arch/s390/kernel/head.S - arm/linux - Git at Google

 /*
  * Copyright IBM Corp. 1999, 2010
  *
  *    Author(s): Hartmut Penner <hp@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
  *		 Rob van der Heij <rvdhei@iae.nl>
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  * There are 5 different IPL methods
  *  1) load the image directly into ram at address 0 and do an PSW restart
  *  2) linload will load the image from address 0x10000 to memory 0x10000
  *     and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
  *  3) generate the tape ipl header, store the generated image on a tape
  *     and ipl from it
  *     In case of SL tape you need to IPL 5 times to get past VOL1 etc
  *  4) generate the vm reader ipl header, move the generated image to the
  *     VM reader (use option NOH!) and do a ipl from reader (VM only)
  *  5) direct call of start by the SALIPL loader
  *  We use the cpuid to distinguish between VM and native ipl
  *  params for kernel are pushed to 0x10400 (see setup.h)
  *
  */

 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/facility.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>

 #define ARCH_OFFSET	4

 __HEAD

 #define IPL_BS	0x730
 	.org	0
 	.long	0x00080000,0x80000000+iplstart	# The first 24 bytes are loaded
 	.long	0x02000018,0x60000050		# by ipl to addresses 0-23.
 	.long	0x02000068,0x60000050		# (a PSW and two CCWs).
 	.fill	80-24,1,0x40			# bytes 24-79 are discarded !!
 	.long	0x020000f0,0x60000050		# The next 160 byte are loaded
 	.long	0x02000140,0x60000050		# to addresses 0x18-0xb7
 	.long	0x02000190,0x60000050		# They form the continuation
 	.long	0x020001e0,0x60000050		# of the CCW program started
 	.long	0x02000230,0x60000050		# by ipl and load the range
 	.long	0x02000280,0x60000050		# 0x0f0-0x730 from the image
 	.long	0x020002d0,0x60000050		# to the range 0x0f0-0x730
 	.long	0x02000320,0x60000050		# in memory. At the end of
 	.long	0x02000370,0x60000050		# the channel program the PSW
 	.long	0x020003c0,0x60000050		# at location 0 is loaded.
 	.long	0x02000410,0x60000050		# Initial processing starts
 	.long	0x02000460,0x60000050		# at 0x200 = iplstart.
 	.long	0x020004b0,0x60000050
 	.long	0x02000500,0x60000050
 	.long	0x02000550,0x60000050
 	.long	0x020005a0,0x60000050
 	.long	0x020005f0,0x60000050
 	.long	0x02000640,0x60000050
 	.long	0x02000690,0x60000050
 	.long	0x020006e0,0x20000050

 	.org	0x200

 #
 # subroutine to wait for end I/O
 #
 .Lirqwait:
 	mvc	0x1f0(16),.Lnewpsw	# set up IO interrupt psw
 	lpsw	.Lwaitpsw
 .Lioint:
 	br	%r14
 	.align	8
 .Lnewpsw:
 	.quad	0x0000000080000000,.Lioint
 .Lwaitpsw:
 	.long	0x020a0000,0x80000000+.Lioint

 #
 # subroutine for loading cards from the reader
 #
 .Lloader:
 	la	%r4,0(%r14)
 	la	%r3,.Lorb		# r2 = address of orb into r2
 	la	%r5,.Lirb		# r4 = address of irb
 	la	%r6,.Lccws
 	la	%r7,20
 .Linit:
 	st	%r2,4(%r6)		# initialize CCW data addresses
 	la	%r2,0x50(%r2)
 	la	%r6,8(%r6)
 	bct	7,.Linit

 	lctl	%c6,%c6,.Lcr6		# set IO subclass mask
 	slr	%r2,%r2
 .Lldlp:
 	ssch	0(%r3)			# load chunk of 1600 bytes
 	bnz	.Llderr
 .Lwait4irq:
 	bas	%r14,.Lirqwait
 	c	%r1,0xb8		# compare subchannel number
 	bne	.Lwait4irq
 	tsch	0(%r5)

