| /* |
| * Amlogic SD/eMMC driver for the GX/S905 family SoCs |
| * |
| * Copyright (c) 2016 BayLibre, SAS. |
| * Author: Kevin Hilman <khilman@baylibre.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/ioport.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/slot-gpio.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitfield.h> |
| |
| #define DRIVER_NAME "meson-gx-mmc" |
| |
| #define SD_EMMC_CLOCK 0x0 |
| #define CLK_DIV_MASK GENMASK(5, 0) |
| #define CLK_SRC_MASK GENMASK(7, 6) |
| #define CLK_CORE_PHASE_MASK GENMASK(9, 8) |
| #define CLK_TX_PHASE_MASK GENMASK(11, 10) |
| #define CLK_RX_PHASE_MASK GENMASK(13, 12) |
| #define CLK_TX_DELAY_MASK GENMASK(19, 16) |
| #define CLK_RX_DELAY_MASK GENMASK(23, 20) |
| #define CLK_DELAY_STEP_PS 200 |
| #define CLK_PHASE_STEP 30 |
| #define CLK_PHASE_POINT_NUM (360 / CLK_PHASE_STEP) |
| #define CLK_ALWAYS_ON BIT(24) |
| |
| #define SD_EMMC_DELAY 0x4 |
| #define SD_EMMC_ADJUST 0x8 |
| #define SD_EMMC_CALOUT 0x10 |
| #define SD_EMMC_START 0x40 |
| #define START_DESC_INIT BIT(0) |
| #define START_DESC_BUSY BIT(1) |
| #define START_DESC_ADDR_MASK GENMASK(31, 2) |
| |
| #define SD_EMMC_CFG 0x44 |
| #define CFG_BUS_WIDTH_MASK GENMASK(1, 0) |
| #define CFG_BUS_WIDTH_1 0x0 |
| #define CFG_BUS_WIDTH_4 0x1 |
| #define CFG_BUS_WIDTH_8 0x2 |
| #define CFG_DDR BIT(2) |
| #define CFG_BLK_LEN_MASK GENMASK(7, 4) |
| #define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8) |
| #define CFG_RC_CC_MASK GENMASK(15, 12) |
| #define CFG_STOP_CLOCK BIT(22) |
| #define CFG_CLK_ALWAYS_ON BIT(18) |
| #define CFG_CHK_DS BIT(20) |
| #define CFG_AUTO_CLK BIT(23) |
| |
| #define SD_EMMC_STATUS 0x48 |
| #define STATUS_BUSY BIT(31) |
| #define STATUS_DATI GENMASK(23, 16) |
| |
| #define SD_EMMC_IRQ_EN 0x4c |
| #define IRQ_RXD_ERR_MASK GENMASK(7, 0) |
| #define IRQ_TXD_ERR BIT(8) |
| #define IRQ_DESC_ERR BIT(9) |
| #define IRQ_RESP_ERR BIT(10) |
| #define IRQ_CRC_ERR \ |
| (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR) |
| #define IRQ_RESP_TIMEOUT BIT(11) |
| #define IRQ_DESC_TIMEOUT BIT(12) |
| #define IRQ_TIMEOUTS \ |
| (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT) |
| #define IRQ_END_OF_CHAIN BIT(13) |
| #define IRQ_RESP_STATUS BIT(14) |
| #define IRQ_SDIO BIT(15) |
| #define IRQ_EN_MASK \ |
| (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\ |
| IRQ_SDIO) |
| |
| #define SD_EMMC_CMD_CFG 0x50 |
| #define SD_EMMC_CMD_ARG 0x54 |
| #define SD_EMMC_CMD_DAT 0x58 |
| #define SD_EMMC_CMD_RSP 0x5c |
| #define SD_EMMC_CMD_RSP1 0x60 |
| #define SD_EMMC_CMD_RSP2 0x64 |
| #define SD_EMMC_CMD_RSP3 0x68 |
| |
| #define SD_EMMC_RXD 0x94 |
| #define SD_EMMC_TXD 0x94 |
| #define SD_EMMC_LAST_REG SD_EMMC_TXD |
| |
| #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */ |
| #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */ |
| #define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */ |
| #define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */ |
| #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ |
| #define SD_EMMC_DESC_BUF_LEN PAGE_SIZE |
| |
| #define SD_EMMC_PRE_REQ_DONE BIT(0) |
| #define SD_EMMC_DESC_CHAIN_MODE BIT(1) |
| |
| #define MUX_CLK_NUM_PARENTS 2 |
| |
| struct sd_emmc_desc { |
| u32 cmd_cfg; |
| u32 cmd_arg; |
| u32 cmd_data; |
| u32 cmd_resp; |
| }; |
| |
| struct meson_host { |
| struct device *dev; |
| struct mmc_host *mmc; |
| struct mmc_command *cmd; |
| |
| spinlock_t lock; |
| void __iomem *regs; |
| struct clk *core_clk; |
| struct clk *mmc_clk; |
| struct clk *rx_clk; |
| struct clk *tx_clk; |
| unsigned long req_rate; |
| |
| struct pinctrl *pinctrl; |
| struct pinctrl_state *pins_default; |
| struct pinctrl_state *pins_clk_gate; |
| |
| unsigned int bounce_buf_size; |
| void *bounce_buf; |
| dma_addr_t bounce_dma_addr; |
| struct sd_emmc_desc *descs; |
| dma_addr_t descs_dma_addr; |
| |
| bool vqmmc_enabled; |
| }; |
| |
| #define CMD_CFG_LENGTH_MASK GENMASK(8, 0) |
| #define CMD_CFG_BLOCK_MODE BIT(9) |
| #define CMD_CFG_R1B BIT(10) |
| #define CMD_CFG_END_OF_CHAIN BIT(11) |
| #define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12) |
| #define CMD_CFG_NO_RESP BIT(16) |
| #define CMD_CFG_NO_CMD BIT(17) |
| #define CMD_CFG_DATA_IO BIT(18) |
| #define CMD_CFG_DATA_WR BIT(19) |
| #define CMD_CFG_RESP_NOCRC BIT(20) |
| #define CMD_CFG_RESP_128 BIT(21) |
| #define CMD_CFG_RESP_NUM BIT(22) |
| #define CMD_CFG_DATA_NUM BIT(23) |
| #define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24) |
| #define CMD_CFG_ERROR BIT(30) |
| #define CMD_CFG_OWNER BIT(31) |
| |
| #define CMD_DATA_MASK GENMASK(31, 2) |
| #define CMD_DATA_BIG_ENDIAN BIT(1) |
