| /* | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/types.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/rtnetlink.h> | 
 |  | 
 | #include <net/mac80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "rate.h" | 
 | #include "sta_info.h" | 
 | #include "debugfs_sta.h" | 
 | #include "mesh.h" | 
 | #include "wme.h" | 
 |  | 
 | /** | 
 |  * DOC: STA information lifetime rules | 
 |  * | 
 |  * STA info structures (&struct sta_info) are managed in a hash table | 
 |  * for faster lookup and a list for iteration. They are managed using | 
 |  * RCU, i.e. access to the list and hash table is protected by RCU. | 
 |  * | 
 |  * Upon allocating a STA info structure with sta_info_alloc(), the caller | 
 |  * owns that structure. It must then insert it into the hash table using | 
 |  * either sta_info_insert() or sta_info_insert_rcu(); only in the latter | 
 |  * case (which acquires an rcu read section but must not be called from | 
 |  * within one) will the pointer still be valid after the call. Note that | 
 |  * the caller may not do much with the STA info before inserting it, in | 
 |  * particular, it may not start any mesh peer link management or add | 
 |  * encryption keys. | 
 |  * | 
 |  * When the insertion fails (sta_info_insert()) returns non-zero), the | 
 |  * structure will have been freed by sta_info_insert()! | 
 |  * | 
 |  * Station entries are added by mac80211 when you establish a link with a | 
 |  * peer. This means different things for the different type of interfaces | 
 |  * we support. For a regular station this mean we add the AP sta when we | 
 |  * receive an association response from the AP. For IBSS this occurs when | 
 |  * get to know about a peer on the same IBSS. For WDS we add the sta for | 
 |  * the peer immediately upon device open. When using AP mode we add stations | 
 |  * for each respective station upon request from userspace through nl80211. | 
 |  * | 
 |  * In order to remove a STA info structure, various sta_info_destroy_*() | 
 |  * calls are available. | 
 |  * | 
 |  * There is no concept of ownership on a STA entry, each structure is | 
 |  * owned by the global hash table/list until it is removed. All users of | 
 |  * the structure need to be RCU protected so that the structure won't be | 
 |  * freed before they are done using it. | 
 |  */ | 
 |  | 
 | /* Caller must hold local->sta_mtx */ | 
 | static int sta_info_hash_del(struct ieee80211_local *local, | 
 | 			     struct sta_info *sta) | 
 | { | 
 | 	struct sta_info *s; | 
 |  | 
 | 	s = rcu_dereference_protected(local->sta_hash[STA_HASH(sta->sta.addr)], | 
 | 				      lockdep_is_held(&local->sta_mtx)); | 
 | 	if (!s) | 
 | 		return -ENOENT; | 
 | 	if (s == sta) { | 
 | 		rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], | 
 | 				   s->hnext); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	while (rcu_access_pointer(s->hnext) && | 
 | 	       rcu_access_pointer(s->hnext) != sta) | 
 | 		s = rcu_dereference_protected(s->hnext, | 
 | 					lockdep_is_held(&local->sta_mtx)); | 
 | 	if (rcu_access_pointer(s->hnext)) { | 
 | 		rcu_assign_pointer(s->hnext, sta->hnext); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -ENOENT; | 
 | } | 
 |  | 
 | /* protected by RCU */ | 
 | struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, | 
 | 			      const u8 *addr) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)], | 
 | 				    lockdep_is_held(&local->sta_mtx)); | 
 | 	while (sta) { | 
 | 		if (sta->sdata == sdata && | 
 | 		    ether_addr_equal(sta->sta.addr, addr)) | 
 | 			break; | 
 | 		sta = rcu_dereference_check(sta->hnext, | 
 | 					    lockdep_is_held(&local->sta_mtx)); | 
 | 	} | 
 | 	return sta; | 
 | } | 
 |  | 
 | /* | 
 |  * Get sta info either from the specified interface | 
 |  * or from one of its vlans | 
 |  */ | 
 | struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata, | 
 | 				  const u8 *addr) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)], | 
 | 				    lockdep_is_held(&local->sta_mtx)); | 
 | 	while (sta) { | 
 | 		if ((sta->sdata == sdata || | 
 | 		     (sta->sdata->bss && sta->sdata->bss == sdata->bss)) && | 
 | 		    ether_addr_equal(sta->sta.addr, addr)) | 
 | 			break; | 
 | 		sta = rcu_dereference_check(sta->hnext, | 
 | 					    lockdep_is_held(&local->sta_mtx)); | 
 | 	} | 
 | 	return sta; | 
 | } | 
 |  | 
 | struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, | 
 | 				     int idx) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	int i = 0; | 
 |  | 
 | 	list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
 | 		if (sdata != sta->sdata) | 
 | 			continue; | 
 | 		if (i < idx) { | 
 | 			++i; | 
 | 			continue; | 
 | 		} | 
 | 		return sta; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * sta_info_free - free STA | 
 |  * | 
 |  * @local: pointer to the global information | 
 |  * @sta: STA info to free | 
 |  * | 
 |  * This function must undo everything done by sta_info_alloc() | 
 |  * that may happen before sta_info_insert(). It may only be | 
 |  * called when sta_info_insert() has not been attempted (and | 
 |  * if that fails, the station is freed anyway.) | 
 |  */ | 
 | void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) | 
 | { | 
 | 	if (sta->rate_ctrl) | 
 | 		rate_control_free_sta(sta); | 