 	slr	%r0,%r0
 	ic	%r0,8(%r5)		# get device status
 	chi	%r0,8			# channel end ?
 	be	.Lcont
 	chi	%r0,12			# channel end + device end ?
 	be	.Lcont

 	l	%r0,4(%r5)
 	s	%r0,8(%r3)		# r0/8 = number of ccws executed
 	mhi	%r0,10			# *10 = number of bytes in ccws
 	lh	%r3,10(%r5)		# get residual count
 	sr	%r0,%r3 		# #ccws*80-residual=#bytes read
 	ar	%r2,%r0

 	br	%r4			# r2 contains the total size

 .Lcont:
 	ahi	%r2,0x640		# add 0x640 to total size
 	la	%r6,.Lccws
 	la	%r7,20
 .Lincr:
 	l	%r0,4(%r6)		# update CCW data addresses
 	ahi	%r0,0x640
 	st	%r0,4(%r6)
 	ahi	%r6,8
 	bct	7,.Lincr

 	b	.Lldlp
 .Llderr:
 	lpsw	.Lcrash

 	.align	8
 .Lorb:	.long	0x00000000,0x0080ff00,.Lccws
 .Lirb:	.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
 .Lcr6:	.long	0xff000000
 .Lloadp:.long	0,0
 	.align	8
 .Lcrash:.long	0x000a0000,0x00000000

 	.align	8
 .Lccws: .rept	19
 	.long	0x02600050,0x00000000
 	.endr
 	.long	0x02200050,0x00000000

 iplstart:
 	mvi	__LC_AR_MODE_ID,1	# set esame flag
 	slr	%r0,%r0			# set cpuid to zero
 	lhi	%r1,2			# mode 2 = esame (dump)
 	sigp	%r1,%r0,0x12		# switch to esame mode
 	bras	%r13,0f
 	.fill	16,4,0x0
 0:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
 	sam31				# switch to 31 bit addressing mode
 	lh	%r1,0xb8		# test if subchannel number
 	bct	%r1,.Lnoload		#  is valid
 	l	%r1,0xb8		# load ipl subchannel number
 	la	%r2,IPL_BS		# load start address
 	bas	%r14,.Lloader		# load rest of ipl image
 	l	%r12,.Lparm		# pointer to parameter area
 	st	%r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number

 #
 # load parameter file from ipl device
 #
 .Lagain1:
 	l	%r2,.Linitrd		# ramdisk loc. is temp
 	bas	%r14,.Lloader		# load parameter file
 	ltr	%r2,%r2 		# got anything ?
 	bz	.Lnopf
 	chi	%r2,895
 	bnh	.Lnotrunc
 	la	%r2,895
 .Lnotrunc:
 	l	%r4,.Linitrd
 	clc	0(3,%r4),.L_hdr		# if it is HDRx
 	bz	.Lagain1		# skip dataset header
 	clc	0(3,%r4),.L_eof		# if it is EOFx
 	bz	.Lagain1		# skip dateset trailer
 	la	%r5,0(%r4,%r2)
 	lr	%r3,%r2
 	la	%r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
 	mvc	0(256,%r3),0(%r4)
 	mvc	256(256,%r3),256(%r4)
 	mvc	512(256,%r3),512(%r4)
 	mvc	768(122,%r3),768(%r4)
 	slr	%r0,%r0
 	b	.Lcntlp
 .Ldelspc:
 	ic	%r0,0(%r2,%r3)
 	chi	%r0,0x20		# is it a space ?
 	be	.Lcntlp
 	ahi	%r2,1
 	b	.Leolp
 .Lcntlp:
 	brct	%r2,.Ldelspc
 .Leolp:
 	slr	%r0,%r0
 	stc	%r0,0(%r2,%r3)		# terminate buffer
 .Lnopf:

