blob: f9112b801a33c42aafd4280020ddf74730273af2 [file] [log] [blame]
/* linux/arch/arm/mach-s3c2410/mach-bast.c
*
* Copyright 2003-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <net/ax88796.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <mach/fb.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
#include "simtec.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
/* macros to modify the physical addresses for io space */
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc bast_iodesc[] __initdata = {
/* ISA IO areas */
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = PA_CS2(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = PA_CS3(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
},
/* bast CPLD control registers, and external interrupt controls */
{
.virtual = (u32)BAST_VA_CTRL1,
.pfn = __phys_to_pfn(BAST_PA_CTRL1),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL2,
.pfn = __phys_to_pfn(BAST_PA_CTRL2),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL3,
.pfn = __phys_to_pfn(BAST_PA_CTRL3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL4,
.pfn = __phys_to_pfn(BAST_PA_CTRL4),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* PC104 IRQ mux */
{
.virtual = (u32)BAST_VA_PC104_IRQREQ,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQRAW,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQMASK,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers
* are only 8bit */
/* slow, byte */
{ VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
/* slow, word */
{ VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
/* fast, byte */
{ VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
/* fast, word */
{ VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
{ VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
/* port 2 is not actually used */
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
}
};
/* NAND Flash on BAST board */
#ifdef CONFIG_PM
static int bast_pm_suspend(void)
{
/* ensure that an nRESET is not generated on resume. */
gpio_direction_output(S3C2410_GPA(21), 1);
return 0;
}
static void bast_pm_resume(void)
{
s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
}
#else
#define bast_pm_suspend NULL
#define bast_pm_resume NULL
#endif
static struct syscore_ops bast_pm_syscore_ops = {
.suspend = bast_pm_suspend,
.resume = bast_pm_resume,
};
static int smartmedia_map[] = { 0 };
static int chip0_map[] = { 1 };
static int chip1_map[] = { 2 };
static int chip2_map[] = { 3 };
static struct mtd_partition __initdata bast_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
.offset = 0,
},
[1] = {
.name = "/boot",
.size = SZ_4M - SZ_16K,
.offset = SZ_16K,
},
[2] = {
.name = "user",
.offset = SZ_4M,
.size = MTDPART_SIZ_FULL,
}
};
/* the bast has 4 selectable slots for nand-flash, the three
* on-board chip areas, as well as the external SmartMedia
* slot.
*
* Note, there is no current hot-plug support for the SmartMedia
* socket.
*/
static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
[0] = {
.name = "SmartMedia",
.nr_chips = 1,
.nr_map = smartmedia_map,
.options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
[1] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
},
[3] = {
.name = "chip2",
.nr_chips = 1,
.nr_map = chip2_map,
.options = NAND_SCAN_SILENT_NODEV,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
.partitions = bast_default_nand_part,
}
};
static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
{
unsigned int tmp;
slot = set->nr_map[slot] & 3;
pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
slot, set, set->nr_map);
tmp = __raw_readb(BAST_VA_CTRL2);
tmp &= BAST_CPLD_CTLR2_IDERST;
tmp |= slot;
tmp |= BAST_CPLD_CTRL2_WNAND;
pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
__raw_writeb(tmp, BAST_VA_CTRL2);
}
static struct s3c2410_platform_nand __initdata bast_nand_info = {
.tacls = 30,
.twrph0 = 60,
.twrph1 = 60,
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
};
/* DM9000 */
static struct resource bast_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
[2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
/* for the moment we limit ourselves to 16bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data bast_dm9k_platdata = {
.flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device bast_device_dm9k = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(bast_dm9k_resource),
.resource = bast_dm9k_resource,
.dev = {
.platform_data = &bast_dm9k_platdata,
}
};
/* serial devices */
#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
#define SERIAL_CLK (1843200)