| #define CMD_DATA_SRAM BIT(0) |
| #define CMD_RESP_MASK GENMASK(31, 1) |
| #define CMD_RESP_SRAM BIT(0) |
| |
| struct meson_mmc_phase { |
| struct clk_hw hw; |
| void __iomem *reg; |
| unsigned long phase_mask; |
| unsigned long delay_mask; |
| unsigned int delay_step_ps; |
| }; |
| |
| #define to_meson_mmc_phase(_hw) container_of(_hw, struct meson_mmc_phase, hw) |
| |
| static int meson_mmc_clk_get_phase(struct clk_hw *hw) |
| { |
| struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw); |
| unsigned int phase_num = 1 << hweight_long(mmc->phase_mask); |
| unsigned long period_ps, p, d; |
| int degrees; |
| u32 val; |
| |
| val = readl(mmc->reg); |
| p = (val & mmc->phase_mask) >> __ffs(mmc->phase_mask); |
| degrees = p * 360 / phase_num; |
| |
| if (mmc->delay_mask) { |
| period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000, |
| clk_get_rate(hw->clk)); |
| d = (val & mmc->delay_mask) >> __ffs(mmc->delay_mask); |
| degrees += d * mmc->delay_step_ps * 360 / period_ps; |
| degrees %= 360; |
| } |
| |
| return degrees; |
| } |
| |
| static void meson_mmc_apply_phase_delay(struct meson_mmc_phase *mmc, |
| unsigned int phase, |
| unsigned int delay) |
| { |
| u32 val; |
| |
| val = readl(mmc->reg); |
| val &= ~mmc->phase_mask; |
| val |= phase << __ffs(mmc->phase_mask); |
| |
| if (mmc->delay_mask) { |
| val &= ~mmc->delay_mask; |
| val |= delay << __ffs(mmc->delay_mask); |
| } |
| |
| writel(val, mmc->reg); |
| } |
| |
| static int meson_mmc_clk_set_phase(struct clk_hw *hw, int degrees) |
| { |
| struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw); |
| unsigned int phase_num = 1 << hweight_long(mmc->phase_mask); |
| unsigned long period_ps, d = 0, r; |
| uint64_t p; |
| |
| p = degrees % 360; |
| |
| if (!mmc->delay_mask) { |
| p = DIV_ROUND_CLOSEST_ULL(p, 360 / phase_num); |
| } else { |
| period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000, |
| clk_get_rate(hw->clk)); |
| |
| /* First compute the phase index (p), the remainder (r) is the |
| * part we'll try to acheive using the delays (d). |
| */ |
| r = do_div(p, 360 / phase_num); |
| d = DIV_ROUND_CLOSEST(r * period_ps, |
| 360 * mmc->delay_step_ps); |
| d = min(d, mmc->delay_mask >> __ffs(mmc->delay_mask)); |
| } |
| |
| meson_mmc_apply_phase_delay(mmc, p, d); |
| return 0; |
| } |
| |
| static const struct clk_ops meson_mmc_clk_phase_ops = { |
| .get_phase = meson_mmc_clk_get_phase, |
| .set_phase = meson_mmc_clk_set_phase, |
| }; |
| |
| static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data) |
| { |
| unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC; |
| |
| if (!timeout) |
| return SD_EMMC_CMD_TIMEOUT_DATA; |
| |
| timeout = roundup_pow_of_two(timeout); |
| |
| return min(timeout, 32768U); /* max. 2^15 ms */ |
| } |
| |
| static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) |
| { |
| if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error) |
| return cmd->mrq->cmd; |
| else if (mmc_op_multi(cmd->opcode) && |
| (!cmd->mrq->sbc || cmd->error || cmd->data->error)) |
| return cmd->mrq->stop; |
| else |
| return NULL; |
| } |
| |
| static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, |
| struct mmc_request *mrq) |
| { |
| struct mmc_data *data = mrq->data; |
| struct scatterlist *sg; |
| int i; |
| bool use_desc_chain_mode = true; |
| |
| /* |
| * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been |
| * reported. For some strange reason this occurs in descriptor |
| * chain mode only. So let's fall back to bounce buffer mode |
| * for command SD_IO_RW_EXTENDED. |
| */ |
| if (mrq->cmd->opcode == SD_IO_RW_EXTENDED) |
| return; |
| |
| for_each_sg(data->sg, sg, data->sg_len, i) |
| /* check for 8 byte alignment */ |
| if (sg->offset & 7) { |
| WARN_ONCE(1, "unaligned scatterlist buffer\n"); |
| use_desc_chain_mode = false; |
| break; |
| } |
| |
| if (use_desc_chain_mode) |
| data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE; |
| } |
| |
| static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data) |
| { |
| return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE; |
| } |
| |
| static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data) |
| { |
| return data && data->flags & MMC_DATA_READ && |
| !meson_mmc_desc_chain_mode(data); |
| } |
| |
| static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct mmc_data *data = mrq->data; |
| |
| if (!data) |
| return; |
| |
| meson_mmc_get_transfer_mode(mmc, mrq); |
| data->host_cookie |= SD_EMMC_PRE_REQ_DONE; |
| |
| if (!meson_mmc_desc_chain_mode(data)) |
| return; |
| |
| data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, |