 #
 # load ramdisk from ipl device
 #
 .Lagain2:
 	l	%r2,.Linitrd		# addr of ramdisk
 	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
 	bas	%r14,.Lloader		# load ramdisk
 	st	%r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
 	ltr	%r2,%r2
 	bnz	.Lrdcont
 	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
 .Lrdcont:
 	l	%r2,.Linitrd

 	clc	0(3,%r2),.L_hdr		# skip HDRx and EOFx
 	bz	.Lagain2
 	clc	0(3,%r2),.L_eof
 	bz	.Lagain2

 #
 # reset files in VM reader
 #
 	stidp	.Lcpuid			# store cpuid
 	tm	.Lcpuid,0xff		# running VM ?
 	bno	.Lnoreset
 	la	%r2,.Lreset
 	lhi	%r3,26
 	diag	%r2,%r3,8
 	la	%r5,.Lirb
 	stsch	0(%r5)			# check if irq is pending
 	tm	30(%r5),0x0f		# by verifying if any of the
 	bnz	.Lwaitforirq		# activity or status control
 	tm	31(%r5),0xff		# bits is set in the schib
 	bz	.Lnoreset
 .Lwaitforirq:
 	bas	%r14,.Lirqwait		# wait for IO interrupt
 	c	%r1,0xb8		# compare subchannel number
 	bne	.Lwaitforirq
 	la	%r5,.Lirb
 	tsch	0(%r5)
 .Lnoreset:
 	b	.Lnoload

 #
 # everything loaded, go for it
 #
 .Lnoload:
 	l	%r1,.Lstartup
 	br	%r1

 .Linitrd:.long _end			# default address of initrd
 .Lparm:	.long  PARMAREA
 .Lstartup: .long startup
 .Lreset:.byte	0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
 	.byte	0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
 	.byte	0xc8,0xd6,0xd3,0xc4	# "change rdr all keep nohold"
 .L_eof: .long	0xc5d6c600	 /* C'EOF' */
 .L_hdr: .long	0xc8c4d900	 /* C'HDR' */
 	.align	8
 .Lcpuid:.fill	8,1,0

 #
 # startup-code at 0x10000, running in absolute addressing mode
 # this is called either by the ipl loader or directly by PSW restart
 # or linload or SALIPL
 #
 	.org	0x10000
 ENTRY(startup)
 	j	.Lep_startup_normal
 	.org	0x10008
 #
 # This is a list of s390 kernel entry points. At address 0x1000f the number of
 # valid entry points is stored.
 #
 # IMPORTANT: Do not change this table, it is s390 kernel ABI!
 #
 	.ascii	"S390EP"
 	.byte	0x00,0x01
 #
 # kdump startup-code at 0x10010, running in 64 bit absolute addressing mode
 #
 	.org	0x10010
 ENTRY(startup_kdump)
 	j	.Lep_startup_kdump
 .Lep_startup_normal:
 	mvi	__LC_AR_MODE_ID,1	# set esame flag
 	slr	%r0,%r0 		# set cpuid to zero
 	lhi	%r1,2			# mode 2 = esame (dump)
 	sigp	%r1,%r0,0x12		# switch to esame mode
 	bras	%r13,0f
 	.fill	16,4,0x0
 0:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
 	sam64				# switch to 64 bit addressing mode
 	basr	%r13,0			# get base
 .LPG0:
 	xc	0x200(256),0x200	# partially clear lowcore
 	xc	0x300(256),0x300
 	xc	0xe00(256),0xe00
 	xc	0xf00(256),0xf00
 	lctlg	%c0,%c15,0x200(%r0)	# initialize control registers
 	stck	__LC_LAST_UPDATE_CLOCK
 	spt	6f-.LPG0(%r13)
 	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
 	l	%r15,.Lstack-.LPG0(%r13)
 	ahi	%r15,-STACK_FRAME_OVERHEAD
 	brasl	%r14,verify_facilities
 	/* Continue with startup code in head64.S */
 	jg	startup_continue

 .Lstack:
 	.long	0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
 	.align	8
 6:	.long	0x7fffffff,0xffffffff