static struct plat_serial8250_port bast_sio_data[] = {
[0] = {
.mapbase = SERIAL_BASE + 0x2f8,
.irq = BAST_IRQ_PCSERIAL1,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = SERIAL_CLK,
},
[1] = {
.mapbase = SERIAL_BASE + 0x3f8,
.irq = BAST_IRQ_PCSERIAL2,
.flags = SERIAL_FLAGS,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = SERIAL_CLK,
},
{ }
};
static struct platform_device bast_sio = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = &bast_sio_data,
},
};
/* we have devices on the bus which cannot work much over the
* standard 100KHz i2c bus frequency
*/
static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
.frequency = 100*1000,
};
/* Asix AX88796 10/100 ethernet controller */
static struct ax_plat_data bast_asix_platdata = {
.flags = AXFLG_MAC_FROMDEV,
.wordlength = 2,
.dcr_val = 0x48,
.rcr_val = 0x40,
};
static struct resource bast_asix_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
[2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
};
static struct platform_device bast_device_asix = {
.name = "ax88796",
.id = 0,
.num_resources = ARRAY_SIZE(bast_asix_resource),
.resource = bast_asix_resource,
.dev = {
.platform_data = &bast_asix_platdata
}
};
/* Asix AX88796 10/100 ethernet controller parallel port */
static struct resource bast_asixpp_resource[] = {
[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
0x30 * 0x20),
};
static struct platform_device bast_device_axpp = {
.name = "ax88796-pp",
.id = 0,
.num_resources = ARRAY_SIZE(bast_asixpp_resource),
.resource = bast_asixpp_resource,
};
/* LCD/VGA controller */
static struct s3c2410fb_display __initdata bast_lcd_info[] = {
{
.type = S3C2410_LCDCON1_TFT,
.width = 640,
.height = 480,
.pixclock = 33333,
.xres = 640,
.yres = 480,
.bpp = 4,
.left_margin = 40,
.right_margin = 20,
.hsync_len = 88,
.upper_margin = 30,
.lower_margin = 32,
.vsync_len = 3,
.lcdcon5 = 0x00014b02,
},
{
.type = S3C2410_LCDCON1_TFT,
.width = 640,
.height = 480,
.pixclock = 33333,
.xres = 640,
.yres = 480,
.bpp = 8,
.left_margin = 40,
.right_margin = 20,
.hsync_len = 88,
.upper_margin = 30,
.lower_margin = 32,
.vsync_len = 3,
.lcdcon5 = 0x00014b02,
},
{
.type = S3C2410_LCDCON1_TFT,
.width = 640,
.height = 480,
.pixclock = 33333,
.xres = 640,
.yres = 480,
.bpp = 16,
.left_margin = 40,
.right_margin = 20,
.hsync_len = 88,
.upper_margin = 30,
.lower_margin = 32,
.vsync_len = 3,
.lcdcon5 = 0x00014b02,
},
};
/* LCD/VGA controller */
static struct s3c2410fb_mach_info __initdata bast_fb_info = {
.displays = bast_lcd_info,
.num_displays = ARRAY_SIZE(bast_lcd_info),
.default_display = 1,
};
/* I2C devices fitted. */
static struct i2c_board_info bast_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("tlv320aic23", 0x1a),
}, {
I2C_BOARD_INFO("simtec-pmu", 0x6b),
}, {
I2C_BOARD_INFO("ch7013", 0x75),
},
};
static struct s3c_hwmon_pdata bast_hwmon_info = {
/* LCD contrast (0-6.6V) */
.in[0] = &(struct s3c_hwmon_chcfg) {
.name = "lcd-contrast",
.mult = 3300,
.div = 512,
},
/* LED current feedback */
.in[1] = &(struct s3c_hwmon_chcfg) {
.name = "led-feedback",
.mult = 3300,
.div = 1024,
},
/* LCD feedback (0-6.6V) */
.in[2] = &(struct s3c_hwmon_chcfg) {
.name = "lcd-feedback",
.mult = 3300,
.div = 512,
},
/* Vcore (1.8-2.0V), Vref 3.3V */
.in[3] = &(struct s3c_hwmon_chcfg) {
.name = "vcore",
.mult = 3300,
.div = 1024,
},
};
/* Standard BAST devices */
// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
&s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&s3c_device_adc,
&s3c_device_hwmon,
&bast_device_dm9k,
&bast_device_asix,
&bast_device_axpp,
&bast_sio,
};
static struct s3c_cpufreq_board __initdata bast_cpufreq = {
.refresh = 7800, /* 7.8usec */
.auto_io = 1,
.need_io = 1,
};
static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
.have_mic = 1,
.have_lout = 1,
};
static void __init bast_map_io(void)
{
s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init_time(void)
{
s3c2410_init_clocks(12000000);
samsung_timer_init();
}
static void __init bast_init(void)
{
register_syscore_ops(&bast_pm_syscore_ops);
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c_nand_set_platdata(&bast_nand_info);
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
i2c_register_board_info(0, bast_i2c_devs,
ARRAY_SIZE(bast_i2c_devs));
usb_simtec_init();
nor_simtec_init();
simtec_audio_add(NULL, true, &bast_audio);
WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
s3c_cpufreq_setboard(&bast_cpufreq);
}
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = bast_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = bast_init,
.init_time = bast_init_time,
.restart = s3c2410_restart,
MACHINE_END