| /* |
| * drivers/dma/imx-sdma.c |
| * |
| * This file contains a driver for the Freescale Smart DMA engine |
| * |
| * Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| * |
| * Based on code from Freescale: |
| * |
| * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/wait.h> |
| #include <linux/sched.h> |
| #include <linux/semaphore.h> |
| #include <linux/spinlock.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/dmaengine.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| #include <asm/irq.h> |
| #include <mach/sdma.h> |
| #include <mach/dma.h> |
| #include <mach/hardware.h> |
| |
| /* SDMA registers */ |
| #define SDMA_H_C0PTR 0x000 |
| #define SDMA_H_INTR 0x004 |
| #define SDMA_H_STATSTOP 0x008 |
| #define SDMA_H_START 0x00c |
| #define SDMA_H_EVTOVR 0x010 |
| #define SDMA_H_DSPOVR 0x014 |
| #define SDMA_H_HOSTOVR 0x018 |
| #define SDMA_H_EVTPEND 0x01c |
| #define SDMA_H_DSPENBL 0x020 |
| #define SDMA_H_RESET 0x024 |
| #define SDMA_H_EVTERR 0x028 |
| #define SDMA_H_INTRMSK 0x02c |
| #define SDMA_H_PSW 0x030 |
| #define SDMA_H_EVTERRDBG 0x034 |
| #define SDMA_H_CONFIG 0x038 |
| #define SDMA_ONCE_ENB 0x040 |
| #define SDMA_ONCE_DATA 0x044 |
| #define SDMA_ONCE_INSTR 0x048 |
| #define SDMA_ONCE_STAT 0x04c |
| #define SDMA_ONCE_CMD 0x050 |
| #define SDMA_EVT_MIRROR 0x054 |
| #define SDMA_ILLINSTADDR 0x058 |
| #define SDMA_CHN0ADDR 0x05c |
| #define SDMA_ONCE_RTB 0x060 |
| #define SDMA_XTRIG_CONF1 0x070 |
| #define SDMA_XTRIG_CONF2 0x074 |
| #define SDMA_CHNENBL0_IMX35 0x200 |
| #define SDMA_CHNENBL0_IMX31 0x080 |
| #define SDMA_CHNPRI_0 0x100 |
| |
| /* |
| * Buffer descriptor status values. |
| */ |
| #define BD_DONE 0x01 |
| #define BD_WRAP 0x02 |
| #define BD_CONT 0x04 |
| #define BD_INTR 0x08 |
| #define BD_RROR 0x10 |
| #define BD_LAST 0x20 |
| #define BD_EXTD 0x80 |
| |
| /* |
| * Data Node descriptor status values. |
| */ |
| #define DND_END_OF_FRAME 0x80 |
| #define DND_END_OF_XFER 0x40 |
| #define DND_DONE 0x20 |
| #define DND_UNUSED 0x01 |
| |
| /* |
| * IPCV2 descriptor status values. |
| */ |
| #define BD_IPCV2_END_OF_FRAME 0x40 |
| |
| #define IPCV2_MAX_NODES 50 |
| /* |
| * Error bit set in the CCB status field by the SDMA, |
| * in setbd routine, in case of a transfer error |
| */ |
| #define DATA_ERROR 0x10000000 |
| |
| /* |
| * Buffer descriptor commands. |
| */ |
| #define C0_ADDR 0x01 |
| #define C0_LOAD 0x02 |
| #define C0_DUMP 0x03 |
| #define C0_SETCTX 0x07 |
| #define C0_GETCTX 0x03 |
| #define C0_SETDM 0x01 |
| #define C0_SETPM 0x04 |
| #define C0_GETDM 0x02 |
| #define C0_GETPM 0x08 |
| /* |
| * Change endianness indicator in the BD command field |
| */ |
| #define CHANGE_ENDIANNESS 0x80 |
| |
| /* |
| * Mode/Count of data node descriptors - IPCv2 |
| */ |
| struct sdma_mode_count { |
| u32 count : 16; /* size of the buffer pointed by this BD */ |
| u32 status : 8; /* E,R,I,C,W,D status bits stored here */ |
| u32 command : 8; /* command mostlky used for channel 0 */ |
| }; |
| |
| /* |
| * Buffer descriptor |
| */ |
| struct sdma_buffer_descriptor { |
| struct sdma_mode_count mode; |
| u32 buffer_addr; /* address of the buffer described */ |
| u32 ext_buffer_addr; /* extended buffer address */ |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct sdma_channel_control - Channel control Block |
| * |
| * @current_bd_ptr current buffer descriptor processed |
| * @base_bd_ptr first element of buffer descriptor array |
| * @unused padding. The SDMA engine expects an array of 128 byte |
| * control blocks |
| */ |
| struct sdma_channel_control { |
| u32 current_bd_ptr; |
| u32 base_bd_ptr; |
| u32 unused[2]; |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct sdma_state_registers - SDMA context for a channel |
| * |
| * @pc: program counter |
| * @t: test bit: status of arithmetic & test instruction |
| * @rpc: return program counter |
| * @sf: source fault while loading data |
| * @spc: loop start program counter |
| * @df: destination fault while storing data |
| * @epc: loop end program counter |
| * @lm: loop mode |
| */ |
| struct sdma_state_registers { |
| u32 pc :14; |
| u32 unused1: 1; |
| u32 t : 1; |
| u32 rpc :14; |
| u32 unused0: 1; |
| u32 sf : 1; |
| u32 spc :14; |
| u32 unused2: 1; |
| u32 df : 1; |
| u32 epc :14; |
| u32 lm : 2; |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct sdma_context_data - sdma context specific to a channel |
| * |
| * @channel_state: channel state bits |
| * @gReg: general registers |
| * @mda: burst dma destination address register |
| * @msa: burst dma source address register |
| * @ms: burst dma status register |
| * @md: burst dma data register |
| * @pda: peripheral dma destination address register |
| * @psa: peripheral dma source address register |
| * @ps: peripheral dma status register |
| * @pd: peripheral dma data register |
| * @ca: CRC polynomial register |