| mmc_get_dma_dir(data)); |
| if (!data->sg_count) |
| dev_err(mmc_dev(mmc), "dma_map_sg failed"); |
| } |
| |
| static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, |
| int err) |
| { |
| struct mmc_data *data = mrq->data; |
| |
| if (data && meson_mmc_desc_chain_mode(data) && data->sg_count) |
| dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, |
| mmc_get_dma_dir(data)); |
| } |
| |
| static bool meson_mmc_timing_is_ddr(struct mmc_ios *ios) |
| { |
| if (ios->timing == MMC_TIMING_MMC_DDR52 || |
| ios->timing == MMC_TIMING_UHS_DDR50 || |
| ios->timing == MMC_TIMING_MMC_HS400) |
| return true; |
| |
| return false; |
| } |
| |
| /* |
| * Gating the clock on this controller is tricky. It seems the mmc clock |
| * is also used by the controller. It may crash during some operation if the |
| * clock is stopped. The safest thing to do, whenever possible, is to keep |
| * clock running at stop it at the pad using the pinmux. |
| */ |
| static void meson_mmc_clk_gate(struct meson_host *host) |
| { |
| u32 cfg; |
| |
| if (host->pins_clk_gate) { |
| pinctrl_select_state(host->pinctrl, host->pins_clk_gate); |
| } else { |
| /* |
| * If the pinmux is not provided - default to the classic and |
| * unsafe method |
| */ |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| cfg |= CFG_STOP_CLOCK; |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| } |
| |
| static void meson_mmc_clk_ungate(struct meson_host *host) |
| { |
| u32 cfg; |
| |
| if (host->pins_clk_gate) |
| pinctrl_select_state(host->pinctrl, host->pins_default); |
| |
| /* Make sure the clock is not stopped in the controller */ |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| cfg &= ~CFG_STOP_CLOCK; |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| |
| static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios) |
| { |
| struct mmc_host *mmc = host->mmc; |
| unsigned long rate = ios->clock; |
| int ret; |
| u32 cfg; |
| |
| /* DDR modes require higher module clock */ |
| if (meson_mmc_timing_is_ddr(ios)) |
| rate <<= 1; |
| |
| /* Same request - bail-out */ |
| if (host->req_rate == rate) |
| return 0; |
| |
| /* stop clock */ |
| meson_mmc_clk_gate(host); |
| host->req_rate = 0; |
| |
| if (!rate) { |
| mmc->actual_clock = 0; |
| /* return with clock being stopped */ |
| return 0; |
| } |
| |
| /* Stop the clock during rate change to avoid glitches */ |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| cfg |= CFG_STOP_CLOCK; |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| |
| ret = clk_set_rate(host->mmc_clk, rate); |
| if (ret) { |
| dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n", |
| rate, ret); |
| return ret; |
| } |
| |
| host->req_rate = rate; |
| mmc->actual_clock = clk_get_rate(host->mmc_clk); |
| |
| /* We should report the real output frequency of the controller */ |
| if (meson_mmc_timing_is_ddr(ios)) |
| mmc->actual_clock >>= 1; |
| |
| dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock); |
| if (ios->clock != mmc->actual_clock) |
| dev_dbg(host->dev, "requested rate was %u\n", ios->clock); |
| |
| /* (re)start clock */ |
| meson_mmc_clk_ungate(host); |
| |
| return 0; |
| } |
| |
| /* |
| * The SD/eMMC IP block has an internal mux and divider used for |
| * generating the MMC clock. Use the clock framework to create and |
| * manage these clocks. |
| */ |
| static int meson_mmc_clk_init(struct meson_host *host) |
| { |
| struct clk_init_data init; |
| struct clk_mux *mux; |
| struct clk_divider *div; |
| struct meson_mmc_phase *core, *tx, *rx; |
| struct clk *clk; |
| char clk_name[32]; |
| int i, ret = 0; |
| const char *mux_parent_names[MUX_CLK_NUM_PARENTS]; |
| const char *clk_parent[1]; |
| u32 clk_reg; |
| |
| /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ |
| clk_reg = 0; |
| clk_reg |= CLK_ALWAYS_ON; |
| clk_reg |= CLK_DIV_MASK; |
| writel(clk_reg, host->regs + SD_EMMC_CLOCK); |
| |
| /* get the mux parents */ |
| for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { |
| struct clk *clk; |
| char name[16]; |
| |
| snprintf(name, sizeof(name), "clkin%d", i); |
| clk = devm_clk_get(host->dev, name); |
| if (IS_ERR(clk)) { |
| if (clk != ERR_PTR(-EPROBE_DEFER)) |
| dev_err(host->dev, "Missing clock %s\n", name); |
| return PTR_ERR(clk); |
| } |
| |
| mux_parent_names[i] = __clk_get_name(clk); |
| } |
| |
| /* create the mux */ |
| mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL); |
| if (!mux) |
| return -ENOMEM; |
| |
| snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &clk_mux_ops; |
| init.flags = 0; |
| init.parent_names = mux_parent_names; |
| init.num_parents = MUX_CLK_NUM_PARENTS; |
