| * Freescale 8xxx/3.0 Gb/s SATA nodes |
| |
| SATA nodes are defined to describe on-chip Serial ATA controllers. |
| Each SATA port should have its own node. |
| |
| Required properties: |
| - compatible : compatible list, contains 2 entries, first is |
| "fsl,CHIP-sata", where CHIP is the processor |
| (mpc8315, mpc8379, etc.) and the second is |
| "fsl,pq-sata" |
| - interrupts : <interrupt mapping for SATA IRQ> |
| - cell-index : controller index. |
| 1 for controller @ 0x18000 |
| 2 for controller @ 0x19000 |
| 3 for controller @ 0x1a000 |
| 4 for controller @ 0x1b000 |
| |
| Optional properties: |
| - interrupt-parent : optional, if needed for interrupt mapping |
| - reg : <registers mapping> |
| |
| Example: |
| sata@18000 { |
| compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; |
| reg = <0x18000 0x1000>; |
| cell-index = <1>; |
| interrupts = <2c 8>; |
| interrupt-parent = < &ipic >; |
| }; |