| * @cs: CRC accumulator register |
| * @dda: dedicated core destination address register |
| * @dsa: dedicated core source address register |
| * @ds: dedicated core status register |
| * @dd: dedicated core data register |
| */ |
| struct sdma_context_data { |
| struct sdma_state_registers channel_state; |
| u32 gReg[8]; |
| u32 mda; |
| u32 msa; |
| u32 ms; |
| u32 md; |
| u32 pda; |
| u32 psa; |
| u32 ps; |
| u32 pd; |
| u32 ca; |
| u32 cs; |
| u32 dda; |
| u32 dsa; |
| u32 ds; |
| u32 dd; |
| u32 scratch0; |
| u32 scratch1; |
| u32 scratch2; |
| u32 scratch3; |
| u32 scratch4; |
| u32 scratch5; |
| u32 scratch6; |
| u32 scratch7; |
| } __attribute__ ((packed)); |
| |
| #define NUM_BD (int)(PAGE_SIZE / sizeof(struct sdma_buffer_descriptor)) |
| |
| struct sdma_engine; |
| |
| /** |
| * struct sdma_channel - housekeeping for a SDMA channel |
| * |
| * @sdma pointer to the SDMA engine for this channel |
| * @channel the channel number, matches dmaengine chan_id + 1 |
| * @direction transfer type. Needed for setting SDMA script |
| * @peripheral_type Peripheral type. Needed for setting SDMA script |
| * @event_id0 aka dma request line |
| * @event_id1 for channels that use 2 events |
| * @word_size peripheral access size |
| * @buf_tail ID of the buffer that was processed |
| * @done channel completion |
| * @num_bd max NUM_BD. number of descriptors currently handling |
| */ |
| struct sdma_channel { |
| struct sdma_engine *sdma; |
| unsigned int channel; |
| enum dma_transfer_direction direction; |
| enum sdma_peripheral_type peripheral_type; |
| unsigned int event_id0; |
| unsigned int event_id1; |
| enum dma_slave_buswidth word_size; |
| unsigned int buf_tail; |
| struct completion done; |
| unsigned int num_bd; |
| struct sdma_buffer_descriptor *bd; |
| dma_addr_t bd_phys; |
| unsigned int pc_from_device, pc_to_device; |
| unsigned long flags; |
| dma_addr_t per_address; |
| u32 event_mask0, event_mask1; |
| u32 watermark_level; |
| u32 shp_addr, per_addr; |
| struct dma_chan chan; |
| spinlock_t lock; |
| struct dma_async_tx_descriptor desc; |
| dma_cookie_t last_completed; |
| enum dma_status status; |
| unsigned int chn_count; |
| unsigned int chn_real_count; |
| }; |
| |
| #define IMX_DMA_SG_LOOP (1 << 0) |
| |
| #define MAX_DMA_CHANNELS 32 |
| #define MXC_SDMA_DEFAULT_PRIORITY 1 |
| #define MXC_SDMA_MIN_PRIORITY 1 |
| #define MXC_SDMA_MAX_PRIORITY 7 |
| |
| #define SDMA_FIRMWARE_MAGIC 0x414d4453 |
| |
| /** |
| * struct sdma_firmware_header - Layout of the firmware image |
| * |
| * @magic "SDMA" |
| * @version_major increased whenever layout of struct sdma_script_start_addrs |
| * changes. |
| * @version_minor firmware minor version (for binary compatible changes) |
| * @script_addrs_start offset of struct sdma_script_start_addrs in this image |
| * @num_script_addrs Number of script addresses in this image |
| * @ram_code_start offset of SDMA ram image in this firmware image |
| * @ram_code_size size of SDMA ram image |
| * @script_addrs Stores the start address of the SDMA scripts |
| * (in SDMA memory space) |
| */ |
| struct sdma_firmware_header { |
| u32 magic; |
| u32 version_major; |
| u32 version_minor; |
| u32 script_addrs_start; |
| u32 num_script_addrs; |
| u32 ram_code_start; |
| u32 ram_code_size; |
| }; |
| |
| enum sdma_devtype { |
| IMX31_SDMA, /* runs on i.mx31 */ |
| IMX35_SDMA, /* runs on i.mx35 and later */ |
| }; |
| |
| struct sdma_engine { |
| struct device *dev; |
| struct device_dma_parameters dma_parms; |
| struct sdma_channel channel[MAX_DMA_CHANNELS]; |
| struct sdma_channel_control *channel_control; |
| void __iomem *regs; |
| enum sdma_devtype devtype; |
| unsigned int num_events; |
| struct sdma_context_data *context; |
| dma_addr_t context_phys; |
| struct dma_device dma_device; |
| struct clk *clk; |
| struct mutex channel_0_lock; |
| struct sdma_script_start_addrs *script_addrs; |
| }; |
| |
| static struct platform_device_id sdma_devtypes[] = { |
| { |
| .name = "imx31-sdma", |
| .driver_data = IMX31_SDMA, |
| }, { |
| .name = "imx35-sdma", |
| .driver_data = IMX35_SDMA, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, sdma_devtypes); |
| |
| static const struct of_device_id sdma_dt_ids[] = { |
| { .compatible = "fsl,imx31-sdma", .data = &sdma_devtypes[IMX31_SDMA], }, |
| { .compatible = "fsl,imx35-sdma", .data = &sdma_devtypes[IMX35_SDMA], }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, sdma_dt_ids); |
| |
| #define SDMA_H_CONFIG_DSPDMA (1 << 12) /* indicates if the DSPDMA is used */ |
| #define SDMA_H_CONFIG_RTD_PINS (1 << 11) /* indicates if Real-Time Debug pins are enabled */ |
| #define SDMA_H_CONFIG_ACR (1 << 4) /* indicates if AHB freq /core freq = 2 or 1 */ |
| #define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/ |
| |
| static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event) |
| { |
