|  | /* | 
|  | *  linux/drivers/ide/ide-disk.c	Version 1.18	Mar 05, 2003 | 
|  | * | 
|  | *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below) | 
|  | *  Copyright (C) 1998-2002  Linux ATA Development | 
|  | *				Andre Hedrick <andre@linux-ide.org> | 
|  | *  Copyright (C) 2003	     Red Hat <alan@redhat.com> | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  Mostly written by Mark Lord <mlord@pobox.com> | 
|  | *                and Gadi Oxman <gadio@netvision.net.il> | 
|  | *                and Andre Hedrick <andre@linux-ide.org> | 
|  | * | 
|  | * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. | 
|  | * | 
|  | * Version 1.00		move disk only code from ide.c to ide-disk.c | 
|  | *			support optional byte-swapping of all data | 
|  | * Version 1.01		fix previous byte-swapping code | 
|  | * Version 1.02		remove ", LBA" from drive identification msgs | 
|  | * Version 1.03		fix display of id->buf_size for big-endian | 
|  | * Version 1.04		add /proc configurable settings and S.M.A.R.T support | 
|  | * Version 1.05		add capacity support for ATA3 >= 8GB | 
|  | * Version 1.06		get boot-up messages to show full cyl count | 
|  | * Version 1.07		disable door-locking if it fails | 
|  | * Version 1.08		fixed CHS/LBA translations for ATA4 > 8GB, | 
|  | *			process of adding new ATA4 compliance. | 
|  | *			fixed problems in allowing fdisk to see | 
|  | *			the entire disk. | 
|  | * Version 1.09		added increment of rq->sector in ide_multwrite | 
|  | *			added UDMA 3/4 reporting | 
|  | * Version 1.10		request queue changes, Ultra DMA 100 | 
|  | * Version 1.11		added 48-bit lba | 
|  | * Version 1.12		adding taskfile io access method | 
|  | * Version 1.13		added standby and flush-cache for notifier | 
|  | * Version 1.14		added acoustic-wcache | 
|  | * Version 1.15		convert all calls to ide_raw_taskfile | 
|  | *				since args will return register content. | 
|  | * Version 1.16		added suspend-resume-checkpower | 
|  | * Version 1.17		do flush on standy, do flush on ATA < ATA6 | 
|  | *			fix wcache setup. | 
|  | */ | 
|  |  | 
|  | #define IDEDISK_VERSION	"1.18" | 
|  |  | 
|  | #undef REALLY_SLOW_IO		/* most systems can safely undef this */ | 
|  |  | 
|  | //#define DEBUG | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/genhd.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #define _IDE_DISK | 
|  |  | 
|  | #include <linux/ide.h> | 
|  |  | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | struct ide_disk_obj { | 
|  | ide_drive_t	*drive; | 
|  | ide_driver_t	*driver; | 
|  | struct gendisk	*disk; | 
|  | struct kref	kref; | 
|  | }; | 
|  |  | 
|  | static DECLARE_MUTEX(idedisk_ref_sem); | 
|  |  | 
|  | #define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref) | 
|  |  | 
|  | #define ide_disk_g(disk) \ | 
|  | container_of((disk)->private_data, struct ide_disk_obj, driver) | 
|  |  | 
|  | static struct ide_disk_obj *ide_disk_get(struct gendisk *disk) | 
|  | { | 
|  | struct ide_disk_obj *idkp = NULL; | 
|  |  | 
|  | down(&idedisk_ref_sem); | 
|  | idkp = ide_disk_g(disk); | 
|  | if (idkp) | 
|  | kref_get(&idkp->kref); | 
|  | up(&idedisk_ref_sem); | 
|  | return idkp; | 
|  | } | 
|  |  | 
|  | static void ide_disk_release(struct kref *); | 
|  |  | 
|  | static void ide_disk_put(struct ide_disk_obj *idkp) | 
|  | { | 
|  | down(&idedisk_ref_sem); | 
|  | kref_put(&idkp->kref, ide_disk_release); | 
|  | up(&idedisk_ref_sem); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" | 
|  | * value for this drive (from its reported identification information). | 
|  | * | 
|  | * Returns:	1 if lba_capacity looks sensible | 
|  | *		0 otherwise | 
|  | * | 
|  | * It is called only once for each drive. | 
|  | */ | 
|  | static int lba_capacity_is_ok (struct hd_driveid *id) | 
|  | { | 
|  | unsigned long lba_sects, chs_sects, head, tail; | 
|  |  | 
|  | /* No non-LBA info .. so valid! */ | 
|  | if (id->cyls == 0) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * The ATA spec tells large drives to return | 
|  | * C/H/S = 16383/16/63 independent of their size. | 
|  | * Some drives can be jumpered to use 15 heads instead of 16. | 
|  | * Some drives can be jumpered to use 4092 cyls instead of 16383. | 
|  | */ | 
|  | if ((id->cyls == 16383 | 
|  | || (id->cyls == 4092 && id->cur_cyls == 16383)) && | 
|  | id->sectors == 63 && | 
|  | (id->heads == 15 || id->heads == 16) && | 
|  | (id->lba_capacity >= 16383*63*id->heads)) | 
|  | return 1; | 
|  |  | 
|  | lba_sects   = id->lba_capacity; | 
|  | chs_sects   = id->cyls * id->heads * id->sectors; | 
|  |  | 
|  | /* perform a rough sanity check on lba_sects:  within 10% is OK */ | 
|  | if ((lba_sects - chs_sects) < chs_sects/10) | 
|  | return 1; | 
|  |  | 
|  | /* some drives have the word order reversed */ | 
|  | head = ((lba_sects >> 16) & 0xffff); | 
|  | tail = (lba_sects & 0xffff); | 
|  | lba_sects = (head | (tail << 16)); | 
|  | if ((lba_sects - chs_sects) < chs_sects/10) { | 
|  | id->lba_capacity = lba_sects; | 
|  | return 1;	/* lba_capacity is (now) good */ | 
|  | } | 
|  |  | 
|  | return 0;	/* lba_capacity value may be bad */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * __ide_do_rw_disk() issues READ and WRITE commands to a disk, | 
|  | * using LBA if supported, or CHS otherwise, to address sectors. | 
|  | */ | 