 #include "head_kdump.S"

 #
 # params at 10400 (setup.h)
 #
 	.org	PARMAREA
 	.long	0,0			# IPL_DEVICE
 	.long	0,0			# INITRD_START
 	.long	0,0			# INITRD_SIZE
 	.long	0,0			# OLDMEM_BASE
 	.long	0,0			# OLDMEM_SIZE

 	.org	COMMAND_LINE
 	.byte	"root=/dev/ram0 ro"
 	.byte	0

 	.org	0x11000
	/*
	* Copyright IBM Corp. 1999, 2010
	*
	* Author(s): Hartmut Penner <hp@de.ibm.com>
	* Martin Schwidefsky <schwidefsky@de.ibm.com>
	* Rob van der Heij <rvdhei@iae.nl>
	* Heiko Carstens <heiko.carstens@de.ibm.com>
	*
	* There are 5 different IPL methods
	* 1) load the image directly into ram at address 0 and do an PSW restart
	* 2) linload will load the image from address 0x10000 to memory 0x10000
	* and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
	* 3) generate the tape ipl header, store the generated image on a tape
	* and ipl from it
	* In case of SL tape you need to IPL 5 times to get past VOL1 etc
	* 4) generate the vm reader ipl header, move the generated image to the
	* VM reader (use option NOH!) and do a ipl from reader (VM only)
	* 5) direct call of start by the SALIPL loader
	* We use the cpuid to distinguish between VM and native ipl
	* params for kernel are pushed to 0x10400 (see setup.h)
	*
	*/

	#include <linux/init.h>
	#include <linux/linkage.h>
	#include <asm/asm-offsets.h>
	#include <asm/thread_info.h>
	#include <asm/facility.h>
	#include <asm/page.h>
	#include <asm/ptrace.h>

	#define ARCH_OFFSET 4

	__HEAD

	#define IPL_BS 0x730
	.org 0
	.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
	.long 0x02000018,0x60000050 # by ipl to addresses 0-23.
	.long 0x02000068,0x60000050 # (a PSW and two CCWs).
	.fill 80-24,1,0x40 # bytes 24-79 are discarded !!
	.long 0x020000f0,0x60000050 # The next 160 byte are loaded
	.long 0x02000140,0x60000050 # to addresses 0x18-0xb7
	.long 0x02000190,0x60000050 # They form the continuation
	.long 0x020001e0,0x60000050 # of the CCW program started
	.long 0x02000230,0x60000050 # by ipl and load the range
	.long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
	.long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
	.long 0x02000320,0x60000050 # in memory. At the end of
	.long 0x02000370,0x60000050 # the channel program the PSW
	.long 0x020003c0,0x60000050 # at location 0 is loaded.
	.long 0x02000410,0x60000050 # Initial processing starts
	.long 0x02000460,0x60000050 # at 0x200 = iplstart.
	.long 0x020004b0,0x60000050
	.long 0x02000500,0x60000050
	.long 0x02000550,0x60000050
	.long 0x020005a0,0x60000050
	.long 0x020005f0,0x60000050
	.long 0x02000640,0x60000050
	.long 0x02000690,0x60000050
	.long 0x020006e0,0x20000050

	.org 0x200

	#
	# subroutine to wait for end I/O
	#
	.Lirqwait:
	mvc 0x1f0(16),.Lnewpsw # set up IO interrupt psw
	lpsw .Lwaitpsw
	.Lioint:
	br %r14
	.align 8
	.Lnewpsw:
	.quad 0x0000000080000000,.Lioint
	.Lwaitpsw:
	.long 0x020a0000,0x80000000+.Lioint