| u32 chnenbl0 = (sdma->devtype == IMX31_SDMA ? SDMA_CHNENBL0_IMX31 : |
| SDMA_CHNENBL0_IMX35); |
| return chnenbl0 + event * 4; |
| } |
| |
| static int sdma_config_ownership(struct sdma_channel *sdmac, |
| bool event_override, bool mcu_override, bool dsp_override) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| u32 evt, mcu, dsp; |
| |
| if (event_override && mcu_override && dsp_override) |
| return -EINVAL; |
| |
| evt = __raw_readl(sdma->regs + SDMA_H_EVTOVR); |
| mcu = __raw_readl(sdma->regs + SDMA_H_HOSTOVR); |
| dsp = __raw_readl(sdma->regs + SDMA_H_DSPOVR); |
| |
| if (dsp_override) |
| dsp &= ~(1 << channel); |
| else |
| dsp |= (1 << channel); |
| |
| if (event_override) |
| evt &= ~(1 << channel); |
| else |
| evt |= (1 << channel); |
| |
| if (mcu_override) |
| mcu &= ~(1 << channel); |
| else |
| mcu |= (1 << channel); |
| |
| __raw_writel(evt, sdma->regs + SDMA_H_EVTOVR); |
| __raw_writel(mcu, sdma->regs + SDMA_H_HOSTOVR); |
| __raw_writel(dsp, sdma->regs + SDMA_H_DSPOVR); |
| |
| return 0; |
| } |
| |
| /* |
| * sdma_run_channel - run a channel and wait till it's done |
| */ |
| static int sdma_run_channel(struct sdma_channel *sdmac) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| int ret; |
| |
| init_completion(&sdmac->done); |
| |
| __raw_writel(1 << channel, sdma->regs + SDMA_H_START); |
| |
| ret = wait_for_completion_timeout(&sdmac->done, HZ); |
| |
| return ret ? 0 : -ETIMEDOUT; |
| } |
| |
| static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, |
| u32 address) |
| { |
| struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd; |
| void *buf_virt; |
| dma_addr_t buf_phys; |
| int ret; |
| |
| mutex_lock(&sdma->channel_0_lock); |
| |
| buf_virt = dma_alloc_coherent(NULL, |
| size, |
| &buf_phys, GFP_KERNEL); |
| if (!buf_virt) { |
| ret = -ENOMEM; |
| goto err_out; |
| } |
| |
| bd0->mode.command = C0_SETPM; |
| bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| bd0->mode.count = size / 2; |
| bd0->buffer_addr = buf_phys; |
| bd0->ext_buffer_addr = address; |
| |
| memcpy(buf_virt, buf, size); |
| |
| ret = sdma_run_channel(&sdma->channel[0]); |
| |
| dma_free_coherent(NULL, size, buf_virt, buf_phys); |
| |
| err_out: |
| mutex_unlock(&sdma->channel_0_lock); |
| |
| return ret; |
| } |
| |
| static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| u32 val; |
| u32 chnenbl = chnenbl_ofs(sdma, event); |
| |
| val = __raw_readl(sdma->regs + chnenbl); |
| val |= (1 << channel); |
| __raw_writel(val, sdma->regs + chnenbl); |
| } |
| |
| static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| u32 chnenbl = chnenbl_ofs(sdma, event); |
| u32 val; |
| |
| val = __raw_readl(sdma->regs + chnenbl); |
| val &= ~(1 << channel); |
| __raw_writel(val, sdma->regs + chnenbl); |
| } |
| |
| static void sdma_handle_channel_loop(struct sdma_channel *sdmac) |
| { |
| struct sdma_buffer_descriptor *bd; |
| |
| /* |
| * loop mode. Iterate over descriptors, re-setup them and |
| * call callback function. |
| */ |
| while (1) { |
| bd = &sdmac->bd[sdmac->buf_tail]; |
| |
| if (bd->mode.status & BD_DONE) |
| break; |
| |
| if (bd->mode.status & BD_RROR) |
| sdmac->status = DMA_ERROR; |
| else |
| sdmac->status = DMA_IN_PROGRESS; |
| |
| bd->mode.status |= BD_DONE; |
| sdmac->buf_tail++; |
| sdmac->buf_tail %= sdmac->num_bd; |
| |
| if (sdmac->desc.callback) |
| sdmac->desc.callback(sdmac->desc.callback_param); |
| } |
| } |
| |
| static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac) |
| { |
| struct sdma_buffer_descriptor *bd; |
| int i, error = 0; |
| |
| sdmac->chn_real_count = 0; |
| /* |
| * non loop mode. Iterate over all descriptors, collect |
| * errors and call callback function |
| */ |
| for (i = 0; i < sdmac->num_bd; i++) { |
| bd = &sdmac->bd[i]; |
| |
| if (bd->mode.status & (BD_DONE | BD_RROR)) |
| error = -EIO; |
| sdmac->chn_real_count += bd->mode.count; |
| } |
| |
| if (error) |
| sdmac->status = DMA_ERROR; |
| else |
| sdmac->status = DMA_SUCCESS; |
| |
| sdmac->last_completed = sdmac->desc.cookie; |
| if (sdmac->desc.callback) |
| sdmac->desc.callback(sdmac->desc.callback_param); |
| } |
| |
| static void mxc_sdma_handle_channel(struct sdma_channel *sdmac) |
| { |
| complete(&sdmac->done); |
| |
| /* not interested in channel 0 interrupts */ |
| if (sdmac->channel == 0) |
| return; |
| |
| if (sdmac->flags & IMX_DMA_SG_LOOP) |
| sdma_handle_channel_loop(sdmac); |
| else |
| mxc_sdma_handle_channel_normal(sdmac); |
| } |
| |
| static irqreturn_t sdma_int_handler(int irq, void *dev_id) |
| { |
| struct sdma_engine *sdma = dev_id; |
| u32 stat; |
| |
| stat = __raw_readl(sdma->regs + SDMA_H_INTR); |
| __raw_writel(stat, sdma->regs + SDMA_H_INTR); |
| |
| while (stat) { |
| int channel = fls(stat) - 1; |
| struct sdma_channel *sdmac = &sdma->channel[channel]; |
| |
| mxc_sdma_handle_channel(sdmac); |
| |
