| /* | |
| * arch/sh/kernel/traps_64.c | |
| * | |
| * Copyright (C) 2000, 2001 Paolo Alberelli | |
| * Copyright (C) 2003, 2004 Paul Mundt | |
| * Copyright (C) 2003, 2004 Richard Curnow | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/sched/debug.h> | |
| #include <linux/kernel.h> | |
| #include <linux/string.h> | |
| #include <linux/errno.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/timer.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/sysctl.h> | |
| #include <linux/module.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/io.h> | |
| #include <asm/alignment.h> | |
| #include <asm/processor.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/fpu.h> | |
| static int read_opcode(reg_size_t pc, insn_size_t *result_opcode, int from_user_mode) | |
| { | |
| int get_user_error; | |
| unsigned long aligned_pc; | |
| insn_size_t opcode; | |
| if ((pc & 3) == 1) { | |
| /* SHmedia */ | |
| aligned_pc = pc & ~3; | |
| if (from_user_mode) { | |
| if (!access_ok(VERIFY_READ, aligned_pc, sizeof(insn_size_t))) { | |
| get_user_error = -EFAULT; | |
| } else { | |
| get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc); | |
| *result_opcode = opcode; | |
| } | |
| return get_user_error; | |
| } else { | |
| /* If the fault was in the kernel, we can either read | |
| * this directly, or if not, we fault. | |
| */ | |
| *result_opcode = *(insn_size_t *)aligned_pc; | |
| return 0; | |
| } | |
| } else if ((pc & 1) == 0) { | |
| /* SHcompact */ | |
| /* TODO : provide handling for this. We don't really support | |
| user-mode SHcompact yet, and for a kernel fault, this would | |
| have to come from a module built for SHcompact. */ | |
| return -EFAULT; | |
| } else { | |
| /* misaligned */ | |
| return -EFAULT; | |
| } | |
| } | |
| static int address_is_sign_extended(__u64 a) | |
| { | |
| __u64 b; | |
| #if (NEFF == 32) | |
| b = (__u64)(__s64)(__s32)(a & 0xffffffffUL); | |
| return (b == a) ? 1 : 0; | |
| #else | |
| #error "Sign extend check only works for NEFF==32" | |
| #endif | |
| } | |
| /* return -1 for fault, 0 for OK */ | |
| static int generate_and_check_address(struct pt_regs *regs, | |
| insn_size_t opcode, | |
| int displacement_not_indexed, | |
| int width_shift, | |
| __u64 *address) | |
| { | |
| __u64 base_address, addr; | |
| int basereg; | |
| switch (1 << width_shift) { | |
| case 1: inc_unaligned_byte_access(); break; | |
| case 2: inc_unaligned_word_access(); break; | |
| case 4: inc_unaligned_dword_access(); break; | |
| case 8: inc_unaligned_multi_access(); break; | |
| } | |
| basereg = (opcode >> 20) & 0x3f; | |
| base_address = regs->regs[basereg]; | |
| if (displacement_not_indexed) { | |
| __s64 displacement; | |
| displacement = (opcode >> 10) & 0x3ff; | |
| displacement = sign_extend64(displacement, 9); | |
| addr = (__u64)((__s64)base_address + (displacement << width_shift)); | |
| } else { | |
| __u64 offset; | |
| int offsetreg; | |
| offsetreg = (opcode >> 10) & 0x3f; | |
| offset = regs->regs[offsetreg]; | |
| addr = base_address + offset; | |
| } | |
| /* Check sign extended */ | |
| if (!address_is_sign_extended(addr)) | |
| return -1; | |
| /* Check accessible. For misaligned access in the kernel, assume the | |
| address is always accessible (and if not, just fault when the | |
| load/store gets done.) */ | |
| if (user_mode(regs)) { | |
| inc_unaligned_user_access(); | |
| if (addr >= TASK_SIZE) | |
| return -1; | |
| } else | |
| inc_unaligned_kernel_access(); | |
| *address = addr; | |
| perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, addr); | |
| unaligned_fixups_notify(current, opcode, regs); | |
| return 0; | |
| } | |
| static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result) | |
| { | |
| unsigned short x; | |
| unsigned char *p, *q; | |
| p = (unsigned char *) (int) address; | |
| q = (unsigned char *) &x; | |
| q[0] = p[0]; | |
| q[1] = p[1]; | |