| |
| mux->reg = host->regs + SD_EMMC_CLOCK; |
| mux->shift = __ffs(CLK_SRC_MASK); |
| mux->mask = CLK_SRC_MASK >> mux->shift; |
| mux->hw.init = &init; |
| |
| clk = devm_clk_register(host->dev, &mux->hw); |
| if (WARN_ON(IS_ERR(clk))) |
| return PTR_ERR(clk); |
| |
| /* create the divider */ |
| div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL); |
| if (!div) |
| return -ENOMEM; |
| |
| snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &clk_divider_ops; |
| init.flags = CLK_SET_RATE_PARENT; |
| clk_parent[0] = __clk_get_name(clk); |
| init.parent_names = clk_parent; |
| init.num_parents = 1; |
| |
| div->reg = host->regs + SD_EMMC_CLOCK; |
| div->shift = __ffs(CLK_DIV_MASK); |
| div->width = __builtin_popcountl(CLK_DIV_MASK); |
| div->hw.init = &init; |
| div->flags = CLK_DIVIDER_ONE_BASED; |
| |
| clk = devm_clk_register(host->dev, &div->hw); |
| if (WARN_ON(IS_ERR(clk))) |
| return PTR_ERR(clk); |
| |
| /* create the mmc core clock */ |
| core = devm_kzalloc(host->dev, sizeof(*core), GFP_KERNEL); |
| if (!core) |
| return -ENOMEM; |
| |
| snprintf(clk_name, sizeof(clk_name), "%s#core", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &meson_mmc_clk_phase_ops; |
| init.flags = CLK_SET_RATE_PARENT; |
| clk_parent[0] = __clk_get_name(clk); |
| init.parent_names = clk_parent; |
| init.num_parents = 1; |
| |
| core->reg = host->regs + SD_EMMC_CLOCK; |
| core->phase_mask = CLK_CORE_PHASE_MASK; |
| core->hw.init = &init; |
| |
| host->mmc_clk = devm_clk_register(host->dev, &core->hw); |
| if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk))) |
| return PTR_ERR(host->mmc_clk); |
| |
| /* create the mmc tx clock */ |
| tx = devm_kzalloc(host->dev, sizeof(*tx), GFP_KERNEL); |
| if (!tx) |
| return -ENOMEM; |
| |
| snprintf(clk_name, sizeof(clk_name), "%s#tx", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &meson_mmc_clk_phase_ops; |
| init.flags = 0; |
| clk_parent[0] = __clk_get_name(host->mmc_clk); |
| init.parent_names = clk_parent; |
| init.num_parents = 1; |
| |
| tx->reg = host->regs + SD_EMMC_CLOCK; |
| tx->phase_mask = CLK_TX_PHASE_MASK; |
| tx->delay_mask = CLK_TX_DELAY_MASK; |
| tx->delay_step_ps = CLK_DELAY_STEP_PS; |
| tx->hw.init = &init; |
| |
| host->tx_clk = devm_clk_register(host->dev, &tx->hw); |
| if (WARN_ON(PTR_ERR_OR_ZERO(host->tx_clk))) |
| return PTR_ERR(host->tx_clk); |
| |
| /* create the mmc rx clock */ |
| rx = devm_kzalloc(host->dev, sizeof(*rx), GFP_KERNEL); |
| if (!rx) |
| return -ENOMEM; |
| |
| snprintf(clk_name, sizeof(clk_name), "%s#rx", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &meson_mmc_clk_phase_ops; |
| init.flags = 0; |
| clk_parent[0] = __clk_get_name(host->mmc_clk); |
| init.parent_names = clk_parent; |
| init.num_parents = 1; |
| |
| rx->reg = host->regs + SD_EMMC_CLOCK; |
| rx->phase_mask = CLK_RX_PHASE_MASK; |
| rx->delay_mask = CLK_RX_DELAY_MASK; |
| rx->delay_step_ps = CLK_DELAY_STEP_PS; |
| rx->hw.init = &init; |
| |
| host->rx_clk = devm_clk_register(host->dev, &rx->hw); |
| if (WARN_ON(PTR_ERR_OR_ZERO(host->rx_clk))) |
| return PTR_ERR(host->rx_clk); |
| |
| /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ |
| host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000); |
| ret = clk_set_rate(host->mmc_clk, host->mmc->f_min); |
| if (ret) |
| return ret; |
| |
| /* |
| * Set phases : These values are mostly the datasheet recommended ones |
| * except for the Tx phase. Datasheet recommends 180 but some cards |
| * fail at initialisation with it. 270 works just fine, it fixes these |
| * initialisation issues and enable eMMC DDR52 mode. |
| */ |
| clk_set_phase(host->mmc_clk, 180); |
| clk_set_phase(host->tx_clk, 270); |
| clk_set_phase(host->rx_clk, 0); |
| |
| return clk_prepare_enable(host->mmc_clk); |
| } |
| |
| static void meson_mmc_shift_map(unsigned long *map, unsigned long shift) |
| { |
| DECLARE_BITMAP(left, CLK_PHASE_POINT_NUM); |
| DECLARE_BITMAP(right, CLK_PHASE_POINT_NUM); |
| |
| /* |
| * shift the bitmap right and reintroduce the dropped bits on the left |
| * of the bitmap |
| */ |
| bitmap_shift_right(right, map, shift, CLK_PHASE_POINT_NUM); |
| bitmap_shift_left(left, map, CLK_PHASE_POINT_NUM - shift, |
| CLK_PHASE_POINT_NUM); |
| bitmap_or(map, left, right, CLK_PHASE_POINT_NUM); |
| } |
| |
| static void meson_mmc_find_next_region(unsigned long *map, |
| unsigned long *start, |
| unsigned long *stop) |
| { |
| *start = find_next_bit(map, CLK_PHASE_POINT_NUM, *start); |
| *stop = find_next_zero_bit(map, CLK_PHASE_POINT_NUM, *start); |
| } |
| |
| static int meson_mmc_find_tuning_point(unsigned long *test) |
