| /* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller |
| * |
| * keymap imported from ir-keymaps.c |
| * |
| * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <media/rc-map.h> |
| |
| /* |
| Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card |
| is marked "KS003". The controller is I2C at address 0x30, but does not seem |
| to respond to probes until a read is performed from a valid device. |
| I don't know why... |
| |
| Note: This remote may be of similar or identical design to the |
| Pixelview remote (?). The raw codes and duplicate button codes |
| appear to be the same. |
| |
| Henry Wong <henry@stuffedcow.net> |
| Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com> |
| */ |
| |
| static struct rc_map_table msi_tvanywhere_plus[] = { |
| |
| /* ---- Remote Button Layout ---- |
| |
| POWER SOURCE SCAN MUTE |
| TV/FM 1 2 3 |
| |> 4 5 6 |
| <| 7 8 9 |
| ^^UP 0 + RECALL |
| vvDN RECORD STOP PLAY |
| |
| MINIMIZE ZOOM |
| |
| CH+ |
| VOL- VOL+ |
| CH- |
| |
| SNAPSHOT MTS |
| |
| << FUNC >> RESET |
| */ |
| |
| { 0x01, KEY_1 }, /* 1 */ |
| { 0x0b, KEY_2 }, /* 2 */ |
| { 0x1b, KEY_3 }, /* 3 */ |
| { 0x05, KEY_4 }, /* 4 */ |
| { 0x09, KEY_5 }, /* 5 */ |
| { 0x15, KEY_6 }, /* 6 */ |
| { 0x06, KEY_7 }, /* 7 */ |
| { 0x0a, KEY_8 }, /* 8 */ |
| { 0x12, KEY_9 }, /* 9 */ |
| { 0x02, KEY_0 }, /* 0 */ |
| { 0x10, KEY_KPPLUS }, /* + */ |
| { 0x13, KEY_AGAIN }, /* Recall */ |
| |
| { 0x1e, KEY_POWER }, /* Power */ |
| { 0x07, KEY_TUNER }, /* Source */ |
| { 0x1c, KEY_SEARCH }, /* Scan */ |
| { 0x18, KEY_MUTE }, /* Mute */ |
| |
| { 0x03, KEY_RADIO }, /* TV/FM */ |
| /* The next four keys are duplicates that appear to send the |
| same IR code as Ch+, Ch-, >>, and << . The raw code assigned |
| to them is the actual code + 0x20 - they will never be |
| detected as such unless some way is discovered to distinguish |
| these buttons from those that have the same code. */ |
| { 0x3f, KEY_RIGHT }, /* |> and Ch+ */ |
| { 0x37, KEY_LEFT }, /* <| and Ch- */ |
| { 0x2c, KEY_UP }, /* ^^Up and >> */ |
| { 0x24, KEY_DOWN }, /* vvDn and << */ |
| |
| { 0x00, KEY_RECORD }, /* Record */ |
| { 0x08, KEY_STOP }, /* Stop */ |
| { 0x11, KEY_PLAY }, /* Play */ |
| |
| { 0x0f, KEY_CLOSE }, /* Minimize */ |
| { 0x19, KEY_ZOOM }, /* Zoom */ |
| { 0x1a, KEY_CAMERA }, /* Snapshot */ |
| { 0x0d, KEY_LANGUAGE }, /* MTS */ |
| |
| { 0x14, KEY_VOLUMEDOWN }, /* Vol- */ |
| { 0x16, KEY_VOLUMEUP }, /* Vol+ */ |
| { 0x17, KEY_CHANNELDOWN }, /* Ch- */ |
| { 0x1f, KEY_CHANNELUP }, /* Ch+ */ |
| |
| { 0x04, KEY_REWIND }, /* << */ |
| { 0x0e, KEY_MENU }, /* Function */ |
| { 0x0c, KEY_FASTFORWARD }, /* >> */ |
| { 0x1d, KEY_RESTART }, /* Reset */ |
| }; |
| |
| static struct rc_map_list msi_tvanywhere_plus_map = { |
| .map = { |
| .scan = msi_tvanywhere_plus, |
| .size = ARRAY_SIZE(msi_tvanywhere_plus), |
| .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ |
| .name = RC_MAP_MSI_TVANYWHERE_PLUS, |
| } |
| }; |
| |
| static int __init init_rc_map_msi_tvanywhere_plus(void) |
| { |
| return rc_map_register(&msi_tvanywhere_plus_map); |
| } |
| |
| static void __exit exit_rc_map_msi_tvanywhere_plus(void) |
| { |
| rc_map_unregister(&msi_tvanywhere_plus_map); |
| } |
| |
| module_init(init_rc_map_msi_tvanywhere_plus) |
| module_exit(exit_rc_map_msi_tvanywhere_plus) |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); |