| if (do_sign_extend) { | |
| *result = (__u64)(__s64) *(short *) &x; | |
| } else { | |
| *result = (__u64) x; | |
| } | |
| } | |
| static void misaligned_kernel_word_store(__u64 address, __u64 value) | |
| { | |
| unsigned short x; | |
| unsigned char *p, *q; | |
| p = (unsigned char *) (int) address; | |
| q = (unsigned char *) &x; | |
| x = (__u16) value; | |
| p[0] = q[0]; | |
| p[1] = q[1]; | |
| } | |
| static int misaligned_load(struct pt_regs *regs, | |
| insn_size_t opcode, | |
| int displacement_not_indexed, | |
| int width_shift, | |
| int do_sign_extend) | |
| { | |
| /* Return -1 for a fault, 0 for OK */ | |
| int error; | |
| int destreg; | |
| __u64 address; | |
| error = generate_and_check_address(regs, opcode, | |
| displacement_not_indexed, width_shift, &address); | |
| if (error < 0) | |
| return error; | |
| destreg = (opcode >> 4) & 0x3f; | |
| if (user_mode(regs)) { | |
| __u64 buffer; | |
| if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) { | |
| return -1; | |
| } | |
| if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) { | |
| return -1; /* fault */ | |
| } | |
| switch (width_shift) { | |
| case 1: | |
| if (do_sign_extend) { | |
| regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer; | |
| } else { | |
| regs->regs[destreg] = (__u64) *(__u16 *) &buffer; | |
| } | |
| break; | |
| case 2: | |
| regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer; | |
| break; | |
| case 3: | |
| regs->regs[destreg] = buffer; | |
| break; | |
| default: | |
| printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", | |
| width_shift, (unsigned long) regs->pc); | |
| break; | |
| } | |
| } else { | |
| /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ | |
| __u64 lo, hi; | |
| switch (width_shift) { | |
| case 1: | |
| misaligned_kernel_word_load(address, do_sign_extend, ®s->regs[destreg]); | |
| break; | |
| case 2: | |
| asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address)); | |
| asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address)); | |
| regs->regs[destreg] = lo | hi; | |
| break; | |
| case 3: | |
| asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address)); | |
| asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address)); | |
| regs->regs[destreg] = lo | hi; | |
| break; | |
| default: | |
| printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", | |
| width_shift, (unsigned long) regs->pc); | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int misaligned_store(struct pt_regs *regs, | |
| insn_size_t opcode, | |
| int displacement_not_indexed, | |
| int width_shift) | |
| { | |
| /* Return -1 for a fault, 0 for OK */ | |
| int error; | |
| int srcreg; | |
| __u64 address; | |
| error = generate_and_check_address(regs, opcode, | |
| displacement_not_indexed, width_shift, &address); | |
| if (error < 0) | |
| return error; | |
| srcreg = (opcode >> 4) & 0x3f; | |
| if (user_mode(regs)) { | |
| __u64 buffer; | |
| if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) { | |
| return -1; | |
| } | |
| switch (width_shift) { | |
| case 1: | |
| *(__u16 *) &buffer = (__u16) regs->regs[srcreg]; | |
| break; | |
| case 2: | |
| *(__u32 *) &buffer = (__u32) regs->regs[srcreg]; | |
| break; | |
| case 3: | |
| buffer = regs->regs[srcreg]; | |
| break; | |
| default: | |
| printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", | |
| width_shift, (unsigned long) regs->pc); | |
| break; | |
| } | |
| if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { | |
| return -1; /* fault */ | |
| } | |
| } else { | |
| /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ | |
| __u64 val = regs->regs[srcreg]; | |
| switch (width_shift) { | |
| case 1: | |
| misaligned_kernel_word_store(address, val); | |
| break; | |
| case 2: | |
| asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address)); | |
| asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address)); | |