| stat &= ~(1 << channel); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * sets the pc of SDMA script according to the peripheral type |
| */ |
| static void sdma_get_pc(struct sdma_channel *sdmac, |
| enum sdma_peripheral_type peripheral_type) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int per_2_emi = 0, emi_2_per = 0; |
| /* |
| * These are needed once we start to support transfers between |
| * two peripherals or memory-to-memory transfers |
| */ |
| int per_2_per = 0, emi_2_emi = 0; |
| |
| sdmac->pc_from_device = 0; |
| sdmac->pc_to_device = 0; |
| |
| switch (peripheral_type) { |
| case IMX_DMATYPE_MEMORY: |
| emi_2_emi = sdma->script_addrs->ap_2_ap_addr; |
| break; |
| case IMX_DMATYPE_DSP: |
| emi_2_per = sdma->script_addrs->bp_2_ap_addr; |
| per_2_emi = sdma->script_addrs->ap_2_bp_addr; |
| break; |
| case IMX_DMATYPE_FIRI: |
| per_2_emi = sdma->script_addrs->firi_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_firi_addr; |
| break; |
| case IMX_DMATYPE_UART: |
| per_2_emi = sdma->script_addrs->uart_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| break; |
| case IMX_DMATYPE_UART_SP: |
| per_2_emi = sdma->script_addrs->uartsh_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| break; |
| case IMX_DMATYPE_ATA: |
| per_2_emi = sdma->script_addrs->ata_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_ata_addr; |
| break; |
| case IMX_DMATYPE_CSPI: |
| case IMX_DMATYPE_EXT: |
| case IMX_DMATYPE_SSI: |
| per_2_emi = sdma->script_addrs->app_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| break; |
| case IMX_DMATYPE_SSI_SP: |
| case IMX_DMATYPE_MMC: |
| case IMX_DMATYPE_SDHC: |
| case IMX_DMATYPE_CSPI_SP: |
| case IMX_DMATYPE_ESAI: |
| case IMX_DMATYPE_MSHC_SP: |
| per_2_emi = sdma->script_addrs->shp_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| break; |
| case IMX_DMATYPE_ASRC: |
| per_2_emi = sdma->script_addrs->asrc_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; |
| per_2_per = sdma->script_addrs->per_2_per_addr; |
| break; |
| case IMX_DMATYPE_MSHC: |
| per_2_emi = sdma->script_addrs->mshc_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_mshc_addr; |
| break; |
| case IMX_DMATYPE_CCM: |
| per_2_emi = sdma->script_addrs->dptc_dvfs_addr; |
| break; |
| case IMX_DMATYPE_SPDIF: |
| per_2_emi = sdma->script_addrs->spdif_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_spdif_addr; |
| break; |
| case IMX_DMATYPE_IPU_MEMORY: |
| emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; |
| break; |
| default: |
| break; |
| } |
| |
| sdmac->pc_from_device = per_2_emi; |
| sdmac->pc_to_device = emi_2_per; |
| } |
| |
| static int sdma_load_context(struct sdma_channel *sdmac) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| int load_address; |
| struct sdma_context_data *context = sdma->context; |
| struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd; |
| int ret; |
| |
| if (sdmac->direction == DMA_DEV_TO_MEM) { |
| load_address = sdmac->pc_from_device; |
| } else { |
| load_address = sdmac->pc_to_device; |
| } |
| |
| if (load_address < 0) |
| return load_address; |
| |
| dev_dbg(sdma->dev, "load_address = %d\n", load_address); |
| dev_dbg(sdma->dev, "wml = 0x%08x\n", sdmac->watermark_level); |
| dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr); |
| dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr); |
| dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0); |
| dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1); |
| |
| mutex_lock(&sdma->channel_0_lock); |
| |
| memset(context, 0, sizeof(*context)); |
| context->channel_state.pc = load_address; |
| |
| /* Send by context the event mask,base address for peripheral |
| * and watermark level |
| */ |
| context->gReg[0] = sdmac->event_mask1; |
| context->gReg[1] = sdmac->event_mask0; |
| context->gReg[2] = sdmac->per_addr; |
| context->gReg[6] = sdmac->shp_addr; |
| context->gReg[7] = sdmac->watermark_level; |
| |
| bd0->mode.command = C0_SETDM; |
| bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| bd0->mode.count = sizeof(*context) / 4; |
| bd0->buffer_addr = sdma->context_phys; |
| bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel; |
| |
| ret = sdma_run_channel(&sdma->channel[0]); |
| |
| mutex_unlock(&sdma->channel_0_lock); |
| |
| return ret; |
| } |
| |
| static void sdma_disable_channel(struct sdma_channel *sdmac) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| |
| __raw_writel(1 << channel, sdma->regs + SDMA_H_STATSTOP); |
| sdmac->status = DMA_ERROR; |
| } |
| |
| static int sdma_config_channel(struct sdma_channel *sdmac) |
| { |
| int ret; |
| |
| sdma_disable_channel(sdmac); |
| |
| sdmac->event_mask0 = 0; |
| sdmac->event_mask1 = 0; |
| sdmac->shp_addr = 0; |
| sdmac->per_addr = 0; |
| |
| if (sdmac->event_id0) { |
| if (sdmac->event_id0 > 32) |
| return -EINVAL; |
| sdma_event_enable(sdmac, sdmac->event_id0); |
