| /* | |
| * OpenRISC signal.c | |
| * | |
| * Linux architectural port borrowing liberally from similar works of | |
| * others. All original copyrights apply as per the original source | |
| * declaration. | |
| * | |
| * Modifications for the OpenRISC architecture: | |
| * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> | |
| * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/kernel.h> | |
| #include <linux/signal.h> | |
| #include <linux/errno.h> | |
| #include <linux/wait.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/unistd.h> | |
| #include <linux/stddef.h> | |
| #include <linux/tracehook.h> | |
| #include <asm/processor.h> | |
| #include <asm/syscall.h> | |
| #include <asm/ucontext.h> | |
| #include <asm/uaccess.h> | |
| #define DEBUG_SIG 0 | |
| struct rt_sigframe { | |
| struct siginfo info; | |
| struct ucontext uc; | |
| unsigned char retcode[16]; /* trampoline code */ | |
| }; | |
| static int restore_sigcontext(struct pt_regs *regs, | |
| struct sigcontext __user *sc) | |
| { | |
| int err = 0; | |
| /* Always make any pending restarted system calls return -EINTR */ | |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; | |
| /* | |
| * Restore the regs from &sc->regs. | |
| * (sc is already checked for VERIFY_READ since the sigframe was | |
| * checked in sys_sigreturn previously) | |
| */ | |
| err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long)); | |
| err |= __copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long)); | |
| err |= __copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long)); | |
| /* make sure the SM-bit is cleared so user-mode cannot fool us */ | |
| regs->sr &= ~SPR_SR_SM; | |
| regs->orig_gpr11 = -1; /* Avoid syscall restart checks */ | |
| /* TODO: the other ports use regs->orig_XX to disable syscall checks | |
| * after this completes, but we don't use that mechanism. maybe we can | |
| * use it now ? | |
| */ | |
| return err; | |
| } | |
| asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs) | |
| { | |
| struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp; | |
| sigset_t set; | |
| /* | |
| * Since we stacked the signal on a dword boundary, | |
| * then frame should be dword aligned here. If it's | |
| * not, then the user is trying to mess with us. | |
| */ | |
| if (((long)frame) & 3) | |
| goto badframe; | |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) | |
| goto badframe; | |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) | |
| goto badframe; | |
| set_current_blocked(&set); | |
| if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) | |
| goto badframe; | |
| if (restore_altstack(&frame->uc.uc_stack)) | |
| goto badframe; | |
| return regs->gpr[11]; | |
| badframe: | |
| force_sig(SIGSEGV, current); | |
| return 0; | |
| } | |
| /* | |
| * Set up a signal frame. | |
| */ | |
| static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) | |
| { | |
| int err = 0; | |
| /* copy the regs */ | |
| /* There should be no need to save callee-saved registers here... | |
| * ...but we save them anyway. Revisit this | |
| */ | |
| err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long)); | |
| err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long)); | |
| err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long)); | |
| return err; | |
| } | |
| static inline unsigned long align_sigframe(unsigned long sp) | |
| { | |
| return sp & ~3UL; | |
| } | |
| /* | |
| * Work out where the signal frame should go. It's either on the user stack | |
| * or the alternate stack. | |
| */ | |
| static inline void __user *get_sigframe(struct k_sigaction *ka, | |
| struct pt_regs *regs, size_t frame_size) | |
| { | |
| unsigned long sp = regs->sp; | |
| int onsigstack = on_sig_stack(sp); | |
| /* redzone */ | |
| sp -= STACK_FRAME_OVERHEAD; | |
| /* This is the X/Open sanctioned signal stack switching. */ | |
| if ((ka->sa.sa_flags & SA_ONSTACK) && !onsigstack) { | |
| if (current->sas_ss_size) | |
| sp = current->sas_ss_sp + current->sas_ss_size; | |
| } | |
| sp = align_sigframe(sp - frame_size); | |
| /* | |
| * If we are on the alternate signal stack and would overflow it, don't. | |
| * Return an always-bogus address instead so we will die with SIGSEGV. | |
| */ | |
| if (onsigstack && !likely(on_sig_stack(sp))) | |
| return (void __user *)-1L; | |
| return (void __user *)sp; | |
| } | |
| /* grab and setup a signal frame. | |
| * | |
| * basically we stack a lot of state info, and arrange for the | |
| * user-mode program to return to the kernel using either a | |
| * trampoline which performs the syscall sigreturn, or a provided | |
| * user-mode trampoline. | |
| */ | |
| static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, | |
| struct pt_regs *regs) | |
| { | |
| struct rt_sigframe *frame; | |
| unsigned long return_ip; | |
| int err = 0; | |
| frame = get_sigframe(&ksig->ka, regs, sizeof(*frame)); | |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) | |
| return -EFAULT; | |
