| /* |
| * w83627hf/thf WDT driver |
| * |
| * (c) Copyright 2013 Guenter Roeck |
| * converted to watchdog infrastructure |
| * |
| * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com> |
| * added support for W83627THF. |
| * |
| * (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com> |
| * |
| * Based on advantechwdt.c which is based on wdt.c. |
| * Original copyright messages: |
| * |
| * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> |
| * |
| * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide |
| * warranty for any of this software. This material is provided |
| * "AS-IS" and at no charge. |
| * |
| * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/watchdog.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| |
| #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT" |
| #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ |
| |
| static int wdt_io; |
| static int cr_wdt_timeout; /* WDT timeout register */ |
| static int cr_wdt_control; /* WDT control register */ |
| static int cr_wdt_csr; /* WDT control & status register */ |
| |
| enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf, |
| w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, |
| w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 }; |
| |
| static int timeout; /* in seconds */ |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, |
| "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" |
| __MODULE_STRING(WATCHDOG_TIMEOUT) "."); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static int early_disable; |
| module_param(early_disable, int, 0); |
| MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)"); |
| |
| /* |
| * Kernel methods. |
| */ |
| |
| #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ |
| #define WDT_EFIR (wdt_io+0) /* Extended Function Index Register |
| (same as EFER) */ |
| #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ |
| |
| #define W83627HF_LD_WDT 0x08 |
| |
| #define W83627HF_ID 0x52 |
| #define W83627S_ID 0x59 |
| #define W83697HF_ID 0x60 |
| #define W83697UG_ID 0x68 |
| #define W83637HF_ID 0x70 |
| #define W83627THF_ID 0x82 |
| #define W83687THF_ID 0x85 |
| #define W83627EHF_ID 0x88 |
| #define W83627DHG_ID 0xa0 |
| #define W83627UHG_ID 0xa2 |
| #define W83667HG_ID 0xa5 |
| #define W83627DHG_P_ID 0xb0 |
| #define W83667HG_B_ID 0xb3 |
| #define NCT6775_ID 0xb4 |
| #define NCT6776_ID 0xc3 |
| #define NCT6102_ID 0xc4 |
| #define NCT6779_ID 0xc5 |
| #define NCT6791_ID 0xc8 |
| #define NCT6792_ID 0xc9 |
| |
| #define W83627HF_WDT_TIMEOUT 0xf6 |
| #define W83697HF_WDT_TIMEOUT 0xf4 |
| #define NCT6102D_WDT_TIMEOUT 0xf1 |
| |
| #define W83627HF_WDT_CONTROL 0xf5 |
| #define W83697HF_WDT_CONTROL 0xf3 |
| #define NCT6102D_WDT_CONTROL 0xf0 |
| |
| #define W836X7HF_WDT_CSR 0xf7 |
| #define NCT6102D_WDT_CSR 0xf2 |
| |
| static void superio_outb(int reg, int val) |
| { |
| outb(reg, WDT_EFER); |
| outb(val, WDT_EFDR); |
| } |
| |
| static inline int superio_inb(int reg) |
| { |
| outb(reg, WDT_EFER); |
| return inb(WDT_EFDR); |
| } |
| |
| static int superio_enter(void) |
| { |
| if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME)) |
| return -EBUSY; |
| |
| outb_p(0x87, WDT_EFER); /* Enter extended function mode */ |
| outb_p(0x87, WDT_EFER); /* Again according to manual */ |
| |
| return 0; |
| } |
| |
| static void superio_select(int ld) |
| { |
| superio_outb(0x07, ld); |
| } |
| |
| static void superio_exit(void) |
| { |
| outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ |
| release_region(wdt_io, 2); |
| } |
| |
| static int w83627hf_init(struct watchdog_device *wdog, enum chips chip) |
| { |
| int ret; |
| unsigned char t; |
| |
| ret = superio_enter(); |
