| NVIDIA Tegra 20 I2S controller |
| |
| Required properties: |
| - compatible : "nvidia,tegra20-i2s" |
| - reg : Should contain I2S registers location and length |
| - interrupts : Should contain I2S interrupt |
| - resets : Must contain an entry for each entry in reset-names. |
| See ../reset/reset.txt for details. |
| - reset-names : Must include the following entries: |
| - i2s |
| - dmas : Must contain an entry for each entry in clock-names. |
| See ../dma/dma.txt for details. |
| - dma-names : Must include the following entries: |
| - rx |
| - tx |
| - clocks : Must contain one entry, for the module clock. |
| See ../clocks/clock-bindings.txt for details. |
| |
| Example: |
| |
| i2s@70002800 { |
| compatible = "nvidia,tegra20-i2s"; |
| reg = <0x70002800 0x200>; |
| interrupts = < 45 >; |
| clocks = <&tegra_car 11>; |
| resets = <&tegra_car 11>; |
| reset-names = "i2s"; |
| dmas = <&apbdma 21>, <&apbdma 21>; |
| dma-names = "rx", "tx"; |
| }; |
