drivers/misc/mei/init.c - arm/linux-arm64-legacy - Git at Google

 /*
  *
  * Intel Management Engine Interface (Intel MEI) Linux driver
  * Copyright (c) 2003-2012, Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  */

 #include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/delay.h>

 #include <linux/mei.h>

 #include "mei_dev.h"
 #include "hbm.h"
 #include "client.h"

 const char *mei_dev_state_str(int state)
 {
 #define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
 	switch (state) {
 	MEI_DEV_STATE(INITIALIZING);
 	MEI_DEV_STATE(INIT_CLIENTS);
 	MEI_DEV_STATE(ENABLED);
 	MEI_DEV_STATE(RESETTING);
 	MEI_DEV_STATE(DISABLED);
 	MEI_DEV_STATE(POWER_DOWN);
 	MEI_DEV_STATE(POWER_UP);
 	default:
 		return "unknown";
 	}
 #undef MEI_DEV_STATE
 }


 /**
  * mei_cancel_work. Cancel mei background jobs
  *
  * @dev: the device structure
  *
  * returns 0 on success or < 0 if the reset hasn't succeeded
  */
 void mei_cancel_work(struct mei_device *dev)
 {
 	cancel_work_sync(&dev->init_work);
 	cancel_work_sync(&dev->reset_work);

 	cancel_delayed_work(&dev->timer_work);
 }
 EXPORT_SYMBOL_GPL(mei_cancel_work);

 /**
  * mei_reset - resets host and fw.
  *
  * @dev: the device structure
  */
 int mei_reset(struct mei_device *dev)
 {
 	enum mei_dev_state state = dev->dev_state;
 	bool interrupts_enabled;
 	int ret;

 	if (state != MEI_DEV_INITIALIZING &&
 	    state != MEI_DEV_DISABLED &&
 	    state != MEI_DEV_POWER_DOWN &&
 	    state != MEI_DEV_POWER_UP) {
 		struct mei_fw_status fw_status;
 		mei_fw_status(dev, &fw_status);
 		dev_warn(&dev->pdev->dev,
 			"unexpected reset: dev_state = %s " FW_STS_FMT "\n",
 			mei_dev_state_str(state), FW_STS_PRM(fw_status));
 	}

 	/* we're already in reset, cancel the init timer
 	 * if the reset was called due the hbm protocol error
 	 * we need to call it before hw start
 	 * so the hbm watchdog won't kick in
 	 */
 	mei_hbm_idle(dev);

 	/* enter reset flow */
 	interrupts_enabled = state != MEI_DEV_POWER_DOWN;
 	dev->dev_state = MEI_DEV_RESETTING;

 	dev->reset_count++;
 	if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
 		dev_err(&dev->pdev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
 		dev->dev_state = MEI_DEV_DISABLED;
 		return -ENODEV;
 	}

 	ret = mei_hw_reset(dev, interrupts_enabled);
 	/* fall through and remove the sw state even if hw reset has failed */

 	/* no need to clean up software state in case of power up */
 	if (state != MEI_DEV_INITIALIZING &&
 	    state != MEI_DEV_POWER_UP) {

 		/* remove all waiting requests */
 		mei_cl_all_write_clear(dev);

 		mei_cl_all_disconnect(dev);

 		/* wake up all readers and writers so they can be interrupted */
 		mei_cl_all_wakeup(dev);

