|  | /* | 
|  | * Copyright(c) 2015 EZchip Technologies. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms and conditions of the GNU General Public License, | 
|  | * version 2, as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in | 
|  | * the file called "COPYING". | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_net.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include "nps_enet.h" | 
|  |  | 
|  | #define DRV_NAME			"nps_mgt_enet" | 
|  |  | 
|  | static void nps_enet_clean_rx_fifo(struct net_device *ndev, u32 frame_len) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | u32 i, len = DIV_ROUND_UP(frame_len, sizeof(u32)); | 
|  |  | 
|  | /* Empty Rx FIFO buffer by reading all words */ | 
|  | for (i = 0; i < len; i++) | 
|  | nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); | 
|  | } | 
|  |  | 
|  | static void nps_enet_read_rx_fifo(struct net_device *ndev, | 
|  | unsigned char *dst, u32 length) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | s32 i, last = length & (sizeof(u32) - 1); | 
|  | u32 *reg = (u32 *)dst, len = length / sizeof(u32); | 
|  | bool dst_is_aligned = IS_ALIGNED((unsigned long)dst, sizeof(u32)); | 
|  |  | 
|  | /* In case dst is not aligned we need an intermediate buffer */ | 
|  | if (dst_is_aligned) | 
|  | for (i = 0; i < len; i++, reg++) | 
|  | *reg = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); | 
|  | else { /* !dst_is_aligned */ | 
|  | for (i = 0; i < len; i++, reg++) { | 
|  | u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); | 
|  | put_unaligned(buf, reg); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* copy last bytes (if any) */ | 
|  | if (last) { | 
|  | u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); | 
|  | memcpy((u8*)reg, &buf, last); | 
|  | } | 
|  | } | 
|  |  | 
|  | static u32 nps_enet_rx_handler(struct net_device *ndev) | 
|  | { | 
|  | u32 frame_len, err = 0; | 
|  | u32 work_done = 0; | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct sk_buff *skb; | 
|  | struct nps_enet_rx_ctl rx_ctrl; | 
|  |  | 
|  | rx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL); | 
|  | frame_len = rx_ctrl.nr; | 
|  |  | 
|  | /* Check if we got RX */ | 
|  | if (!rx_ctrl.cr) | 
|  | return work_done; | 
|  |  | 
|  | /* If we got here there is a work for us */ | 
|  | work_done++; | 
|  |  | 
|  | /* Check Rx error */ | 
|  | if (rx_ctrl.er) { | 
|  | ndev->stats.rx_errors++; | 
|  | err = 1; | 
|  | } | 
|  |  | 
|  | /* Check Rx CRC error */ | 
|  | if (rx_ctrl.crc) { | 
|  | ndev->stats.rx_crc_errors++; | 
|  | ndev->stats.rx_dropped++; | 
|  | err = 1; | 
|  | } | 
|  |  | 
|  | /* Check Frame length Min 64b */ | 
|  | if (unlikely(frame_len < ETH_ZLEN)) { | 
|  | ndev->stats.rx_length_errors++; | 
|  | ndev->stats.rx_dropped++; | 
|  | err = 1; | 
|  | } | 
|  |  | 
|  | if (err) | 
|  | goto rx_irq_clean; | 
|  |  | 
|  | /* Skb allocation */ | 
|  | skb = netdev_alloc_skb_ip_align(ndev, frame_len); | 
|  | if (unlikely(!skb)) { | 
|  | ndev->stats.rx_errors++; | 
|  | ndev->stats.rx_dropped++; | 
|  | goto rx_irq_clean; | 
|  | } | 
|  |  | 
|  | /* Copy frame from Rx fifo into the skb */ | 
|  | nps_enet_read_rx_fifo(ndev, skb->data, frame_len); | 
|  |  | 
|  | skb_put(skb, frame_len); | 
|  | skb->protocol = eth_type_trans(skb, ndev); | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  |  | 
|  | ndev->stats.rx_packets++; | 
|  | ndev->stats.rx_bytes += frame_len; | 