	#
	# subroutine for loading cards from the reader
	#
	.Lloader:
	la %r4,0(%r14)
	la %r3,.Lorb # r2 = address of orb into r2
	la %r5,.Lirb # r4 = address of irb
	la %r6,.Lccws
	la %r7,20
	.Linit:
	st %r2,4(%r6) # initialize CCW data addresses
	la %r2,0x50(%r2)
	la %r6,8(%r6)
	bct 7,.Linit

	lctl %c6,%c6,.Lcr6 # set IO subclass mask
	slr %r2,%r2
	.Lldlp:
	ssch 0(%r3) # load chunk of 1600 bytes
	bnz .Llderr
	.Lwait4irq:
	bas %r14,.Lirqwait
	c %r1,0xb8 # compare subchannel number
	bne .Lwait4irq
	tsch 0(%r5)

	slr %r0,%r0
	ic %r0,8(%r5) # get device status
	chi %r0,8 # channel end ?
	be .Lcont
	chi %r0,12 # channel end + device end ?
	be .Lcont

	l %r0,4(%r5)
	s %r0,8(%r3) # r0/8 = number of ccws executed
	mhi %r0,10 # *10 = number of bytes in ccws
	lh %r3,10(%r5) # get residual count
	sr %r0,%r3 # #ccws*80-residual=#bytes read
	ar %r2,%r0

	br %r4 # r2 contains the total size

	.Lcont:
	ahi %r2,0x640 # add 0x640 to total size
	la %r6,.Lccws
	la %r7,20
	.Lincr:
	l %r0,4(%r6) # update CCW data addresses
	ahi %r0,0x640
	st %r0,4(%r6)
	ahi %r6,8
	bct 7,.Lincr

	b .Lldlp
	.Llderr:
	lpsw .Lcrash

	.align 8
	.Lorb: .long 0x00000000,0x0080ff00,.Lccws
	.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
	.Lcr6: .long 0xff000000
	.Lloadp:.long 0,0
	.align 8
	.Lcrash:.long 0x000a0000,0x00000000

	.align 8
	.Lccws: .rept 19
	.long 0x02600050,0x00000000
	.endr
	.long 0x02200050,0x00000000

	iplstart:
	mvi __LC_AR_MODE_ID,1 # set esame flag
	slr %r0,%r0 # set cpuid to zero
	lhi %r1,2 # mode 2 = esame (dump)
	sigp %r1,%r0,0x12 # switch to esame mode
	bras %r13,0f
	.fill 16,4,0x0
	0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
	sam31 # switch to 31 bit addressing mode
	lh %r1,0xb8 # test if subchannel number
	bct %r1,.Lnoload # is valid
	l %r1,0xb8 # load ipl subchannel number
	la %r2,IPL_BS # load start address
	bas %r14,.Lloader # load rest of ipl image
	l %r12,.Lparm # pointer to parameter area
	st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number

	#
	# load parameter file from ipl device
	#
	.Lagain1:
	l %r2,.Linitrd # ramdisk loc. is temp
	bas %r14,.Lloader # load parameter file
	ltr %r2,%r2 # got anything ?
	bz .Lnopf
	chi %r2,895
	bnh .Lnotrunc
	la %r2,895
	.Lnotrunc:
	l %r4,.Linitrd
	clc 0(3,%r4),.L_hdr # if it is HDRx
	bz .Lagain1 # skip dataset header
	clc 0(3,%r4),.L_eof # if it is EOFx
	bz .Lagain1 # skip dateset trailer
	la %r5,0(%r4,%r2)
	lr %r3,%r2
	la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
	mvc 0(256,%r3),0(%r4)
	mvc 256(256,%r3),256(%r4)
	mvc 512(256,%r3),512(%r4)
	mvc 768(122,%r3),768(%r4)
	slr %r0,%r0
	b .Lcntlp
	.Ldelspc:
	ic %r0,0(%r2,%r3)
	chi %r0,0x20 # is it a space ?
	be .Lcntlp
	ahi %r2,1
	b .Leolp
	.Lcntlp:
	brct %r2,.Ldelspc
	.Leolp:
	slr %r0,%r0
	stc %r0,0(%r2,%r3) # terminate buffer
	.Lnopf:

