| /* |
| * Allwinner A1X SoCs pinctrl driver. |
| * |
| * Copyright (C) 2012 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #ifndef __PINCTRL_SUNXI_H |
| #define __PINCTRL_SUNXI_H |
| |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| |
| #define PA_BASE 0 |
| #define PB_BASE 32 |
| #define PC_BASE 64 |
| #define PD_BASE 96 |
| #define PE_BASE 128 |
| #define PF_BASE 160 |
| #define PG_BASE 192 |
| #define PH_BASE 224 |
| #define PI_BASE 256 |
| #define PL_BASE 352 |
| #define PM_BASE 384 |
| |
| #define SUNXI_PINCTRL_PIN(bank, pin) \ |
| PINCTRL_PIN(P ## bank ## _BASE + (pin), "P" #bank #pin) |
| |
| #define SUNXI_PIN_NAME_MAX_LEN 5 |
| |
| #define BANK_MEM_SIZE 0x24 |
| #define MUX_REGS_OFFSET 0x0 |
| #define DATA_REGS_OFFSET 0x10 |
| #define DLEVEL_REGS_OFFSET 0x14 |
| #define PULL_REGS_OFFSET 0x1c |
| |
| #define PINS_PER_BANK 32 |
| #define MUX_PINS_PER_REG 8 |
| #define MUX_PINS_BITS 4 |
| #define MUX_PINS_MASK 0x0f |
| #define DATA_PINS_PER_REG 32 |
| #define DATA_PINS_BITS 1 |
| #define DATA_PINS_MASK 0x01 |
| #define DLEVEL_PINS_PER_REG 16 |
| #define DLEVEL_PINS_BITS 2 |
| #define DLEVEL_PINS_MASK 0x03 |
| #define PULL_PINS_PER_REG 16 |
| #define PULL_PINS_BITS 2 |
| #define PULL_PINS_MASK 0x03 |
| |
| #define SUNXI_IRQ_NUMBER 32 |
| |
| #define IRQ_CFG_REG 0x200 |
| #define IRQ_CFG_IRQ_PER_REG 8 |
| #define IRQ_CFG_IRQ_BITS 4 |
| #define IRQ_CFG_IRQ_MASK ((1 << IRQ_CFG_IRQ_BITS) - 1) |
| #define IRQ_CTRL_REG 0x210 |
| #define IRQ_CTRL_IRQ_PER_REG 32 |
| #define IRQ_CTRL_IRQ_BITS 1 |
| #define IRQ_CTRL_IRQ_MASK ((1 << IRQ_CTRL_IRQ_BITS) - 1) |
| #define IRQ_STATUS_REG 0x214 |
| #define IRQ_STATUS_IRQ_PER_REG 32 |
| #define IRQ_STATUS_IRQ_BITS 1 |
| #define IRQ_STATUS_IRQ_MASK ((1 << IRQ_STATUS_IRQ_BITS) - 1) |
| |
| #define IRQ_EDGE_RISING 0x00 |
| #define IRQ_EDGE_FALLING 0x01 |
| #define IRQ_LEVEL_HIGH 0x02 |
| #define IRQ_LEVEL_LOW 0x03 |
| #define IRQ_EDGE_BOTH 0x04 |
| |
| struct sunxi_desc_function { |
| const char *name; |
| u8 muxval; |
| u8 irqnum; |
| }; |
| |
| struct sunxi_desc_pin { |
| struct pinctrl_pin_desc pin; |
| struct sunxi_desc_function *functions; |
| }; |
| |
| struct sunxi_pinctrl_desc { |
| const struct sunxi_desc_pin *pins; |
| int npins; |
| unsigned pin_base; |
| }; |
| |
| struct sunxi_pinctrl_function { |
| const char *name; |
| const char **groups; |
| unsigned ngroups; |
| }; |
| |
| struct sunxi_pinctrl_group { |
| const char *name; |
| unsigned long config; |
| unsigned pin; |
| }; |
| |
| struct sunxi_pinctrl { |
| void __iomem *membase; |
| struct gpio_chip *chip; |
| const struct sunxi_pinctrl_desc *desc; |
| struct device *dev; |
| struct irq_domain *domain; |
| struct sunxi_pinctrl_function *functions; |
| unsigned nfunctions; |
| struct sunxi_pinctrl_group *groups; |
| unsigned ngroups; |
| int irq; |
| int irq_array[SUNXI_IRQ_NUMBER]; |
| spinlock_t lock; |
| struct pinctrl_dev *pctl_dev; |
| }; |
| |
| #define SUNXI_PIN(_pin, ...) \ |
| { \ |
| .pin = _pin, \ |
| .functions = (struct sunxi_desc_function[]){ \ |
| __VA_ARGS__, { } }, \ |
| } |
| |
| #define SUNXI_FUNCTION(_val, _name) \ |
| { \ |
| .name = _name, \ |
| .muxval = _val, \ |
| } |
| |
| #define SUNXI_FUNCTION_IRQ(_val, _irq) \ |
| { \ |
| .name = "irq", \ |
| .muxval = _val, \ |
| .irqnum = _irq, \ |
| } |
| |
| /* |
