| /* | |
| * VMware Detection code. | |
| * | |
| * Copyright (C) 2008, VMware, Inc. | |
| * Author : Alok N Kataria <akataria@vmware.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for more | |
| * details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| */ | |
| #include <linux/dmi.h> | |
| #include <linux/init.h> | |
| #include <linux/export.h> | |
| #include <linux/clocksource.h> | |
| #include <asm/div64.h> | |
| #include <asm/x86_init.h> | |
| #include <asm/hypervisor.h> | |
| #include <asm/timer.h> | |
| #include <asm/apic.h> | |
| #undef pr_fmt | |
| #define pr_fmt(fmt) "vmware: " fmt | |
| #define CPUID_VMWARE_INFO_LEAF 0x40000000 | |
| #define VMWARE_HYPERVISOR_MAGIC 0x564D5868 | |
| #define VMWARE_HYPERVISOR_PORT 0x5658 | |
| #define VMWARE_PORT_CMD_GETVERSION 10 | |
| #define VMWARE_PORT_CMD_GETHZ 45 | |
| #define VMWARE_PORT_CMD_GETVCPU_INFO 68 | |
| #define VMWARE_PORT_CMD_LEGACY_X2APIC 3 | |
| #define VMWARE_PORT_CMD_VCPU_RESERVED 31 | |
| #define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \ | |
| __asm__("inl (%%dx)" : \ | |
| "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \ | |
| "0"(VMWARE_HYPERVISOR_MAGIC), \ | |
| "1"(VMWARE_PORT_CMD_##cmd), \ | |
| "2"(VMWARE_HYPERVISOR_PORT), "3"(UINT_MAX) : \ | |
| "memory"); | |
| static unsigned long vmware_tsc_khz __ro_after_init; | |
| static inline int __vmware_platform(void) | |
| { | |
| uint32_t eax, ebx, ecx, edx; | |
| VMWARE_PORT(GETVERSION, eax, ebx, ecx, edx); | |
| return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC; | |
| } | |
| static unsigned long vmware_get_tsc_khz(void) | |
| { | |
| return vmware_tsc_khz; | |
| } | |
| #ifdef CONFIG_PARAVIRT | |
| static struct cyc2ns_data vmware_cyc2ns __ro_after_init; | |
| static int vmw_sched_clock __initdata = 1; | |
| static __init int setup_vmw_sched_clock(char *s) | |
| { | |
| vmw_sched_clock = 0; | |
| return 0; | |
| } | |
| early_param("no-vmw-sched-clock", setup_vmw_sched_clock); | |
| static unsigned long long vmware_sched_clock(void) | |
| { | |
| unsigned long long ns; | |
| ns = mul_u64_u32_shr(rdtsc(), vmware_cyc2ns.cyc2ns_mul, | |
| vmware_cyc2ns.cyc2ns_shift); | |
| ns -= vmware_cyc2ns.cyc2ns_offset; | |
| return ns; | |
| } | |
| static void __init vmware_sched_clock_setup(void) | |
| { | |
| struct cyc2ns_data *d = &vmware_cyc2ns; | |
| unsigned long long tsc_now = rdtsc(); | |
| clocks_calc_mult_shift(&d->cyc2ns_mul, &d->cyc2ns_shift, | |
| vmware_tsc_khz, NSEC_PER_MSEC, 0); | |
| d->cyc2ns_offset = mul_u64_u32_shr(tsc_now, d->cyc2ns_mul, | |
| d->cyc2ns_shift); | |
| pv_time_ops.sched_clock = vmware_sched_clock; | |
| pr_info("using sched offset of %llu ns\n", d->cyc2ns_offset); | |
| } | |
| static void __init vmware_paravirt_ops_setup(void) | |
| { | |
| pv_info.name = "VMware hypervisor"; | |
| pv_cpu_ops.io_delay = paravirt_nop; | |
| if (vmware_tsc_khz && vmw_sched_clock) | |
| vmware_sched_clock_setup(); | |
| } | |
| #else | |
| #define vmware_paravirt_ops_setup() do {} while (0) | |
| #endif | |
| /* | |
| * VMware hypervisor takes care of exporting a reliable TSC to the guest. | |
| * Still, due to timing difference when running on virtual cpus, the TSC can | |
| * be marked as unstable in some cases. For example, the TSC sync check at | |