| } |
| |
| switch (sdmac->peripheral_type) { |
| case IMX_DMATYPE_DSP: |
| sdma_config_ownership(sdmac, false, true, true); |
| break; |
| case IMX_DMATYPE_MEMORY: |
| sdma_config_ownership(sdmac, false, true, false); |
| break; |
| default: |
| sdma_config_ownership(sdmac, true, true, false); |
| break; |
| } |
| |
| sdma_get_pc(sdmac, sdmac->peripheral_type); |
| |
| if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) && |
| (sdmac->peripheral_type != IMX_DMATYPE_DSP)) { |
| /* Handle multiple event channels differently */ |
| if (sdmac->event_id1) { |
| sdmac->event_mask1 = 1 << (sdmac->event_id1 % 32); |
| if (sdmac->event_id1 > 31) |
| sdmac->watermark_level |= 1 << 31; |
| sdmac->event_mask0 = 1 << (sdmac->event_id0 % 32); |
| if (sdmac->event_id0 > 31) |
| sdmac->watermark_level |= 1 << 30; |
| } else { |
| sdmac->event_mask0 = 1 << sdmac->event_id0; |
| sdmac->event_mask1 = 1 << (sdmac->event_id0 - 32); |
| } |
| /* Watermark Level */ |
| sdmac->watermark_level |= sdmac->watermark_level; |
| /* Address */ |
| sdmac->shp_addr = sdmac->per_address; |
| } else { |
| sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */ |
| } |
| |
| ret = sdma_load_context(sdmac); |
| |
| return ret; |
| } |
| |
| static int sdma_set_channel_priority(struct sdma_channel *sdmac, |
| unsigned int priority) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| |
| if (priority < MXC_SDMA_MIN_PRIORITY |
| || priority > MXC_SDMA_MAX_PRIORITY) { |
| return -EINVAL; |
| } |
| |
| __raw_writel(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel); |
| |
| return 0; |
| } |
| |
| static int sdma_request_channel(struct sdma_channel *sdmac) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| int ret = -EBUSY; |
| |
| sdmac->bd = dma_alloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, GFP_KERNEL); |
| if (!sdmac->bd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memset(sdmac->bd, 0, PAGE_SIZE); |
| |
| sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys; |
| sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| |
| clk_enable(sdma->clk); |
| |
| sdma_set_channel_priority(sdmac, MXC_SDMA_DEFAULT_PRIORITY); |
| |
| init_completion(&sdmac->done); |
| |
| sdmac->buf_tail = 0; |
| |
| return 0; |
| out: |
| |
| return ret; |
| } |
| |
| static void sdma_enable_channel(struct sdma_engine *sdma, int channel) |
| { |
| __raw_writel(1 << channel, sdma->regs + SDMA_H_START); |
| } |
| |
| static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdmac) |
| { |
| dma_cookie_t cookie = sdmac->chan.cookie; |
| |
| if (++cookie < 0) |
| cookie = 1; |
| |
| sdmac->chan.cookie = cookie; |
| sdmac->desc.cookie = cookie; |
| |
| return cookie; |
| } |
| |
| static struct sdma_channel *to_sdma_chan(struct dma_chan *chan) |
| { |
| return container_of(chan, struct sdma_channel, chan); |
| } |
| |
| static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx) |
| { |
| unsigned long flags; |
| struct sdma_channel *sdmac = to_sdma_chan(tx->chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| dma_cookie_t cookie; |
| |
| spin_lock_irqsave(&sdmac->lock, flags); |
| |
| cookie = sdma_assign_cookie(sdmac); |
| |
| sdma_enable_channel(sdma, sdmac->channel); |
| |
| spin_unlock_irqrestore(&sdmac->lock, flags); |
| |
| return cookie; |
| } |
| |
| static int sdma_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct imx_dma_data *data = chan->private; |
| int prio, ret; |
| |
| if (!data) |
| return -EINVAL; |
| |
| switch (data->priority) { |
| case DMA_PRIO_HIGH: |
| prio = 3; |
| break; |
| case DMA_PRIO_MEDIUM: |
| prio = 2; |
| break; |
| case DMA_PRIO_LOW: |
| default: |
| prio = 1; |
| break; |
| } |
| |
| sdmac->peripheral_type = data->peripheral_type; |
| sdmac->event_id0 = data->dma_request; |
| ret = sdma_set_channel_priority(sdmac, prio); |
| if (ret) |
| return ret; |
| |
| ret = sdma_request_channel(sdmac); |
| if (ret) |
| return ret; |
| |
| dma_async_tx_descriptor_init(&sdmac->desc, chan); |
| sdmac->desc.tx_submit = sdma_tx_submit; |
| /* txd.flags will be overwritten in prep funcs */ |
| sdmac->desc.flags = DMA_CTRL_ACK; |
| |
| return 0; |
| } |
| |
| static void sdma_free_chan_resources(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| |
| sdma_disable_channel(sdmac); |
| |
| if (sdmac->event_id0) |
| sdma_event_disable(sdmac, sdmac->event_id0); |
| if (sdmac->event_id1) |
| sdma_event_disable(sdmac, sdmac->event_id1); |
| |
| sdmac->event_id0 = 0; |
| sdmac->event_id1 = 0; |
| |
| sdma_set_channel_priority(sdmac, 0); |
| |
| dma_free_coherent(NULL, PAGE_SIZE, sdmac->bd, sdmac->bd_phys); |
| |
| clk_disable(sdma->clk); |
| } |
| |
| static struct dma_async_tx_descriptor *sdma_prep_slave_sg( |
| struct dma_chan *chan, struct scatterlist *sgl, |
| unsigned int sg_len, enum dma_transfer_direction direction, |
| unsigned long flags) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| int ret, i, count; |
