drivers/input/misc/twl6040-vibra.c - arm/linux-arm64-legacy - Git at Google

 /*
  * twl6040-vibra.c - TWL6040 Vibrator driver
  *
  * Author:      Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
  * Author:      Misael Lopez Cruz <misael.lopez@ti.com>
  *
  * Copyright:   (C) 2011 Texas Instruments, Inc.
  *
  * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
  *				Felipe Balbi <felipe.balbi@nokia.com>
  *				Jari Vanhala <ext-javi.vanhala@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  * 02110-1301 USA
  *
  */
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/workqueue.h>
 #include <linux/input.h>
 #include <linux/mfd/twl6040.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>

 #define EFFECT_DIR_180_DEG	0x8000

 /* Recommended modulation index 85% */
 #define TWL6040_VIBRA_MOD	85

 #define TWL6040_NUM_SUPPLIES 2

 struct vibra_info {
 	struct device *dev;
 	struct input_dev *input_dev;
 	struct workqueue_struct *workqueue;
 	struct work_struct play_work;
 	struct mutex mutex;
 	int irq;

 	bool enabled;
 	int weak_speed;
 	int strong_speed;
 	int direction;

 	unsigned int vibldrv_res;
 	unsigned int vibrdrv_res;
 	unsigned int viblmotor_res;
 	unsigned int vibrmotor_res;

 	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];

 	struct twl6040 *twl6040;
 };

 static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
 {
 	struct vibra_info *info = data;
 	struct twl6040 *twl6040 = info->twl6040;
 	u8 status;

 	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 	if (status & TWL6040_VIBLOCDET) {
 		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
 				   TWL6040_VIBENA);
 	}
 	if (status & TWL6040_VIBROCDET) {
 		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
 				   TWL6040_VIBENA);
 	}

 	return IRQ_HANDLED;
 }

 static void twl6040_vibra_enable(struct vibra_info *info)
 {
 	struct twl6040 *twl6040 = info->twl6040;
 	int ret;

 	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
 	if (ret) {
 		dev_err(info->dev, "failed to enable regulators %d\n", ret);
 		return;
 	}

 	twl6040_power(info->twl6040, 1);
 	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
 		/*
 		 * ERRATA: Disable overcurrent protection for at least
 		 * 3ms when enabling vibrator drivers to avoid false
 		 * overcurrent detection
 		 */
 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
 				  TWL6040_VIBENA | TWL6040_VIBCTRL);
 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
 				  TWL6040_VIBENA | TWL6040_VIBCTRL);
 		usleep_range(3000, 3500);
 	}

 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
 			  TWL6040_VIBENA);
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
 			  TWL6040_VIBENA);

 	info->enabled = true;
 }

 static void twl6040_vibra_disable(struct vibra_info *info)
 {
 	struct twl6040 *twl6040 = info->twl6040;

 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
 	twl6040_power(info->twl6040, 0);

 	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);

 	info->enabled = false;
 }

 static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
 			     int speed, int direction)
 {
 	int vpk, max_code;
 	u8 vibdat;

 	/* output swing */
 	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
 		(100 * (vibdrv_res + motor_res));

 	/* 50mV per VIBDAT code step */
 	max_code = vpk / 50;
 	if (max_code > TWL6040_VIBDAT_MAX)
 		max_code = TWL6040_VIBDAT_MAX;

 	/* scale speed to max allowed code */
 	vibdat = (u8)((speed * max_code) / USHRT_MAX);

 	/* 2's complement for direction > 180 degrees */
 	vibdat *= direction;

 	return vibdat;
 }

 static void twl6040_vibra_set_effect(struct vibra_info *info)
 {
 	struct twl6040 *twl6040 = info->twl6040;
 	u8 vibdatl, vibdatr;
 	int volt;

 	/* weak motor */
 	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
 	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
 				     info->viblmotor_res,
 				     info->weak_speed, info->direction);