 |  | 
 | 	sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	kfree(sta); | 
 | } | 
 |  | 
 | /* Caller must hold local->sta_mtx */ | 
 | static void sta_info_hash_add(struct ieee80211_local *local, | 
 | 			      struct sta_info *sta) | 
 | { | 
 | 	lockdep_assert_held(&local->sta_mtx); | 
 | 	sta->hnext = local->sta_hash[STA_HASH(sta->sta.addr)]; | 
 | 	rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], sta); | 
 | } | 
 |  | 
 | static void sta_unblock(struct work_struct *wk) | 
 | { | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sta = container_of(wk, struct sta_info, drv_unblock_wk); | 
 |  | 
 | 	if (sta->dead) | 
 | 		return; | 
 |  | 
 | 	if (!test_sta_flag(sta, WLAN_STA_PS_STA)) { | 
 | 		local_bh_disable(); | 
 | 		ieee80211_sta_ps_deliver_wakeup(sta); | 
 | 		local_bh_enable(); | 
 | 	} else if (test_and_clear_sta_flag(sta, WLAN_STA_PSPOLL)) { | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 |  | 
 | 		local_bh_disable(); | 
 | 		ieee80211_sta_ps_deliver_poll_response(sta); | 
 | 		local_bh_enable(); | 
 | 	} else if (test_and_clear_sta_flag(sta, WLAN_STA_UAPSD)) { | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 |  | 
 | 		local_bh_disable(); | 
 | 		ieee80211_sta_ps_deliver_uapsd(sta); | 
 | 		local_bh_enable(); | 
 | 	} else | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | } | 
 |  | 
 | static int sta_prepare_rate_control(struct ieee80211_local *local, | 
 | 				    struct sta_info *sta, gfp_t gfp) | 
 | { | 
 | 	if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) | 
 | 		return 0; | 
 |  | 
 | 	sta->rate_ctrl = local->rate_ctrl; | 
 | 	sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl, | 
 | 						     &sta->sta, gfp); | 
 | 	if (!sta->rate_ctrl_priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, | 
 | 				const u8 *addr, gfp_t gfp) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	struct timespec uptime; | 
 | 	int i; | 
 |  | 
 | 	sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp); | 
 | 	if (!sta) | 
 | 		return NULL; | 
 |  | 
 | 	spin_lock_init(&sta->lock); | 
 | 	INIT_WORK(&sta->drv_unblock_wk, sta_unblock); | 
 | 	INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work); | 
 | 	mutex_init(&sta->ampdu_mlme.mtx); | 
 |  | 
 | 	memcpy(sta->sta.addr, addr, ETH_ALEN); | 
 | 	sta->local = local; | 
 | 	sta->sdata = sdata; | 
 | 	sta->last_rx = jiffies; | 
 |  | 
 | 	sta->sta_state = IEEE80211_STA_NONE; | 
 |  | 
 | 	do_posix_clock_monotonic_gettime(&uptime); | 
 | 	sta->last_connected = uptime.tv_sec; | 
 | 	ewma_init(&sta->avg_signal, 1024, 8); | 
 |  | 
 | 	if (sta_prepare_rate_control(local, sta, gfp)) { | 
 | 		kfree(sta); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < STA_TID_NUM; i++) { | 
 | 		/* | 
 | 		 * timer_to_tid must be initialized with identity mapping | 
 | 		 * to enable session_timer's data differentiation. See | 
 | 		 * sta_rx_agg_session_timer_expired for usage. | 
 | 		 */ | 
 | 		sta->timer_to_tid[i] = i; | 
 | 	} | 
 | 	for (i = 0; i < IEEE80211_NUM_ACS; i++) { | 
 | 		skb_queue_head_init(&sta->ps_tx_buf[i]); | 
 | 		skb_queue_head_init(&sta->tx_filtered[i]); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < NUM_RX_DATA_QUEUES; i++) | 
 | 		sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); | 
 |  | 
 | 	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	sta->plink_state = NL80211_PLINK_LISTEN; | 
 | 	init_timer(&sta->plink_timer); | 
 | #endif | 
 |  | 
 | 	return sta; | 
 | } | 
 |  | 
 | static int sta_info_insert_check(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 |  | 
 | 	/* | 
 | 	 * Can't be a WARN_ON because it can be triggered through a race: | 
 | 	 * something inserts a STA (on one CPU) without holding the RTNL | 
 | 	 * and another CPU turns off the net device. | 
 | 	 */ | 
 | 	if (unlikely(!ieee80211_sdata_running(sdata))) | 
 | 		return -ENETDOWN; | 
 |  | 
 | 	if (WARN_ON(ether_addr_equal(sta->sta.addr, sdata->vif.addr) || | 
 | 		    is_multicast_ether_addr(sta->sta.addr))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta_info_insert_drv_state(struct ieee80211_local *local, | 
 | 				     struct ieee80211_sub_if_data *sdata, | 
 | 				     struct sta_info *sta) | 
 | { | 
 | 	enum ieee80211_sta_state state; | 
 | 	int err = 0; | 
 |  | 
 | 	for (state = IEEE80211_STA_NOTEXIST; state < sta->sta_state; state++) { | 
 | 		err = drv_sta_state(local, sdata, sta, state, state + 1); | 
 | 		if (err) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (!err) { | 
 | 		/* | 
 | 		 * Drivers using legacy sta_add/sta_remove callbacks only | 
 | 		 * get uploaded set to true after sta_add is called. | 
 | 		 */ | 
 | 		if (!local->ops->sta_add) | 
 | 			sta->uploaded = true; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
 | 		sdata_info(sdata, | 
 | 			   "failed to move IBSS STA %pM to state %d (%d) - keeping it anyway\n", | 
 | 			   sta->sta.addr, state + 1, err); | 
 | 		err = 0; | 
 | 	} | 
 |  | 
 | 	/* unwind on error */ | 
 | 	for (; state > IEEE80211_STA_NOTEXIST; state--) | 
 | 		WARN_ON(drv_sta_state(local, sdata, sta, state, state - 1)); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * should be called with sta_mtx locked | 
 |  * this function replaces the mutex lock | 
 |  * with a RCU lock | 
 |  */ | 
