| MAX98090 audio CODEC |
| |
| This device supports I2C only. |
| |
| Required properties: |
| |
| - compatible : "maxim,max98090" or "maxim,max98091". |
| |
| - reg : The I2C address of the device. |
| |
| - interrupts : The CODEC's interrupt output. |
| |
| Optional properties: |
| |
| - clocks: The phandle of the master clock to the CODEC |
| |
| - clock-names: Should be "mclk" |
| |
| - maxim,dmic-freq: Frequency at which to clock DMIC |
| |
| - maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are: |
| 0 - 2.2v |
| 1 - 2.55v |
| 2 - 2.4v |
| 3 - 2.8v |
| |
| Pins on the device (for linking into audio routes): |
| |
| * MIC1 |
| * MIC2 |
| * DMICL |
| * DMICR |
| * IN1 |
| * IN2 |
| * IN3 |
| * IN4 |
| * IN5 |
| * IN6 |
| * IN12 |
| * IN34 |
| * IN56 |
| * HPL |
| * HPR |
| * SPKL |
| * SPKR |
| * RCVL |
| * RCVR |
| * MICBIAS |
| |
| Example: |
| |
| audio-codec@10 { |
| compatible = "maxim,max98090"; |
| reg = <0x10>; |
| interrupt-parent = <&gpio>; |
| interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; |
| }; |