|  | netif_receive_skb(skb); | 
|  |  | 
|  | goto rx_irq_frame_done; | 
|  |  | 
|  | rx_irq_clean: | 
|  | /* Clean Rx fifo */ | 
|  | nps_enet_clean_rx_fifo(ndev, frame_len); | 
|  |  | 
|  | rx_irq_frame_done: | 
|  | /* Ack Rx ctrl register */ | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_RX_CTL, 0); | 
|  |  | 
|  | return work_done; | 
|  | } | 
|  |  | 
|  | static void nps_enet_tx_handler(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_tx_ctl tx_ctrl; | 
|  |  | 
|  | tx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); | 
|  |  | 
|  | /* Check if we got TX */ | 
|  | if (!priv->tx_packet_sent || tx_ctrl.ct) | 
|  | return; | 
|  |  | 
|  | /* Ack Tx ctrl register */ | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, 0); | 
|  |  | 
|  | /* Check Tx transmit error */ | 
|  | if (unlikely(tx_ctrl.et)) { | 
|  | ndev->stats.tx_errors++; | 
|  | } else { | 
|  | ndev->stats.tx_packets++; | 
|  | ndev->stats.tx_bytes += tx_ctrl.nt; | 
|  | } | 
|  |  | 
|  | dev_kfree_skb(priv->tx_skb); | 
|  | priv->tx_packet_sent = false; | 
|  |  | 
|  | if (netif_queue_stopped(ndev)) | 
|  | netif_wake_queue(ndev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_poll - NAPI poll handler. | 
|  | * @napi:       Pointer to napi_struct structure. | 
|  | * @budget:     How many frames to process on one call. | 
|  | * | 
|  | * returns:     Number of processed frames | 
|  | */ | 
|  | static int nps_enet_poll(struct napi_struct *napi, int budget) | 
|  | { | 
|  | struct net_device *ndev = napi->dev; | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | u32 work_done; | 
|  |  | 
|  | nps_enet_tx_handler(ndev); | 
|  | work_done = nps_enet_rx_handler(ndev); | 
|  | if (work_done < budget) { | 
|  | struct nps_enet_buf_int_enable buf_int_enable; | 
|  |  | 
|  | napi_complete(napi); | 
|  | buf_int_enable.rx_rdy = NPS_ENET_ENABLE; | 
|  | buf_int_enable.tx_done = NPS_ENET_ENABLE; | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, | 
|  | buf_int_enable.value); | 
|  | } | 
|  |  | 
|  | return work_done; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_irq_handler - Global interrupt handler for ENET. | 
|  | * @irq:                irq number. | 
|  | * @dev_instance:       device instance. | 
|  | * | 
|  | * returns: IRQ_HANDLED for all cases. | 
|  | * | 
|  | * EZchip ENET has 2 interrupt causes, and depending on bits raised in | 
|  | * CTRL registers we may tell what is a reason for interrupt to fire up. | 
|  | * We got one for RX and the other for TX (completion). | 
|  | */ | 
|  | static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance) | 
|  | { | 
|  | struct net_device *ndev = dev_instance; | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_rx_ctl rx_ctrl; | 
|  | struct nps_enet_tx_ctl tx_ctrl; | 
|  |  | 
|  | rx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL); | 
|  | tx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); | 
|  |  | 
|  | if ((!tx_ctrl.ct && priv->tx_packet_sent) || rx_ctrl.cr) | 
|  | if (likely(napi_schedule_prep(&priv->napi))) { | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); | 
|  | __napi_schedule(&priv->napi); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void nps_enet_set_hw_mac_address(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_ge_mac_cfg_1 ge_mac_cfg_1; | 
|  | struct nps_enet_ge_mac_cfg_2 *ge_mac_cfg_2 = &priv->ge_mac_cfg_2; | 
|  |  | 
|  | /* set MAC address in HW */ | 