| /* Create siginfo. */ | |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) | |
| err |= copy_siginfo_to_user(&frame->info, &ksig->info); | |
| /* Create the ucontext. */ | |
| err |= __put_user(0, &frame->uc.uc_flags); | |
| err |= __put_user(NULL, &frame->uc.uc_link); | |
| err |= __save_altstack(&frame->uc.uc_stack, regs->sp); | |
| err |= setup_sigcontext(regs, &frame->uc.uc_mcontext); | |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); | |
| if (err) | |
| return -EFAULT; | |
| /* trampoline - the desired return ip is the retcode itself */ | |
| return_ip = (unsigned long)&frame->retcode; | |
| /* This is: | |
| l.ori r11,r0,__NR_sigreturn | |
| l.sys 1 | |
| */ | |
| err |= __put_user(0xa960, (short *)(frame->retcode + 0)); | |
| err |= __put_user(__NR_rt_sigreturn, (short *)(frame->retcode + 2)); | |
| err |= __put_user(0x20000001, (unsigned long *)(frame->retcode + 4)); | |
| err |= __put_user(0x15000000, (unsigned long *)(frame->retcode + 8)); | |
| if (err) | |
| return -EFAULT; | |
| /* TODO what is the current->exec_domain stuff and invmap ? */ | |
| /* Set up registers for signal handler */ | |
| regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */ | |
| regs->gpr[9] = (unsigned long)return_ip; /* what we enter LATER */ | |
| regs->gpr[3] = (unsigned long)ksig->sig; /* arg 1: signo */ | |
| regs->gpr[4] = (unsigned long)&frame->info; /* arg 2: (siginfo_t*) */ | |
| regs->gpr[5] = (unsigned long)&frame->uc; /* arg 3: ucontext */ | |
| /* actually move the usp to reflect the stacked frame */ | |
| regs->sp = (unsigned long)frame; | |
| return 0; | |
| } | |
| static inline void | |
| handle_signal(struct ksignal *ksig, struct pt_regs *regs) | |
| { | |
| int ret; | |
| ret = setup_rt_frame(ksig, sigmask_to_save(), regs); | |
| signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); | |
| } | |
| /* | |
| * Note that 'init' is a special process: it doesn't get signals it doesn't | |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by | |
| * mistake. | |
| * | |
| * Also note that the regs structure given here as an argument, is the latest | |
| * pushed pt_regs. It may or may not be the same as the first pushed registers | |
| * when the initial usermode->kernelmode transition took place. Therefore | |
| * we can use user_mode(regs) to see if we came directly from kernel or user | |
| * mode below. | |
| */ | |
| int do_signal(struct pt_regs *regs, int syscall) | |
| { | |
| struct ksignal ksig; | |
| unsigned long continue_addr = 0; | |
| unsigned long restart_addr = 0; | |
| unsigned long retval = 0; | |
| int restart = 0; | |
| if (syscall) { | |
| continue_addr = regs->pc; | |
| restart_addr = continue_addr - 4; | |
| retval = regs->gpr[11]; | |
| /* | |
| * Setup syscall restart here so that a debugger will | |
| * see the already changed PC. | |
| */ | |
| switch (retval) { | |
| case -ERESTART_RESTARTBLOCK: | |
| restart = -2; | |
| /* Fall through */ | |
| case -ERESTARTNOHAND: | |
| case -ERESTARTSYS: | |
| case -ERESTARTNOINTR: | |
| restart++; | |
| regs->gpr[11] = regs->orig_gpr11; | |
| regs->pc = restart_addr; | |
| break; | |
| } | |
| } | |
| /* | |
| * Get the signal to deliver. During the call to get_signal the | |
| * debugger may change all our registers so we may need to revert | |
| * the decision to restart the syscall; specifically, if the PC is | |
| * changed, don't restart the syscall. | |
| */ | |
| if (get_signal(&ksig)) { | |
| if (unlikely(restart) && regs->pc == restart_addr) { | |
| if (retval == -ERESTARTNOHAND || | |
| retval == -ERESTART_RESTARTBLOCK | |
| || (retval == -ERESTARTSYS | |
| && !(ksig.ka.sa.sa_flags & SA_RESTART))) { | |
| /* No automatic restart */ | |
| regs->gpr[11] = -EINTR; | |
| regs->pc = continue_addr; | |
| } | |
| } | |
| handle_signal(&ksig, regs); | |
| } else { | |
| /* no handler */ | |
| restore_saved_sigmask(); | |
| /* | |
| * Restore pt_regs PC as syscall restart will be handled by | |
| * kernel without return to userspace | |
| */ | |
| if (unlikely(restart) && regs->pc == restart_addr) { | |
| regs->pc = continue_addr; | |
| return restart; | |
| } | |
| } | |
| return 0; | |
| } | |
| asmlinkage int | |
| do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) | |
| { | |
| do { | |
| if (likely(thread_flags & _TIF_NEED_RESCHED)) { | |
| schedule(); | |
| } else { | |
| if (unlikely(!user_mode(regs))) | |
| return 0; | |
| local_irq_enable(); | |
| if (thread_flags & _TIF_SIGPENDING) { | |
| int restart = do_signal(regs, syscall); | |
| if (unlikely(restart)) { | |
| /* | |
| * Restart without handlers. | |
| * Deal with it without leaving | |
| * the kernel space. | |
| */ | |
| return restart; | |
| } | |
| syscall = 0; | |
| } else { | |
| clear_thread_flag(TIF_NOTIFY_RESUME); | |
| tracehook_notify_resume(regs); | |
| } | |
| } | |
| local_irq_disable(); | |
| thread_flags = current_thread_info()->flags; | |
| } while (thread_flags & _TIF_WORK_MASK); | |
| return 0; | |
| } |