|  | static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) | 
|  | { | 
|  | ide_hwif_t *hwif	= HWIF(drive); | 
|  | unsigned int dma	= drive->using_dma; | 
|  | u8 lba48		= (drive->addressing == 1) ? 1 : 0; | 
|  | task_ioreg_t command	= WIN_NOP; | 
|  | ata_nsector_t		nsectors; | 
|  |  | 
|  | nsectors.all		= (u16) rq->nr_sectors; | 
|  |  | 
|  | if (hwif->no_lba48_dma && lba48 && dma) { | 
|  | if (block + rq->nr_sectors > 1ULL << 28) | 
|  | dma = 0; | 
|  | else | 
|  | lba48 = 0; | 
|  | } | 
|  |  | 
|  | if (!dma) { | 
|  | ide_init_sg_cmd(drive, rq); | 
|  | ide_map_sg(drive, rq); | 
|  | } | 
|  |  | 
|  | if (IDE_CONTROL_REG) | 
|  | hwif->OUTB(drive->ctl, IDE_CONTROL_REG); | 
|  |  | 
|  | /* FIXME: SELECT_MASK(drive, 0) ? */ | 
|  |  | 
|  | if (drive->select.b.lba) { | 
|  | if (lba48) { | 
|  | task_ioreg_t tasklets[10]; | 
|  |  | 
|  | pr_debug("%s: LBA=0x%012llx\n", drive->name, block); | 
|  |  | 
|  | tasklets[0] = 0; | 
|  | tasklets[1] = 0; | 
|  | tasklets[2] = nsectors.b.low; | 
|  | tasklets[3] = nsectors.b.high; | 
|  | tasklets[4] = (task_ioreg_t) block; | 
|  | tasklets[5] = (task_ioreg_t) (block>>8); | 
|  | tasklets[6] = (task_ioreg_t) (block>>16); | 
|  | tasklets[7] = (task_ioreg_t) (block>>24); | 
|  | if (sizeof(block) == 4) { | 
|  | tasklets[8] = (task_ioreg_t) 0; | 
|  | tasklets[9] = (task_ioreg_t) 0; | 
|  | } else { | 
|  | tasklets[8] = (task_ioreg_t)((u64)block >> 32); | 
|  | tasklets[9] = (task_ioreg_t)((u64)block >> 40); | 
|  | } | 
|  | #ifdef DEBUG | 
|  | printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", | 
|  | drive->name, tasklets[3], tasklets[2], | 
|  | tasklets[9], tasklets[8], tasklets[7], | 
|  | tasklets[6], tasklets[5], tasklets[4]); | 
|  | #endif | 
|  | hwif->OUTB(tasklets[1], IDE_FEATURE_REG); | 
|  | hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); | 
|  | hwif->OUTB(tasklets[7], IDE_SECTOR_REG); | 
|  | hwif->OUTB(tasklets[8], IDE_LCYL_REG); | 
|  | hwif->OUTB(tasklets[9], IDE_HCYL_REG); | 
|  |  | 
|  | hwif->OUTB(tasklets[0], IDE_FEATURE_REG); | 
|  | hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); | 
|  | hwif->OUTB(tasklets[4], IDE_SECTOR_REG); | 
|  | hwif->OUTB(tasklets[5], IDE_LCYL_REG); | 
|  | hwif->OUTB(tasklets[6], IDE_HCYL_REG); | 
|  | hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); | 
|  | } else { | 
|  | hwif->OUTB(0x00, IDE_FEATURE_REG); | 
|  | hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | 
|  | hwif->OUTB(block, IDE_SECTOR_REG); | 
|  | hwif->OUTB(block>>=8, IDE_LCYL_REG); | 
|  | hwif->OUTB(block>>=8, IDE_HCYL_REG); | 
|  | hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); | 
|  | } | 
|  | } else { | 
|  | unsigned int sect,head,cyl,track; | 
|  | track = (int)block / drive->sect; | 
|  | sect  = (int)block % drive->sect + 1; | 
|  | hwif->OUTB(sect, IDE_SECTOR_REG); | 
|  | head  = track % drive->head; | 
|  | cyl   = track / drive->head; | 
|  |  | 
|  | pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); | 
|  |  | 
|  | hwif->OUTB(0x00, IDE_FEATURE_REG); | 
|  | hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); | 
|  | hwif->OUTB(cyl, IDE_LCYL_REG); | 
|  | hwif->OUTB(cyl>>8, IDE_HCYL_REG); | 
|  | hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); | 
|  | } | 
|  |  | 
|  | if (dma) { | 
|  | if (!hwif->dma_setup(drive)) { | 
|  | if (rq_data_dir(rq)) { | 
|  | command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA; | 
|  | if (drive->vdma) | 
|  | command = lba48 ? WIN_WRITE_EXT: WIN_WRITE; | 
|  | } else { | 
|  | command = lba48 ? WIN_READDMA_EXT : WIN_READDMA; | 
|  | if (drive->vdma) | 
|  | command = lba48 ? WIN_READ_EXT: WIN_READ; | 
|  | } | 
|  | hwif->dma_exec_cmd(drive, command); | 
|  | hwif->dma_start(drive); | 
|  | return ide_started; | 
|  | } | 
|  | /* fallback to PIO */ | 
|  | ide_init_sg_cmd(drive, rq); | 
|  | } | 
|  |  | 
|  | if (rq_data_dir(rq) == READ) { | 
|  |  | 
|  | if (drive->mult_count) { | 
|  | hwif->data_phase = TASKFILE_MULTI_IN; | 
|  | command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD; | 
|  | } else { | 
|  | hwif->data_phase = TASKFILE_IN; | 
|  | command = lba48 ? WIN_READ_EXT : WIN_READ; | 
|  | } | 
|  |  | 
|  | ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL); | 
|  | return ide_started; | 
|  | } else { | 
|  | if (drive->mult_count) { | 
|  | hwif->data_phase = TASKFILE_MULTI_OUT; | 
|  | command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE; | 
|  | } else { | 
|  | hwif->data_phase = TASKFILE_OUT; | 
|  | command = lba48 ? WIN_WRITE_EXT : WIN_WRITE; | 
|  | } | 
|  |  | 
|  | /* FIXME: ->OUTBSYNC ? */ | 
|  | hwif->OUTB(command, IDE_COMMAND_REG); | 
|  |  | 
|  | return pre_task_out_intr(drive, rq); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 268435455  == 137439 MB or 28bit limit | 
|  | * 320173056  == 163929 MB or 48bit addressing | 
|  | * 1073741822 == 549756 MB or 48bit addressing fake drive | 
|  | */ | 
|  |  | 
|  | static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) | 
|  | { | 
|  | ide_hwif_t *hwif = HWIF(drive); | 
|  |  | 
|  | BUG_ON(drive->blocked); | 
|  |  | 
|  | if (!blk_fs_request(rq)) { | 
|  | blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command"); | 
|  | ide_end_request(drive, 0, 0); | 
|  | return ide_stopped; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", | 