| break; | |
| case 3: | |
| asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address)); | |
| asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address)); | |
| break; | |
| default: | |
| printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", | |
| width_shift, (unsigned long) regs->pc); | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Never need to fix up misaligned FPU accesses within the kernel since that's a real | |
| error. */ | |
| static int misaligned_fpu_load(struct pt_regs *regs, | |
| insn_size_t opcode, | |
| int displacement_not_indexed, | |
| int width_shift, | |
| int do_paired_load) | |
| { | |
| /* Return -1 for a fault, 0 for OK */ | |
| int error; | |
| int destreg; | |
| __u64 address; | |
| error = generate_and_check_address(regs, opcode, | |
| displacement_not_indexed, width_shift, &address); | |
| if (error < 0) | |
| return error; | |
| destreg = (opcode >> 4) & 0x3f; | |
| if (user_mode(regs)) { | |
| __u64 buffer; | |
| __u32 buflo, bufhi; | |
| if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) { | |
| return -1; | |
| } | |
| if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) { | |
| return -1; /* fault */ | |
| } | |
| /* 'current' may be the current owner of the FPU state, so | |
| context switch the registers into memory so they can be | |
| indexed by register number. */ | |
| if (last_task_used_math == current) { | |
| enable_fpu(); | |
| save_fpu(current); | |
| disable_fpu(); | |
| last_task_used_math = NULL; | |
| regs->sr |= SR_FD; | |
| } | |
| buflo = *(__u32*) &buffer; | |
| bufhi = *(1 + (__u32*) &buffer); | |
| switch (width_shift) { | |
| case 2: | |
| current->thread.xstate->hardfpu.fp_regs[destreg] = buflo; | |
| break; | |
| case 3: | |
| if (do_paired_load) { | |
| current->thread.xstate->hardfpu.fp_regs[destreg] = buflo; | |
| current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi; | |
| } else { | |
| #if defined(CONFIG_CPU_LITTLE_ENDIAN) | |
| current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi; | |
| current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo; | |
| #else | |
| current->thread.xstate->hardfpu.fp_regs[destreg] = buflo; | |
| current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi; | |
| #endif | |
| } | |
| break; | |
| default: | |
| printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n", | |
| width_shift, (unsigned long) regs->pc); | |
| break; | |
| } | |
| return 0; | |
| } else { | |
| die ("Misaligned FPU load inside kernel", regs, 0); | |
| return -1; | |
| } | |
| } | |
| static int misaligned_fpu_store(struct pt_regs *regs, | |
| insn_size_t opcode, | |
| int displacement_not_indexed, | |
| int width_shift, | |
| int do_paired_load) | |
| { | |
| /* Return -1 for a fault, 0 for OK */ | |
| int error; | |
| int srcreg; | |
| __u64 address; | |
| error = generate_and_check_address(regs, opcode, | |
| displacement_not_indexed, width_shift, &address); | |
| if (error < 0) | |
| return error; | |
| srcreg = (opcode >> 4) & 0x3f; | |
| if (user_mode(regs)) { | |
| __u64 buffer; | |
| /* Initialise these to NaNs. */ | |
| __u32 buflo=0xffffffffUL, bufhi=0xffffffffUL; | |
| if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) { | |
| return -1; | |
| } | |
| /* 'current' may be the current owner of the FPU state, so | |
| context switch the registers into memory so they can be | |
| indexed by register number. */ | |
| if (last_task_used_math == current) { | |
| enable_fpu(); | |
| save_fpu(current); | |
| disable_fpu(); | |
| last_task_used_math = NULL; | |
| regs->sr |= SR_FD; | |
| } | |
| switch (width_shift) { | |
| case 2: | |
| buflo = current->thread.xstate->hardfpu.fp_regs[srcreg]; | |
| break; | |
| case 3: | |
| if (do_paired_load) { | |
| buflo = current->thread.xstate->hardfpu.fp_regs[srcreg]; | |
| bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1]; | |
| } else { | |