| int channel = sdmac->channel; |
| struct scatterlist *sg; |
| |
| if (sdmac->status == DMA_IN_PROGRESS) |
| return NULL; |
| sdmac->status = DMA_IN_PROGRESS; |
| |
| sdmac->flags = 0; |
| |
| dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", |
| sg_len, channel); |
| |
| sdmac->direction = direction; |
| ret = sdma_load_context(sdmac); |
| if (ret) |
| goto err_out; |
| |
| if (sg_len > NUM_BD) { |
| dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n", |
| channel, sg_len, NUM_BD); |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| sdmac->chn_count = 0; |
| for_each_sg(sgl, sg, sg_len, i) { |
| struct sdma_buffer_descriptor *bd = &sdmac->bd[i]; |
| int param; |
| |
| bd->buffer_addr = sg->dma_address; |
| |
| count = sg->length; |
| |
| if (count > 0xffff) { |
| dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n", |
| channel, count, 0xffff); |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| bd->mode.count = count; |
| sdmac->chn_count += count; |
| |
| if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) { |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| switch (sdmac->word_size) { |
| case DMA_SLAVE_BUSWIDTH_4_BYTES: |
| bd->mode.command = 0; |
| if (count & 3 || sg->dma_address & 3) |
| return NULL; |
| break; |
| case DMA_SLAVE_BUSWIDTH_2_BYTES: |
| bd->mode.command = 2; |
| if (count & 1 || sg->dma_address & 1) |
| return NULL; |
| break; |
| case DMA_SLAVE_BUSWIDTH_1_BYTE: |
| bd->mode.command = 1; |
| break; |
| default: |
| return NULL; |
| } |
| |
| param = BD_DONE | BD_EXTD | BD_CONT; |
| |
| if (i + 1 == sg_len) { |
| param |= BD_INTR; |
| param |= BD_LAST; |
| param &= ~BD_CONT; |
| } |
| |
| dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n", |
| i, count, sg->dma_address, |
| param & BD_WRAP ? "wrap" : "", |
| param & BD_INTR ? " intr" : ""); |
| |
| bd->mode.status = param; |
| } |
| |
| sdmac->num_bd = sg_len; |
| sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| |
| return &sdmac->desc; |
| err_out: |
| sdmac->status = DMA_ERROR; |
| return NULL; |
| } |
| |
| static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( |
| struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, |
| size_t period_len, enum dma_transfer_direction direction) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| int num_periods = buf_len / period_len; |
| int channel = sdmac->channel; |
| int ret, i = 0, buf = 0; |
| |
| dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); |
| |
| if (sdmac->status == DMA_IN_PROGRESS) |
| return NULL; |
| |
| sdmac->status = DMA_IN_PROGRESS; |
| |
| sdmac->flags |= IMX_DMA_SG_LOOP; |
| sdmac->direction = direction; |
| ret = sdma_load_context(sdmac); |
| if (ret) |
| goto err_out; |
| |
| if (num_periods > NUM_BD) { |
| dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n", |
| channel, num_periods, NUM_BD); |
| goto err_out; |
| } |
| |
| if (period_len > 0xffff) { |
| dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %d > %d\n", |
| channel, period_len, 0xffff); |
| goto err_out; |
| } |
| |
| while (buf < buf_len) { |
| struct sdma_buffer_descriptor *bd = &sdmac->bd[i]; |
| int param; |
| |
| bd->buffer_addr = dma_addr; |
| |
| bd->mode.count = period_len; |
| |
| if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) |
| goto err_out; |
| if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES) |
| bd->mode.command = 0; |
| else |
| bd->mode.command = sdmac->word_size; |
| |
| param = BD_DONE | BD_EXTD | BD_CONT | BD_INTR; |
| if (i + 1 == num_periods) |
| param |= BD_WRAP; |
| |
| dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n", |
| i, period_len, dma_addr, |
| param & BD_WRAP ? "wrap" : "", |
| param & BD_INTR ? " intr" : ""); |
| |
| bd->mode.status = param; |
| |
| dma_addr += period_len; |
| buf += period_len; |
| |
| i++; |
| } |
| |
| sdmac->num_bd = num_periods; |
| sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| |
| return &sdmac->desc; |
| err_out: |
| sdmac->status = DMA_ERROR; |
| return NULL; |
| } |
| |
| static int sdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, |
| unsigned long arg) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct dma_slave_config *dmaengine_cfg = (void *)arg; |
| |
| switch (cmd) { |
| case DMA_TERMINATE_ALL: |
| sdma_disable_channel(sdmac); |
| return 0; |
| case DMA_SLAVE_CONFIG: |
| if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) { |
| sdmac->per_address = dmaengine_cfg->src_addr; |
| sdmac->watermark_level = dmaengine_cfg->src_maxburst * |
| dmaengine_cfg->src_addr_width; |
| sdmac->word_size = dmaengine_cfg->src_addr_width; |
| } else { |
| sdmac->per_address = dmaengine_cfg->dst_addr; |
| sdmac->watermark_level = dmaengine_cfg->dst_maxburst * |
| dmaengine_cfg->dst_addr_width; |
| sdmac->word_size = dmaengine_cfg->dst_addr_width; |
| } |
