| /* | 
 |  * Driver for Pixcir I2C touchscreen controllers. | 
 |  * | 
 |  * Copyright (C) 2010-2011 Pixcir, Inc. | 
 |  * | 
 |  * This software is licensed under the terms of the GNU General Public | 
 |  * License version 2, as published by the Free Software Foundation, and | 
 |  * may be copied, distributed, and modified under those terms. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public | 
 |  * License along with this library; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/module.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/input.h> | 
 | #include <linux/input/mt.h> | 
 | #include <linux/input/touchscreen.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/platform_data/pixcir_i2c_ts.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */ | 
 |  | 
 | struct pixcir_i2c_ts_data { | 
 | 	struct i2c_client *client; | 
 | 	struct input_dev *input; | 
 | 	struct gpio_desc *gpio_attb; | 
 | 	struct gpio_desc *gpio_reset; | 
 | 	struct gpio_desc *gpio_enable; | 
 | 	struct gpio_desc *gpio_wake; | 
 | 	const struct pixcir_i2c_chip_data *chip; | 
 | 	struct touchscreen_properties prop; | 
 | 	int max_fingers;	/* Max fingers supported in this instance */ | 
 | 	bool running; | 
 | }; | 
 |  | 
 | struct pixcir_report_data { | 
 | 	int num_touches; | 
 | 	struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; | 
 | 	int ids[PIXCIR_MAX_SLOTS]; | 
 | }; | 
 |  | 
 | static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, | 
 | 			    struct pixcir_report_data *report) | 
 | { | 
 | 	u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5]; | 
 | 	u8 wrbuf[1] = { 0 }; | 
 | 	u8 *bufptr; | 
 | 	u8 touch; | 
 | 	int ret, i; | 
 | 	int readsize; | 
 | 	const struct pixcir_i2c_chip_data *chip = tsdata->chip; | 
 |  | 
 | 	memset(report, 0, sizeof(struct pixcir_report_data)); | 
 |  | 
 | 	i = chip->has_hw_ids ? 1 : 0; | 
 | 	readsize = 2 + tsdata->max_fingers * (4 + i); | 
 | 	if (readsize > sizeof(rdbuf)) | 
 | 		readsize = sizeof(rdbuf); | 
 |  | 
 | 	ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); | 
 | 	if (ret != sizeof(wrbuf)) { | 
 | 		dev_err(&tsdata->client->dev, | 
 | 			"%s: i2c_master_send failed(), ret=%d\n", | 
 | 			__func__, ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ret = i2c_master_recv(tsdata->client, rdbuf, readsize); | 
 | 	if (ret != readsize) { | 
 | 		dev_err(&tsdata->client->dev, | 
 | 			"%s: i2c_master_recv failed(), ret=%d\n", | 
 | 			__func__, ret); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	touch = rdbuf[0] & 0x7; | 
 | 	if (touch > tsdata->max_fingers) | 
 | 		touch = tsdata->max_fingers; | 
 |  | 
 | 	report->num_touches = touch; | 
 | 	bufptr = &rdbuf[2]; | 
 |  | 
 | 	for (i = 0; i < touch; i++) { | 
 | 		touchscreen_set_mt_pos(&report->pos[i], &tsdata->prop, | 
 | 				       get_unaligned_le16(bufptr), | 
 | 				       get_unaligned_le16(bufptr + 2)); | 
 | 		if (chip->has_hw_ids) { | 
 | 			report->ids[i] = bufptr[4]; | 
 | 			bufptr = bufptr + 5; | 
 | 		} else { | 
 | 			bufptr = bufptr + 4; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, | 
 | 			     struct pixcir_report_data *report) | 
 | { | 
 | 	int slots[PIXCIR_MAX_SLOTS]; | 
 | 	int n, i, slot; | 
 | 	struct device *dev = &ts->client->dev; | 
 | 	const struct pixcir_i2c_chip_data *chip = ts->chip; | 
 |  | 
 | 	n = report->num_touches; | 
 | 	if (n > PIXCIR_MAX_SLOTS) | 
 | 		n = PIXCIR_MAX_SLOTS; | 
 |  | 
 | 	if (!ts->chip->has_hw_ids) | 
 | 		input_mt_assign_slots(ts->input, slots, report->pos, n, 0); | 