| if (ret) |
| return ret; |
| |
| superio_select(W83627HF_LD_WDT); |
| |
| /* set CR30 bit 0 to activate GPIO2 */ |
| t = superio_inb(0x30); |
| if (!(t & 0x01)) |
| superio_outb(0x30, t | 0x01); |
| |
| switch (chip) { |
| case w83627hf: |
| case w83627s: |
| t = superio_inb(0x2B) & ~0x10; |
| superio_outb(0x2B, t); /* set GPIO24 to WDT0 */ |
| break; |
| case w83697hf: |
| /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ |
| t = superio_inb(0x29) & ~0x60; |
| t |= 0x20; |
| superio_outb(0x29, t); |
| break; |
| case w83697ug: |
| /* Set pin 118 to WDTO# mode */ |
| t = superio_inb(0x2b) & ~0x04; |
| superio_outb(0x2b, t); |
| break; |
| case w83627thf: |
| t = (superio_inb(0x2B) & ~0x08) | 0x04; |
| superio_outb(0x2B, t); /* set GPIO3 to WDT0 */ |
| break; |
| case w83627dhg: |
| case w83627dhg_p: |
| t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */ |
| superio_outb(0x2D, t); /* set GPIO5 to WDT0 */ |
| t = superio_inb(cr_wdt_control); |
| t |= 0x02; /* enable the WDTO# output low pulse |
| * to the KBRST# pin */ |
| superio_outb(cr_wdt_control, t); |
| break; |
| case w83637hf: |
| break; |
| case w83687thf: |
| t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */ |
| superio_outb(0x2C, t); |
| break; |
| case w83627ehf: |
| case w83627uhg: |
| case w83667hg: |
| case w83667hg_b: |
| case nct6775: |
| case nct6776: |
| case nct6779: |
| case nct6791: |
| case nct6792: |
| case nct6102: |
| /* |
| * These chips have a fixed WDTO# output pin (W83627UHG), |
| * or support more than one WDTO# output pin. |
| * Don't touch its configuration, and hope the BIOS |
| * does the right thing. |
| */ |
| t = superio_inb(cr_wdt_control); |
| t |= 0x02; /* enable the WDTO# output low pulse |
| * to the KBRST# pin */ |
| superio_outb(cr_wdt_control, t); |
| break; |
| default: |
| break; |
| } |
| |
| t = superio_inb(cr_wdt_timeout); |
| if (t != 0) { |
| if (early_disable) { |
| pr_warn("Stopping previously enabled watchdog until userland kicks in\n"); |
| superio_outb(cr_wdt_timeout, 0); |
| } else { |
| pr_info("Watchdog already running. Resetting timeout to %d sec\n", |
| wdog->timeout); |
| superio_outb(cr_wdt_timeout, wdog->timeout); |
| } |
| } |
| |
| /* set second mode & disable keyboard turning off watchdog */ |
| t = superio_inb(cr_wdt_control) & ~0x0C; |
| superio_outb(cr_wdt_control, t); |
| |
| /* reset trigger, disable keyboard & mouse turning off watchdog */ |
| t = superio_inb(cr_wdt_csr) & ~0xD0; |
| superio_outb(cr_wdt_csr, t); |
| |
| superio_exit(); |
| |
| return 0; |
| } |
| |
| static int wdt_set_time(unsigned int timeout) |
| { |
| int ret; |
| |
| ret = superio_enter(); |
| if (ret) |
| return ret; |
| |
| superio_select(W83627HF_LD_WDT); |
| superio_outb(cr_wdt_timeout, timeout); |
| superio_exit(); |
| |
| return 0; |
| } |
| |
| static int wdt_start(struct watchdog_device *wdog) |
| { |
| return wdt_set_time(wdog->timeout); |
| } |
| |
| static int wdt_stop(struct watchdog_device *wdog) |
| { |
| return wdt_set_time(0); |
| } |
| |
| static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout) |
| { |
| wdog->timeout = timeout; |
| |
| return 0; |
| } |
| |
| static unsigned int wdt_get_time(struct watchdog_device *wdog) |
| { |
| unsigned int timeleft; |
| int ret; |
| |
| ret = superio_enter(); |
| if (ret) |
| return 0; |
| |
| superio_select(W83627HF_LD_WDT); |
| timeleft = superio_inb(cr_wdt_timeout); |
| superio_exit(); |
| |
| return timeleft; |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static struct watchdog_info wdt_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .identity = "W83627HF Watchdog", |
| }; |
| |
| static const struct watchdog_ops wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = wdt_start, |