 	/* strong motor */
 	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
 	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
 				     info->vibrmotor_res,
 				     info->strong_speed, info->direction);

 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
 }

 static void vibra_play_work(struct work_struct *work)
 {
 	struct vibra_info *info = container_of(work,
 				struct vibra_info, play_work);

 	mutex_lock(&info->mutex);

 	if (info->weak_speed || info->strong_speed) {
 		if (!info->enabled)
 			twl6040_vibra_enable(info);

 		twl6040_vibra_set_effect(info);
 	} else if (info->enabled)
 		twl6040_vibra_disable(info);

 	mutex_unlock(&info->mutex);
 }

 static int vibra_play(struct input_dev *input, void *data,
 		      struct ff_effect *effect)
 {
 	struct vibra_info *info = input_get_drvdata(input);
 	int ret;

 	/* Do not allow effect, while the routing is set to use audio */
 	ret = twl6040_get_vibralr_status(info->twl6040);
 	if (ret & TWL6040_VIBSEL) {
 		dev_info(&input->dev, "Vibra is configured for audio\n");
 		return -EBUSY;
 	}

 	info->weak_speed = effect->u.rumble.weak_magnitude;
 	info->strong_speed = effect->u.rumble.strong_magnitude;
 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;

 	ret = queue_work(info->workqueue, &info->play_work);
 	if (!ret) {
 		dev_info(&input->dev, "work is already on queue\n");
 		return ret;
 	}

 	return 0;
 }

 static void twl6040_vibra_close(struct input_dev *input)
 {
 	struct vibra_info *info = input_get_drvdata(input);

 	cancel_work_sync(&info->play_work);

 	mutex_lock(&info->mutex);

 	if (info->enabled)
 		twl6040_vibra_disable(info);

 	mutex_unlock(&info->mutex);
 }

 #ifdef CONFIG_PM_SLEEP
 static int twl6040_vibra_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct vibra_info *info = platform_get_drvdata(pdev);

 	mutex_lock(&info->mutex);

 	if (info->enabled)
 		twl6040_vibra_disable(info);

 	mutex_unlock(&info->mutex);

 	return 0;
 }
 #endif

 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);

 static int twl6040_vibra_probe(struct platform_device *pdev)
 {
 	struct device *twl6040_core_dev = pdev->dev.parent;
 	struct device_node *twl6040_core_node;
 	struct vibra_info *info;
 	int vddvibl_uV = 0;
 	int vddvibr_uV = 0;
 	int error;

 	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
 						 "vibra");
 	if (!twl6040_core_node) {
 		dev_err(&pdev->dev, "parent of node is missing?\n");
 		return -EINVAL;
 	}

 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		of_node_put(twl6040_core_node);
 		dev_err(&pdev->dev, "couldn't allocate memory\n");
 		return -ENOMEM;
 	}

 	info->dev = &pdev->dev;

 	info->twl6040 = dev_get_drvdata(pdev->dev.parent);

 	of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
 			     &info->vibldrv_res);
 	of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
 			     &info->vibrdrv_res);
 	of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
 			     &info->viblmotor_res);
 	of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
 			     &info->vibrmotor_res);
 	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
 	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);

 	of_node_put(twl6040_core_node);

 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
 		return -EINVAL;
 	}

 	info->irq = platform_get_irq(pdev, 0);
 	if (info->irq < 0) {
 		dev_err(info->dev, "invalid irq\n");
 		return -EINVAL;
 	}

 	mutex_init(&info->mutex);