 | static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct station_info sinfo; | 
 | 	int err = 0; | 
 |  | 
 | 	lockdep_assert_held(&local->sta_mtx); | 
 |  | 
 | 	/* check if STA exists already */ | 
 | 	if (sta_info_get_bss(sdata, sta->sta.addr)) { | 
 | 		err = -EEXIST; | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | 	/* notify driver */ | 
 | 	err = sta_info_insert_drv_state(local, sdata, sta); | 
 | 	if (err) | 
 | 		goto out_err; | 
 |  | 
 | 	local->num_sta++; | 
 | 	local->sta_generation++; | 
 | 	smp_mb(); | 
 |  | 
 | 	/* make the station visible */ | 
 | 	sta_info_hash_add(local, sta); | 
 |  | 
 | 	list_add_rcu(&sta->list, &local->sta_list); | 
 |  | 
 | 	set_sta_flag(sta, WLAN_STA_INSERTED); | 
 |  | 
 | 	ieee80211_sta_debugfs_add(sta); | 
 | 	rate_control_add_sta_debugfs(sta); | 
 |  | 
 | 	memset(&sinfo, 0, sizeof(sinfo)); | 
 | 	sinfo.filled = 0; | 
 | 	sinfo.generation = local->sta_generation; | 
 | 	cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL); | 
 |  | 
 | 	sta_dbg(sdata, "Inserted STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	/* move reference to rcu-protected */ | 
 | 	rcu_read_lock(); | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		mesh_accept_plinks_update(sdata); | 
 |  | 
 | 	return 0; | 
 |  out_err: | 
 | 	mutex_unlock(&local->sta_mtx); | 
 | 	rcu_read_lock(); | 
 | 	return err; | 
 | } | 
 |  | 
 | int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	int err = 0; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	err = sta_info_insert_check(sta); | 
 | 	if (err) { | 
 | 		rcu_read_lock(); | 
 | 		goto out_free; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	err = sta_info_insert_finish(sta); | 
 | 	if (err) | 
 | 		goto out_free; | 
 |  | 
 | 	return 0; | 
 |  out_free: | 
 | 	BUG_ON(!err); | 
 | 	sta_info_free(local, sta); | 
 | 	return err; | 
 | } | 
 |  | 
 | int sta_info_insert(struct sta_info *sta) | 
 | { | 
 | 	int err = sta_info_insert_rcu(sta); | 
 |  | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static inline void __bss_tim_set(struct ieee80211_if_ap *bss, u16 aid) | 
 | { | 
 | 	/* | 
 | 	 * This format has been mandated by the IEEE specifications, | 
 | 	 * so this line may not be changed to use the __set_bit() format. | 
 | 	 */ | 
 | 	bss->tim[aid / 8] |= (1 << (aid % 8)); | 
 | } | 
 |  | 
 | static inline void __bss_tim_clear(struct ieee80211_if_ap *bss, u16 aid) | 
 | { | 
 | 	/* | 
 | 	 * This format has been mandated by the IEEE specifications, | 
 | 	 * so this line may not be changed to use the __clear_bit() format. | 
 | 	 */ | 
 | 	bss->tim[aid / 8] &= ~(1 << (aid % 8)); | 
 | } | 
 |  | 
 | static unsigned long ieee80211_tids_for_ac(int ac) | 
 | { | 
 | 	/* If we ever support TIDs > 7, this obviously needs to be adjusted */ | 
 | 	switch (ac) { | 
 | 	case IEEE80211_AC_VO: | 
 | 		return BIT(6) | BIT(7); | 
 | 	case IEEE80211_AC_VI: | 
 | 		return BIT(4) | BIT(5); | 
 | 	case IEEE80211_AC_BE: | 
 | 		return BIT(0) | BIT(3); | 
 | 	case IEEE80211_AC_BK: | 
 | 		return BIT(1) | BIT(2); | 
 | 	default: | 
 | 		WARN_ON(1); | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | void sta_info_recalc_tim(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct ieee80211_if_ap *bss = sta->sdata->bss; | 
 | 	unsigned long flags; | 
 | 	bool indicate_tim = false; | 
 | 	u8 ignore_for_tim = sta->sta.uapsd_queues; | 
 | 	int ac; | 
 |  | 
 | 	if (WARN_ON_ONCE(!sta->sdata->bss)) | 
 | 		return; | 
 |  | 
 | 	/* No need to do anything if the driver does all */ | 
 | 	if (local->hw.flags & IEEE80211_HW_AP_LINK_PS) | 
 | 		return; | 
 |  | 
 | 	if (sta->dead) | 
 | 		goto done; | 
 |  | 
 | 	/* | 
 | 	 * If all ACs are delivery-enabled then we should build | 
 | 	 * the TIM bit for all ACs anyway; if only some are then | 
 | 	 * we ignore those and build the TIM bit using only the | 
 | 	 * non-enabled ones. | 
 | 	 */ | 
 | 	if (ignore_for_tim == BIT(IEEE80211_NUM_ACS) - 1) | 
 | 		ignore_for_tim = 0; | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		unsigned long tids; | 
 |  | 
 | 		if (ignore_for_tim & BIT(ac)) | 
 | 			continue; | 
 |  | 
 | 		indicate_tim |= !skb_queue_empty(&sta->tx_filtered[ac]) || | 
 | 				!skb_queue_empty(&sta->ps_tx_buf[ac]); | 
 | 		if (indicate_tim) | 
 | 			break; | 
 |  | 
 | 		tids = ieee80211_tids_for_ac(ac); | 
 |  | 
 | 		indicate_tim |= | 
 | 			sta->driver_buffered_tids & tids; | 
 | 	} | 
 |  | 
 |  done: | 
 | 	spin_lock_irqsave(&local->tim_lock, flags); | 
 |  | 
 | 	if (indicate_tim) | 
 | 		__bss_tim_set(bss, sta->sta.aid); | 
 | 	else | 
 | 		__bss_tim_clear(bss, sta->sta.aid); | 
 |  | 
 | 	if (local->ops->set_tim) { | 
 | 		local->tim_in_locked_section = true; | 
 | 		drv_set_tim(local, &sta->sta, indicate_tim); | 
 | 		local->tim_in_locked_section = false; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&local->tim_lock, flags); | 
 | } | 
 |  | 
 | static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_tx_info *info; | 
 | 	int timeout; | 
 |  | 
 | 	if (!skb) | 
 | 		return false; | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */ | 
 | 	timeout = (sta->listen_interval * | 
 | 		   sta->sdata->vif.bss_conf.beacon_int * | 
 | 		   32 / 15625) * HZ; | 
 | 	if (timeout < STA_TX_BUFFER_EXPIRE) | 
 | 		timeout = STA_TX_BUFFER_EXPIRE; | 