| sdmac->direction = dmaengine_cfg->direction; |
| return sdma_config_channel(sdmac); |
| default: |
| return -ENOSYS; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static enum dma_status sdma_tx_status(struct dma_chan *chan, |
| dma_cookie_t cookie, |
| struct dma_tx_state *txstate) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| dma_cookie_t last_used; |
| |
| last_used = chan->cookie; |
| |
| dma_set_tx_state(txstate, sdmac->last_completed, last_used, |
| sdmac->chn_count - sdmac->chn_real_count); |
| |
| return sdmac->status; |
| } |
| |
| static void sdma_issue_pending(struct dma_chan *chan) |
| { |
| /* |
| * Nothing to do. We only have a single descriptor |
| */ |
| } |
| |
| #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 |
| |
| static void sdma_add_scripts(struct sdma_engine *sdma, |
| const struct sdma_script_start_addrs *addr) |
| { |
| s32 *addr_arr = (u32 *)addr; |
| s32 *saddr_arr = (u32 *)sdma->script_addrs; |
| int i; |
| |
| for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) |
| if (addr_arr[i] > 0) |
| saddr_arr[i] = addr_arr[i]; |
| } |
| |
| static void sdma_load_firmware(const struct firmware *fw, void *context) |
| { |
| struct sdma_engine *sdma = context; |
| const struct sdma_firmware_header *header; |
| const struct sdma_script_start_addrs *addr; |
| unsigned short *ram_code; |
| |
| if (!fw) { |
| dev_err(sdma->dev, "firmware not found\n"); |
| return; |
| } |
| |
| if (fw->size < sizeof(*header)) |
| goto err_firmware; |
| |
| header = (struct sdma_firmware_header *)fw->data; |
| |
| if (header->magic != SDMA_FIRMWARE_MAGIC) |
| goto err_firmware; |
| if (header->ram_code_start + header->ram_code_size > fw->size) |
| goto err_firmware; |
| |
| addr = (void *)header + header->script_addrs_start; |
| ram_code = (void *)header + header->ram_code_start; |
| |
| clk_enable(sdma->clk); |
| /* download the RAM image for SDMA */ |
| sdma_load_script(sdma, ram_code, |
| header->ram_code_size, |
| addr->ram_code_start_addr); |
| clk_disable(sdma->clk); |
| |
| sdma_add_scripts(sdma, addr); |
| |
| dev_info(sdma->dev, "loaded firmware %d.%d\n", |
| header->version_major, |
| header->version_minor); |
| |
| err_firmware: |
| release_firmware(fw); |
| } |
| |
| static int __init sdma_get_firmware(struct sdma_engine *sdma, |
| const char *fw_name) |
| { |
| int ret; |
| |
| ret = request_firmware_nowait(THIS_MODULE, |
| FW_ACTION_HOTPLUG, fw_name, sdma->dev, |
| GFP_KERNEL, sdma, sdma_load_firmware); |
| |
| return ret; |
| } |
| |
| static int __init sdma_init(struct sdma_engine *sdma) |
| { |
| int i, ret; |
| dma_addr_t ccb_phys; |
| |
| switch (sdma->devtype) { |
| case IMX31_SDMA: |
| sdma->num_events = 32; |
| break; |
| case IMX35_SDMA: |
| sdma->num_events = 48; |
| break; |
| default: |
| dev_err(sdma->dev, "Unknown sdma type %d. aborting\n", |
| sdma->devtype); |
| return -ENODEV; |
| } |
| |
| clk_enable(sdma->clk); |
| |
| /* Be sure SDMA has not started yet */ |
| __raw_writel(0, sdma->regs + SDMA_H_C0PTR); |
| |
| sdma->channel_control = dma_alloc_coherent(NULL, |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control) + |
| sizeof(struct sdma_context_data), |
| &ccb_phys, GFP_KERNEL); |
| |
| if (!sdma->channel_control) { |
| ret = -ENOMEM; |
| goto err_dma_alloc; |
| } |
| |
| sdma->context = (void *)sdma->channel_control + |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| sdma->context_phys = ccb_phys + |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| |
| /* Zero-out the CCB structures array just allocated */ |
| memset(sdma->channel_control, 0, |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control)); |
| |
| /* disable all channels */ |
| for (i = 0; i < sdma->num_events; i++) |
| __raw_writel(0, sdma->regs + chnenbl_ofs(sdma, i)); |
| |
| /* All channels have priority 0 */ |
| for (i = 0; i < MAX_DMA_CHANNELS; i++) |
| __raw_writel(0, sdma->regs + SDMA_CHNPRI_0 + i * 4); |
| |
| ret = sdma_request_channel(&sdma->channel[0]); |
| if (ret) |
| goto err_dma_alloc; |
| |
| sdma_config_ownership(&sdma->channel[0], false, true, false); |
| |
| /* Set Command Channel (Channel Zero) */ |
| __raw_writel(0x4050, sdma->regs + SDMA_CHN0ADDR); |
| |
| /* Set bits of CONFIG register but with static context switching */ |
| /* FIXME: Check whether to set ACR bit depending on clock ratios */ |
| __raw_writel(0, sdma->regs + SDMA_H_CONFIG); |
| |
| __raw_writel(ccb_phys, sdma->regs + SDMA_H_C0PTR); |
| |
| /* Set bits of CONFIG register with given context switching mode */ |
| __raw_writel(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); |
| |
| /* Initializes channel's priorities */ |
| sdma_set_channel_priority(&sdma->channel[0], 7); |
| |
| clk_disable(sdma->clk); |
| |
| return 0; |
| |
| err_dma_alloc: |
| clk_disable(sdma->clk); |
| dev_err(sdma->dev, "initialisation failed with %d\n", ret); |