 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
 					  twl6040_vib_irq_handler, 0,
 					  "twl6040_irq_vib", info);
 	if (error) {
 		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
 		return error;
 	}

 	info->supplies[0].supply = "vddvibl";
 	info->supplies[1].supply = "vddvibr";
 	/*
 	 * When booted with Device tree the regulators are attached to the
 	 * parent device (twl6040 MFD core)
 	 */
 	error = devm_regulator_bulk_get(twl6040_core_dev,
 					ARRAY_SIZE(info->supplies),
 					info->supplies);
 	if (error) {
 		dev_err(info->dev, "couldn't get regulators %d\n", error);
 		return error;
 	}

 	if (vddvibl_uV) {
 		error = regulator_set_voltage(info->supplies[0].consumer,
 					      vddvibl_uV, vddvibl_uV);
 		if (error) {
 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
 				error);
 			return error;
 		}
 	}

 	if (vddvibr_uV) {
 		error = regulator_set_voltage(info->supplies[1].consumer,
 					      vddvibr_uV, vddvibr_uV);
 		if (error) {
 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
 				error);
 			return error;
 		}
 	}

 	INIT_WORK(&info->play_work, vibra_play_work);

 	info->input_dev = devm_input_allocate_device(&pdev->dev);
 	if (!info->input_dev) {
 		dev_err(info->dev, "couldn't allocate input device\n");
 		return -ENOMEM;
 	}

 	input_set_drvdata(info->input_dev, info);

 	info->input_dev->name = "twl6040:vibrator";
 	info->input_dev->id.version = 1;
 	info->input_dev->dev.parent = pdev->dev.parent;
 	info->input_dev->close = twl6040_vibra_close;
 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);

 	error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
 	if (error) {
 		dev_err(info->dev, "couldn't register vibrator to FF\n");
 		return error;
 	}

 	error = input_register_device(info->input_dev);
 	if (error) {
 		dev_err(info->dev, "couldn't register input device\n");
 		return error;
 	}

 	platform_set_drvdata(pdev, info);

 	return 0;
 }

 static struct platform_driver twl6040_vibra_driver = {
 	.probe		= twl6040_vibra_probe,
 	.driver		= {
 		.name	= "twl6040-vibra",
 		.owner	= THIS_MODULE,
 		.pm	= &twl6040_vibra_pm_ops,
 	},
 };
 module_platform_driver(twl6040_vibra_driver);

 MODULE_ALIAS("platform:twl6040-vibra");
 MODULE_DESCRIPTION("TWL6040 Vibra driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
	/*
	* twl6040-vibra.c - TWL6040 Vibrator driver
	*
	* Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
	* Author: Misael Lopez Cruz <misael.lopez@ti.com>
	*
	* Copyright: (C) 2011 Texas Instruments, Inc.
	*
	* Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
	* Felipe Balbi <felipe.balbi@nokia.com>
	* Jari Vanhala <ext-javi.vanhala@nokia.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
	* 02110-1301 USA
	*
	*/
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/of.h>
	#include <linux/workqueue.h>
	#include <linux/input.h>
	#include <linux/mfd/twl6040.h>
	#include <linux/slab.h>
	#include <linux/delay.h>
	#include <linux/regulator/consumer.h>

	#define EFFECT_DIR_180_DEG 0x8000

	/* Recommended modulation index 85% */
	#define TWL6040_VIBRA_MOD 85

	#define TWL6040_NUM_SUPPLIES 2

	struct vibra_info {
	struct device *dev;
	struct input_dev *input_dev;
	struct workqueue_struct *workqueue;
	struct work_struct play_work;
	struct mutex mutex;
	int irq;

	bool enabled;
	int weak_speed;
	int strong_speed;
	int direction;

	unsigned int vibldrv_res;
	unsigned int vibrdrv_res;
	unsigned int viblmotor_res;
	unsigned int vibrmotor_res;

	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];

	struct twl6040 *twl6040;
	};

	static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
	{
	struct vibra_info *info = data;
	struct twl6040 *twl6040 = info->twl6040;
	u8 status;

	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
	if (status & TWL6040_VIBLOCDET) {
	dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
	twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
	TWL6040_VIBENA);
	}
	if (status & TWL6040_VIBROCDET) {
	dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
	twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
	TWL6040_VIBENA);
	}

	return IRQ_HANDLED;
	}

	static void twl6040_vibra_enable(struct vibra_info *info)
	{
	struct twl6040 *twl6040 = info->twl6040;
	int ret;