 		/* remove entry if already in list */
 		dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
 		mei_cl_unlink(&dev->wd_cl);
 		mei_cl_unlink(&dev->iamthif_cl);
 		mei_amthif_reset_params(dev);
 	}

 	mei_hbm_reset(dev);

 	dev->rd_msg_hdr = 0;
 	dev->wd_pending = false;

 	if (ret) {
 		dev_err(&dev->pdev->dev, "hw_reset failed ret = %d\n", ret);
 		return ret;
 	}

 	if (state == MEI_DEV_POWER_DOWN) {
 		dev_dbg(&dev->pdev->dev, "powering down: end of reset\n");
 		dev->dev_state = MEI_DEV_DISABLED;
 		return 0;
 	}

 	ret = mei_hw_start(dev);
 	if (ret) {
 		dev_err(&dev->pdev->dev, "hw_start failed ret = %d\n", ret);
 		return ret;
 	}

 	dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n");

 	dev->dev_state = MEI_DEV_INIT_CLIENTS;
 	ret = mei_hbm_start_req(dev);
 	if (ret) {
 		dev_err(&dev->pdev->dev, "hbm_start failed ret = %d\n", ret);
 		dev->dev_state = MEI_DEV_RESETTING;
 		return ret;
 	}

 	return 0;
 }
 EXPORT_SYMBOL_GPL(mei_reset);

 /**
  * mei_start - initializes host and fw to start work.
  *
  * @dev: the device structure
  *
  * returns 0 on success, <0 on failure.
  */
 int mei_start(struct mei_device *dev)
 {
 	int ret;
 	mutex_lock(&dev->device_lock);

 	/* acknowledge interrupt and stop interrupts */
 	mei_clear_interrupts(dev);

 	mei_hw_config(dev);

 	dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");

 	dev->reset_count = 0;
 	do {
 		dev->dev_state = MEI_DEV_INITIALIZING;
 		ret = mei_reset(dev);

 		if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
 			dev_err(&dev->pdev->dev, "reset failed ret = %d", ret);
 			goto err;
 		}
 	} while (ret);

 	/* we cannot start the device w/o hbm start message completed */
 	if (dev->dev_state == MEI_DEV_DISABLED) {
 		dev_err(&dev->pdev->dev, "reset failed");
 		goto err;
 	}

 	if (mei_hbm_start_wait(dev)) {
 		dev_err(&dev->pdev->dev, "HBM haven't started");
 		goto err;
 	}

 	if (!mei_host_is_ready(dev)) {
 		dev_err(&dev->pdev->dev, "host is not ready.\n");
 		goto err;
 	}

 	if (!mei_hw_is_ready(dev)) {
 		dev_err(&dev->pdev->dev, "ME is not ready.\n");
 		goto err;
 	}

 	if (!mei_hbm_version_is_supported(dev)) {
 		dev_dbg(&dev->pdev->dev, "MEI start failed.\n");
 		goto err;
 	}

 	dev_dbg(&dev->pdev->dev, "link layer has been established.\n");

 	mutex_unlock(&dev->device_lock);
 	return 0;
 err:
 	dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
 	dev->dev_state = MEI_DEV_DISABLED;
 	mutex_unlock(&dev->device_lock);
 	return -ENODEV;
 }
 EXPORT_SYMBOL_GPL(mei_start);

 /**
  * mei_restart - restart device after suspend
  *
  * @dev: the device structure
  *
  * returns 0 on success or -ENODEV if the restart hasn't succeeded
  */
 int mei_restart(struct mei_device *dev)
 {
 	int err;

 	mutex_lock(&dev->device_lock);

 	mei_clear_interrupts(dev);

 	dev->dev_state = MEI_DEV_POWER_UP;
 	dev->reset_count = 0;

 	err = mei_reset(dev);

 	mutex_unlock(&dev->device_lock);

 	if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
 		dev_err(&dev->pdev->dev, "device disabled = %d\n", err);
 		return -ENODEV;
 	}

 	/* try to start again */
 	if (err)
 		schedule_work(&dev->reset_work);


 	return 0;
 }
 EXPORT_SYMBOL_GPL(mei_restart);

 static void mei_reset_work(struct work_struct *work)
 {
 	struct mei_device *dev =
 		container_of(work, struct mei_device,  reset_work);
 	int ret;

 	mutex_lock(&dev->device_lock);

 	ret = mei_reset(dev);

 	mutex_unlock(&dev->device_lock);

 	if (dev->dev_state == MEI_DEV_DISABLED) {
 		dev_err(&dev->pdev->dev, "device disabled = %d\n", ret);
 		return;
 	}