|  | drive->name, rq_data_dir(rq) == READ ? "read" : "writ", | 
|  | block, rq->nr_sectors, (unsigned long)rq->buffer); | 
|  |  | 
|  | if (hwif->rw_disk) | 
|  | hwif->rw_disk(drive, rq); | 
|  |  | 
|  | return __ide_do_rw_disk(drive, rq, block); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Queries for true maximum capacity of the drive. | 
|  | * Returns maximum LBA address (> 0) of the drive, 0 if failed. | 
|  | */ | 
|  | static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) | 
|  | { | 
|  | ide_task_t args; | 
|  | unsigned long addr = 0; | 
|  |  | 
|  | /* Create IDE/ATA command request structure */ | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_SELECT_OFFSET]	= 0x40; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX; | 
|  | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler				= &task_no_data_intr; | 
|  | /* submit command request */ | 
|  | ide_raw_taskfile(drive, &args, NULL); | 
|  |  | 
|  | /* if OK, compute maximum address value */ | 
|  | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | 
|  | | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16) | 
|  | | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8) | 
|  | | ((args.tfRegister[IDE_SECTOR_OFFSET]       )); | 
|  | addr++;	/* since the return value is (maxlba - 1), we add 1 */ | 
|  | } | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) | 
|  | { | 
|  | ide_task_t args; | 
|  | unsigned long long addr = 0; | 
|  |  | 
|  | /* Create IDE/ATA command request structure */ | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  |  | 
|  | args.tfRegister[IDE_SELECT_OFFSET]	= 0x40; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_READ_NATIVE_MAX_EXT; | 
|  | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler				= &task_no_data_intr; | 
|  | /* submit command request */ | 
|  | ide_raw_taskfile(drive, &args, NULL); | 
|  |  | 
|  | /* if OK, compute maximum address value */ | 
|  | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | 
|  | (args.hobRegister[IDE_LCYL_OFFSET] <<  8) | | 
|  | args.hobRegister[IDE_SECTOR_OFFSET]; | 
|  | u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | 
|  | ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | 
|  | (args.tfRegister[IDE_SECTOR_OFFSET]); | 
|  | addr = ((__u64)high << 24) | low; | 
|  | addr++;	/* since the return value is (maxlba - 1), we add 1 */ | 
|  | } | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sets maximum virtual LBA address of the drive. | 
|  | * Returns new maximum virtual LBA address (> 0) or 0 on failure. | 
|  | */ | 
|  | static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) | 
|  | { | 
|  | ide_task_t args; | 
|  | unsigned long addr_set = 0; | 
|  |  | 
|  | addr_req--; | 
|  | /* Create IDE/ATA command request structure */ | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff); | 
|  | args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>  8) & 0xff); | 
|  | args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >> 16) & 0xff); | 
|  | args.tfRegister[IDE_SELECT_OFFSET]	= ((addr_req >> 24) & 0x0f) | 0x40; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX; | 
|  | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler				= &task_no_data_intr; | 
|  | /* submit command request */ | 
|  | ide_raw_taskfile(drive, &args, NULL); | 
|  | /* if OK, read new maximum address value */ | 
|  | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) | 
|  | | ((args.tfRegister[  IDE_HCYL_OFFSET]       ) << 16) | 
|  | | ((args.tfRegister[  IDE_LCYL_OFFSET]       ) <<  8) | 
|  | | ((args.tfRegister[IDE_SECTOR_OFFSET]       )); | 
|  | addr_set++; | 
|  | } | 
|  | return addr_set; | 
|  | } | 
|  |  | 
|  | static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) | 
|  | { | 
|  | ide_task_t args; | 
|  | unsigned long long addr_set = 0; | 
|  |  | 
|  | addr_req--; | 
|  | /* Create IDE/ATA command request structure */ | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_SECTOR_OFFSET]	= ((addr_req >>  0) & 0xff); | 
|  | args.tfRegister[IDE_LCYL_OFFSET]	= ((addr_req >>= 8) & 0xff); | 
|  | args.tfRegister[IDE_HCYL_OFFSET]	= ((addr_req >>= 8) & 0xff); | 
|  | args.tfRegister[IDE_SELECT_OFFSET]      = 0x40; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SET_MAX_EXT; | 
|  | args.hobRegister[IDE_SECTOR_OFFSET]	= (addr_req >>= 8) & 0xff; | 
|  | args.hobRegister[IDE_LCYL_OFFSET]	= (addr_req >>= 8) & 0xff; | 
|  | args.hobRegister[IDE_HCYL_OFFSET]	= (addr_req >>= 8) & 0xff; | 
|  | args.hobRegister[IDE_SELECT_OFFSET]	= 0x40; | 
|  | args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); | 
|  | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler				= &task_no_data_intr; | 
|  | /* submit command request */ | 
|  | ide_raw_taskfile(drive, &args, NULL); | 
|  | /* if OK, compute maximum address value */ | 
|  | if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { | 
|  | u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | | 
|  | (args.hobRegister[IDE_LCYL_OFFSET] <<  8) | | 
|  | args.hobRegister[IDE_SECTOR_OFFSET]; | 
|  | u32 low  = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | | 
|  | ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | | 
|  | (args.tfRegister[IDE_SECTOR_OFFSET]); | 
|  | addr_set = ((__u64)high << 24) | low; | 
|  | addr_set++; | 
|  | } | 
|  | return addr_set; | 
|  | } | 
|  |  | 
