| EEPROMs (I2C) | |
| Required properties: | |
| - compatible : should be "<manufacturer>,<type>" | |
| If there is no specific driver for <manufacturer>, a generic | |
| driver based on <type> is selected. Possible types are: | |
| 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64, | |
| 24c128, 24c256, 24c512, 24c1024, spd | |
| - reg : the I2C address of the EEPROM | |
| Optional properties: | |
| - pagesize : the length of the pagesize for writing. Please consult the | |
| manual of your device, that value varies a lot. A wrong value | |
| may result in data loss! If not specified, a safety value of | |
| '1' is used which will be very slow. | |
| - read-only: this parameterless property disables writes to the eeprom | |
| Example: | |
| eeprom@52 { | |
| compatible = "atmel,24c32"; | |
| reg = <0x52>; | |
| pagesize = <32>; | |
| }; |