| #if defined(CONFIG_CPU_LITTLE_ENDIAN) | |
| bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg]; | |
| buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1]; | |
| #else | |
| buflo = current->thread.xstate->hardfpu.fp_regs[srcreg]; | |
| bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1]; | |
| #endif | |
| } | |
| break; | |
| default: | |
| printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n", | |
| width_shift, (unsigned long) regs->pc); | |
| break; | |
| } | |
| *(__u32*) &buffer = buflo; | |
| *(1 + (__u32*) &buffer) = bufhi; | |
| if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { | |
| return -1; /* fault */ | |
| } | |
| return 0; | |
| } else { | |
| die ("Misaligned FPU load inside kernel", regs, 0); | |
| return -1; | |
| } | |
| } | |
| static int misaligned_fixup(struct pt_regs *regs) | |
| { | |
| insn_size_t opcode; | |
| int error; | |
| int major, minor; | |
| unsigned int user_action; | |
| user_action = unaligned_user_action(); | |
| if (!(user_action & UM_FIXUP)) | |
| return -1; | |
| error = read_opcode(regs->pc, &opcode, user_mode(regs)); | |
| if (error < 0) { | |
| return error; | |
| } | |
| major = (opcode >> 26) & 0x3f; | |
| minor = (opcode >> 16) & 0xf; | |
| switch (major) { | |
| case (0x84>>2): /* LD.W */ | |
| error = misaligned_load(regs, opcode, 1, 1, 1); | |
| break; | |
| case (0xb0>>2): /* LD.UW */ | |
| error = misaligned_load(regs, opcode, 1, 1, 0); | |
| break; | |
| case (0x88>>2): /* LD.L */ | |
| error = misaligned_load(regs, opcode, 1, 2, 1); | |
| break; | |
| case (0x8c>>2): /* LD.Q */ | |
| error = misaligned_load(regs, opcode, 1, 3, 0); | |
| break; | |
| case (0xa4>>2): /* ST.W */ | |
| error = misaligned_store(regs, opcode, 1, 1); | |
| break; | |
| case (0xa8>>2): /* ST.L */ | |
| error = misaligned_store(regs, opcode, 1, 2); | |
| break; | |
| case (0xac>>2): /* ST.Q */ | |
| error = misaligned_store(regs, opcode, 1, 3); | |
| break; | |
| case (0x40>>2): /* indexed loads */ | |
| switch (minor) { | |
| case 0x1: /* LDX.W */ | |
| error = misaligned_load(regs, opcode, 0, 1, 1); | |
| break; | |
| case 0x5: /* LDX.UW */ | |
| error = misaligned_load(regs, opcode, 0, 1, 0); | |
| break; | |
| case 0x2: /* LDX.L */ | |
| error = misaligned_load(regs, opcode, 0, 2, 1); | |
| break; | |
| case 0x3: /* LDX.Q */ | |
| error = misaligned_load(regs, opcode, 0, 3, 0); | |
| break; | |
| default: | |
| error = -1; | |
| break; | |
| } | |
| break; | |
| case (0x60>>2): /* indexed stores */ | |
| switch (minor) { | |
| case 0x1: /* STX.W */ | |
| error = misaligned_store(regs, opcode, 0, 1); | |
| break; | |
| case 0x2: /* STX.L */ | |
| error = misaligned_store(regs, opcode, 0, 2); | |
| break; | |
| case 0x3: /* STX.Q */ | |
| error = misaligned_store(regs, opcode, 0, 3); | |
| break; | |
| default: | |
| error = -1; | |
| break; | |
| } | |
| break; | |
| case (0x94>>2): /* FLD.S */ | |
| error = misaligned_fpu_load(regs, opcode, 1, 2, 0); | |
| break; | |
| case (0x98>>2): /* FLD.P */ | |
| error = misaligned_fpu_load(regs, opcode, 1, 3, 1); | |
| break; | |
| case (0x9c>>2): /* FLD.D */ | |
| error = misaligned_fpu_load(regs, opcode, 1, 3, 0); | |
| break; | |
| case (0x1c>>2): /* floating indexed loads */ | |
| switch (minor) { | |
| case 0x8: /* FLDX.S */ | |
| error = misaligned_fpu_load(regs, opcode, 0, 2, 0); | |
| break; | |
| case 0xd: /* FLDX.P */ | |
| error = misaligned_fpu_load(regs, opcode, 0, 3, 1); | |
| break; | |
| case 0x9: /* FLDX.D */ | |
| error = misaligned_fpu_load(regs, opcode, 0, 3, 0); | |
| break; | |
| default: | |
| error = -1; | |
| break; | |
| } | |
| break; | |
| case (0xb4>>2): /* FLD.S */ | |
| error = misaligned_fpu_store(regs, opcode, 1, 2, 0); | |
| break; | |
| case (0xb8>>2): /* FLD.P */ | |
| error = misaligned_fpu_store(regs, opcode, 1, 3, 1); | |
| break; | |
| case (0xbc>>2): /* FLD.D */ | |