|  | static unsigned long long sectors_to_MB(unsigned long long n) | 
|  | { | 
|  | n <<= 9;		/* make it bytes */ | 
|  | do_div(n, 1000000);	/* make it MB */ | 
|  | return n; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Bits 10 of command_set_1 and cfs_enable_1 must be equal, | 
|  | * so on non-buggy drives we need test only one. | 
|  | * However, we should also check whether these fields are valid. | 
|  | */ | 
|  | static inline int idedisk_supports_hpa(const struct hd_driveid *id) | 
|  | { | 
|  | return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The same here. | 
|  | */ | 
|  | static inline int idedisk_supports_lba48(const struct hd_driveid *id) | 
|  | { | 
|  | return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) | 
|  | && id->lba_capacity_2; | 
|  | } | 
|  |  | 
|  | static inline void idedisk_check_hpa(ide_drive_t *drive) | 
|  | { | 
|  | unsigned long long capacity, set_max; | 
|  | int lba48 = idedisk_supports_lba48(drive->id); | 
|  |  | 
|  | capacity = drive->capacity64; | 
|  | if (lba48) | 
|  | set_max = idedisk_read_native_max_address_ext(drive); | 
|  | else | 
|  | set_max = idedisk_read_native_max_address(drive); | 
|  |  | 
|  | if (set_max <= capacity) | 
|  | return; | 
|  |  | 
|  | printk(KERN_INFO "%s: Host Protected Area detected.\n" | 
|  | "\tcurrent capacity is %llu sectors (%llu MB)\n" | 
|  | "\tnative  capacity is %llu sectors (%llu MB)\n", | 
|  | drive->name, | 
|  | capacity, sectors_to_MB(capacity), | 
|  | set_max, sectors_to_MB(set_max)); | 
|  |  | 
|  | if (lba48) | 
|  | set_max = idedisk_set_max_address_ext(drive, set_max); | 
|  | else | 
|  | set_max = idedisk_set_max_address(drive, set_max); | 
|  | if (set_max) { | 
|  | drive->capacity64 = set_max; | 
|  | printk(KERN_INFO "%s: Host Protected Area disabled.\n", | 
|  | drive->name); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Compute drive->capacity, the full capacity of the drive | 
|  | * Called with drive->id != NULL. | 
|  | * | 
|  | * To compute capacity, this uses either of | 
|  | * | 
|  | *    1. CHS value set by user       (whatever user sets will be trusted) | 
|  | *    2. LBA value from target drive (require new ATA feature) | 
|  | *    3. LBA value from system BIOS  (new one is OK, old one may break) | 
|  | *    4. CHS value from system BIOS  (traditional style) | 
|  | * | 
|  | * in above order (i.e., if value of higher priority is available, | 
|  | * reset will be ignored). | 
|  | */ | 
|  | static void init_idedisk_capacity (ide_drive_t  *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  | /* | 
|  | * If this drive supports the Host Protected Area feature set, | 
|  | * then we may need to change our opinion about the drive's capacity. | 
|  | */ | 
|  | int hpa = idedisk_supports_hpa(id); | 
|  |  | 
|  | if (idedisk_supports_lba48(id)) { | 
|  | /* drive speaks 48-bit LBA */ | 
|  | drive->select.b.lba = 1; | 
|  | drive->capacity64 = id->lba_capacity_2; | 
|  | if (hpa) | 
|  | idedisk_check_hpa(drive); | 
|  | } else if ((id->capability & 2) && lba_capacity_is_ok(id)) { | 
|  | /* drive speaks 28-bit LBA */ | 
|  | drive->select.b.lba = 1; | 
|  | drive->capacity64 = id->lba_capacity; | 
|  | if (hpa) | 
|  | idedisk_check_hpa(drive); | 
|  | } else { | 
|  | /* drive speaks boring old 28-bit CHS */ | 
|  | drive->capacity64 = drive->cyl * drive->head * drive->sect; | 
|  | } | 
|  | } | 
|  |  | 
|  | static sector_t idedisk_capacity (ide_drive_t *drive) | 
|  | { | 
|  | return drive->capacity64 - drive->sect0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PROC_FS | 
|  |  | 
|  | static int smart_enable(ide_drive_t *drive) | 
|  | { | 
|  | ide_task_t args; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_ENABLE; | 
|  | args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
|  | args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
|  | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler				= &task_no_data_intr; | 
|  | return ide_raw_taskfile(drive, &args, NULL); | 
|  | } | 
|  |  | 
|  | static int get_smart_values(ide_drive_t *drive, u8 *buf) | 
|  | { | 
|  | ide_task_t args; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_VALUES; | 
|  | args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01; | 
|  | args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
|  | args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
|  | args.command_type			= IDE_DRIVE_TASK_IN; | 
|  | args.data_phase				= TASKFILE_IN; | 
|  | args.handler				= &task_in_intr; | 
|  | (void) smart_enable(drive); | 
|  | return ide_raw_taskfile(drive, &args, buf); | 
|  | } | 
|  |  | 
|  | static int get_smart_thresholds(ide_drive_t *drive, u8 *buf) | 
|  | { | 
|  | ide_task_t args; | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_FEATURE_OFFSET]	= SMART_READ_THRESHOLDS; | 
|  | args.tfRegister[IDE_NSECTOR_OFFSET]	= 0x01; | 
|  | args.tfRegister[IDE_LCYL_OFFSET]	= SMART_LCYL_PASS; | 
|  | args.tfRegister[IDE_HCYL_OFFSET]	= SMART_HCYL_PASS; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SMART; | 
|  | args.command_type			= IDE_DRIVE_TASK_IN; | 
|  | args.data_phase				= TASKFILE_IN; | 
|  | args.handler				= &task_in_intr; | 
|  | (void) smart_enable(drive); | 
|  | return ide_raw_taskfile(drive, &args, buf); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_cache | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *) data; | 