 | 	return time_after(jiffies, info->control.jiffies + timeout); | 
 | } | 
 |  | 
 |  | 
 | static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, | 
 | 						struct sta_info *sta, int ac) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	/* | 
 | 	 * First check for frames that should expire on the filtered | 
 | 	 * queue. Frames here were rejected by the driver and are on | 
 | 	 * a separate queue to avoid reordering with normal PS-buffered | 
 | 	 * frames. They also aren't accounted for right now in the | 
 | 	 * total_ps_buffered counter. | 
 | 	 */ | 
 | 	for (;;) { | 
 | 		spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); | 
 | 		skb = skb_peek(&sta->tx_filtered[ac]); | 
 | 		if (sta_info_buffer_expired(sta, skb)) | 
 | 			skb = __skb_dequeue(&sta->tx_filtered[ac]); | 
 | 		else | 
 | 			skb = NULL; | 
 | 		spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); | 
 |  | 
 | 		/* | 
 | 		 * Frames are queued in order, so if this one | 
 | 		 * hasn't expired yet we can stop testing. If | 
 | 		 * we actually reached the end of the queue we | 
 | 		 * also need to stop, of course. | 
 | 		 */ | 
 | 		if (!skb) | 
 | 			break; | 
 | 		dev_kfree_skb(skb); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Now also check the normal PS-buffered queue, this will | 
 | 	 * only find something if the filtered queue was emptied | 
 | 	 * since the filtered frames are all before the normal PS | 
 | 	 * buffered frames. | 
 | 	 */ | 
 | 	for (;;) { | 
 | 		spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); | 
 | 		skb = skb_peek(&sta->ps_tx_buf[ac]); | 
 | 		if (sta_info_buffer_expired(sta, skb)) | 
 | 			skb = __skb_dequeue(&sta->ps_tx_buf[ac]); | 
 | 		else | 
 | 			skb = NULL; | 
 | 		spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); | 
 |  | 
 | 		/* | 
 | 		 * frames are queued in order, so if this one | 
 | 		 * hasn't expired yet (or we reached the end of | 
 | 		 * the queue) we can stop testing | 
 | 		 */ | 
 | 		if (!skb) | 
 | 			break; | 
 |  | 
 | 		local->total_ps_buffered--; | 
 | 		ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", | 
 | 		       sta->sta.addr); | 
 | 		dev_kfree_skb(skb); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Finally, recalculate the TIM bit for this station -- it might | 
 | 	 * now be clear because the station was too slow to retrieve its | 
 | 	 * frames. | 
 | 	 */ | 
 | 	sta_info_recalc_tim(sta); | 
 |  | 
 | 	/* | 
 | 	 * Return whether there are any frames still buffered, this is | 
 | 	 * used to check whether the cleanup timer still needs to run, | 
 | 	 * if there are no frames we don't need to rearm the timer. | 
 | 	 */ | 
 | 	return !(skb_queue_empty(&sta->ps_tx_buf[ac]) && | 
 | 		 skb_queue_empty(&sta->tx_filtered[ac])); | 
 | } | 
 |  | 
 | static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, | 
 | 					     struct sta_info *sta) | 
 | { | 
 | 	bool have_buffered = false; | 
 | 	int ac; | 
 |  | 
 | 	/* This is only necessary for stations on BSS interfaces */ | 
 | 	if (!sta->sdata->bss) | 
 | 		return false; | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) | 
 | 		have_buffered |= | 
 | 			sta_info_cleanup_expire_buffered_ac(local, sta, ac); | 
 |  | 
 | 	return have_buffered; | 
 | } | 
 |  | 
 | int __must_check __sta_info_destroy(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_local *local; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	int ret, i, ac; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	if (!sta) | 
 | 		return -ENOENT; | 
 |  | 
 | 	local = sta->local; | 
 | 	sdata = sta->sdata; | 
 |  | 
 | 	lockdep_assert_held(&local->sta_mtx); | 
 |  | 
 | 	/* | 
 | 	 * Before removing the station from the driver and | 
 | 	 * rate control, it might still start new aggregation | 
 | 	 * sessions -- block that to make sure the tear-down | 
 | 	 * will be sufficient. | 
 | 	 */ | 
 | 	set_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
 | 	ieee80211_sta_tear_down_BA_sessions(sta, true); | 
 |  | 
 | 	ret = sta_info_hash_del(local, sta); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	list_del_rcu(&sta->list); | 
 |  | 
 | 	mutex_lock(&local->key_mtx); | 
 | 	for (i = 0; i < NUM_DEFAULT_KEYS; i++) | 
 | 		__ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i])); | 
 | 	if (sta->ptk) | 
 | 		__ieee80211_key_free(key_mtx_dereference(local, sta->ptk)); | 
 | 	mutex_unlock(&local->key_mtx); | 
 |  | 
 | 	sta->dead = true; | 
 |  | 
 | 	local->num_sta--; | 
 | 	local->sta_generation++; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 		RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); | 
 |  | 
 | 	while (sta->sta_state > IEEE80211_STA_NONE) { | 
 | 		ret = sta_info_move_state(sta, sta->sta_state - 1); | 
 | 		if (ret) { | 
 | 			WARN_ON_ONCE(1); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (sta->uploaded) { | 
 | 		ret = drv_sta_state(local, sdata, sta, IEEE80211_STA_NONE, | 
 | 				    IEEE80211_STA_NOTEXIST); | 
 | 		WARN_ON_ONCE(ret != 0); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * At this point, after we wait for an RCU grace period, | 
 | 	 * neither mac80211 nor the driver can reference this | 
 | 	 * sta struct any more except by still existing timers | 
 | 	 * associated with this station that we clean up below. | 
 | 	 */ | 