 |  | 
 | 	for (i = 0; i < n; i++) { | 
 | 		if (chip->has_hw_ids) { | 
 | 			slot = input_mt_get_slot_by_key(ts->input, | 
 | 							report->ids[i]); | 
 | 			if (slot < 0) { | 
 | 				dev_dbg(dev, "no free slot for id 0x%x\n", | 
 | 					report->ids[i]); | 
 | 				continue; | 
 | 			} | 
 | 		} else { | 
 | 			slot = slots[i]; | 
 | 		} | 
 |  | 
 | 		input_mt_slot(ts->input, slot); | 
 | 		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true); | 
 |  | 
 | 		input_report_abs(ts->input, ABS_MT_POSITION_X, | 
 | 				 report->pos[i].x); | 
 | 		input_report_abs(ts->input, ABS_MT_POSITION_Y, | 
 | 				 report->pos[i].y); | 
 |  | 
 | 		dev_dbg(dev, "%d: slot %d, x %d, y %d\n", | 
 | 			i, slot, report->pos[i].x, report->pos[i].y); | 
 | 	} | 
 |  | 
 | 	input_mt_sync_frame(ts->input); | 
 | 	input_sync(ts->input); | 
 | } | 
 |  | 
 | static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) | 
 | { | 
 | 	struct pixcir_i2c_ts_data *tsdata = dev_id; | 
 | 	struct pixcir_report_data report; | 
 |  | 
 | 	while (tsdata->running) { | 
 | 		/* parse packet */ | 
 | 		pixcir_ts_parse(tsdata, &report); | 
 |  | 
 | 		/* report it */ | 
 | 		pixcir_ts_report(tsdata, &report); | 
 |  | 
 | 		if (gpiod_get_value_cansleep(tsdata->gpio_attb)) { | 
 | 			if (report.num_touches) { | 
 | 				/* | 
 | 				 * Last report with no finger up? | 
 | 				 * Do it now then. | 
 | 				 */ | 
 | 				input_mt_sync_frame(tsdata->input); | 
 | 				input_sync(tsdata->input); | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		msleep(20); | 
 | 	} | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata) | 
 | { | 
 | 	if (!IS_ERR_OR_NULL(tsdata->gpio_reset)) { | 
 | 		gpiod_set_value_cansleep(tsdata->gpio_reset, 1); | 
 | 		ndelay(100);	/* datasheet section 1.2.3 says 80ns min. */ | 
 | 		gpiod_set_value_cansleep(tsdata->gpio_reset, 0); | 
 | 		/* wait for controller ready. 100ms guess. */ | 
 | 		msleep(100); | 
 | 	} | 
 | } | 
 |  | 
 | static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, | 
 | 				 enum pixcir_power_mode mode) | 
 | { | 
 | 	struct device *dev = &ts->client->dev; | 
 | 	int ret; | 
 |  | 
 | 	if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) { | 
 | 		if (ts->gpio_wake) | 
 | 			gpiod_set_value_cansleep(ts->gpio_wake, 1); | 
 | 	} | 
 |  | 
 | 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s: can't read reg 0x%x : %d\n", | 
 | 			__func__, PIXCIR_REG_POWER_MODE, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret &= ~PIXCIR_POWER_MODE_MASK; | 
 | 	ret |= mode; | 
 |  | 
 | 	/* Always AUTO_IDLE */ | 
 | 	ret |= PIXCIR_POWER_ALLOW_IDLE; | 
 |  | 
 | 	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s: can't write reg 0x%x : %d\n", | 
 | 			__func__, PIXCIR_REG_POWER_MODE, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (mode == PIXCIR_POWER_HALT) { | 
 | 		if (ts->gpio_wake) | 
 | 			gpiod_set_value_cansleep(ts->gpio_wake, 0); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Set the interrupt mode for the device i.e. ATTB line behaviour | 
 |  * | 
 |  * @polarity : 1 for active high, 0 for active low. | 
 |  */ | 
 | static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts, | 
 | 			       enum pixcir_int_mode mode, bool polarity) | 
 | { | 
 | 	struct device *dev = &ts->client->dev; | 
 | 	int ret; | 
 |  | 
 | 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s: can't read reg 0x%x : %d\n", | 