|  | char		*out = page; | 
|  | int		len; | 
|  |  | 
|  | if (drive->id_read) | 
|  | len = sprintf(out,"%i\n", drive->id->buf_size / 2); | 
|  | else | 
|  | len = sprintf(out,"(none)\n"); | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_capacity | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t*drive = (ide_drive_t *)data; | 
|  | int len; | 
|  |  | 
|  | len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_smart_thresholds | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *)data; | 
|  | int		len = 0, i = 0; | 
|  |  | 
|  | if (!get_smart_thresholds(drive, page)) { | 
|  | unsigned short *val = (unsigned short *) page; | 
|  | char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
|  | page = out; | 
|  | do { | 
|  | out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
|  | val += 1; | 
|  | } while (i < (SECTOR_WORDS * 2)); | 
|  | len = out - page; | 
|  | } | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static int proc_idedisk_read_smart_values | 
|  | (char *page, char **start, off_t off, int count, int *eof, void *data) | 
|  | { | 
|  | ide_drive_t	*drive = (ide_drive_t *)data; | 
|  | int		len = 0, i = 0; | 
|  |  | 
|  | if (!get_smart_values(drive, page)) { | 
|  | unsigned short *val = (unsigned short *) page; | 
|  | char *out = ((char *)val) + (SECTOR_WORDS * 4); | 
|  | page = out; | 
|  | do { | 
|  | out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); | 
|  | val += 1; | 
|  | } while (i < (SECTOR_WORDS * 2)); | 
|  | len = out - page; | 
|  | } | 
|  | PROC_IDE_READ_RETURN(page,start,off,count,eof,len); | 
|  | } | 
|  |  | 
|  | static ide_proc_entry_t idedisk_proc[] = { | 
|  | { "cache",		S_IFREG|S_IRUGO,	proc_idedisk_read_cache,		NULL }, | 
|  | { "capacity",		S_IFREG|S_IRUGO,	proc_idedisk_read_capacity,		NULL }, | 
|  | { "geometry",		S_IFREG|S_IRUGO,	proc_ide_read_geometry,			NULL }, | 
|  | { "smart_values",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_values,		NULL }, | 
|  | { "smart_thresholds",	S_IFREG|S_IRUSR,	proc_idedisk_read_smart_thresholds,	NULL }, | 
|  | { NULL, 0, NULL, NULL } | 
|  | }; | 
|  |  | 
|  | #else | 
|  |  | 
|  | #define	idedisk_proc	NULL | 
|  |  | 
|  | #endif	/* CONFIG_PROC_FS */ | 
|  |  | 
|  | static void idedisk_prepare_flush(request_queue_t *q, struct request *rq) | 
|  | { | 
|  | ide_drive_t *drive = q->queuedata; | 
|  |  | 
|  | memset(rq->cmd, 0, sizeof(rq->cmd)); | 
|  |  | 
|  | if (ide_id_has_flush_cache_ext(drive->id) && | 
|  | (drive->capacity64 >= (1UL << 28))) | 
|  | rq->cmd[0] = WIN_FLUSH_CACHE_EXT; | 
|  | else | 
|  | rq->cmd[0] = WIN_FLUSH_CACHE; | 
|  |  | 
|  |  | 
|  | rq->flags |= REQ_DRIVE_TASK; | 
|  | rq->buffer = rq->cmd; | 
|  | } | 
|  |  | 
|  | static int idedisk_issue_flush(request_queue_t *q, struct gendisk *disk, | 
|  | sector_t *error_sector) | 
|  | { | 
|  | ide_drive_t *drive = q->queuedata; | 
|  | struct request *rq; | 
|  | int ret; | 
|  |  | 
|  | if (!drive->wcache) | 
|  | return 0; | 
|  |  | 
|  | rq = blk_get_request(q, WRITE, __GFP_WAIT); | 
|  |  | 
|  | idedisk_prepare_flush(q, rq); | 
|  |  | 
|  | ret = blk_execute_rq(q, disk, rq, 0); | 
|  |  | 
|  | /* | 
|  | * if we failed and caller wants error offset, get it | 
|  | */ | 
|  | if (ret && error_sector) | 
|  | *error_sector = ide_get_error_location(drive, rq->cmd); | 
|  |  | 
|  | blk_put_request(rq); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is tightly woven into the driver->do_special can not touch. | 
|  | * DON'T do it again until a total personality rewrite is committed. | 
|  | */ | 
|  | static int set_multcount(ide_drive_t *drive, int arg) | 
|  | { | 
|  | struct request rq; | 
|  |  | 
|  | if (drive->special.b.set_multmode) | 
|  | return -EBUSY; | 
|  | ide_init_drive_cmd (&rq); | 
|  | rq.flags = REQ_DRIVE_CMD; | 
|  | drive->mult_req = arg; | 
|  | drive->special.b.set_multmode = 1; | 
|  | (void) ide_do_drive_cmd (drive, &rq, ide_wait); | 
|  | return (drive->mult_count == arg) ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | static int set_nowerr(ide_drive_t *drive, int arg) | 
|  | { | 
|  | if (ide_spin_wait_hwgroup(drive)) | 
|  | return -EBUSY; | 
|  | drive->nowerr = arg; | 
|  | drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT; | 
|  | spin_unlock_irq(&ide_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void update_ordered(ide_drive_t *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  | unsigned ordered = QUEUE_ORDERED_NONE; | 
|  | prepare_flush_fn *prep_fn = NULL; | 
|  | issue_flush_fn *issue_fn = NULL; | 
|  |  | 
|  | if (drive->wcache) { | 
|  | unsigned long long capacity; | 
|  | int barrier; | 
|  | /* | 
|  | * We must avoid issuing commands a drive does not | 
|  | * understand or we may crash it. We check flush cache | 
|  | * is supported. We also check we have the LBA48 flush | 
|  | * cache if the drive capacity is too large. By this | 
|  | * time we have trimmed the drive capacity if LBA48 is | 
|  | * not available so we don't need to recheck that. | 
|  | */ | 
|  | capacity = idedisk_capacity(drive); | 
|  | barrier = ide_id_has_flush_cache(id) && | 
|  | (drive->addressing == 0 || capacity <= (1ULL << 28) || | 
|  | ide_id_has_flush_cache_ext(id)); | 
|  |  | 
|  | printk(KERN_INFO "%s: cache flushes %ssupported\n", | 