 | 	synchronize_rcu(); | 
 |  | 
 | 	if (test_sta_flag(sta, WLAN_STA_PS_STA)) { | 
 | 		BUG_ON(!sdata->bss); | 
 |  | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_STA); | 
 |  | 
 | 		atomic_dec(&sdata->bss->num_sta_ps); | 
 | 		sta_info_recalc_tim(sta); | 
 | 	} | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]); | 
 | 		__skb_queue_purge(&sta->ps_tx_buf[ac]); | 
 | 		__skb_queue_purge(&sta->tx_filtered[ac]); | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		mesh_accept_plinks_update(sdata); | 
 | #endif | 
 |  | 
 | 	sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	cancel_work_sync(&sta->drv_unblock_wk); | 
 |  | 
 | 	cfg80211_del_sta(sdata->dev, sta->sta.addr, GFP_KERNEL); | 
 |  | 
 | 	rate_control_remove_sta_debugfs(sta); | 
 | 	ieee80211_sta_debugfs_remove(sta); | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	if (ieee80211_vif_is_mesh(&sta->sdata->vif)) { | 
 | 		mesh_plink_deactivate(sta); | 
 | 		del_timer_sync(&sta->plink_timer); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	/* | 
 | 	 * Destroy aggregation state here. It would be nice to wait for the | 
 | 	 * driver to finish aggregation stop and then clean up, but for now | 
 | 	 * drivers have to handle aggregation stop being requested, followed | 
 | 	 * directly by station destruction. | 
 | 	 */ | 
 | 	for (i = 0; i < STA_TID_NUM; i++) { | 
 | 		tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]); | 
 | 		if (!tid_tx) | 
 | 			continue; | 
 | 		__skb_queue_purge(&tid_tx->pending); | 
 | 		kfree(tid_tx); | 
 | 	} | 
 |  | 
 | 	sta_info_free(local, sta); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr) | 
 | { | 
 | 	struct sta_info *sta; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&sdata->local->sta_mtx); | 
 | 	sta = sta_info_get(sdata, addr); | 
 | 	ret = __sta_info_destroy(sta); | 
 | 	mutex_unlock(&sdata->local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata, | 
 | 			      const u8 *addr) | 
 | { | 
 | 	struct sta_info *sta; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&sdata->local->sta_mtx); | 
 | 	sta = sta_info_get_bss(sdata, addr); | 
 | 	ret = __sta_info_destroy(sta); | 
 | 	mutex_unlock(&sdata->local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void sta_info_cleanup(unsigned long data) | 
 | { | 
 | 	struct ieee80211_local *local = (struct ieee80211_local *) data; | 
 | 	struct sta_info *sta; | 
 | 	bool timer_needed = false; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	list_for_each_entry_rcu(sta, &local->sta_list, list) | 
 | 		if (sta_info_cleanup_expire_buffered(local, sta)) | 
 | 			timer_needed = true; | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (local->quiescing) | 
 | 		return; | 
 |  | 
 | 	if (!timer_needed) | 
 | 		return; | 
 |  | 
 | 	mod_timer(&local->sta_cleanup, | 
 | 		  round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL)); | 
 | } | 
 |  | 
 | void sta_info_init(struct ieee80211_local *local) | 
 | { | 
 | 	spin_lock_init(&local->tim_lock); | 
 | 	mutex_init(&local->sta_mtx); | 
 | 	INIT_LIST_HEAD(&local->sta_list); | 
 |  | 
 | 	setup_timer(&local->sta_cleanup, sta_info_cleanup, | 
 | 		    (unsigned long)local); | 
 | } | 
 |  | 
 | void sta_info_stop(struct ieee80211_local *local) | 
 | { | 
 | 	del_timer(&local->sta_cleanup); | 
 | 	sta_info_flush(local, NULL); | 
 | } | 
 |  | 
 | /** | 
 |  * sta_info_flush - flush matching STA entries from the STA table | 
 |  * | 
 |  * Returns the number of removed STA entries. | 
 |  * | 
 |  * @local: local interface data | 
 |  * @sdata: matching rule for the net device (sta->dev) or %NULL to match all STAs | 
 |  */ | 
 | int sta_info_flush(struct ieee80211_local *local, | 
 | 		   struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct sta_info *sta, *tmp; | 
 | 	int ret = 0; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 | 	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { | 
 | 		if (!sdata || sdata == sta->sdata) { | 
 | 			WARN_ON(__sta_info_destroy(sta)); | 
 | 			ret++; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, | 
 | 			  unsigned long exp_time) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta, *tmp; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { | 
 | 		if (sdata != sta->sdata) | 
 | 			continue; | 
 |  | 
 | 		if (time_after(jiffies, sta->last_rx + exp_time)) { | 
 | 			ibss_dbg(sdata, "expiring inactive STA %pM\n", | 
 | 				 sta->sta.addr); | 
 | 			WARN_ON(__sta_info_destroy(sta)); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&local->sta_mtx); | 
 | } | 
 |  | 
 | struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, | 
 | 					       const u8 *addr, | 
 | 					       const u8 *localaddr) | 
 | { | 
 | 	struct sta_info *sta, *nxt; | 
 |  | 
 | 	/* | 
 | 	 * Just return a random station if localaddr is NULL | 
 | 	 * ... first in list. | 
 | 	 */ | 
 | 	for_each_sta_info(hw_to_local(hw), addr, sta, nxt) { | 
 | 		if (localaddr && | 
 | 		    !ether_addr_equal(sta->sdata->vif.addr, localaddr)) | 
 | 			continue; | 
 | 		if (!sta->uploaded) | 
 | 			return NULL; | 
 | 		return &sta->sta; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_ifaddr); | 
 |  | 
 | struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, | 
 | 					 const u8 *addr) | 
 | { | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	if (!vif) | 