 	/* retry reset in case of failure */
 	if (ret)
 		schedule_work(&dev->reset_work);
 }

 void mei_stop(struct mei_device *dev)
 {
 	dev_dbg(&dev->pdev->dev, "stopping the device.\n");

 	mei_cancel_work(dev);

 	mei_nfc_host_exit(dev);

 	mei_cl_bus_remove_devices(dev);

 	mutex_lock(&dev->device_lock);

 	mei_wd_stop(dev);

 	dev->dev_state = MEI_DEV_POWER_DOWN;
 	mei_reset(dev);

 	mutex_unlock(&dev->device_lock);

 	mei_watchdog_unregister(dev);
 }
 EXPORT_SYMBOL_GPL(mei_stop);

 /**
  * mei_write_is_idle - check if the write queues are idle
  *
  * @dev: the device structure
  *
  * returns true of there is no pending write
  */
 bool mei_write_is_idle(struct mei_device *dev)
 {
 	bool idle = (dev->dev_state == MEI_DEV_ENABLED &&
 		list_empty(&dev->ctrl_wr_list.list) &&
 		list_empty(&dev->write_list.list));

 	dev_dbg(&dev->pdev->dev, "write pg: is idle[%d] state=%s ctrl=%d write=%d\n",
 		idle,
 		mei_dev_state_str(dev->dev_state),
 		list_empty(&dev->ctrl_wr_list.list),
 		list_empty(&dev->write_list.list));

 	return idle;
 }
 EXPORT_SYMBOL_GPL(mei_write_is_idle);

 int mei_fw_status(struct mei_device *dev, struct mei_fw_status *fw_status)
 {
 	int i;
 	const struct mei_fw_status *fw_src = &dev->cfg->fw_status;

 	if (!fw_status)
 		return -EINVAL;

 	fw_status->count = fw_src->count;
 	for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
 		int ret;
 		ret = pci_read_config_dword(dev->pdev,
 			fw_src->status[i], &fw_status->status[i]);
 		if (ret)
 			return ret;
 	}

 	return 0;
 }
 EXPORT_SYMBOL_GPL(mei_fw_status);

 void mei_device_init(struct mei_device *dev, const struct mei_cfg *cfg)
 {
 	/* setup our list array */
 	INIT_LIST_HEAD(&dev->file_list);
 	INIT_LIST_HEAD(&dev->device_list);
 	mutex_init(&dev->device_lock);
 	init_waitqueue_head(&dev->wait_hw_ready);
 	init_waitqueue_head(&dev->wait_pg);
 	init_waitqueue_head(&dev->wait_recvd_msg);
 	init_waitqueue_head(&dev->wait_stop_wd);
 	dev->dev_state = MEI_DEV_INITIALIZING;
 	dev->reset_count = 0;

 	mei_io_list_init(&dev->read_list);
 	mei_io_list_init(&dev->write_list);
 	mei_io_list_init(&dev->write_waiting_list);
 	mei_io_list_init(&dev->ctrl_wr_list);
 	mei_io_list_init(&dev->ctrl_rd_list);

 	INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
 	INIT_WORK(&dev->init_work, mei_host_client_init);
 	INIT_WORK(&dev->reset_work, mei_reset_work);

 	INIT_LIST_HEAD(&dev->wd_cl.link);
 	INIT_LIST_HEAD(&dev->iamthif_cl.link);
 	mei_io_list_init(&dev->amthif_cmd_list);
 	mei_io_list_init(&dev->amthif_rd_complete_list);

 	bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
 	dev->open_handle_count = 0;