| return ret; |
| } |
| |
| static int __init sdma_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(sdma_dt_ids, &pdev->dev); |
| struct device_node *np = pdev->dev.of_node; |
| const char *fw_name; |
| int ret; |
| int irq; |
| struct resource *iores; |
| struct sdma_platform_data *pdata = pdev->dev.platform_data; |
| int i; |
| struct sdma_engine *sdma; |
| s32 *saddr_arr; |
| |
| sdma = kzalloc(sizeof(*sdma), GFP_KERNEL); |
| if (!sdma) |
| return -ENOMEM; |
| |
| mutex_init(&sdma->channel_0_lock); |
| |
| sdma->dev = &pdev->dev; |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (!iores || irq < 0) { |
| ret = -EINVAL; |
| goto err_irq; |
| } |
| |
| if (!request_mem_region(iores->start, resource_size(iores), pdev->name)) { |
| ret = -EBUSY; |
| goto err_request_region; |
| } |
| |
| sdma->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(sdma->clk)) { |
| ret = PTR_ERR(sdma->clk); |
| goto err_clk; |
| } |
| |
| sdma->regs = ioremap(iores->start, resource_size(iores)); |
| if (!sdma->regs) { |
| ret = -ENOMEM; |
| goto err_ioremap; |
| } |
| |
| ret = request_irq(irq, sdma_int_handler, 0, "sdma", sdma); |
| if (ret) |
| goto err_request_irq; |
| |
| sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL); |
| if (!sdma->script_addrs) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| /* initially no scripts available */ |
| saddr_arr = (s32 *)sdma->script_addrs; |
| for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) |
| saddr_arr[i] = -EINVAL; |
| |
| if (of_id) |
| pdev->id_entry = of_id->data; |
| sdma->devtype = pdev->id_entry->driver_data; |
| |
| dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); |
| dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); |
| |
| INIT_LIST_HEAD(&sdma->dma_device.channels); |
| /* Initialize channel parameters */ |
| for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
| struct sdma_channel *sdmac = &sdma->channel[i]; |
| |
| sdmac->sdma = sdma; |
| spin_lock_init(&sdmac->lock); |
| |
| sdmac->chan.device = &sdma->dma_device; |
| sdmac->channel = i; |
| |
| /* |
| * Add the channel to the DMAC list. Do not add channel 0 though |
| * because we need it internally in the SDMA driver. This also means |
| * that channel 0 in dmaengine counting matches sdma channel 1. |
| */ |
| if (i) |
| list_add_tail(&sdmac->chan.device_node, |
| &sdma->dma_device.channels); |
| } |
| |
| ret = sdma_init(sdma); |
| if (ret) |
| goto err_init; |
| |
| if (pdata && pdata->script_addrs) |
| sdma_add_scripts(sdma, pdata->script_addrs); |
| |
| if (pdata) { |
| sdma_get_firmware(sdma, pdata->fw_name); |
| } else { |
| /* |
| * Because that device tree does not encode ROM script address, |
| * the RAM script in firmware is mandatory for device tree |
| * probe, otherwise it fails. |
| */ |
| ret = of_property_read_string(np, "fsl,sdma-ram-script-name", |
| &fw_name); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to get firmware name\n"); |
| goto err_init; |
| } |
| |
| ret = sdma_get_firmware(sdma, fw_name); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to get firmware\n"); |
| goto err_init; |
| } |
| } |
| |
| sdma->dma_device.dev = &pdev->dev; |
| |
| sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources; |
| sdma->dma_device.device_free_chan_resources = sdma_free_chan_resources; |
| sdma->dma_device.device_tx_status = sdma_tx_status; |
| sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg; |
| sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; |
| sdma->dma_device.device_control = sdma_control; |
| sdma->dma_device.device_issue_pending = sdma_issue_pending; |
| sdma->dma_device.dev->dma_parms = &sdma->dma_parms; |
| dma_set_max_seg_size(sdma->dma_device.dev, 65535); |
| |
| ret = dma_async_device_register(&sdma->dma_device); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to register\n"); |
| goto err_init; |
| } |
| |
| dev_info(sdma->dev, "initialized\n"); |
| |
| return 0; |
| |
| err_init: |
| kfree(sdma->script_addrs); |
| err_alloc: |
| free_irq(irq, sdma); |
| err_request_irq: |
| iounmap(sdma->regs); |
| err_ioremap: |
| clk_put(sdma->clk); |
| err_clk: |
| release_mem_region(iores->start, resource_size(iores)); |
| err_request_region: |
| err_irq: |
| kfree(sdma); |
| return ret; |
| } |
| |
| static int __exit sdma_remove(struct platform_device *pdev) |
| { |
| return -EBUSY; |
| } |
| |
| static struct platform_driver sdma_driver = { |
| .driver = { |
| .name = "imx-sdma", |
| .of_match_table = sdma_dt_ids, |
| }, |
| .id_table = sdma_devtypes, |
| .remove = __exit_p(sdma_remove), |
| }; |
| |
| static int __init sdma_module_init(void) |
| { |
| return platform_driver_probe(&sdma_driver, sdma_probe); |
| } |
| module_init(sdma_module_init); |
| |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>"); |
| MODULE_DESCRIPTION("i.MX SDMA driver"); |
| MODULE_LICENSE("GPL"); |