|  | drive->name, barrier ? "" : "not"); | 
|  |  | 
|  | if (barrier) { | 
|  | ordered = QUEUE_ORDERED_DRAIN_FLUSH; | 
|  | prep_fn = idedisk_prepare_flush; | 
|  | issue_fn = idedisk_issue_flush; | 
|  | } | 
|  | } else | 
|  | ordered = QUEUE_ORDERED_DRAIN; | 
|  |  | 
|  | blk_queue_ordered(drive->queue, ordered, prep_fn); | 
|  | blk_queue_issue_flush_fn(drive->queue, issue_fn); | 
|  | } | 
|  |  | 
|  | static int write_cache(ide_drive_t *drive, int arg) | 
|  | { | 
|  | ide_task_t args; | 
|  | int err = 1; | 
|  |  | 
|  | if (ide_id_has_flush_cache(drive->id)) { | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? | 
|  | SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES; | 
|  | args.command_type		= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler			= &task_no_data_intr; | 
|  | err = ide_raw_taskfile(drive, &args, NULL); | 
|  | if (err == 0) | 
|  | drive->wcache = arg; | 
|  | } | 
|  |  | 
|  | update_ordered(drive); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int do_idedisk_flushcache (ide_drive_t *drive) | 
|  | { | 
|  | ide_task_t args; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | if (ide_id_has_flush_cache_ext(drive->id)) | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE_EXT; | 
|  | else | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_FLUSH_CACHE; | 
|  | args.command_type			= IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler				= &task_no_data_intr; | 
|  | return ide_raw_taskfile(drive, &args, NULL); | 
|  | } | 
|  |  | 
|  | static int set_acoustic (ide_drive_t *drive, int arg) | 
|  | { | 
|  | ide_task_t args; | 
|  |  | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_FEATURE_OFFSET]	= (arg) ? SETFEATURES_EN_AAM : | 
|  | SETFEATURES_DIS_AAM; | 
|  | args.tfRegister[IDE_NSECTOR_OFFSET]	= arg; | 
|  | args.tfRegister[IDE_COMMAND_OFFSET]	= WIN_SETFEATURES; | 
|  | args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler	  = &task_no_data_intr; | 
|  | ide_raw_taskfile(drive, &args, NULL); | 
|  | drive->acoustic = arg; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * drive->addressing: | 
|  | *	0: 28-bit | 
|  | *	1: 48-bit | 
|  | *	2: 48-bit capable doing 28-bit | 
|  | */ | 
|  | static int set_lba_addressing(ide_drive_t *drive, int arg) | 
|  | { | 
|  | drive->addressing =  0; | 
|  |  | 
|  | if (HWIF(drive)->no_lba48) | 
|  | return 0; | 
|  |  | 
|  | if (!idedisk_supports_lba48(drive->id)) | 
|  | return -EIO; | 
|  | drive->addressing = arg; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void idedisk_add_settings(ide_drive_t *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  |  | 
|  | ide_add_setting(drive,	"bios_cyl",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->bios_cyl,		NULL); | 
|  | ide_add_setting(drive,	"bios_head",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	255,				1,	1,	&drive->bios_head,		NULL); | 
|  | ide_add_setting(drive,	"bios_sect",		SETTING_RW,					-1,			-1,			TYPE_BYTE,	0,	63,				1,	1,	&drive->bios_sect,		NULL); | 
|  | ide_add_setting(drive,	"address",		SETTING_RW,					HDIO_GET_ADDRESS,	HDIO_SET_ADDRESS,	TYPE_INTA,	0,	2,				1,	1,	&drive->addressing,	set_lba_addressing); | 
|  | ide_add_setting(drive,	"bswap",		SETTING_READ,					-1,			-1,			TYPE_BYTE,	0,	1,				1,	1,	&drive->bswap,			NULL); | 
|  | ide_add_setting(drive,	"multcount",		id ? SETTING_RW : SETTING_READ,			HDIO_GET_MULTCOUNT,	HDIO_SET_MULTCOUNT,	TYPE_BYTE,	0,	id ? id->max_multsect : 0,	1,	1,	&drive->mult_count,		set_multcount); | 
|  | ide_add_setting(drive,	"nowerr",		SETTING_RW,					HDIO_GET_NOWERR,	HDIO_SET_NOWERR,	TYPE_BYTE,	0,	1,				1,	1,	&drive->nowerr,			set_nowerr); | 
|  | ide_add_setting(drive,	"lun",			SETTING_RW,					-1,			-1,			TYPE_INT,	0,	7,				1,	1,	&drive->lun,			NULL); | 
|  | ide_add_setting(drive,	"wcache",		SETTING_RW,					HDIO_GET_WCACHE,	HDIO_SET_WCACHE,	TYPE_BYTE,	0,	1,				1,	1,	&drive->wcache,			write_cache); | 
|  | ide_add_setting(drive,	"acoustic",		SETTING_RW,					HDIO_GET_ACOUSTIC,	HDIO_SET_ACOUSTIC,	TYPE_BYTE,	0,	254,				1,	1,	&drive->acoustic,		set_acoustic); | 
|  | ide_add_setting(drive,	"failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->failures,		NULL); | 
|  | ide_add_setting(drive,	"max_failures",		SETTING_RW,					-1,			-1,			TYPE_INT,	0,	65535,				1,	1,	&drive->max_failures,		NULL); | 
|  | } | 
|  |  | 
|  | static void idedisk_setup (ide_drive_t *drive) | 
|  | { | 
|  | struct hd_driveid *id = drive->id; | 
|  | unsigned long long capacity; | 
|  |  | 
|  | idedisk_add_settings(drive); | 
|  |  | 
|  | if (drive->id_read == 0) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * CompactFlash cards and their brethern look just like hard drives | 
|  | * to us, but they are removable and don't have a doorlock mechanism. | 
|  | */ | 
|  | if (drive->removable && !(drive->is_flash)) { | 
|  | /* | 
|  | * Removable disks (eg. SYQUEST); ignore 'WD' drives | 
|  | */ | 
|  | if (id->model[0] != 'W' || id->model[1] != 'D') { | 
|  | drive->doorlocking = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | (void)set_lba_addressing(drive, 1); | 
|  |  | 
|  | if (drive->addressing == 1) { | 
|  | ide_hwif_t *hwif = HWIF(drive); | 
|  | int max_s = 2048; | 
|  |  | 
|  | if (max_s > hwif->rqsize) | 
|  | max_s = hwif->rqsize; | 
|  |  | 
|  | blk_queue_max_sectors(drive->queue, max_s); | 
|  | } | 
|  |  | 