| .stop = wdt_stop, |
| .set_timeout = wdt_set_timeout, |
| .get_timeleft = wdt_get_time, |
| }; |
| |
| static struct watchdog_device wdt_dev = { |
| .info = &wdt_info, |
| .ops = &wdt_ops, |
| .timeout = WATCHDOG_TIMEOUT, |
| .min_timeout = 1, |
| .max_timeout = 255, |
| }; |
| |
| /* |
| * The WDT needs to learn about soft shutdowns in order to |
| * turn the timebomb registers off. |
| */ |
| |
| static int wdt_find(int addr) |
| { |
| u8 val; |
| int ret; |
| |
| cr_wdt_timeout = W83627HF_WDT_TIMEOUT; |
| cr_wdt_control = W83627HF_WDT_CONTROL; |
| cr_wdt_csr = W836X7HF_WDT_CSR; |
| |
| ret = superio_enter(); |
| if (ret) |
| return ret; |
| superio_select(W83627HF_LD_WDT); |
| val = superio_inb(0x20); |
| switch (val) { |
| case W83627HF_ID: |
| ret = w83627hf; |
| break; |
| case W83627S_ID: |
| ret = w83627s; |
| break; |
| case W83697HF_ID: |
| ret = w83697hf; |
| cr_wdt_timeout = W83697HF_WDT_TIMEOUT; |
| cr_wdt_control = W83697HF_WDT_CONTROL; |
| break; |
| case W83697UG_ID: |
| ret = w83697ug; |
| cr_wdt_timeout = W83697HF_WDT_TIMEOUT; |
| cr_wdt_control = W83697HF_WDT_CONTROL; |
| break; |
| case W83637HF_ID: |
| ret = w83637hf; |
| break; |
| case W83627THF_ID: |
| ret = w83627thf; |
| break; |
| case W83687THF_ID: |
| ret = w83687thf; |
| break; |
| case W83627EHF_ID: |
| ret = w83627ehf; |
| break; |
| case W83627DHG_ID: |
| ret = w83627dhg; |
| break; |
| case W83627DHG_P_ID: |
| ret = w83627dhg_p; |
| break; |
| case W83627UHG_ID: |
| ret = w83627uhg; |
| break; |
| case W83667HG_ID: |
| ret = w83667hg; |
| break; |
| case W83667HG_B_ID: |
| ret = w83667hg_b; |
| break; |
| case NCT6775_ID: |
| ret = nct6775; |
| break; |
| case NCT6776_ID: |
| ret = nct6776; |
| break; |
| case NCT6779_ID: |
| ret = nct6779; |
| break; |
| case NCT6791_ID: |
| ret = nct6791; |
| break; |
| case NCT6792_ID: |
| ret = nct6792; |
| break; |
| case NCT6102_ID: |
| ret = nct6102; |
| cr_wdt_timeout = NCT6102D_WDT_TIMEOUT; |
| cr_wdt_control = NCT6102D_WDT_CONTROL; |
| cr_wdt_csr = NCT6102D_WDT_CSR; |
| break; |
| case 0xff: |
| ret = -ENODEV; |
| break; |
| default: |
| ret = -ENODEV; |
| pr_err("Unsupported chip ID: 0x%02x\n", val); |
| break; |
| } |
| superio_exit(); |
| return ret; |
| } |
| |
| static int __init wdt_init(void) |
| { |
| int ret; |
| int chip; |
| const char * const chip_name[] = { |
| "W83627HF", |
| "W83627S", |
| "W83697HF", |
| "W83697UG", |
| "W83637HF", |
| "W83627THF", |
| "W83687THF", |
| "W83627EHF", |
| "W83627DHG", |
| "W83627UHG", |
| "W83667HG", |
| "W83667DHG-P", |
| "W83667HG-B", |
| "NCT6775", |
| "NCT6776", |
| "NCT6779", |
| "NCT6791", |
| "NCT6792", |
| "NCT6102", |
| }; |
| |
| wdt_io = 0x2e; |
| chip = wdt_find(0x2e); |
| if (chip < 0) { |
| wdt_io = 0x4e; |
| chip = wdt_find(0x4e); |
| if (chip < 0) |
| return chip; |
| } |
| |
| pr_info("WDT driver for %s Super I/O chip initialising\n", |
| chip_name[chip]); |
| |
| watchdog_init_timeout(&wdt_dev, timeout, NULL); |
| watchdog_set_nowayout(&wdt_dev, nowayout); |
| watchdog_stop_on_reboot(&wdt_dev); |
| |
| ret = w83627hf_init(&wdt_dev, chip); |
| if (ret) { |
| pr_err("failed to initialize watchdog (err=%d)\n", ret); |
| return ret; |
| } |
| |
| ret = watchdog_register_device(&wdt_dev); |
| if (ret) |
| return ret; |
| |
| pr_info("initialized. timeout=%d sec (nowayout=%d)\n", |
| wdt_dev.timeout, nowayout); |
| |
| return ret; |
| } |
| |
| static void __exit wdt_exit(void) |
| { |
| watchdog_unregister_device(&wdt_dev); |
| } |
| |
| module_init(wdt_init); |
| module_exit(wdt_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>"); |
| MODULE_DESCRIPTION("w83627hf/thf WDT driver"); |