| /* New Hydra driver using generic 8390 core */ |
| /* Based on old hydra driver by Topi Kanerva (topi@susanna.oulu.fi) */ |
| |
| /* This file is subject to the terms and conditions of the GNU General */ |
| /* Public License. See the file COPYING in the main directory of the */ |
| /* Linux distribution for more details. */ |
| |
| /* Peter De Schrijver (p2@mind.be) */ |
| /* Oldenburg 2000 */ |
| |
| /* The Amiganet is a Zorro-II board made by Hydra Systems. It contains a */ |
| /* NS8390 NIC (network interface controller) clone, 16 or 64K on-board RAM */ |
| /* and 10BASE-2 (thin coax) and AUI connectors. */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/amigaints.h> |
| #include <asm/amigahw.h> |
| #include <linux/zorro.h> |
| |
| #define EI_SHIFT(x) (ei_local->reg_offset[x]) |
| #define ei_inb(port) in_8(port) |
| #define ei_outb(val,port) out_8(port,val) |
| #define ei_inb_p(port) in_8(port) |
| #define ei_outb_p(val,port) out_8(port,val) |
| |
| static const char version[] = |
| "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; |
| |
| #include "lib8390.c" |
| |
| #define NE_EN0_DCFG (0x0e*2) |
| |
| #define NESM_START_PG 0x0 /* First page of TX buffer */ |
| #define NESM_STOP_PG 0x40 /* Last page +1 of RX ring */ |
| |
| #define HYDRA_NIC_BASE 0xffe1 |
| #define HYDRA_ADDRPROM 0xffc0 |
| #define HYDRA_VERSION "v3.0alpha" |
| |
| #define WORDSWAP(a) ((((a)>>8)&0xff) | ((a)<<8)) |
| |
| |
| static int hydra_init_one(struct zorro_dev *z, |
| const struct zorro_device_id *ent); |
| static int hydra_init(struct zorro_dev *z); |
| static int hydra_open(struct net_device *dev); |
| static int hydra_close(struct net_device *dev); |
| static void hydra_reset_8390(struct net_device *dev); |
| static void hydra_get_8390_hdr(struct net_device *dev, |
| struct e8390_pkt_hdr *hdr, int ring_page); |
| static void hydra_block_input(struct net_device *dev, int count, |
| struct sk_buff *skb, int ring_offset); |
| static void hydra_block_output(struct net_device *dev, int count, |
| const unsigned char *buf, int start_page); |
| static void hydra_remove_one(struct zorro_dev *z); |
| static u32 hydra_msg_enable; |
| |
| static struct zorro_device_id hydra_zorro_tbl[] = { |
| { ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET }, |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(zorro, hydra_zorro_tbl); |
| |
| static struct zorro_driver hydra_driver = { |
| .name = "hydra", |
| .id_table = hydra_zorro_tbl, |
| .probe = hydra_init_one, |
| .remove = hydra_remove_one, |
| }; |
| |
| static int hydra_init_one(struct zorro_dev *z, |
| const struct zorro_device_id *ent) |
| { |
| int err; |
| |
| if (!request_mem_region(z->resource.start, 0x10000, "Hydra")) |
| return -EBUSY; |
| if ((err = hydra_init(z))) { |
| release_mem_region(z->resource.start, 0x10000); |
| return -EBUSY; |
| } |
| return 0; |
| } |
| |
| static const struct net_device_ops hydra_netdev_ops = { |
| .ndo_open = hydra_open, |
| .ndo_stop = hydra_close, |
| |
| .ndo_start_xmit = __ei_start_xmit, |
| .ndo_tx_timeout = __ei_tx_timeout, |
| .ndo_get_stats = __ei_get_stats, |
| .ndo_set_rx_mode = __ei_set_multicast_list, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = __ei_poll, |
| #endif |
| }; |
| |
| static int hydra_init(struct zorro_dev *z) |
| { |
| struct net_device *dev; |
| unsigned long board = (unsigned long)ZTWO_VADDR(z->resource.start); |
| unsigned long ioaddr = board+HYDRA_NIC_BASE; |
| const char name[] = "NE2000"; |
| int start_page, stop_page; |
| int j; |
| int err; |
| struct ei_device *ei_local; |
| |
| static u32 hydra_offsets[16] = { |
| 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, |
| 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, |
| }; |
| |
| dev = ____alloc_ei_netdev(0); |
| if (!dev) |
| return -ENOMEM; |
| |
| for (j = 0; j < ETH_ALEN; j++) |
| dev->dev_addr[j] = *((u8 *)(board + HYDRA_ADDRPROM + 2*j)); |
| |