 	/*
 	 * Reserving the first client ID
 	 * 0: Reserved for MEI Bus Message communications
 	 */
 	bitmap_set(dev->host_clients_map, 0, 1);

 	dev->pg_event = MEI_PG_EVENT_IDLE;
 	dev->cfg      = cfg;
 }
 EXPORT_SYMBOL_GPL(mei_device_init);
	/*
	*
	* Intel Management Engine Interface (Intel MEI) Linux driver
	* Copyright (c) 2003-2012, Intel Corporation.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	*/

	#include <linux/export.h>
	#include <linux/pci.h>
	#include <linux/sched.h>
	#include <linux/wait.h>
	#include <linux/delay.h>

	#include <linux/mei.h>

	#include "mei_dev.h"
	#include "hbm.h"
	#include "client.h"

	const char *mei_dev_state_str(int state)
	{
	#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
	switch (state) {
	MEI_DEV_STATE(INITIALIZING);
	MEI_DEV_STATE(INIT_CLIENTS);
	MEI_DEV_STATE(ENABLED);
	MEI_DEV_STATE(RESETTING);
	MEI_DEV_STATE(DISABLED);
	MEI_DEV_STATE(POWER_DOWN);
	MEI_DEV_STATE(POWER_UP);
	default:
	return "unknown";
	}
	#undef MEI_DEV_STATE
	}


	/**
	* mei_cancel_work. Cancel mei background jobs
	*
	* @dev: the device structure
	*
	* returns 0 on success or < 0 if the reset hasn't succeeded
	*/
	void mei_cancel_work(struct mei_device *dev)
	{
	cancel_work_sync(&dev->init_work);
	cancel_work_sync(&dev->reset_work);

	cancel_delayed_work(&dev->timer_work);
	}
	EXPORT_SYMBOL_GPL(mei_cancel_work);

	/**
	* mei_reset - resets host and fw.
	*
	* @dev: the device structure
	*/
	int mei_reset(struct mei_device *dev)
	{
	enum mei_dev_state state = dev->dev_state;
	bool interrupts_enabled;
	int ret;

	if (state != MEI_DEV_INITIALIZING &&
	state != MEI_DEV_DISABLED &&
	state != MEI_DEV_POWER_DOWN &&
	state != MEI_DEV_POWER_UP) {
	struct mei_fw_status fw_status;
	mei_fw_status(dev, &fw_status);
	dev_warn(&dev->pdev->dev,
	"unexpected reset: dev_state = %s " FW_STS_FMT "\n",
	mei_dev_state_str(state), FW_STS_PRM(fw_status));
	}

	/* we're already in reset, cancel the init timer
	* if the reset was called due the hbm protocol error
	* we need to call it before hw start
	* so the hbm watchdog won't kick in
	*/
	mei_hbm_idle(dev);

	/* enter reset flow */
	interrupts_enabled = state != MEI_DEV_POWER_DOWN;
	dev->dev_state = MEI_DEV_RESETTING;

	dev->reset_count++;
	if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
	dev_err(&dev->pdev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
	dev->dev_state = MEI_DEV_DISABLED;
	return -ENODEV;
	}

	ret = mei_hw_reset(dev, interrupts_enabled);
	/* fall through and remove the sw state even if hw reset has failed */

	/* no need to clean up software state in case of power up */
	if (state != MEI_DEV_INITIALIZING &&
	state != MEI_DEV_POWER_UP) {

	/* remove all waiting requests */
	mei_cl_all_write_clear(dev);

	mei_cl_all_disconnect(dev);

	/* wake up all readers and writers so they can be interrupted */
	mei_cl_all_wakeup(dev);