| { |
| unsigned long shift, stop, offset = 0, start = 0, size = 0; |
| |
| /* Get the all good/all bad situation out the way */ |
| if (bitmap_full(test, CLK_PHASE_POINT_NUM)) |
| return 0; /* All points are good so point 0 will do */ |
| else if (bitmap_empty(test, CLK_PHASE_POINT_NUM)) |
| return -EIO; /* No successful tuning point */ |
| |
| /* |
| * Now we know there is a least one region find. Make sure it does |
| * not wrap by the shifting the bitmap if necessary |
| */ |
| shift = find_first_zero_bit(test, CLK_PHASE_POINT_NUM); |
| if (shift != 0) |
| meson_mmc_shift_map(test, shift); |
| |
| while (start < CLK_PHASE_POINT_NUM) { |
| meson_mmc_find_next_region(test, &start, &stop); |
| |
| if ((stop - start) > size) { |
| offset = start; |
| size = stop - start; |
| } |
| |
| start = stop; |
| } |
| |
| /* Get the center point of the region */ |
| offset += (size / 2); |
| |
| /* Shift the result back */ |
| offset = (offset + shift) % CLK_PHASE_POINT_NUM; |
| |
| return offset; |
| } |
| |
| static int meson_mmc_clk_phase_tuning(struct mmc_host *mmc, u32 opcode, |
| struct clk *clk) |
| { |
| int point, ret; |
| DECLARE_BITMAP(test, CLK_PHASE_POINT_NUM); |
| |
| dev_dbg(mmc_dev(mmc), "%s phase/delay tunning...\n", |
| __clk_get_name(clk)); |
| bitmap_zero(test, CLK_PHASE_POINT_NUM); |
| |
| /* Explore tuning points */ |
| for (point = 0; point < CLK_PHASE_POINT_NUM; point++) { |
| clk_set_phase(clk, point * CLK_PHASE_STEP); |
| ret = mmc_send_tuning(mmc, opcode, NULL); |
| if (!ret) |
| set_bit(point, test); |
| } |
| |
| /* Find the optimal tuning point and apply it */ |
| point = meson_mmc_find_tuning_point(test); |
| if (point < 0) |
| return point; /* tuning failed */ |
| |
| clk_set_phase(clk, point * CLK_PHASE_STEP); |
| dev_dbg(mmc_dev(mmc), "success with phase: %d\n", |
| clk_get_phase(clk)); |
| return 0; |
| } |
| |
| static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| int ret; |
| |
| /* |
| * If this is the initial tuning, try to get a sane Rx starting |
| * phase before doing the actual tuning. |
| */ |
| if (!mmc->doing_retune) { |
| ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); |
| |
| if (ret) |
| return ret; |
| } |
| |
| ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->tx_clk); |
| if (ret) |
| return ret; |
| |
| return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk); |
| } |
| |
| static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| u32 bus_width, val; |
| int err; |
| |
| /* |
| * GPIO regulator, only controls switching between 1v8 and |
| * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON. |
| */ |
| switch (ios->power_mode) { |
| case MMC_POWER_OFF: |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); |
| |
| if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { |
| regulator_disable(mmc->supply.vqmmc); |
| host->vqmmc_enabled = false; |
| } |
| |
| break; |
| |
| case MMC_POWER_UP: |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); |
| |
| /* Reset phases */ |
| clk_set_phase(host->rx_clk, 0); |
| clk_set_phase(host->tx_clk, 270); |
| |
| break; |
| |
| case MMC_POWER_ON: |
| if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { |
| int ret = regulator_enable(mmc->supply.vqmmc); |
| |
| if (ret < 0) |
| dev_err(host->dev, |
| "failed to enable vqmmc regulator\n"); |
| else |
| host->vqmmc_enabled = true; |
| } |
| |
| break; |
| } |
| |
| /* Bus width */ |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_1: |
| bus_width = CFG_BUS_WIDTH_1; |
| break; |
| case MMC_BUS_WIDTH_4: |
| bus_width = CFG_BUS_WIDTH_4; |
| break; |
| case MMC_BUS_WIDTH_8: |
| bus_width = CFG_BUS_WIDTH_8; |
| break; |
| default: |
| dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n", |
| ios->bus_width); |
| bus_width = CFG_BUS_WIDTH_4; |
| } |
| |
| val = readl(host->regs + SD_EMMC_CFG); |
| val &= ~CFG_BUS_WIDTH_MASK; |
| val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width); |
| |
| val &= ~CFG_DDR; |
| if (meson_mmc_timing_is_ddr(ios)) |
| val |= CFG_DDR; |
| |
| val &= ~CFG_CHK_DS; |
| if (ios->timing == MMC_TIMING_MMC_HS400) |
| val |= CFG_CHK_DS; |
| |
| err = meson_mmc_clk_set(host, ios); |
| if (err) |
| dev_err(host->dev, "Failed to set clock: %d\n,", err); |
| |
| writel(val, host->regs + SD_EMMC_CFG); |
| dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val); |
| } |
| |
| static void meson_mmc_request_done(struct mmc_host *mmc, |
| struct mmc_request *mrq) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| |
| host->cmd = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| u32 cfg, blksz_old; |