|  | ge_mac_cfg_1.octet_0 = ndev->dev_addr[0]; | 
|  | ge_mac_cfg_1.octet_1 = ndev->dev_addr[1]; | 
|  | ge_mac_cfg_1.octet_2 = ndev->dev_addr[2]; | 
|  | ge_mac_cfg_1.octet_3 = ndev->dev_addr[3]; | 
|  | ge_mac_cfg_2->octet_4 = ndev->dev_addr[4]; | 
|  | ge_mac_cfg_2->octet_5 = ndev->dev_addr[5]; | 
|  |  | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_1, | 
|  | ge_mac_cfg_1.value); | 
|  |  | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, | 
|  | ge_mac_cfg_2->value); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_hw_reset - Reset the network device. | 
|  | * @ndev:       Pointer to the network device. | 
|  | * | 
|  | * This function reset the PCS and TX fifo. | 
|  | * The programming model is to set the relevant reset bits | 
|  | * wait for some time for this to propagate and then unset | 
|  | * the reset bits. This way we ensure that reset procedure | 
|  | * is done successfully by device. | 
|  | */ | 
|  | static void nps_enet_hw_reset(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_ge_rst ge_rst; | 
|  | struct nps_enet_phase_fifo_ctl phase_fifo_ctl; | 
|  |  | 
|  | ge_rst.value = 0; | 
|  | phase_fifo_ctl.value = 0; | 
|  | /* Pcs reset sequence*/ | 
|  | ge_rst.gmac_0 = NPS_ENET_ENABLE; | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst.value); | 
|  | usleep_range(10, 20); | 
|  | ge_rst.value = 0; | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst.value); | 
|  |  | 
|  | /* Tx fifo reset sequence */ | 
|  | phase_fifo_ctl.rst = NPS_ENET_ENABLE; | 
|  | phase_fifo_ctl.init = NPS_ENET_ENABLE; | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL, | 
|  | phase_fifo_ctl.value); | 
|  | usleep_range(10, 20); | 
|  | phase_fifo_ctl.value = 0; | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL, | 
|  | phase_fifo_ctl.value); | 
|  | } | 
|  |  | 
|  | static void nps_enet_hw_enable_control(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_ge_mac_cfg_0 ge_mac_cfg_0; | 
|  | struct nps_enet_buf_int_enable buf_int_enable; | 
|  | struct nps_enet_ge_mac_cfg_2 *ge_mac_cfg_2 = &priv->ge_mac_cfg_2; | 
|  | struct nps_enet_ge_mac_cfg_3 *ge_mac_cfg_3 = &priv->ge_mac_cfg_3; | 
|  | s32 max_frame_length; | 
|  |  | 
|  | ge_mac_cfg_0.value = 0; | 
|  | buf_int_enable.value = 0; | 
|  | /* Enable Rx and Tx statistics */ | 
|  | ge_mac_cfg_2->stat_en = NPS_ENET_GE_MAC_CFG_2_STAT_EN; | 
|  |  | 
|  | /* Discard packets with different MAC address */ | 
|  | ge_mac_cfg_2->disc_da = NPS_ENET_ENABLE; | 
|  |  | 
|  | /* Discard multicast packets */ | 
|  | ge_mac_cfg_2->disc_mc = NPS_ENET_ENABLE; | 
|  |  | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, | 
|  | ge_mac_cfg_2->value); | 
|  |  | 
|  | /* Discard Packets bigger than max frame length */ | 
|  | max_frame_length = ETH_HLEN + ndev->mtu + ETH_FCS_LEN; | 
|  | if (max_frame_length <= NPS_ENET_MAX_FRAME_LENGTH) | 
|  | ge_mac_cfg_3->max_len = max_frame_length; | 
|  |  | 
|  | /* Enable interrupts */ | 
|  | buf_int_enable.rx_rdy = NPS_ENET_ENABLE; | 
|  | buf_int_enable.tx_done = NPS_ENET_ENABLE; | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, | 
|  | buf_int_enable.value); | 
|  |  | 
|  | /* Write device MAC address to HW */ | 
|  | nps_enet_set_hw_mac_address(ndev); | 
|  |  | 
|  | /* Rx and Tx HW features */ | 
|  | ge_mac_cfg_0.tx_pad_en = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_0.tx_crc_en = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_0.rx_crc_strip = NPS_ENET_ENABLE; | 