| error = misaligned_fpu_store(regs, opcode, 1, 3, 0); | |
| break; | |
| case (0x3c>>2): /* floating indexed stores */ | |
| switch (minor) { | |
| case 0x8: /* FSTX.S */ | |
| error = misaligned_fpu_store(regs, opcode, 0, 2, 0); | |
| break; | |
| case 0xd: /* FSTX.P */ | |
| error = misaligned_fpu_store(regs, opcode, 0, 3, 1); | |
| break; | |
| case 0x9: /* FSTX.D */ | |
| error = misaligned_fpu_store(regs, opcode, 0, 3, 0); | |
| break; | |
| default: | |
| error = -1; | |
| break; | |
| } | |
| break; | |
| default: | |
| /* Fault */ | |
| error = -1; | |
| break; | |
| } | |
| if (error < 0) { | |
| return error; | |
| } else { | |
| regs->pc += 4; /* Skip the instruction that's just been emulated */ | |
| return 0; | |
| } | |
| } | |
| static void do_unhandled_exception(int signr, char *str, unsigned long error, | |
| struct pt_regs *regs) | |
| { | |
| if (user_mode(regs)) | |
| force_sig(signr, current); | |
| die_if_no_fixup(str, regs, error); | |
| } | |
| #define DO_ERROR(signr, str, name) \ | |
| asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \ | |
| { \ | |
| do_unhandled_exception(signr, str, error_code, regs); \ | |
| } | |
| DO_ERROR(SIGILL, "illegal slot instruction", illegal_slot_inst) | |
| DO_ERROR(SIGSEGV, "address error (exec)", address_error_exec) | |
| #if defined(CONFIG_SH64_ID2815_WORKAROUND) | |
| #define OPCODE_INVALID 0 | |
| #define OPCODE_USER_VALID 1 | |
| #define OPCODE_PRIV_VALID 2 | |
| /* getcon/putcon - requires checking which control register is referenced. */ | |
| #define OPCODE_CTRL_REG 3 | |
| /* Table of valid opcodes for SHmedia mode. | |
| Form a 10-bit value by concatenating the major/minor opcodes i.e. | |
| opcode[31:26,20:16]. The 6 MSBs of this value index into the following | |
| array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to | |
| LSBs==4'b0000 etc). */ | |
| static unsigned long shmedia_opcode_table[64] = { | |
| 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015, | |
| 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000, | |
| 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000, | |
| 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000, | |
| 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, | |
| 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, | |
| 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, | |
| 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000 | |
| }; | |
| /* Workaround SH5-101 cut2 silicon defect #2815 : | |
| in some situations, inter-mode branches from SHcompact -> SHmedia | |
| which should take ITLBMISS or EXECPROT exceptions at the target | |
| falsely take RESINST at the target instead. */ | |
| void do_reserved_inst(unsigned long error_code, struct pt_regs *regs) | |
| { | |
| insn_size_t opcode = 0x6ff4fff0; /* guaranteed reserved opcode */ | |
| unsigned long pc, aligned_pc; | |
| unsigned long index, shift; | |
| unsigned long major, minor, combined; | |
| unsigned long reserved_field; | |
| int opcode_state; | |
| int get_user_error; | |
| int signr = SIGILL; | |
| char *exception_name = "reserved_instruction"; | |
| pc = regs->pc; | |
| /* SHcompact is not handled */ | |
| if (unlikely((pc & 3) == 0)) | |
| goto out; | |
| /* SHmedia : check for defect. This requires executable vmas | |
| to be readable too. */ | |
| aligned_pc = pc & ~3; | |
| if (!access_ok(VERIFY_READ, aligned_pc, sizeof(insn_size_t))) | |
| get_user_error = -EFAULT; | |
| else | |
| get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc); | |
| if (get_user_error < 0) { | |
| /* | |
| * Error trying to read opcode. This typically means a | |
| * real fault, not a RESINST any more. So change the | |
| * codes. | |
| */ | |
| exception_name = "address error (exec)"; | |
| signr = SIGSEGV; | |
| goto out; | |
| } | |
| /* These bits are currently reserved as zero in all valid opcodes */ | |
| reserved_field = opcode & 0xf; | |