	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
	if (ret) {
	dev_err(info->dev, "failed to enable regulators %d\n", ret);
	return;
	}

	twl6040_power(info->twl6040, 1);
	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
	/*
	* ERRATA: Disable overcurrent protection for at least
	* 3ms when enabling vibrator drivers to avoid false
	* overcurrent detection
	*/
	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
	TWL6040_VIBENA \| TWL6040_VIBCTRL);
	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
	TWL6040_VIBENA \| TWL6040_VIBCTRL);
	usleep_range(3000, 3500);
	}

	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
	TWL6040_VIBENA);
	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
	TWL6040_VIBENA);

	info->enabled = true;
	}

	static void twl6040_vibra_disable(struct vibra_info *info)
	{
	struct twl6040 *twl6040 = info->twl6040;

	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
	twl6040_power(info->twl6040, 0);

	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);

	info->enabled = false;
	}

	static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
	int speed, int direction)
	{
	int vpk, max_code;
	u8 vibdat;

	/* output swing */
	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
	(100 * (vibdrv_res + motor_res));

	/* 50mV per VIBDAT code step */
	max_code = vpk / 50;
	if (max_code > TWL6040_VIBDAT_MAX)
	max_code = TWL6040_VIBDAT_MAX;

	/* scale speed to max allowed code */
	vibdat = (u8)((speed * max_code) / USHRT_MAX);

	/* 2's complement for direction > 180 degrees */
	vibdat *= direction;

	return vibdat;
	}

	static void twl6040_vibra_set_effect(struct vibra_info *info)
	{
	struct twl6040 *twl6040 = info->twl6040;
	u8 vibdatl, vibdatr;
	int volt;

	/* weak motor */
	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
	info->viblmotor_res,
	info->weak_speed, info->direction);

	/* strong motor */
	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
	info->vibrmotor_res,
	info->strong_speed, info->direction);

	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
	}

	static void vibra_play_work(struct work_struct *work)
	{
	struct vibra_info *info = container_of(work,
	struct vibra_info, play_work);

	mutex_lock(&info->mutex);

	if (info->weak_speed \|\| info->strong_speed) {
	if (!info->enabled)
	twl6040_vibra_enable(info);

	twl6040_vibra_set_effect(info);
	} else if (info->enabled)
	twl6040_vibra_disable(info);

	mutex_unlock(&info->mutex);
	}

	static int vibra_play(struct input_dev input, void data,
	struct ff_effect *effect)
	{
	struct vibra_info *info = input_get_drvdata(input);
	int ret;

	/* Do not allow effect, while the routing is set to use audio */
	ret = twl6040_get_vibralr_status(info->twl6040);
	if (ret & TWL6040_VIBSEL) {
	dev_info(&input->dev, "Vibra is configured for audio\n");
	return -EBUSY;
	}

	info->weak_speed = effect->u.rumble.weak_magnitude;
	info->strong_speed = effect->u.rumble.strong_magnitude;
	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;

	ret = queue_work(info->workqueue, &info->play_work);
	if (!ret) {
	dev_info(&input->dev, "work is already on queue\n");
	return ret;
	}

	return 0;
	}

	static void twl6040_vibra_close(struct input_dev *input)
	{
	struct vibra_info *info = input_get_drvdata(input);

	cancel_work_sync(&info->play_work);

	mutex_lock(&info->mutex);

	if (info->enabled)
	twl6040_vibra_disable(info);

	mutex_unlock(&info->mutex);
	}

	#ifdef CONFIG_PM_SLEEP
	static int twl6040_vibra_suspend(struct device *dev)
	{
	struct platform_device *pdev = to_platform_device(dev);
	struct vibra_info *info = platform_get_drvdata(pdev);

	mutex_lock(&info->mutex);

	if (info->enabled)
	twl6040_vibra_disable(info);

	mutex_unlock(&info->mutex);

	return 0;
	}
	#endif

	static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);

	static int twl6040_vibra_probe(struct platform_device *pdev)
	{
	struct device *twl6040_core_dev = pdev->dev.parent;
	struct device_node *twl6040_core_node;
	struct vibra_info *info;
	int vddvibl_uV = 0;
	int vddvibr_uV = 0;
	int error;