|  |  | 
|  | /* IFG configuration */ | 
|  | ge_mac_cfg_0.rx_ifg = NPS_ENET_GE_MAC_CFG_0_RX_IFG; | 
|  | ge_mac_cfg_0.tx_ifg = NPS_ENET_GE_MAC_CFG_0_TX_IFG; | 
|  |  | 
|  | /* preamble configuration */ | 
|  | ge_mac_cfg_0.rx_pr_check_en = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_0.tx_pr_len = NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN; | 
|  |  | 
|  | /* enable flow control frames */ | 
|  | ge_mac_cfg_0.tx_fc_en = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_0.rx_fc_en = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_0.tx_fc_retr = NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR; | 
|  | ge_mac_cfg_3->cf_drop = NPS_ENET_ENABLE; | 
|  |  | 
|  | /* Enable Rx and Tx */ | 
|  | ge_mac_cfg_0.rx_en = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_0.tx_en = NPS_ENET_ENABLE; | 
|  |  | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_3, | 
|  | ge_mac_cfg_3->value); | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, | 
|  | ge_mac_cfg_0.value); | 
|  | } | 
|  |  | 
|  | static void nps_enet_hw_disable_control(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  |  | 
|  | /* Disable interrupts */ | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); | 
|  |  | 
|  | /* Disable Rx and Tx */ | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, 0); | 
|  | } | 
|  |  | 
|  | static void nps_enet_send_frame(struct net_device *ndev, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_tx_ctl tx_ctrl; | 
|  | short length = skb->len; | 
|  | u32 i, len = DIV_ROUND_UP(length, sizeof(u32)); | 
|  | u32 *src = (void *)skb->data; | 
|  | bool src_is_aligned = IS_ALIGNED((unsigned long)src, sizeof(u32)); | 
|  |  | 
|  | tx_ctrl.value = 0; | 
|  | /* In case src is not aligned we need an intermediate buffer */ | 
|  | if (src_is_aligned) | 
|  | for (i = 0; i < len; i++, src++) | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, *src); | 
|  | else /* !src_is_aligned */ | 
|  | for (i = 0; i < len; i++, src++) | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, | 
|  | get_unaligned(src)); | 
|  |  | 
|  | /* Write the length of the Frame */ | 
|  | tx_ctrl.nt = length; | 
|  |  | 
|  | /* Indicate SW is done */ | 
|  | priv->tx_packet_sent = true; | 
|  | tx_ctrl.ct = NPS_ENET_ENABLE; | 
|  |  | 
|  | /* Send Frame */ | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl.value); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_set_mac_address - Set the MAC address for this device. | 
|  | * @ndev:       Pointer to net_device structure. | 
|  | * @p:          6 byte Address to be written as MAC address. | 
|  | * | 
|  | * This function copies the HW address from the sockaddr structure to the | 
|  | * net_device structure and updates the address in HW. | 
|  | * | 
|  | * returns:     -EBUSY if the net device is busy or 0 if the address is set | 
|  | *              successfully. | 
|  | */ | 
|  | static s32 nps_enet_set_mac_address(struct net_device *ndev, void *p) | 
|  | { | 
|  | struct sockaddr *addr = p; | 
|  | s32 res; | 
|  |  | 
|  | if (netif_running(ndev)) | 
|  | return -EBUSY; | 
|  |  | 
|  | res = eth_mac_addr(ndev, p); | 
|  | if (!res) { | 
|  | ether_addr_copy(ndev->dev_addr, addr->sa_data); | 
|  | nps_enet_set_hw_mac_address(ndev); | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_set_rx_mode - Change the receive filtering mode. | 
|  | * @ndev:       Pointer to the network device. | 