	/* remove entry if already in list */
	dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
	mei_cl_unlink(&dev->wd_cl);
	mei_cl_unlink(&dev->iamthif_cl);
	mei_amthif_reset_params(dev);
	}

	mei_hbm_reset(dev);

	dev->rd_msg_hdr = 0;
	dev->wd_pending = false;

	if (ret) {
	dev_err(&dev->pdev->dev, "hw_reset failed ret = %d\n", ret);
	return ret;
	}

	if (state == MEI_DEV_POWER_DOWN) {
	dev_dbg(&dev->pdev->dev, "powering down: end of reset\n");
	dev->dev_state = MEI_DEV_DISABLED;
	return 0;
	}

	ret = mei_hw_start(dev);
	if (ret) {
	dev_err(&dev->pdev->dev, "hw_start failed ret = %d\n", ret);
	return ret;
	}

	dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n");

	dev->dev_state = MEI_DEV_INIT_CLIENTS;
	ret = mei_hbm_start_req(dev);
	if (ret) {
	dev_err(&dev->pdev->dev, "hbm_start failed ret = %d\n", ret);
	dev->dev_state = MEI_DEV_RESETTING;
	return ret;
	}

	return 0;
	}
	EXPORT_SYMBOL_GPL(mei_reset);

	/**
	* mei_start - initializes host and fw to start work.
	*
	* @dev: the device structure
	*
	* returns 0 on success, <0 on failure.
	*/
	int mei_start(struct mei_device *dev)
	{
	int ret;
	mutex_lock(&dev->device_lock);

	/* acknowledge interrupt and stop interrupts */
	mei_clear_interrupts(dev);

	mei_hw_config(dev);

	dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");

	dev->reset_count = 0;
	do {
	dev->dev_state = MEI_DEV_INITIALIZING;
	ret = mei_reset(dev);

	if (ret == -ENODEV \|\| dev->dev_state == MEI_DEV_DISABLED) {
	dev_err(&dev->pdev->dev, "reset failed ret = %d", ret);
	goto err;
	}
	} while (ret);

	/* we cannot start the device w/o hbm start message completed */
	if (dev->dev_state == MEI_DEV_DISABLED) {
	dev_err(&dev->pdev->dev, "reset failed");
	goto err;
	}

	if (mei_hbm_start_wait(dev)) {
	dev_err(&dev->pdev->dev, "HBM haven't started");
	goto err;
	}

	if (!mei_host_is_ready(dev)) {
	dev_err(&dev->pdev->dev, "host is not ready.\n");
	goto err;
	}

	if (!mei_hw_is_ready(dev)) {
	dev_err(&dev->pdev->dev, "ME is not ready.\n");
	goto err;
	}

	if (!mei_hbm_version_is_supported(dev)) {
	dev_dbg(&dev->pdev->dev, "MEI start failed.\n");
	goto err;
	}

	dev_dbg(&dev->pdev->dev, "link layer has been established.\n");

	mutex_unlock(&dev->device_lock);
	return 0;
	err:
	dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
	dev->dev_state = MEI_DEV_DISABLED;
	mutex_unlock(&dev->device_lock);
	return -ENODEV;
	}
	EXPORT_SYMBOL_GPL(mei_start);

	/**
	* mei_restart - restart device after suspend
	*
	* @dev: the device structure
	*
	* returns 0 on success or -ENODEV if the restart hasn't succeeded
	*/
	int mei_restart(struct mei_device *dev)
	{
	int err;

	mutex_lock(&dev->device_lock);

	mei_clear_interrupts(dev);

	dev->dev_state = MEI_DEV_POWER_UP;
	dev->reset_count = 0;

	err = mei_reset(dev);

	mutex_unlock(&dev->device_lock);

	if (err == -ENODEV \|\| dev->dev_state == MEI_DEV_DISABLED) {
	dev_err(&dev->pdev->dev, "device disabled = %d\n", err);
	return -ENODEV;
	}

	/* try to start again */
	if (err)
	schedule_work(&dev->reset_work);


	return 0;
	}
	EXPORT_SYMBOL_GPL(mei_restart);

	static void mei_reset_work(struct work_struct *work)
	{
	struct mei_device *dev =
	container_of(work, struct mei_device, reset_work);
	int ret;

	mutex_lock(&dev->device_lock);

	ret = mei_reset(dev);

	mutex_unlock(&dev->device_lock);

	if (dev->dev_state == MEI_DEV_DISABLED) {
	dev_err(&dev->pdev->dev, "device disabled = %d\n", ret);
	return;
	}