| |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg); |
| |
| if (!is_power_of_2(blksz)) |
| dev_err(host->dev, "blksz %u is not a power of 2\n", blksz); |
| |
| blksz = ilog2(blksz); |
| |
| /* check if block-size matches, if not update */ |
| if (blksz == blksz_old) |
| return; |
| |
| dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__, |
| blksz_old, blksz); |
| |
| cfg &= ~CFG_BLK_LEN_MASK; |
| cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz); |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| |
| static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg) |
| { |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) |
| *cmd_cfg |= CMD_CFG_RESP_128; |
| *cmd_cfg |= CMD_CFG_RESP_NUM; |
| |
| if (!(cmd->flags & MMC_RSP_CRC)) |
| *cmd_cfg |= CMD_CFG_RESP_NOCRC; |
| |
| if (cmd->flags & MMC_RSP_BUSY) |
| *cmd_cfg |= CMD_CFG_R1B; |
| } else { |
| *cmd_cfg |= CMD_CFG_NO_RESP; |
| } |
| } |
| |
| static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| struct sd_emmc_desc *desc = host->descs; |
| struct mmc_data *data = host->cmd->data; |
| struct scatterlist *sg; |
| u32 start; |
| int i; |
| |
| if (data->flags & MMC_DATA_WRITE) |
| cmd_cfg |= CMD_CFG_DATA_WR; |
| |
| if (data->blocks > 1) { |
| cmd_cfg |= CMD_CFG_BLOCK_MODE; |
| meson_mmc_set_blksz(mmc, data->blksz); |
| } |
| |
| for_each_sg(data->sg, sg, data->sg_count, i) { |
| unsigned int len = sg_dma_len(sg); |
| |
| if (data->blocks > 1) |
| len /= data->blksz; |
| |
| desc[i].cmd_cfg = cmd_cfg; |
| desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len); |
| if (i > 0) |
| desc[i].cmd_cfg |= CMD_CFG_NO_CMD; |
| desc[i].cmd_arg = host->cmd->arg; |
| desc[i].cmd_resp = 0; |
| desc[i].cmd_data = sg_dma_address(sg); |
| } |
| desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; |
| |
| dma_wmb(); /* ensure descriptor is written before kicked */ |
| start = host->descs_dma_addr | START_DESC_BUSY; |
| writel(start, host->regs + SD_EMMC_START); |
| } |
| |
| static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| struct mmc_data *data = cmd->data; |
| u32 cmd_cfg = 0, cmd_data = 0; |
| unsigned int xfer_bytes = 0; |
| |
| /* Setup descriptors */ |
| dma_rmb(); |
| |
| host->cmd = cmd; |
| |
| cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode); |
| cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ |
| |
| meson_mmc_set_response_bits(cmd, &cmd_cfg); |
| |
| /* data? */ |
| if (data) { |
| data->bytes_xfered = 0; |
| cmd_cfg |= CMD_CFG_DATA_IO; |
| cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK, |
| ilog2(meson_mmc_get_timeout_msecs(data))); |
| |
| if (meson_mmc_desc_chain_mode(data)) { |
| meson_mmc_desc_chain_transfer(mmc, cmd_cfg); |
| return; |
| } |
| |
| if (data->blocks > 1) { |
| cmd_cfg |= CMD_CFG_BLOCK_MODE; |
| cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, |
| data->blocks); |
| meson_mmc_set_blksz(mmc, data->blksz); |
| } else { |
| cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz); |
| } |
| |
| xfer_bytes = data->blksz * data->blocks; |
| if (data->flags & MMC_DATA_WRITE) { |
| cmd_cfg |= CMD_CFG_DATA_WR; |
| WARN_ON(xfer_bytes > host->bounce_buf_size); |
| sg_copy_to_buffer(data->sg, data->sg_len, |
| host->bounce_buf, xfer_bytes); |
| dma_wmb(); |
| } |
| |
| cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; |
| } else { |
| cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK, |
| ilog2(SD_EMMC_CMD_TIMEOUT)); |
| } |
| |
| /* Last descriptor */ |
| cmd_cfg |= CMD_CFG_END_OF_CHAIN; |
| writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG); |
| writel(cmd_data, host->regs + SD_EMMC_CMD_DAT); |
| writel(0, host->regs + SD_EMMC_CMD_RSP); |
| wmb(); /* ensure descriptor is written before kicked */ |
| writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG); |
| } |
| |
| static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| bool needs_pre_post_req = mrq->data && |
| !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE); |
| |
| if (needs_pre_post_req) { |
| meson_mmc_get_transfer_mode(mmc, mrq); |
| if (!meson_mmc_desc_chain_mode(mrq->data)) |
| needs_pre_post_req = false; |
| } |
| |
| if (needs_pre_post_req) |
| meson_mmc_pre_req(mmc, mrq); |
| |
| /* Stop execution */ |
| writel(0, host->regs + SD_EMMC_START); |
| |
| meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd); |
| |
| if (needs_pre_post_req) |
| meson_mmc_post_req(mmc, mrq, 0); |
| } |
| |
| static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| |
| if (cmd->flags & MMC_RSP_136) { |
| cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3); |
| cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2); |
| cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1); |
| cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP); |
| } else if (cmd->flags & MMC_RSP_PRESENT) { |
| cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP); |
| } |
| } |
| |
| static irqreturn_t meson_mmc_irq(int irq, void *dev_id) |
| { |
| struct meson_host *host = dev_id; |
| struct mmc_command *cmd; |
| struct mmc_data *data; |
| u32 irq_en, status, raw_status; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (WARN_ON(!host) || WARN_ON(!host->cmd)) |
| return IRQ_NONE; |
| |
| spin_lock(&host->lock); |
| |
| cmd = host->cmd; |
| data = cmd->data; |
| irq_en = readl(host->regs + SD_EMMC_IRQ_EN); |
| raw_status = readl(host->regs + SD_EMMC_STATUS); |
| status = raw_status & irq_en; |
| |
| cmd->error = 0; |
| if (status & IRQ_CRC_ERR) { |
| dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status); |
| cmd->error = -EILSEQ; |
| ret = IRQ_HANDLED; |
| goto out; |
| } |
| |
| if (status & IRQ_TIMEOUTS) { |
| dev_dbg(host->dev, "Timeout - status 0x%08x\n", status); |
| cmd->error = -ETIMEDOUT; |
| ret = IRQ_HANDLED; |
| goto out; |
| } |
| |
| meson_mmc_read_resp(host->mmc, cmd); |
| |
| if (status & IRQ_SDIO) { |
| dev_dbg(host->dev, "IRQ: SDIO TODO.\n"); |
| ret = IRQ_HANDLED; |
| } |
| |
| if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { |
| if (data && !cmd->error) |
| data->bytes_xfered = data->blksz * data->blocks; |
| if (meson_mmc_bounce_buf_read(data) || |
| meson_mmc_get_next_command(cmd)) |
| ret = IRQ_WAKE_THREAD; |
| else |
| ret = IRQ_HANDLED; |
| } |
| |
| out: |
| /* ack all enabled interrupts */ |
| writel(irq_en, host->regs + SD_EMMC_STATUS); |
| |
| if (ret == IRQ_HANDLED) |
| meson_mmc_request_done(host->mmc, cmd->mrq); |
| else if (ret == IRQ_NONE) |
| dev_warn(host->dev, |
| "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n", |
| raw_status, irq_en); |
| |
| spin_unlock(&host->lock); |
| return ret; |
| } |
| |
| static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) |
| { |
| struct meson_host *host = dev_id; |
| struct mmc_command *next_cmd, *cmd = host->cmd; |
| struct mmc_data *data; |
| unsigned int xfer_bytes; |
| |
| if (WARN_ON(!cmd)) |
| return IRQ_NONE; |
| |
| data = cmd->data; |
| if (meson_mmc_bounce_buf_read(data)) { |
| xfer_bytes = data->blksz * data->blocks; |
| WARN_ON(xfer_bytes > host->bounce_buf_size); |
| sg_copy_from_buffer(data->sg, data->sg_len, |
| host->bounce_buf, xfer_bytes); |
| } |
| |
| next_cmd = meson_mmc_get_next_command(cmd); |
| if (next_cmd) |
| meson_mmc_start_cmd(host->mmc, next_cmd); |
| else |
| meson_mmc_request_done(host->mmc, cmd->mrq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * NOTE: we only need this until the GPIO/pinctrl driver can handle |
| * interrupts. For now, the MMC core will use this for polling. |
| */ |
| static int meson_mmc_get_cd(struct mmc_host *mmc) |
| { |
| int status = mmc_gpio_get_cd(mmc); |
| |
| if (status == -ENOSYS) |
| return 1; /* assume present */ |
| |
| return status; |
| } |
| |
| static void meson_mmc_cfg_init(struct meson_host *host) |
| { |
| u32 cfg = 0; |
| |
| cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK, |
| ilog2(SD_EMMC_CFG_RESP_TIMEOUT)); |
| cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP)); |
| cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE)); |
| |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| |
| static int meson_mmc_card_busy(struct mmc_host *mmc) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| u32 regval; |
| |
| regval = readl(host->regs + SD_EMMC_STATUS); |
| |
| /* We are only interrested in lines 0 to 3, so mask the other ones */ |
| return !(FIELD_GET(STATUS_DATI, regval) & 0xf); |
| } |
| |
| static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| /* vqmmc regulator is available */ |
| if (!IS_ERR(mmc->supply.vqmmc)) { |
| /* |
| * The usual amlogic setup uses a GPIO to switch from one |
| * regulator to the other. While the voltage ramp up is |
| * pretty fast, care must be taken when switching from 3.3v |
| * to 1.8v. Please make sure the regulator framework is aware |
| * of your own regulator constraints |
| */ |
| return mmc_regulator_set_vqmmc(mmc, ios); |
| } |
| |
| /* no vqmmc regulator, assume fixed regulator at 3/3.3V */ |
| if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static const struct mmc_host_ops meson_mmc_ops = { |
| .request = meson_mmc_request, |
| .set_ios = meson_mmc_set_ios, |
| .get_cd = meson_mmc_get_cd, |
| .pre_req = meson_mmc_pre_req, |
| .post_req = meson_mmc_post_req, |
| .execute_tuning = meson_mmc_execute_tuning, |