|  | printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); | 
|  |  | 
|  | /* calculate drive capacity, and select LBA if possible */ | 
|  | init_idedisk_capacity (drive); | 
|  |  | 
|  | /* limit drive capacity to 137GB if LBA48 cannot be used */ | 
|  | if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { | 
|  | printk(KERN_WARNING "%s: cannot use LBA48 - full capacity " | 
|  | "%llu sectors (%llu MB)\n", | 
|  | drive->name, (unsigned long long)drive->capacity64, | 
|  | sectors_to_MB(drive->capacity64)); | 
|  | drive->capacity64 = 1ULL << 28; | 
|  | } | 
|  |  | 
|  | if (drive->hwif->no_lba48_dma && drive->addressing) { | 
|  | if (drive->capacity64 > 1ULL << 28) { | 
|  | printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" | 
|  | " be used for accessing sectors > %u\n", | 
|  | drive->name, 1 << 28); | 
|  | } else | 
|  | drive->addressing = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if possible, give fdisk access to more of the drive, | 
|  | * by correcting bios_cyls: | 
|  | */ | 
|  | capacity = idedisk_capacity (drive); | 
|  | if (!drive->forced_geom) { | 
|  |  | 
|  | if (idedisk_supports_lba48(drive->id)) { | 
|  | /* compatibility */ | 
|  | drive->bios_sect = 63; | 
|  | drive->bios_head = 255; | 
|  | } | 
|  |  | 
|  | if (drive->bios_sect && drive->bios_head) { | 
|  | unsigned int cap0 = capacity; /* truncate to 32 bits */ | 
|  | unsigned int cylsz, cyl; | 
|  |  | 
|  | if (cap0 != capacity) | 
|  | drive->bios_cyl = 65535; | 
|  | else { | 
|  | cylsz = drive->bios_sect * drive->bios_head; | 
|  | cyl = cap0 / cylsz; | 
|  | if (cyl > 65535) | 
|  | cyl = 65535; | 
|  | if (cyl > drive->bios_cyl) | 
|  | drive->bios_cyl = cyl; | 
|  | } | 
|  | } | 
|  | } | 
|  | printk(KERN_INFO "%s: %llu sectors (%llu MB)", | 
|  | drive->name, capacity, sectors_to_MB(capacity)); | 
|  |  | 
|  | /* Only print cache size when it was specified */ | 
|  | if (id->buf_size) | 
|  | printk (" w/%dKiB Cache", id->buf_size/2); | 
|  |  | 
|  | printk(", CHS=%d/%d/%d", | 
|  | drive->bios_cyl, drive->bios_head, drive->bios_sect); | 
|  | if (drive->using_dma) | 
|  | ide_dma_verbose(drive); | 
|  | printk("\n"); | 
|  |  | 
|  | drive->no_io_32bit = id->dword_io ? 1 : 0; | 
|  |  | 
|  | /* write cache enabled? */ | 
|  | if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) | 
|  | drive->wcache = 1; | 
|  |  | 
|  | write_cache(drive, 1); | 
|  | } | 
|  |  | 
|  | static void ide_cacheflush_p(ide_drive_t *drive) | 
|  | { | 
|  | if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) | 
|  | return; | 
|  |  | 
|  | if (do_idedisk_flushcache(drive)) | 
|  | printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); | 
|  | } | 
|  |  | 
|  | static int ide_disk_remove(struct device *dev) | 
|  | { | 
|  | ide_drive_t *drive = to_ide_device(dev); | 
|  | struct ide_disk_obj *idkp = drive->driver_data; | 
|  | struct gendisk *g = idkp->disk; | 
|  |  | 
|  | ide_unregister_subdriver(drive, idkp->driver); | 
|  |  | 
|  | del_gendisk(g); | 
|  |  | 
|  | ide_cacheflush_p(drive); | 
|  |  | 
|  | ide_disk_put(idkp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ide_disk_release(struct kref *kref) | 
|  | { | 
|  | struct ide_disk_obj *idkp = to_ide_disk(kref); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  | struct gendisk *g = idkp->disk; | 
|  |  | 
|  | drive->driver_data = NULL; | 
|  | drive->devfs_name[0] = '\0'; | 
|  | g->private_data = NULL; | 
|  | put_disk(g); | 
|  | kfree(idkp); | 
|  | } | 
|  |  | 
|  | static int ide_disk_probe(struct device *dev); | 
|  |  | 
|  | static void ide_device_shutdown(struct device *dev) | 
|  | { | 
|  | ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); | 
|  |  | 
|  | #ifdef	CONFIG_ALPHA | 
|  | /* On Alpha, halt(8) doesn't actually turn the machine off, | 
|  | it puts you into the sort of firmware monitor. Typically, | 
|  | it's used to boot another kernel image, so it's not much | 
|  | different from reboot(8). Therefore, we don't need to | 
|  | spin down the disk in this case, especially since Alpha | 
|  | firmware doesn't handle disks in standby mode properly. | 
|  | On the other hand, it's reasonably safe to turn the power | 
|  | off when the shutdown process reaches the firmware prompt, | 
|  | as the firmware initialization takes rather long time - | 
|  | at least 10 seconds, which should be sufficient for | 
|  | the disk to expire its write cache. */ | 
|  | if (system_state != SYSTEM_POWER_OFF) { | 
|  | #else | 
|  | if (system_state == SYSTEM_RESTART) { | 
|  | #endif | 
|  | ide_cacheflush_p(drive); | 
|  | return; | 
|  | } | 
|  |  | 
|  | printk("Shutdown: %s\n", drive->name); | 
|  | dev->bus->suspend(dev, PMSG_SUSPEND); | 
|  | } | 
|  |  | 
|  | static ide_driver_t idedisk_driver = { | 
|  | .gen_driver = { | 
|  | .owner		= THIS_MODULE, | 
|  | .name		= "ide-disk", | 
|  | .bus		= &ide_bus_type, | 
|  | .probe		= ide_disk_probe, | 
|  | .remove		= ide_disk_remove, | 
|  | .shutdown	= ide_device_shutdown, | 
|  | }, | 
|  | .version		= IDEDISK_VERSION, | 
|  | .media			= ide_disk, | 
|  | .supports_dsc_overlap	= 0, | 
|  | .do_request		= ide_do_rw_disk, | 
|  | .end_request		= ide_end_request, | 
|  | .error			= __ide_error, | 
|  | .abort			= __ide_abort, | 
|  | .proc			= idedisk_proc, | 
|  | }; | 
|  |  | 