	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
	"vibra");
	if (!twl6040_core_node) {
	dev_err(&pdev->dev, "parent of node is missing?\n");
	return -EINVAL;
	}

	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
	if (!info) {
	of_node_put(twl6040_core_node);
	dev_err(&pdev->dev, "couldn't allocate memory\n");
	return -ENOMEM;
	}

	info->dev = &pdev->dev;

	info->twl6040 = dev_get_drvdata(pdev->dev.parent);

	of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
	&info->vibldrv_res);
	of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
	&info->vibrdrv_res);
	of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
	&info->viblmotor_res);
	of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
	&info->vibrmotor_res);
	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);

	of_node_put(twl6040_core_node);

	if ((!info->vibldrv_res && !info->viblmotor_res) \|\|
	(!info->vibrdrv_res && !info->vibrmotor_res)) {
	dev_err(info->dev, "invalid vibra driver/motor resistance\n");
	return -EINVAL;
	}

	info->irq = platform_get_irq(pdev, 0);
	if (info->irq < 0) {
	dev_err(info->dev, "invalid irq\n");
	return -EINVAL;
	}

	mutex_init(&info->mutex);

	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
	twl6040_vib_irq_handler, 0,
	"twl6040_irq_vib", info);
	if (error) {
	dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
	return error;
	}

	info->supplies[0].supply = "vddvibl";
	info->supplies[1].supply = "vddvibr";
	/*
	* When booted with Device tree the regulators are attached to the
	* parent device (twl6040 MFD core)
	*/
	error = devm_regulator_bulk_get(twl6040_core_dev,
	ARRAY_SIZE(info->supplies),
	info->supplies);
	if (error) {
	dev_err(info->dev, "couldn't get regulators %d\n", error);
	return error;
	}

	if (vddvibl_uV) {
	error = regulator_set_voltage(info->supplies[0].consumer,
	vddvibl_uV, vddvibl_uV);
	if (error) {
	dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
	error);
	return error;
	}
	}

	if (vddvibr_uV) {
	error = regulator_set_voltage(info->supplies[1].consumer,
	vddvibr_uV, vddvibr_uV);
	if (error) {
	dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
	error);
	return error;
	}
	}

	INIT_WORK(&info->play_work, vibra_play_work);

	info->input_dev = devm_input_allocate_device(&pdev->dev);
	if (!info->input_dev) {
	dev_err(info->dev, "couldn't allocate input device\n");
	return -ENOMEM;
	}

	input_set_drvdata(info->input_dev, info);

	info->input_dev->name = "twl6040:vibrator";
	info->input_dev->id.version = 1;
	info->input_dev->dev.parent = pdev->dev.parent;
	info->input_dev->close = twl6040_vibra_close;
	__set_bit(FF_RUMBLE, info->input_dev->ffbit);

	error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
	if (error) {
	dev_err(info->dev, "couldn't register vibrator to FF\n");
	return error;
	}

	error = input_register_device(info->input_dev);
	if (error) {
	dev_err(info->dev, "couldn't register input device\n");
	return error;
	}

	platform_set_drvdata(pdev, info);

	return 0;
	}

	static struct platform_driver twl6040_vibra_driver = {
	.probe = twl6040_vibra_probe,
	.driver = {
	.name = "twl6040-vibra",
	.owner = THIS_MODULE,
	.pm = &twl6040_vibra_pm_ops,
	},
	};
	module_platform_driver(twl6040_vibra_driver);

	MODULE_ALIAS("platform:twl6040-vibra");
	MODULE_DESCRIPTION("TWL6040 Vibra driver");
	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
	MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");