1000000000); |
| period_cycles = c; |
| |
| if (period_cycles < 1) |
| period_cycles = 1; |
| prescale = (period_cycles - 1) / 1024; |
| pv = period_cycles / (prescale + 1) - 1; |
| |
| if (prescale > 63) |
| return -EINVAL; |
| |
| if (duty_ns == period_ns) |
| dc = PWMDCR_FD; |
| else |
| dc = (pv + 1) * duty_ns / period_ns; |
| |
| /* NOTE: the clock to PWM has to be enabled first |
| * before writing to the registers |
| */ |
| rc = clk_prepare_enable(pc->clk); |
| if (rc < 0) |
| return rc; |
| |
| writel(prescale, pc->mmio_base + offset + PWMCR); |
| writel(dc, pc->mmio_base + offset + PWMDCR); |
| writel(pv, pc->mmio_base + offset + PWMPCR); |
| |
| clk_disable_unprepare(pc->clk); |
| return 0; |
| } |
| |
| static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); |
| int rc = 0; |
| |
| if (!pc->clk_enabled) { |
| rc = clk_prepare_enable(pc->clk); |
| if (!rc) |
| pc->clk_enabled++; |
| } |
| return rc; |
| } |
| |
| static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip); |
| |
| if (pc->clk_enabled) { |
| clk_disable_unprepare(pc->clk); |
| pc->clk_enabled--; |
| } |
| } |
| |
| static struct pwm_ops pxa_pwm_ops = { |
| .config = pxa_pwm_config, |
| .enable = pxa_pwm_enable, |
| .disable = pxa_pwm_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int __devinit pwm_probe(struct platform_device *pdev) |
| { |
| const struct platform_device_id *id = platform_get_device_id(pdev); |
| struct pxa_pwm_chip *pwm; |
| struct resource *r; |
| int ret = 0; |
| |
| pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); |
| if (pwm == NULL) { |
| dev_err(&pdev->dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| pwm->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(pwm->clk)) |
| return PTR_ERR(pwm->clk); |
| |
| pwm->clk_enabled = 0; |
| |
| pwm->chip.dev = &pdev->dev; |
| pwm->chip.ops = &pxa_pwm_ops; |
| pwm->chip.base = -1; |
| pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "no memory resource defined\n"); |
| return -ENODEV; |
| } |
| |
| pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r); |
| if (pwm->mmio_base == NULL) |
| return -EADDRNOTAVAIL; |
| |
| ret = pwmchip_add(&pwm->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, pwm); |
| return 0; |
| } |
| |
| static int __devexit pwm_remove(struct platform_device *pdev) |
| { |
| struct pxa_pwm_chip *chip; |
| |
| chip = platform_get_drvdata(pdev); |
| if (chip == NULL) |
| return -ENODEV; |
| |
| return pwmchip_remove(&chip->chip); |
| } |
| |
| static struct platform_driver pwm_driver = { |
| .driver = { |
| .name = "pxa25x-pwm", |
| .owner = THIS_MODULE, |
| }, |
| .probe = pwm_probe, |
| .remove = pwm_remove, |
| .id_table = pwm_id_table, |
| }; |
| |
| static int __init pwm_init(void) |
| { |
| return platform_driver_register(&pwm_driver); |
| } |
| arch_initcall(pwm_init); |
| |
| static void __exit pwm_exit(void) |
| { |
| platform_driver_unregister(&pwm_driver); |
| } |
| module_exit(pwm_exit); |
| |
| MODULE_LICENSE("GPL v2"); |