 | 		return NULL; | 
 |  | 
 | 	sta = sta_info_get_bss(vif_to_sdata(vif), addr); | 
 | 	if (!sta) | 
 | 		return NULL; | 
 |  | 
 | 	if (!sta->uploaded) | 
 | 		return NULL; | 
 |  | 
 | 	return &sta->sta; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_find_sta); | 
 |  | 
 | static void clear_sta_ps_flags(void *_sta) | 
 | { | 
 | 	struct sta_info *sta = _sta; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 |  | 
 | 	clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 	if (test_and_clear_sta_flag(sta, WLAN_STA_PS_STA)) | 
 | 		atomic_dec(&sdata->bss->num_sta_ps); | 
 | } | 
 |  | 
 | /* powersave support code */ | 
 | void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff_head pending; | 
 | 	int filtered = 0, buffered = 0, ac; | 
 |  | 
 | 	clear_sta_flag(sta, WLAN_STA_SP); | 
 |  | 
 | 	BUILD_BUG_ON(BITS_TO_LONGS(STA_TID_NUM) > 1); | 
 | 	sta->driver_buffered_tids = 0; | 
 |  | 
 | 	if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS)) | 
 | 		drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta); | 
 |  | 
 | 	skb_queue_head_init(&pending); | 
 |  | 
 | 	/* Send all buffered frames to the station */ | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		int count = skb_queue_len(&pending), tmp; | 
 |  | 
 | 		skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending); | 
 | 		tmp = skb_queue_len(&pending); | 
 | 		filtered += tmp - count; | 
 | 		count = tmp; | 
 |  | 
 | 		skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending); | 
 | 		tmp = skb_queue_len(&pending); | 
 | 		buffered += tmp - count; | 
 | 	} | 
 |  | 
 | 	ieee80211_add_pending_skbs_fn(local, &pending, clear_sta_ps_flags, sta); | 
 |  | 
 | 	local->total_ps_buffered -= buffered; | 
 |  | 
 | 	sta_info_recalc_tim(sta); | 
 |  | 
 | 	ps_dbg(sdata, | 
 | 	       "STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n", | 
 | 	       sta->sta.addr, sta->sta.aid, filtered, buffered); | 
 | } | 
 |  | 
 | static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, | 
 | 					 struct sta_info *sta, int tid, | 
 | 					 enum ieee80211_frame_release_type reason) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_qos_hdr *nullfunc; | 
 | 	struct sk_buff *skb; | 
 | 	int size = sizeof(*nullfunc); | 
 | 	__le16 fc; | 
 | 	bool qos = test_sta_flag(sta, WLAN_STA_WME); | 
 | 	struct ieee80211_tx_info *info; | 
 |  | 
 | 	if (qos) { | 
 | 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 				 IEEE80211_STYPE_QOS_NULLFUNC | | 
 | 				 IEEE80211_FCTL_FROMDS); | 
 | 	} else { | 
 | 		size -= 2; | 
 | 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 				 IEEE80211_STYPE_NULLFUNC | | 
 | 				 IEEE80211_FCTL_FROMDS); | 
 | 	} | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	nullfunc = (void *) skb_put(skb, size); | 
 | 	nullfunc->frame_control = fc; | 
 | 	nullfunc->duration_id = 0; | 
 | 	memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); | 
 |  | 
 | 	skb->priority = tid; | 
 | 	skb_set_queue_mapping(skb, ieee802_1d_to_ac[tid]); | 
 | 	if (qos) { | 
 | 		nullfunc->qos_ctrl = cpu_to_le16(tid); | 
 |  | 
 | 		if (reason == IEEE80211_FRAME_RELEASE_UAPSD) | 
 | 			nullfunc->qos_ctrl |= | 
 | 				cpu_to_le16(IEEE80211_QOS_CTL_EOSP); | 
 | 	} | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	/* | 
 | 	 * Tell TX path to send this frame even though the | 
 | 	 * STA may still remain is PS mode after this frame | 
 | 	 * exchange. Also set EOSP to indicate this packet | 
 | 	 * ends the poll/service period. | 
 | 	 */ | 
 | 	info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | | 
 | 		       IEEE80211_TX_STATUS_EOSP | | 
 | 		       IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 |  | 
 | 	drv_allow_buffered_frames(local, sta, BIT(tid), 1, reason, false); | 
 |  | 
 | 	ieee80211_xmit(sdata, skb); | 
 | } | 
 |  | 
 | static void | 
 | ieee80211_sta_ps_deliver_response(struct sta_info *sta, | 
 | 				  int n_frames, u8 ignored_acs, | 
 | 				  enum ieee80211_frame_release_type reason) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	bool found = false; | 
 | 	bool more_data = false; | 
 | 	int ac; | 
 | 	unsigned long driver_release_tids = 0; | 
 | 	struct sk_buff_head frames; | 
 |  | 
 | 	/* Service or PS-Poll period starts */ | 
 | 	set_sta_flag(sta, WLAN_STA_SP); | 
 |  | 
 | 	__skb_queue_head_init(&frames); | 
 |  | 
 | 	/* | 
 | 	 * Get response frame(s) and more data bit for it. | 
 | 	 */ | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		unsigned long tids; | 
 |  | 
 | 		if (ignored_acs & BIT(ac)) | 
 | 			continue; | 
 |  | 
 | 		tids = ieee80211_tids_for_ac(ac); | 
 |  | 
 | 		if (!found) { | 
 | 			driver_release_tids = sta->driver_buffered_tids & tids; | 
 | 			if (driver_release_tids) { | 
 | 				found = true; | 
 | 			} else { | 
 | 				struct sk_buff *skb; | 
 |  | 
 | 				while (n_frames > 0) { | 
 | 					skb = skb_dequeue(&sta->tx_filtered[ac]); | 
 | 					if (!skb) { | 
 | 						skb = skb_dequeue( | 
 | 							&sta->ps_tx_buf[ac]); | 
 | 						if (skb) | 
 | 							local->total_ps_buffered--; | 
 | 					} | 
 | 					if (!skb) | 
 | 						break; | 
 | 					n_frames--; | 
 | 					found = true; | 
 | 					__skb_queue_tail(&frames, skb); | 
 | 				} | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * If the driver has data on more than one TID then | 