 | 			__func__, PIXCIR_REG_INT_MODE, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret &= ~PIXCIR_INT_MODE_MASK; | 
 | 	ret |= mode; | 
 |  | 
 | 	if (polarity) | 
 | 		ret |= PIXCIR_INT_POL_HIGH; | 
 | 	else | 
 | 		ret &= ~PIXCIR_INT_POL_HIGH; | 
 |  | 
 | 	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s: can't write reg 0x%x : %d\n", | 
 | 			__func__, PIXCIR_REG_INT_MODE, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Enable/disable interrupt generation | 
 |  */ | 
 | static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable) | 
 | { | 
 | 	struct device *dev = &ts->client->dev; | 
 | 	int ret; | 
 |  | 
 | 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s: can't read reg 0x%x : %d\n", | 
 | 			__func__, PIXCIR_REG_INT_MODE, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	if (enable) | 
 | 		ret |= PIXCIR_INT_ENABLE; | 
 | 	else | 
 | 		ret &= ~PIXCIR_INT_ENABLE; | 
 |  | 
 | 	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dev, "%s: can't write reg 0x%x : %d\n", | 
 | 			__func__, PIXCIR_REG_INT_MODE, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pixcir_start(struct pixcir_i2c_ts_data *ts) | 
 | { | 
 | 	struct device *dev = &ts->client->dev; | 
 | 	int error; | 
 |  | 
 | 	if (ts->gpio_enable) { | 
 | 		gpiod_set_value_cansleep(ts->gpio_enable, 1); | 
 | 		msleep(100); | 
 | 	} | 
 |  | 
 | 	/* LEVEL_TOUCH interrupt with active low polarity */ | 
 | 	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0); | 
 | 	if (error) { | 
 | 		dev_err(dev, "Failed to set interrupt mode: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	ts->running = true; | 
 | 	mb();	/* Update status before IRQ can fire */ | 
 |  | 
 | 	/* enable interrupt generation */ | 
 | 	error = pixcir_int_enable(ts, true); | 
 | 	if (error) { | 
 | 		dev_err(dev, "Failed to enable interrupt generation: %d\n", | 
 | 			error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pixcir_stop(struct pixcir_i2c_ts_data *ts) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	/* Disable interrupt generation */ | 
 | 	error = pixcir_int_enable(ts, false); | 
 | 	if (error) { | 
 | 		dev_err(&ts->client->dev, | 
 | 			"Failed to disable interrupt generation: %d\n", | 
 | 			error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	/* Exit ISR if running, no more report parsing */ | 
 | 	ts->running = false; | 
 | 	mb();	/* update status before we synchronize irq */ | 
 |  | 
 | 	/* Wait till running ISR is complete */ | 
 | 	synchronize_irq(ts->client->irq); | 
 |  | 
 | 	if (ts->gpio_enable) | 
 | 		gpiod_set_value_cansleep(ts->gpio_enable, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pixcir_input_open(struct input_dev *dev) | 
 | { | 
 | 	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev); | 
 |  | 
 | 	return pixcir_start(ts); | 
 | } | 
 |  | 
 | static void pixcir_input_close(struct input_dev *dev) | 
 | { | 
 | 	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev); | 
 |  | 
 | 	pixcir_stop(ts); | 
 | } | 
 |  | 
 | static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client); | 
 | 	struct input_dev *input = ts->input; | 
 | 	int ret = 0; | 
 |  | 
 | 	mutex_lock(&input->mutex); | 
 |  | 
 | 	if (device_may_wakeup(&client->dev)) { | 
 | 		if (!input->users) { | 
 | 			ret = pixcir_start(ts); | 
 | 			if (ret) { | 
 | 				dev_err(dev, "Failed to start\n"); | 
 | 				goto unlock; | 
 | 			} | 
 | 		} | 
 | 	} else if (input->users) { | 
 | 		ret = pixcir_stop(ts); | 
 | 	} | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&input->mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client); | 