| * bootup can fail due to a marginal offset between vcpus' TSCs (though the | |
| * TSCs do not drift from each other). Also, the ACPI PM timer clocksource | |
| * is not suitable as a watchdog when running on a hypervisor because the | |
| * kernel may miss a wrap of the counter if the vcpu is descheduled for a | |
| * long time. To skip these checks at runtime we set these capability bits, | |
| * so that the kernel could just trust the hypervisor with providing a | |
| * reliable virtual TSC that is suitable for timekeeping. | |
| */ | |
| static void __init vmware_set_capabilities(void) | |
| { | |
| setup_force_cpu_cap(X86_FEATURE_CONSTANT_TSC); | |
| setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE); | |
| } | |
| static void __init vmware_platform_setup(void) | |
| { | |
| uint32_t eax, ebx, ecx, edx; | |
| uint64_t lpj, tsc_khz; | |
| VMWARE_PORT(GETHZ, eax, ebx, ecx, edx); | |
| if (ebx != UINT_MAX) { | |
| lpj = tsc_khz = eax | (((uint64_t)ebx) << 32); | |
| do_div(tsc_khz, 1000); | |
| WARN_ON(tsc_khz >> 32); | |
| pr_info("TSC freq read from hypervisor : %lu.%03lu MHz\n", | |
| (unsigned long) tsc_khz / 1000, | |
| (unsigned long) tsc_khz % 1000); | |
| if (!preset_lpj) { | |
| do_div(lpj, HZ); | |
| preset_lpj = lpj; | |
| } | |
| vmware_tsc_khz = tsc_khz; | |
| x86_platform.calibrate_tsc = vmware_get_tsc_khz; | |
| x86_platform.calibrate_cpu = vmware_get_tsc_khz; | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| /* Skip lapic calibration since we know the bus frequency. */ | |
| lapic_timer_frequency = ecx / HZ; | |
| pr_info("Host bus clock speed read from hypervisor : %u Hz\n", | |
| ecx); | |
| #endif | |
| } else { | |
| pr_warn("Failed to get TSC freq from the hypervisor\n"); | |
| } | |
| vmware_paravirt_ops_setup(); | |
| #ifdef CONFIG_X86_IO_APIC | |
| no_timer_check = 1; | |
| #endif | |
| vmware_set_capabilities(); | |
| } | |
| /* | |
| * While checking the dmi string information, just checking the product | |
| * serial key should be enough, as this will always have a VMware | |
| * specific string when running under VMware hypervisor. | |
| */ | |
| static uint32_t __init vmware_platform(void) | |
| { | |
| if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) { | |
| unsigned int eax; | |
| unsigned int hyper_vendor_id[3]; | |
| cpuid(CPUID_VMWARE_INFO_LEAF, &eax, &hyper_vendor_id[0], | |
| &hyper_vendor_id[1], &hyper_vendor_id[2]); | |
| if (!memcmp(hyper_vendor_id, "VMwareVMware", 12)) | |
| return CPUID_VMWARE_INFO_LEAF; | |
| } else if (dmi_available && dmi_name_in_serial("VMware") && | |
| __vmware_platform()) | |
| return 1; | |
| return 0; | |
| } | |
| /* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */ | |
| static bool __init vmware_legacy_x2apic_available(void) | |
| { | |
| uint32_t eax, ebx, ecx, edx; | |
| VMWARE_PORT(GETVCPU_INFO, eax, ebx, ecx, edx); | |
| return (eax & (1 << VMWARE_PORT_CMD_VCPU_RESERVED)) == 0 && | |
| (eax & (1 << VMWARE_PORT_CMD_LEGACY_X2APIC)) != 0; | |
| } | |
| const __refconst struct hypervisor_x86 x86_hyper_vmware = { | |
| .name = "VMware", | |
| .detect = vmware_platform, | |
| .init_platform = vmware_platform_setup, | |
| .x2apic_available = vmware_legacy_x2apic_available, | |
| }; | |
| EXPORT_SYMBOL(x86_hyper_vmware); |