| * The sunXi PIO registers are organized as is: |
| * 0x00 - 0x0c Muxing values. |
| * 8 pins per register, each pin having a 4bits value |
| * 0x10 Pin values |
| * 32 bits per register, each pin corresponding to one bit |
| * 0x14 - 0x18 Drive level |
| * 16 pins per register, each pin having a 2bits value |
| * 0x1c - 0x20 Pull-Up values |
| * 16 pins per register, each pin having a 2bits value |
| * |
| * This is for the first bank. Each bank will have the same layout, |
| * with an offset being a multiple of 0x24. |
| * |
| * The following functions calculate from the pin number the register |
| * and the bit offset that we should access. |
| */ |
| static inline u32 sunxi_mux_reg(u16 pin) |
| { |
| u8 bank = pin / PINS_PER_BANK; |
| u32 offset = bank * BANK_MEM_SIZE; |
| offset += MUX_REGS_OFFSET; |
| offset += pin % PINS_PER_BANK / MUX_PINS_PER_REG * 0x04; |
| return round_down(offset, 4); |
| } |
| |
| static inline u32 sunxi_mux_offset(u16 pin) |
| { |
| u32 pin_num = pin % MUX_PINS_PER_REG; |
| return pin_num * MUX_PINS_BITS; |
| } |
| |
| static inline u32 sunxi_data_reg(u16 pin) |
| { |
| u8 bank = pin / PINS_PER_BANK; |
| u32 offset = bank * BANK_MEM_SIZE; |
| offset += DATA_REGS_OFFSET; |
| offset += pin % PINS_PER_BANK / DATA_PINS_PER_REG * 0x04; |
| return round_down(offset, 4); |
| } |
| |
| static inline u32 sunxi_data_offset(u16 pin) |
| { |
| u32 pin_num = pin % DATA_PINS_PER_REG; |
| return pin_num * DATA_PINS_BITS; |
| } |
| |
| static inline u32 sunxi_dlevel_reg(u16 pin) |
| { |
| u8 bank = pin / PINS_PER_BANK; |
| u32 offset = bank * BANK_MEM_SIZE; |
| offset += DLEVEL_REGS_OFFSET; |
| offset += pin % PINS_PER_BANK / DLEVEL_PINS_PER_REG * 0x04; |
| return round_down(offset, 4); |
| } |
| |
| static inline u32 sunxi_dlevel_offset(u16 pin) |
| { |
| u32 pin_num = pin % DLEVEL_PINS_PER_REG; |
| return pin_num * DLEVEL_PINS_BITS; |
| } |
| |
| static inline u32 sunxi_pull_reg(u16 pin) |
| { |
| u8 bank = pin / PINS_PER_BANK; |
| u32 offset = bank * BANK_MEM_SIZE; |
| offset += PULL_REGS_OFFSET; |
| offset += pin % PINS_PER_BANK / PULL_PINS_PER_REG * 0x04; |
| return round_down(offset, 4); |
| } |
| |
| static inline u32 sunxi_pull_offset(u16 pin) |
| { |
| u32 pin_num = pin % PULL_PINS_PER_REG; |
| return pin_num * PULL_PINS_BITS; |
| } |
| |
| static inline u32 sunxi_irq_cfg_reg(u16 irq) |
| { |
| u8 reg = irq / IRQ_CFG_IRQ_PER_REG * 0x04; |
| return reg + IRQ_CFG_REG; |
| } |
| |
| static inline u32 sunxi_irq_cfg_offset(u16 irq) |
| { |
| u32 irq_num = irq % IRQ_CFG_IRQ_PER_REG; |
| return irq_num * IRQ_CFG_IRQ_BITS; |
| } |
| |
| static inline u32 sunxi_irq_ctrl_reg(u16 irq) |
| { |
| u8 reg = irq / IRQ_CTRL_IRQ_PER_REG * 0x04; |
| return reg + IRQ_CTRL_REG; |
| } |
| |
| static inline u32 sunxi_irq_ctrl_offset(u16 irq) |
| { |
| u32 irq_num = irq % IRQ_CTRL_IRQ_PER_REG; |
| return irq_num * IRQ_CTRL_IRQ_BITS; |
| } |
| |
| static inline u32 sunxi_irq_status_reg(u16 irq) |
| { |
| u8 reg = irq / IRQ_STATUS_IRQ_PER_REG * 0x04; |
| return reg + IRQ_STATUS_REG; |
| } |
| |
| static inline u32 sunxi_irq_status_offset(u16 irq) |
| { |
| u32 irq_num = irq % IRQ_STATUS_IRQ_PER_REG; |
| return irq_num * IRQ_STATUS_IRQ_BITS; |
| } |
| |
| int sunxi_pinctrl_init(struct platform_device *pdev, |
| const struct sunxi_pinctrl_desc *desc); |
| |
| #endif /* __PINCTRL_SUNXI_H */ |