	/* retry reset in case of failure */
	if (ret)
	schedule_work(&dev->reset_work);
	}

	void mei_stop(struct mei_device *dev)
	{
	dev_dbg(&dev->pdev->dev, "stopping the device.\n");

	mei_cancel_work(dev);

	mei_nfc_host_exit(dev);

	mei_cl_bus_remove_devices(dev);

	mutex_lock(&dev->device_lock);

	mei_wd_stop(dev);

	dev->dev_state = MEI_DEV_POWER_DOWN;
	mei_reset(dev);

	mutex_unlock(&dev->device_lock);

	mei_watchdog_unregister(dev);
	}
	EXPORT_SYMBOL_GPL(mei_stop);

	/**
	* mei_write_is_idle - check if the write queues are idle
	*
	* @dev: the device structure
	*
	* returns true of there is no pending write
	*/
	bool mei_write_is_idle(struct mei_device *dev)
	{
	bool idle = (dev->dev_state == MEI_DEV_ENABLED &&
	list_empty(&dev->ctrl_wr_list.list) &&
	list_empty(&dev->write_list.list));

	dev_dbg(&dev->pdev->dev, "write pg: is idle[%d] state=%s ctrl=%d write=%d\n",
	idle,
	mei_dev_state_str(dev->dev_state),
	list_empty(&dev->ctrl_wr_list.list),
	list_empty(&dev->write_list.list));

	return idle;
	}
	EXPORT_SYMBOL_GPL(mei_write_is_idle);

	int mei_fw_status(struct mei_device dev, struct mei_fw_status fw_status)
	{
	int i;
	const struct mei_fw_status *fw_src = &dev->cfg->fw_status;

	if (!fw_status)
	return -EINVAL;

	fw_status->count = fw_src->count;
	for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
	int ret;
	ret = pci_read_config_dword(dev->pdev,
	fw_src->status[i], &fw_status->status[i]);
	if (ret)
	return ret;
	}

	return 0;
	}
	EXPORT_SYMBOL_GPL(mei_fw_status);

	void mei_device_init(struct mei_device dev, const struct mei_cfg cfg)
	{
	/* setup our list array */
	INIT_LIST_HEAD(&dev->file_list);
	INIT_LIST_HEAD(&dev->device_list);
	mutex_init(&dev->device_lock);
	init_waitqueue_head(&dev->wait_hw_ready);
	init_waitqueue_head(&dev->wait_pg);
	init_waitqueue_head(&dev->wait_recvd_msg);
	init_waitqueue_head(&dev->wait_stop_wd);
	dev->dev_state = MEI_DEV_INITIALIZING;
	dev->reset_count = 0;

	mei_io_list_init(&dev->read_list);
	mei_io_list_init(&dev->write_list);
	mei_io_list_init(&dev->write_waiting_list);
	mei_io_list_init(&dev->ctrl_wr_list);
	mei_io_list_init(&dev->ctrl_rd_list);

	INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
	INIT_WORK(&dev->init_work, mei_host_client_init);
	INIT_WORK(&dev->reset_work, mei_reset_work);

	INIT_LIST_HEAD(&dev->wd_cl.link);
	INIT_LIST_HEAD(&dev->iamthif_cl.link);
	mei_io_list_init(&dev->amthif_cmd_list);
	mei_io_list_init(&dev->amthif_rd_complete_list);

	bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
	dev->open_handle_count = 0;

	/*
	* Reserving the first client ID
	* 0: Reserved for MEI Bus Message communications
	*/
	bitmap_set(dev->host_clients_map, 0, 1);

	dev->pg_event = MEI_PG_EVENT_IDLE;
	dev->cfg = cfg;
	}
	EXPORT_SYMBOL_GPL(mei_device_init);