	#
	# load ramdisk from ipl device
	#
	.Lagain2:
	l %r2,.Linitrd # addr of ramdisk
	st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
	bas %r14,.Lloader # load ramdisk
	st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
	ltr %r2,%r2
	bnz .Lrdcont
	st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
	.Lrdcont:
	l %r2,.Linitrd

	clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
	bz .Lagain2
	clc 0(3,%r2),.L_eof
	bz .Lagain2

	#
	# reset files in VM reader
	#
	stidp .Lcpuid # store cpuid
	tm .Lcpuid,0xff # running VM ?
	bno .Lnoreset
	la %r2,.Lreset
	lhi %r3,26
	diag %r2,%r3,8
	la %r5,.Lirb
	stsch 0(%r5) # check if irq is pending
	tm 30(%r5),0x0f # by verifying if any of the
	bnz .Lwaitforirq # activity or status control
	tm 31(%r5),0xff # bits is set in the schib
	bz .Lnoreset
	.Lwaitforirq:
	bas %r14,.Lirqwait # wait for IO interrupt
	c %r1,0xb8 # compare subchannel number
	bne .Lwaitforirq
	la %r5,.Lirb
	tsch 0(%r5)
	.Lnoreset:
	b .Lnoload

	#
	# everything loaded, go for it
	#
	.Lnoload:
	l %r1,.Lstartup
	br %r1

	.Linitrd:.long _end # default address of initrd
	.Lparm: .long PARMAREA
	.Lstartup: .long startup
	.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
	.byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
	.byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
	.L_eof: .long 0xc5d6c600 /* C'EOF' */
	.L_hdr: .long 0xc8c4d900 /* C'HDR' */
	.align 8
	.Lcpuid:.fill 8,1,0

	#
	# startup-code at 0x10000, running in absolute addressing mode
	# this is called either by the ipl loader or directly by PSW restart
	# or linload or SALIPL
	#
	.org 0x10000
	ENTRY(startup)
	j .Lep_startup_normal
	.org 0x10008
	#
	# This is a list of s390 kernel entry points. At address 0x1000f the number of
	# valid entry points is stored.
	#
	# IMPORTANT: Do not change this table, it is s390 kernel ABI!
	#
	.ascii "S390EP"
	.byte 0x00,0x01
	#
	# kdump startup-code at 0x10010, running in 64 bit absolute addressing mode
	#
	.org 0x10010
	ENTRY(startup_kdump)
	j .Lep_startup_kdump
	.Lep_startup_normal:
	mvi __LC_AR_MODE_ID,1 # set esame flag
	slr %r0,%r0 # set cpuid to zero
	lhi %r1,2 # mode 2 = esame (dump)
	sigp %r1,%r0,0x12 # switch to esame mode
	bras %r13,0f
	.fill 16,4,0x0
	0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
	sam64 # switch to 64 bit addressing mode
	basr %r13,0 # get base
	.LPG0:
	xc 0x200(256),0x200 # partially clear lowcore
	xc 0x300(256),0x300
	xc 0xe00(256),0xe00
	xc 0xf00(256),0xf00
	lctlg %c0,%c15,0x200(%r0) # initialize control registers
	stck __LC_LAST_UPDATE_CLOCK
	spt 6f-.LPG0(%r13)
	mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
	l %r15,.Lstack-.LPG0(%r13)
	ahi %r15,-STACK_FRAME_OVERHEAD
	brasl %r14,verify_facilities
	/* Continue with startup code in head64.S */
	jg startup_continue

	.Lstack:
	.long 0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
	.align 8
	6: .long 0x7fffffff,0xffffffff

	#include "head_kdump.S"

	#
	# params at 10400 (setup.h)
	#
	.org PARMAREA
	.long 0,0 # IPL_DEVICE
	.long 0,0 # INITRD_START
	.long 0,0 # INITRD_SIZE
	.long 0,0 # OLDMEM_BASE
	.long 0,0 # OLDMEM_SIZE

	.org COMMAND_LINE
	.byte "root=/dev/ram0 ro"
	.byte 0

	.org 0x11000