| if (unlikely(reserved_field)) | |
| goto out; /* invalid opcode */ | |
| major = (opcode >> 26) & 0x3f; | |
| minor = (opcode >> 16) & 0xf; | |
| combined = (major << 4) | minor; | |
| index = major; | |
| shift = minor << 1; | |
| opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3; | |
| switch (opcode_state) { | |
| case OPCODE_INVALID: | |
| /* Trap. */ | |
| break; | |
| case OPCODE_USER_VALID: | |
| /* | |
| * Restart the instruction: the branch to the instruction | |
| * will now be from an RTE not from SHcompact so the | |
| * silicon defect won't be triggered. | |
| */ | |
| return; | |
| case OPCODE_PRIV_VALID: | |
| if (!user_mode(regs)) { | |
| /* | |
| * Should only ever get here if a module has | |
| * SHcompact code inside it. If so, the same fix | |
| * up is needed. | |
| */ | |
| return; /* same reason */ | |
| } | |
| /* | |
| * Otherwise, user mode trying to execute a privileged | |
| * instruction - fall through to trap. | |
| */ | |
| break; | |
| case OPCODE_CTRL_REG: | |
| /* If in privileged mode, return as above. */ | |
| if (!user_mode(regs)) | |
| return; | |
| /* In user mode ... */ | |
| if (combined == 0x9f) { /* GETCON */ | |
| unsigned long regno = (opcode >> 20) & 0x3f; | |
| if (regno >= 62) | |
| return; | |
| /* reserved/privileged control register => trap */ | |
| } else if (combined == 0x1bf) { /* PUTCON */ | |
| unsigned long regno = (opcode >> 4) & 0x3f; | |
| if (regno >= 62) | |
| return; | |
| /* reserved/privileged control register => trap */ | |
| } | |
| break; | |
| default: | |
| /* Fall through to trap. */ | |
| break; | |
| } | |
| out: | |
| do_unhandled_exception(signr, exception_name, error_code, regs); | |
| } | |
| #else /* CONFIG_SH64_ID2815_WORKAROUND */ | |
| /* If the workaround isn't needed, this is just a straightforward reserved | |
| instruction */ | |
| DO_ERROR(SIGILL, "reserved instruction", reserved_inst) | |
| #endif /* CONFIG_SH64_ID2815_WORKAROUND */ | |
| /* Called with interrupts disabled */ | |
| asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs) | |
| { | |
| die_if_kernel("exception", regs, ex); | |
| } | |
| asmlinkage int do_unknown_trapa(unsigned long scId, struct pt_regs *regs) | |
| { | |
| /* Syscall debug */ | |
| printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId); | |
| die_if_kernel("unknown trapa", regs, scId); | |
| return -ENOSYS; | |
| } | |
| /* Implement misaligned load/store handling for kernel (and optionally for user | |
| mode too). Limitation : only SHmedia mode code is handled - there is no | |
| handling at all for misaligned accesses occurring in SHcompact code yet. */ | |
| asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs) | |
| { | |
| if (misaligned_fixup(regs) < 0) | |
| do_unhandled_exception(SIGSEGV, "address error(load)", | |
| error_code, regs); | |
| } | |
| asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs) | |
| { | |
| if (misaligned_fixup(regs) < 0) | |
| do_unhandled_exception(SIGSEGV, "address error(store)", | |
| error_code, regs); | |
| } | |
| asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs) | |
| { | |
| u64 peek_real_address_q(u64 addr); | |
| u64 poke_real_address_q(u64 addr, u64 val); | |
| unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010; | |
| unsigned long long exp_cause; | |
| /* It's not worth ioremapping the debug module registers for the amount | |
| of access we make to them - just go direct to their physical | |
| addresses. */ | |
| exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY); | |
| if (exp_cause & ~4) | |
| printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n", | |
| (unsigned long)(exp_cause & 0xffffffff)); | |
| show_state(); | |
| /* Clear all DEBUGINT causes */ | |
| poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0); | |
| } | |
| void per_cpu_trap_init(void) | |
| { | |
| /* Nothing to do for now, VBR initialization later. */ | |
| } |