 | 			 * certainly there's more data if we release just a | 
 | 			 * single frame now (from a single TID). | 
 | 			 */ | 
 | 			if (reason == IEEE80211_FRAME_RELEASE_PSPOLL && | 
 | 			    hweight16(driver_release_tids) > 1) { | 
 | 				more_data = true; | 
 | 				driver_release_tids = | 
 | 					BIT(ffs(driver_release_tids) - 1); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (!skb_queue_empty(&sta->tx_filtered[ac]) || | 
 | 		    !skb_queue_empty(&sta->ps_tx_buf[ac])) { | 
 | 			more_data = true; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!found) { | 
 | 		int tid; | 
 |  | 
 | 		/* | 
 | 		 * For PS-Poll, this can only happen due to a race condition | 
 | 		 * when we set the TIM bit and the station notices it, but | 
 | 		 * before it can poll for the frame we expire it. | 
 | 		 * | 
 | 		 * For uAPSD, this is said in the standard (11.2.1.5 h): | 
 | 		 *	At each unscheduled SP for a non-AP STA, the AP shall | 
 | 		 *	attempt to transmit at least one MSDU or MMPDU, but no | 
 | 		 *	more than the value specified in the Max SP Length field | 
 | 		 *	in the QoS Capability element from delivery-enabled ACs, | 
 | 		 *	that are destined for the non-AP STA. | 
 | 		 * | 
 | 		 * Since we have no other MSDU/MMPDU, transmit a QoS null frame. | 
 | 		 */ | 
 |  | 
 | 		/* This will evaluate to 1, 3, 5 or 7. */ | 
 | 		tid = 7 - ((ffs(~ignored_acs) - 1) << 1); | 
 |  | 
 | 		ieee80211_send_null_response(sdata, sta, tid, reason); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!driver_release_tids) { | 
 | 		struct sk_buff_head pending; | 
 | 		struct sk_buff *skb; | 
 | 		int num = 0; | 
 | 		u16 tids = 0; | 
 |  | 
 | 		skb_queue_head_init(&pending); | 
 |  | 
 | 		while ((skb = __skb_dequeue(&frames))) { | 
 | 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 			struct ieee80211_hdr *hdr = (void *) skb->data; | 
 | 			u8 *qoshdr = NULL; | 
 |  | 
 | 			num++; | 
 |  | 
 | 			/* | 
 | 			 * Tell TX path to send this frame even though the | 
 | 			 * STA may still remain is PS mode after this frame | 
 | 			 * exchange. | 
 | 			 */ | 
 | 			info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; | 
 |  | 
 | 			/* | 
 | 			 * Use MoreData flag to indicate whether there are | 
 | 			 * more buffered frames for this STA | 
 | 			 */ | 
 | 			if (more_data || !skb_queue_empty(&frames)) | 
 | 				hdr->frame_control |= | 
 | 					cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
 | 			else | 
 | 				hdr->frame_control &= | 
 | 					cpu_to_le16(~IEEE80211_FCTL_MOREDATA); | 
 |  | 
 | 			if (ieee80211_is_data_qos(hdr->frame_control) || | 
 | 			    ieee80211_is_qos_nullfunc(hdr->frame_control)) | 
 | 				qoshdr = ieee80211_get_qos_ctl(hdr); | 
 |  | 
 | 			/* end service period after last frame */ | 
 | 			if (skb_queue_empty(&frames)) { | 
 | 				if (reason == IEEE80211_FRAME_RELEASE_UAPSD && | 
 | 				    qoshdr) | 
 | 					*qoshdr |= IEEE80211_QOS_CTL_EOSP; | 
 |  | 
 | 				info->flags |= IEEE80211_TX_STATUS_EOSP | | 
 | 					       IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 | 			} | 
 |  | 
 | 			if (qoshdr) | 
 | 				tids |= BIT(*qoshdr & IEEE80211_QOS_CTL_TID_MASK); | 
 | 			else | 
 | 				tids |= BIT(0); | 
 |  | 
 | 			__skb_queue_tail(&pending, skb); | 
 | 		} | 
 |  | 
 | 		drv_allow_buffered_frames(local, sta, tids, num, | 
 | 					  reason, more_data); | 
 |  | 
 | 		ieee80211_add_pending_skbs(local, &pending); | 
 |  | 
 | 		sta_info_recalc_tim(sta); | 
 | 	} else { | 
 | 		/* | 
 | 		 * We need to release a frame that is buffered somewhere in the | 
 | 		 * driver ... it'll have to handle that. | 
 | 		 * Note that, as per the comment above, it'll also have to see | 
 | 		 * if there is more than just one frame on the specific TID that | 
 | 		 * we're releasing from, and it needs to set the more-data bit | 
 | 		 * accordingly if we tell it that there's no more data. If we do | 
 | 		 * tell it there's more data, then of course the more-data bit | 
 | 		 * needs to be set anyway. | 
 | 		 */ | 
 | 		drv_release_buffered_frames(local, sta, driver_release_tids, | 
 | 					    n_frames, reason, more_data); | 
 |  | 
 | 		/* | 
 | 		 * Note that we don't recalculate the TIM bit here as it would | 
 | 		 * most likely have no effect at all unless the driver told us | 
 | 		 * that the TID became empty before returning here from the | 
 | 		 * release function. | 
 | 		 * Either way, however, when the driver tells us that the TID | 
 | 		 * became empty we'll do the TIM recalculation. | 
 | 		 */ | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta) | 
 | { | 
 | 	u8 ignore_for_response = sta->sta.uapsd_queues; | 
 |  | 
 | 	/* | 
 | 	 * If all ACs are delivery-enabled then we should reply | 
 | 	 * from any of them, if only some are enabled we reply | 
 | 	 * only from the non-enabled ones. | 
 | 	 */ | 
 | 	if (ignore_for_response == BIT(IEEE80211_NUM_ACS) - 1) | 
 | 		ignore_for_response = 0; | 
 |  | 
 | 	ieee80211_sta_ps_deliver_response(sta, 1, ignore_for_response, | 
 | 					  IEEE80211_FRAME_RELEASE_PSPOLL); | 
 | } | 
 |  | 
 | void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta) | 
 | { | 
 | 	int n_frames = sta->sta.max_sp; | 
 | 	u8 delivery_enabled = sta->sta.uapsd_queues; | 
 |  | 
 | 	/* | 