 | 	struct input_dev *input = ts->input; | 
 | 	int ret = 0; | 
 |  | 
 | 	mutex_lock(&input->mutex); | 
 |  | 
 | 	if (device_may_wakeup(&client->dev)) { | 
 |  | 
 | 		if (!input->users) { | 
 | 			ret = pixcir_stop(ts); | 
 | 			if (ret) { | 
 | 				dev_err(dev, "Failed to stop\n"); | 
 | 				goto unlock; | 
 | 			} | 
 | 		} | 
 | 	} else if (input->users) { | 
 | 		ret = pixcir_start(ts); | 
 | 	} | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&input->mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, | 
 | 			 pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id pixcir_of_match[]; | 
 |  | 
 | static int pixcir_parse_dt(struct device *dev, | 
 | 			   struct pixcir_i2c_ts_data *tsdata) | 
 | { | 
 | 	const struct of_device_id *match; | 
 |  | 
 | 	match = of_match_device(of_match_ptr(pixcir_of_match), dev); | 
 | 	if (!match) | 
 | 		return -EINVAL; | 
 |  | 
 | 	tsdata->chip = (const struct pixcir_i2c_chip_data *)match->data; | 
 | 	if (!tsdata->chip) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | static int pixcir_parse_dt(struct device *dev, | 
 | 			   struct pixcir_i2c_ts_data *tsdata) | 
 | { | 
 | 	return -EINVAL; | 
 | } | 
 | #endif | 
 |  | 
 | static int pixcir_i2c_ts_probe(struct i2c_client *client, | 
 | 			       const struct i2c_device_id *id) | 
 | { | 
 | 	const struct pixcir_ts_platform_data *pdata = | 
 | 			dev_get_platdata(&client->dev); | 
 | 	struct device *dev = &client->dev; | 
 | 	struct pixcir_i2c_ts_data *tsdata; | 
 | 	struct input_dev *input; | 
 | 	int error; | 
 |  | 
 | 	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL); | 
 | 	if (!tsdata) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (pdata) { | 
 | 		tsdata->chip = &pdata->chip; | 
 | 	} else if (dev->of_node) { | 
 | 		error = pixcir_parse_dt(dev, tsdata); | 
 | 		if (error) | 
 | 			return error; | 
 | 	} else { | 
 | 		dev_err(&client->dev, "platform data not defined\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!tsdata->chip->max_fingers) { | 
 | 		dev_err(dev, "Invalid max_fingers in chip data\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	input = devm_input_allocate_device(dev); | 
 | 	if (!input) { | 
 | 		dev_err(dev, "Failed to allocate input device\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	tsdata->client = client; | 
 | 	tsdata->input = input; | 
 |  | 
 | 	input->name = client->name; | 
 | 	input->id.bustype = BUS_I2C; | 
 | 	input->open = pixcir_input_open; | 
 | 	input->close = pixcir_input_close; | 
 | 	input->dev.parent = &client->dev; | 
 |  | 
 | 	if (pdata) { | 
 | 		input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); | 
 | 		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); | 
 | 	} else { | 
 | 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); | 
 | 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); | 
 | 		touchscreen_parse_properties(input, true, &tsdata->prop); | 
 | 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) || | 
 | 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) { | 
 | 			dev_err(dev, "Touchscreen size is not specified\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	tsdata->max_fingers = tsdata->chip->max_fingers; | 
 | 	if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) { | 
 | 		tsdata->max_fingers = PIXCIR_MAX_SLOTS; | 
 | 		dev_info(dev, "Limiting maximum fingers to %d\n", | 
 | 			 tsdata->max_fingers); | 
 | 	} | 
 |  | 