| /* We must set the 8390 for word mode. */ |
| z_writeb(0x4b, ioaddr + NE_EN0_DCFG); |
| start_page = NESM_START_PG; |
| stop_page = NESM_STOP_PG; |
| |
| ei_local = netdev_priv(dev); |
| ei_local->msg_enable = hydra_msg_enable; |
| dev->base_addr = ioaddr; |
| dev->irq = IRQ_AMIGA_PORTS; |
| |
| /* Install the Interrupt handler */ |
| if (request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, IRQF_SHARED, "Hydra Ethernet", |
| dev)) { |
| free_netdev(dev); |
| return -EAGAIN; |
| } |
| |
| ei_status.name = name; |
| ei_status.tx_start_page = start_page; |
| ei_status.stop_page = stop_page; |
| ei_status.word16 = 1; |
| ei_status.bigendian = 1; |
| |
| ei_status.rx_start_page = start_page + TX_PAGES; |
| |
| ei_status.reset_8390 = hydra_reset_8390; |
| ei_status.block_input = hydra_block_input; |
| ei_status.block_output = hydra_block_output; |
| ei_status.get_8390_hdr = hydra_get_8390_hdr; |
| ei_status.reg_offset = hydra_offsets; |
| |
| dev->netdev_ops = &hydra_netdev_ops; |
| __NS8390_init(dev, 0); |
| |
| err = register_netdev(dev); |
| if (err) { |
| free_irq(IRQ_AMIGA_PORTS, dev); |
| free_netdev(dev); |
| return err; |
| } |
| |
| zorro_set_drvdata(z, dev); |
| |
| pr_info("%s: Hydra at %pR, address %pM (hydra.c " HYDRA_VERSION ")\n", |
| dev->name, &z->resource, dev->dev_addr); |
| |
| return 0; |
| } |
| |
| static int hydra_open(struct net_device *dev) |
| { |
| __ei_open(dev); |
| return 0; |
| } |
| |
| static int hydra_close(struct net_device *dev) |
| { |
| struct ei_device *ei_local = netdev_priv(dev); |
| |
| netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); |
| __ei_close(dev); |
| return 0; |
| } |
| |
| static void hydra_reset_8390(struct net_device *dev) |
| { |
| netdev_info(dev, "Hydra hw reset not there\n"); |
| } |
| |
| static void hydra_get_8390_hdr(struct net_device *dev, |
| struct e8390_pkt_hdr *hdr, int ring_page) |
| { |
| int nic_base = dev->base_addr; |
| short *ptrs; |
| unsigned long hdr_start= (nic_base-HYDRA_NIC_BASE) + |
| ((ring_page - NESM_START_PG)<<8); |
| ptrs = (short *)hdr; |
| |
| *(ptrs++) = z_readw(hdr_start); |
| *((short *)hdr) = WORDSWAP(*((short *)hdr)); |
| hdr_start += 2; |
| *(ptrs++) = z_readw(hdr_start); |
| *((short *)hdr+1) = WORDSWAP(*((short *)hdr+1)); |
| } |
| |
| static void hydra_block_input(struct net_device *dev, int count, |
| struct sk_buff *skb, int ring_offset) |
| { |
| unsigned long nic_base = dev->base_addr; |
| unsigned long mem_base = nic_base - HYDRA_NIC_BASE; |
| unsigned long xfer_start = mem_base + ring_offset - (NESM_START_PG<<8); |
| |
| if (count&1) |
| count++; |
| |
| if (xfer_start+count > mem_base + (NESM_STOP_PG<<8)) { |
| int semi_count = (mem_base + (NESM_STOP_PG<<8)) - xfer_start; |
| |
| z_memcpy_fromio(skb->data,xfer_start,semi_count); |
| count -= semi_count; |
| z_memcpy_fromio(skb->data+semi_count, mem_base, count); |
| } else |
| z_memcpy_fromio(skb->data, xfer_start,count); |
| |
| } |
| |
| static void hydra_block_output(struct net_device *dev, int count, |
| const unsigned char *buf, int start_page) |
| { |
| unsigned long nic_base = dev->base_addr; |
| unsigned long mem_base = nic_base - HYDRA_NIC_BASE; |
| |
| if (count&1) |
| count++; |
| |
| z_memcpy_toio(mem_base+((start_page - NESM_START_PG)<<8), buf, count); |
| } |
| |
| static void hydra_remove_one(struct zorro_dev *z) |
| { |
| struct net_device *dev = zorro_get_drvdata(z); |
| |
| unregister_netdev(dev); |
| free_irq(IRQ_AMIGA_PORTS, dev); |
| release_mem_region(ZTWO_PADDR(dev->base_addr)-HYDRA_NIC_BASE, 0x10000); |
| free_netdev(dev); |
| } |
| |
| static int __init hydra_init_module(void) |
| { |
| return zorro_register_driver(&hydra_driver); |
| } |
| |
| static void __exit hydra_cleanup_module(void) |
| { |
| zorro_unregister_driver(&hydra_driver); |
| } |
| |
| module_init(hydra_init_module); |
| module_exit(hydra_cleanup_module); |
| |
| MODULE_LICENSE("GPL"); |