|  | static int idedisk_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct gendisk *disk = inode->i_bdev->bd_disk; | 
|  | struct ide_disk_obj *idkp; | 
|  | ide_drive_t *drive; | 
|  |  | 
|  | if (!(idkp = ide_disk_get(disk))) | 
|  | return -ENXIO; | 
|  |  | 
|  | drive = idkp->drive; | 
|  |  | 
|  | drive->usage++; | 
|  | if (drive->removable && drive->usage == 1) { | 
|  | ide_task_t args; | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK; | 
|  | args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler	  = &task_no_data_intr; | 
|  | check_disk_change(inode->i_bdev); | 
|  | /* | 
|  | * Ignore the return code from door_lock, | 
|  | * since the open() has already succeeded, | 
|  | * and the door_lock is irrelevant at this point. | 
|  | */ | 
|  | if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | 
|  | drive->doorlocking = 0; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int idedisk_release(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct gendisk *disk = inode->i_bdev->bd_disk; | 
|  | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  |  | 
|  | if (drive->usage == 1) | 
|  | ide_cacheflush_p(drive); | 
|  | if (drive->removable && drive->usage == 1) { | 
|  | ide_task_t args; | 
|  | memset(&args, 0, sizeof(ide_task_t)); | 
|  | args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK; | 
|  | args.command_type = IDE_DRIVE_TASK_NO_DATA; | 
|  | args.handler	  = &task_no_data_intr; | 
|  | if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) | 
|  | drive->doorlocking = 0; | 
|  | } | 
|  | drive->usage--; | 
|  |  | 
|  | ide_disk_put(idkp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | 
|  | { | 
|  | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  |  | 
|  | geo->heads = drive->bios_head; | 
|  | geo->sectors = drive->bios_sect; | 
|  | geo->cylinders = (u16)drive->bios_cyl; /* truncate */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int idedisk_ioctl(struct inode *inode, struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct block_device *bdev = inode->i_bdev; | 
|  | struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk); | 
|  | return generic_ide_ioctl(idkp->drive, file, bdev, cmd, arg); | 
|  | } | 
|  |  | 
|  | static int idedisk_media_changed(struct gendisk *disk) | 
|  | { | 
|  | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | ide_drive_t *drive = idkp->drive; | 
|  |  | 
|  | /* do not scan partitions twice if this is a removable device */ | 
|  | if (drive->attach) { | 
|  | drive->attach = 0; | 
|  | return 0; | 
|  | } | 
|  | /* if removable, always assume it was changed */ | 
|  | return drive->removable; | 
|  | } | 
|  |  | 
|  | static int idedisk_revalidate_disk(struct gendisk *disk) | 
|  | { | 
|  | struct ide_disk_obj *idkp = ide_disk_g(disk); | 
|  | set_capacity(disk, idedisk_capacity(idkp->drive)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct block_device_operations idedisk_ops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= idedisk_open, | 
|  | .release	= idedisk_release, | 
|  | .ioctl		= idedisk_ioctl, | 
|  | .getgeo		= idedisk_getgeo, | 
|  | .media_changed	= idedisk_media_changed, | 
|  | .revalidate_disk= idedisk_revalidate_disk | 
|  | }; | 
|  |  | 
|  | MODULE_DESCRIPTION("ATA DISK Driver"); | 
|  |  | 
|  | static int ide_disk_probe(struct device *dev) | 
|  | { | 
|  | ide_drive_t *drive = to_ide_device(dev); | 
|  | struct ide_disk_obj *idkp; | 
|  | struct gendisk *g; | 
|  |  | 
|  | /* strstr("foo", "") is non-NULL */ | 
|  | if (!strstr("ide-disk", drive->driver_req)) | 
|  | goto failed; | 
|  | if (!drive->present) | 
|  | goto failed; | 
|  | if (drive->media != ide_disk) | 
|  | goto failed; | 
|  |  | 
|  | idkp = kzalloc(sizeof(*idkp), GFP_KERNEL); | 
|  | if (!idkp) | 
|  | goto failed; | 
|  |  | 
|  | g = alloc_disk_node(1 << PARTN_BITS, | 
|  | hwif_to_node(drive->hwif)); | 
|  | if (!g) | 
|  | goto out_free_idkp; | 
|  |  | 
|  | ide_init_disk(g, drive); | 
|  |  | 
|  | ide_register_subdriver(drive, &idedisk_driver); | 
|  |  | 
|  | kref_init(&idkp->kref); | 
|  |  | 
|  | idkp->drive = drive; | 
|  | idkp->driver = &idedisk_driver; | 
|  | idkp->disk = g; | 
|  |  | 
|  | g->private_data = &idkp->driver; | 
|  |  | 
|  | drive->driver_data = idkp; | 
|  |  | 
|  | idedisk_setup(drive); | 
|  | if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { | 
|  | printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", | 
|  | drive->name, drive->head); | 
|  | drive->attach = 0; | 
|  | } else | 
|  | drive->attach = 1; | 
|  |  | 
|  | g->minors = 1 << PARTN_BITS; | 
|  | strcpy(g->devfs_name, drive->devfs_name); | 
|  | g->driverfs_dev = &drive->gendev; | 
|  | g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0; | 
|  | set_capacity(g, idedisk_capacity(drive)); | 
|  | g->fops = &idedisk_ops; | 
|  | add_disk(g); | 
|  | return 0; | 
|  |  | 
|  | out_free_idkp: | 
|  | kfree(idkp); | 
|  | failed: | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static void __exit idedisk_exit (void) | 
|  | { | 
|  | driver_unregister(&idedisk_driver.gen_driver); | 
|  | } | 
|  |  | 
|  | static int __init idedisk_init(void) | 
|  | { | 
|  | return driver_register(&idedisk_driver.gen_driver); | 
|  | } | 
|  |  | 
|  | MODULE_ALIAS("ide:*m-disk*"); | 
|  | module_init(idedisk_init); | 
|  | module_exit(idedisk_exit); | 
|  | MODULE_LICENSE("GPL"); |