 | 	error = input_mt_init_slots(input, tsdata->max_fingers, | 
 | 				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); | 
 | 	if (error) { | 
 | 		dev_err(dev, "Error initializing Multi-Touch slots\n"); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	input_set_drvdata(input, tsdata); | 
 |  | 
 | 	tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN); | 
 | 	if (IS_ERR(tsdata->gpio_attb)) { | 
 | 		error = PTR_ERR(tsdata->gpio_attb); | 
 | 		dev_err(dev, "Failed to request ATTB gpio: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	tsdata->gpio_reset = devm_gpiod_get_optional(dev, "reset", | 
 | 						     GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(tsdata->gpio_reset)) { | 
 | 		error = PTR_ERR(tsdata->gpio_reset); | 
 | 		dev_err(dev, "Failed to request RESET gpio: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake", | 
 | 						    GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(tsdata->gpio_wake)) { | 
 | 		error = PTR_ERR(tsdata->gpio_wake); | 
 | 		if (error != -EPROBE_DEFER) | 
 | 			dev_err(dev, "Failed to get wake gpio: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable", | 
 | 						      GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(tsdata->gpio_enable)) { | 
 | 		error = PTR_ERR(tsdata->gpio_enable); | 
 | 		if (error != -EPROBE_DEFER) | 
 | 			dev_err(dev, "Failed to get enable gpio: %d\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	if (tsdata->gpio_enable) | 
 | 		msleep(100); | 
 |  | 
 | 	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr, | 
 | 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | 
 | 					  client->name, tsdata); | 
 | 	if (error) { | 
 | 		dev_err(dev, "failed to request irq %d\n", client->irq); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	pixcir_reset(tsdata); | 
 |  | 
 | 	/* Always be in IDLE mode to save power, device supports auto wake */ | 
 | 	error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE); | 
 | 	if (error) { | 
 | 		dev_err(dev, "Failed to set IDLE mode\n"); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	/* Stop device till opened */ | 
 | 	error = pixcir_stop(tsdata); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	error = input_register_device(input); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	i2c_set_clientdata(client, tsdata); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id pixcir_i2c_ts_id[] = { | 
 | 	{ "pixcir_ts", 0 }, | 
 | 	{ "pixcir_tangoc", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct pixcir_i2c_chip_data pixcir_ts_data = { | 
 | 	.max_fingers = 2, | 
 | 	/* no hw id support */ | 
 | }; | 
 |  | 
 | static const struct pixcir_i2c_chip_data pixcir_tangoc_data = { | 
 | 	.max_fingers = 5, | 
 | 	.has_hw_ids = true, | 
 | }; | 
 |  | 
 | static const struct of_device_id pixcir_of_match[] = { | 
 | 	{ .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data }, | 
 | 	{ .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, pixcir_of_match); | 
 | #endif | 
 |  | 
 | static struct i2c_driver pixcir_i2c_ts_driver = { | 
 | 	.driver = { | 
 | 		.name	= "pixcir_ts", | 
 | 		.pm	= &pixcir_dev_pm_ops, | 
 | 		.of_match_table = of_match_ptr(pixcir_of_match), | 
 | 	}, | 
 | 	.probe		= pixcir_i2c_ts_probe, | 
 | 	.id_table	= pixcir_i2c_ts_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(pixcir_i2c_ts_driver); | 
 |  | 
 | MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>"); | 
 | MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver"); | 
 | MODULE_LICENSE("GPL"); |