 | 	 * If we ever grow support for TSPEC this might happen if | 
 | 	 * the TSPEC update from hostapd comes in between a trigger | 
 | 	 * frame setting WLAN_STA_UAPSD in the RX path and this | 
 | 	 * actually getting called. | 
 | 	 */ | 
 | 	if (!delivery_enabled) | 
 | 		return; | 
 |  | 
 | 	switch (sta->sta.max_sp) { | 
 | 	case 1: | 
 | 		n_frames = 2; | 
 | 		break; | 
 | 	case 2: | 
 | 		n_frames = 4; | 
 | 		break; | 
 | 	case 3: | 
 | 		n_frames = 6; | 
 | 		break; | 
 | 	case 0: | 
 | 		/* XXX: what is a good value? */ | 
 | 		n_frames = 8; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	ieee80211_sta_ps_deliver_response(sta, n_frames, ~delivery_enabled, | 
 | 					  IEEE80211_FRAME_RELEASE_UAPSD); | 
 | } | 
 |  | 
 | void ieee80211_sta_block_awake(struct ieee80211_hw *hw, | 
 | 			       struct ieee80211_sta *pubsta, bool block) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 |  | 
 | 	trace_api_sta_block_awake(sta->local, pubsta, block); | 
 |  | 
 | 	if (block) | 
 | 		set_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 	else if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) | 
 | 		ieee80211_queue_work(hw, &sta->drv_unblock_wk); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_block_awake); | 
 |  | 
 | void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct skb_eosp_msg_data *data; | 
 |  | 
 | 	trace_api_eosp(local, pubsta); | 
 |  | 
 | 	skb = alloc_skb(0, GFP_ATOMIC); | 
 | 	if (!skb) { | 
 | 		/* too bad ... but race is better than loss */ | 
 | 		clear_sta_flag(sta, WLAN_STA_SP); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	data = (void *)skb->cb; | 
 | 	memcpy(data->sta, pubsta->addr, ETH_ALEN); | 
 | 	memcpy(data->iface, sta->sdata->vif.addr, ETH_ALEN); | 
 | 	skb->pkt_type = IEEE80211_EOSP_MSG; | 
 | 	skb_queue_tail(&local->skb_queue, skb); | 
 | 	tasklet_schedule(&local->tasklet); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_eosp_irqsafe); | 
 |  | 
 | void ieee80211_sta_set_buffered(struct ieee80211_sta *pubsta, | 
 | 				u8 tid, bool buffered) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 |  | 
 | 	if (WARN_ON(tid >= STA_TID_NUM)) | 
 | 		return; | 
 |  | 
 | 	if (buffered) | 
 | 		set_bit(tid, &sta->driver_buffered_tids); | 
 | 	else | 
 | 		clear_bit(tid, &sta->driver_buffered_tids); | 
 |  | 
 | 	sta_info_recalc_tim(sta); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_set_buffered); | 
 |  | 
 | int sta_info_move_state(struct sta_info *sta, | 
 | 			enum ieee80211_sta_state new_state) | 
 | { | 
 | 	might_sleep(); | 
 |  | 
 | 	if (sta->sta_state == new_state) | 
 | 		return 0; | 
 |  | 
 | 	/* check allowed transitions first */ | 
 |  | 
 | 	switch (new_state) { | 
 | 	case IEEE80211_STA_NONE: | 
 | 		if (sta->sta_state != IEEE80211_STA_AUTH) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTH: | 
 | 		if (sta->sta_state != IEEE80211_STA_NONE && | 
 | 		    sta->sta_state != IEEE80211_STA_ASSOC) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case IEEE80211_STA_ASSOC: | 
 | 		if (sta->sta_state != IEEE80211_STA_AUTH && | 
 | 		    sta->sta_state != IEEE80211_STA_AUTHORIZED) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTHORIZED: | 
 | 		if (sta->sta_state != IEEE80211_STA_ASSOC) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	default: | 
 | 		WARN(1, "invalid state %d", new_state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	sta_dbg(sta->sdata, "moving STA %pM to state %d\n", | 
 | 		sta->sta.addr, new_state); | 
 |  | 
 | 	/* | 
 | 	 * notify the driver before the actual changes so it can | 
 | 	 * fail the transition | 
 | 	 */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_INSERTED)) { | 
 | 		int err = drv_sta_state(sta->local, sta->sdata, sta, | 
 | 					sta->sta_state, new_state); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* reflect the change in all state variables */ | 
 |  | 
 | 	switch (new_state) { | 
 | 	case IEEE80211_STA_NONE: | 
 | 		if (sta->sta_state == IEEE80211_STA_AUTH) | 
 | 			clear_bit(WLAN_STA_AUTH, &sta->_flags); | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTH: | 
 | 		if (sta->sta_state == IEEE80211_STA_NONE) | 
 | 			set_bit(WLAN_STA_AUTH, &sta->_flags); | 
 | 		else if (sta->sta_state == IEEE80211_STA_ASSOC) | 
 | 			clear_bit(WLAN_STA_ASSOC, &sta->_flags); | 
 | 		break; | 
 | 	case IEEE80211_STA_ASSOC: | 
 | 		if (sta->sta_state == IEEE80211_STA_AUTH) { | 
 | 			set_bit(WLAN_STA_ASSOC, &sta->_flags); | 
 | 		} else if (sta->sta_state == IEEE80211_STA_AUTHORIZED) { | 
 | 			if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 			    (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 			     !sta->sdata->u.vlan.sta)) | 
 | 				atomic_dec(&sta->sdata->bss->num_mcast_sta); | 
 | 			clear_bit(WLAN_STA_AUTHORIZED, &sta->_flags); | 
 | 		} | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTHORIZED: | 
 | 		if (sta->sta_state == IEEE80211_STA_ASSOC) { | 
 | 			if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 			    (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 			     !sta->sdata->u.vlan.sta)) | 
 | 				atomic_inc(&sta->sdata->bss->num_mcast_sta); | 
 | 			set_bit(WLAN_STA_AUTHORIZED, &sta->_flags); | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	sta->sta_state = new_state; | 
 |  | 
 | 	return 0; | 
 | } |