blob: e96a37cf06ac117f45246e4f60e6745384a0a119 [file] [log] [blame] [edit]
/*
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
*
* Sun3 DMA additions by Sam Creasey (sammy@sammy.net)
*
* Adapted from mac_scsinew.h:
*/
/*
* Cumana Generic NCR5380 driver defines
*
* Copyright 1993, Drew Eckhardt
* Visionary Computing
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
*
* ALPHA RELEASE 1.
*
* For more information, please consult
*
* NCR 5380 Family
* SCSI Protocol Controller
* Databook
*
* NCR Microelectronics
* 1635 Aeroplaza Drive
* Colorado Springs, CO 80916
* 1+ (719) 578-3400
* 1+ (800) 334-5454
*/
#ifndef SUN3_SCSI_H
#define SUN3_SCSI_H
#define SUN3SCSI_PUBLIC_RELEASE 1
/*
* Int: level 2 autovector
* IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
*/
#define IRQ_SUN3_SCSI 2
#define IOBASE_SUN3_SCSI 0x00140000
#define IOBASE_SUN3_VMESCSI 0xff200000
static int sun3scsi_abort(struct scsi_cmnd *);
static int sun3scsi_detect (struct scsi_host_template *);
static const char *sun3scsi_info (struct Scsi_Host *);
static int sun3scsi_bus_reset(struct scsi_cmnd *);
static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int sun3scsi_release (struct Scsi_Host *);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#ifndef CAN_QUEUE
#define CAN_QUEUE 16
#endif
#ifndef SG_TABLESIZE
#define SG_TABLESIZE SG_NONE
#endif
#ifndef MAX_TAGS
#define MAX_TAGS 32
#endif
#ifndef USE_TAGGED_QUEUING
#define USE_TAGGED_QUEUING 1
#endif
#include <scsi/scsicam.h>
#ifdef SUN3_SCSI_VME
#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
#else
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
#endif
#define NCR5380_implementation_fields \
int port, ctrl
#define NCR5380_local_declare() \
struct Scsi_Host *_instance
#define NCR5380_setup(instance) \
_instance = instance
#define NCR5380_read(reg) sun3scsi_read(reg)
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
#define NCR5380_intr sun3scsi_intr
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_dma_xfer_len(i, cmd, phase) \
sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
#define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
#define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
#define NCR5380_dma_residual sun3scsi_dma_residual
/* additional registers - mainly DMA control regs */
/* these start at regbase + 8 -- directly after the NCR regs */
struct sun3_dma_regs {
unsigned short dma_addr_hi; /* vme only */
unsigned short dma_addr_lo; /* vme only */
unsigned short dma_count_hi; /* vme only */
unsigned short dma_count_lo; /* vme only */
unsigned short udc_data; /* udc dma data reg (obio only) */
unsigned short udc_addr; /* uda dma addr reg (obio only) */
unsigned short fifo_data; /* fifo data reg, holds extra byte on
odd dma reads */
unsigned short fifo_count;
unsigned short csr; /* control/status reg */
unsigned short bpack_hi; /* vme only */
unsigned short bpack_lo; /* vme only */
unsigned short ivect; /* vme only */
unsigned short fifo_count_hi; /* vme only */
};
/* ucd chip specific regs - live in dvma space */
struct sun3_udc_regs {
unsigned short rsel; /* select regs to load */
unsigned short addr_hi; /* high word of addr */
unsigned short addr_lo; /* low word */
unsigned short count; /* words to be xfer'd */
unsigned short mode_hi; /* high word of channel mode */
unsigned short mode_lo; /* low word of channel mode */
};
/* addresses of the udc registers */
#define UDC_MODE 0x38
#define UDC_CSR 0x2e /* command/status */
#define UDC_CHN_HI 0x26 /* chain high word */
#define UDC_CHN_LO 0x22 /* chain lo word */
#define UDC_CURA_HI 0x1a /* cur reg A high */
#define UDC_CURA_LO 0x0a /* cur reg A low */
#define UDC_CURB_HI 0x12 /* cur reg B high */
#define UDC_CURB_LO 0x02 /* cur reg B low */
#define UDC_MODE_HI 0x56 /* mode reg high */
#define UDC_MODE_LO 0x52 /* mode reg low */
#define UDC_COUNT 0x32 /* words to xfer */
/* some udc commands */
#define UDC_RESET 0
#define UDC_CHN_START 0xa0 /* start chain */
#define UDC_INT_ENABLE 0x32 /* channel 1 int on */
/* udc mode words */
#define UDC_MODE_HIWORD 0x40
#define UDC_MODE_LSEND 0xc2
#define UDC_MODE_LRECV 0xd2
/* udc reg selections */
#define UDC_RSEL_SEND 0x282
#define UDC_RSEL_RECV 0x182
/* bits in csr reg */
#define CSR_DMA_ACTIVE 0x8000
#define CSR_DMA_CONFLICT 0x4000
#define CSR_DMA_BUSERR 0x2000
#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
#define CSR_SDB_INT 0x200 /* sbc interrupt pending */
#define CSR_DMA_INT 0x100 /* dma interrupt pending */
#define CSR_LEFT 0xc0
#define CSR_LEFT_3 0xc0
#define CSR_LEFT_2 0x80
#define CSR_LEFT_1 0x40
#define CSR_PACK_ENABLE 0x20
#define CSR_DMA_ENABLE 0x10
#define CSR_SEND 0x8 /* 1 = send 0 = recv */
#define CSR_FIFO 0x2 /* reset fifo */
#define CSR_INTR 0x4 /* interrupt enable */
#define CSR_SCSI 0x1
#define VME_DATA24 0x3d00
#endif /* SUN3_SCSI_H */