|  | * | 
|  | * This function enables/disables promiscuous mode | 
|  | */ | 
|  | static void nps_enet_set_rx_mode(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | struct nps_enet_ge_mac_cfg_2 ge_mac_cfg_2; | 
|  |  | 
|  | ge_mac_cfg_2.value = priv->ge_mac_cfg_2.value; | 
|  |  | 
|  | if (ndev->flags & IFF_PROMISC) { | 
|  | ge_mac_cfg_2.disc_da = NPS_ENET_DISABLE; | 
|  | ge_mac_cfg_2.disc_mc = NPS_ENET_DISABLE; | 
|  | } else { | 
|  | ge_mac_cfg_2.disc_da = NPS_ENET_ENABLE; | 
|  | ge_mac_cfg_2.disc_mc = NPS_ENET_ENABLE; | 
|  | } | 
|  |  | 
|  | nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, ge_mac_cfg_2.value); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_open - Open the network device. | 
|  | * @ndev:       Pointer to the network device. | 
|  | * | 
|  | * returns: 0, on success or non-zero error value on failure. | 
|  | * | 
|  | * This function sets the MAC address, requests and enables an IRQ | 
|  | * for the ENET device and starts the Tx queue. | 
|  | */ | 
|  | static s32 nps_enet_open(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  | s32 err; | 
|  |  | 
|  | /* Reset private variables */ | 
|  | priv->tx_packet_sent = false; | 
|  | priv->ge_mac_cfg_2.value = 0; | 
|  | priv->ge_mac_cfg_3.value = 0; | 
|  |  | 
|  | /* ge_mac_cfg_3 default values */ | 
|  | priv->ge_mac_cfg_3.rx_ifg_th = NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH; | 
|  | priv->ge_mac_cfg_3.max_len = NPS_ENET_GE_MAC_CFG_3_MAX_LEN; | 
|  |  | 
|  | /* Disable HW device */ | 
|  | nps_enet_hw_disable_control(ndev); | 
|  |  | 
|  | /* irq Rx allocation */ | 
|  | err = request_irq(priv->irq, nps_enet_irq_handler, | 
|  | 0, "enet-rx-tx", ndev); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | napi_enable(&priv->napi); | 
|  |  | 
|  | /* Enable HW device */ | 
|  | nps_enet_hw_reset(ndev); | 
|  | nps_enet_hw_enable_control(ndev); | 
|  |  | 
|  | netif_start_queue(ndev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_stop - Close the network device. | 
|  | * @ndev:       Pointer to the network device. | 
|  | * | 
|  | * This function stops the Tx queue, disables interrupts for the ENET device. | 
|  | */ | 
|  | static s32 nps_enet_stop(struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  |  | 
|  | napi_disable(&priv->napi); | 
|  | netif_stop_queue(ndev); | 
|  | nps_enet_hw_disable_control(ndev); | 
|  | free_irq(priv->irq, ndev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * nps_enet_start_xmit - Starts the data transmission. | 
|  | * @skb:        sk_buff pointer that contains data to be Transmitted. | 
|  | * @ndev:       Pointer to net_device structure. | 
|  | * | 
|  | * returns: NETDEV_TX_OK, on success | 
|  | *              NETDEV_TX_BUSY, if any of the descriptors are not free. | 
|  | * | 
|  | * This function is invoked from upper layers to initiate transmission. | 
|  | */ | 
|  | static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *ndev) | 
|  | { | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  |  | 
|  | /* This driver handles one frame at a time  */ | 
|  | netif_stop_queue(ndev); | 
|  |  | 
|  | priv->tx_skb = skb; | 
|  |  | 
|  | nps_enet_send_frame(ndev, skb); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | static void nps_enet_poll_controller(struct net_device *ndev) | 
|  | { | 
|  | disable_irq(ndev->irq); | 
|  | nps_enet_irq_handler(ndev->irq, ndev); | 
|  | enable_irq(ndev->irq); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static const struct net_device_ops nps_netdev_ops = { | 
|  | .ndo_open		= nps_enet_open, | 
|  | .ndo_stop		= nps_enet_stop, | 
|  | .ndo_start_xmit		= nps_enet_start_xmit, | 
|  | .ndo_set_mac_address	= nps_enet_set_mac_address, | 
|  | .ndo_set_rx_mode        = nps_enet_set_rx_mode, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= nps_enet_poll_controller, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static s32 nps_enet_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct net_device *ndev; | 
|  | struct nps_enet_priv *priv; | 
|  | s32 err = 0; | 
|  | const char *mac_addr; | 
|  | struct resource *res_regs; | 
|  |  | 
|  | if (!dev->of_node) | 
|  | return -ENODEV; | 
|  |  | 
|  | ndev = alloc_etherdev(sizeof(struct nps_enet_priv)); | 
|  | if (!ndev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(pdev, ndev); | 
|  | SET_NETDEV_DEV(ndev, dev); | 
|  | priv = netdev_priv(ndev); | 
|  |  | 
|  | /* The EZ NET specific entries in the device structure. */ | 
|  | ndev->netdev_ops = &nps_netdev_ops; | 
|  | ndev->watchdog_timeo = (400 * HZ / 1000); | 
|  | /* FIXME :: no multicast support yet */ | 
|  | ndev->flags &= ~IFF_MULTICAST; | 
|  |  | 
|  | res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | priv->regs_base = devm_ioremap_resource(dev, res_regs); | 
|  | if (IS_ERR(priv->regs_base)) { | 
|  | err = PTR_ERR(priv->regs_base); | 
|  | goto out_netdev; | 
|  | } | 
|  | dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base); | 
|  |  | 
|  | /* set kernel MAC address to dev */ | 
|  | mac_addr = of_get_mac_address(dev->of_node); | 
|  | if (mac_addr) | 
|  | ether_addr_copy(ndev->dev_addr, mac_addr); | 
|  | else | 
|  | eth_hw_addr_random(ndev); | 
|  |  | 
|  | /* Get IRQ number */ | 
|  | priv->irq = platform_get_irq(pdev, 0); | 
|  | if (!priv->irq) { | 
|  | dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n"); | 
|  | err = -ENODEV; | 
|  | goto out_netdev; | 
|  | } | 
|  |  | 
|  | netif_napi_add(ndev, &priv->napi, nps_enet_poll, | 
|  | NPS_ENET_NAPI_POLL_WEIGHT); | 
|  |  | 
|  | /* Register the driver. Should be the last thing in probe */ | 
|  | err = register_netdev(ndev); | 
|  | if (err) { | 
|  | dev_err(dev, "Failed to register ndev for %s, err = 0x%08x\n", | 
|  | ndev->name, (s32)err); | 
|  | goto out_netif_api; | 
|  | } | 
|  |  | 
|  | dev_info(dev, "(rx/tx=%d)\n", priv->irq); | 
|  | return 0; | 
|  |  | 
|  | out_netif_api: | 
|  | netif_napi_del(&priv->napi); | 
|  | out_netdev: | 
|  | if (err) | 
|  | free_netdev(ndev); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static s32 nps_enet_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct net_device *ndev = platform_get_drvdata(pdev); | 
|  | struct nps_enet_priv *priv = netdev_priv(ndev); | 
|  |  | 
|  | unregister_netdev(ndev); | 
|  | free_netdev(ndev); | 
|  | netif_napi_del(&priv->napi); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id nps_enet_dt_ids[] = { | 
|  | { .compatible = "ezchip,nps-mgt-enet" }, | 
|  | { /* Sentinel */ } | 
|  | }; | 
|  |  | 
|  | static struct platform_driver nps_enet_driver = { | 
|  | .probe = nps_enet_probe, | 
|  | .remove = nps_enet_remove, | 
|  | .driver = { | 
|  | .name = DRV_NAME, | 
|  | .of_match_table  = nps_enet_dt_ids, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(nps_enet_driver); | 
|  |  | 
|  | MODULE_AUTHOR("EZchip Semiconductor"); | 
|  | MODULE_LICENSE("GPL v2"); |