| .card_busy = meson_mmc_card_busy, |
| .start_signal_voltage_switch = meson_mmc_voltage_switch, |
| }; |
| |
| static int meson_mmc_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct meson_host *host; |
| struct mmc_host *mmc; |
| int ret, irq; |
| |
| mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev); |
| if (!mmc) |
| return -ENOMEM; |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->dev = &pdev->dev; |
| dev_set_drvdata(&pdev->dev, host); |
| |
| spin_lock_init(&host->lock); |
| |
| /* Get regulators and the supported OCR mask */ |
| host->vqmmc_enabled = false; |
| ret = mmc_regulator_get_supply(mmc); |
| if (ret == -EPROBE_DEFER) |
| goto free_host; |
| |
| ret = mmc_of_parse(mmc); |
| if (ret) { |
| if (ret != -EPROBE_DEFER) |
| dev_warn(&pdev->dev, "error parsing DT: %d\n", ret); |
| goto free_host; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| host->regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(host->regs)) { |
| ret = PTR_ERR(host->regs); |
| goto free_host; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "failed to get interrupt resource.\n"); |
| ret = -EINVAL; |
| goto free_host; |
| } |
| |
| host->pinctrl = devm_pinctrl_get(&pdev->dev); |
| if (IS_ERR(host->pinctrl)) { |
| ret = PTR_ERR(host->pinctrl); |
| goto free_host; |
| } |
| |
| host->pins_default = pinctrl_lookup_state(host->pinctrl, |
| PINCTRL_STATE_DEFAULT); |
| if (IS_ERR(host->pins_default)) { |
| ret = PTR_ERR(host->pins_default); |
| goto free_host; |
| } |
| |
| host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl, |
| "clk-gate"); |
| if (IS_ERR(host->pins_clk_gate)) { |
| dev_warn(&pdev->dev, |
| "can't get clk-gate pinctrl, using clk_stop bit\n"); |
| host->pins_clk_gate = NULL; |
| } |
| |
| host->core_clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(host->core_clk)) { |
| ret = PTR_ERR(host->core_clk); |
| goto free_host; |
| } |
| |
| ret = clk_prepare_enable(host->core_clk); |
| if (ret) |
| goto free_host; |
| |
| ret = meson_mmc_clk_init(host); |
| if (ret) |
| goto err_core_clk; |
| |
| /* set config to sane default */ |
| meson_mmc_cfg_init(host); |
| |
| /* Stop execution */ |
| writel(0, host->regs + SD_EMMC_START); |
| |
| /* clear, ack and enable interrupts */ |
| writel(0, host->regs + SD_EMMC_IRQ_EN); |
| writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN, |
| host->regs + SD_EMMC_STATUS); |
| writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN, |
| host->regs + SD_EMMC_IRQ_EN); |
| |
| ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq, |
| meson_mmc_irq_thread, IRQF_SHARED, |
| NULL, host); |
| if (ret) |
| goto err_init_clk; |
| |
| mmc->caps |= MMC_CAP_CMD23; |
| mmc->max_blk_count = CMD_CFG_LENGTH_MASK; |
| mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; |
| mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc); |
| mmc->max_seg_size = mmc->max_req_size; |
| |
| /* data bounce buffer */ |
| host->bounce_buf_size = mmc->max_req_size; |
| host->bounce_buf = |
| dma_alloc_coherent(host->dev, host->bounce_buf_size, |
| &host->bounce_dma_addr, GFP_KERNEL); |
| if (host->bounce_buf == NULL) { |
| dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); |
| ret = -ENOMEM; |
| goto err_init_clk; |
| } |
| |
| host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN, |
| &host->descs_dma_addr, GFP_KERNEL); |
| if (!host->descs) { |
| dev_err(host->dev, "Allocating descriptor DMA buffer failed\n"); |
| ret = -ENOMEM; |
| goto err_bounce_buf; |
| } |
| |
| mmc->ops = &meson_mmc_ops; |
| mmc_add_host(mmc); |
| |
| return 0; |
| |
| err_bounce_buf: |
| dma_free_coherent(host->dev, host->bounce_buf_size, |
| host->bounce_buf, host->bounce_dma_addr); |
| err_init_clk: |
| clk_disable_unprepare(host->mmc_clk); |
| err_core_clk: |
| clk_disable_unprepare(host->core_clk); |
| free_host: |
| mmc_free_host(mmc); |
| return ret; |
| } |
| |
| static int meson_mmc_remove(struct platform_device *pdev) |
| { |
| struct meson_host *host = dev_get_drvdata(&pdev->dev); |
| |
| mmc_remove_host(host->mmc); |
| |
| /* disable interrupts */ |
| writel(0, host->regs + SD_EMMC_IRQ_EN); |
| |
| dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN, |
| host->descs, host->descs_dma_addr); |
| dma_free_coherent(host->dev, host->bounce_buf_size, |
| host->bounce_buf, host->bounce_dma_addr); |
| |
| clk_disable_unprepare(host->mmc_clk); |
| clk_disable_unprepare(host->core_clk); |
| |
| mmc_free_host(host->mmc); |
| return 0; |
| } |
| |
| static const struct of_device_id meson_mmc_of_match[] = { |
| { .compatible = "amlogic,meson-gx-mmc", }, |
| { .compatible = "amlogic,meson-gxbb-mmc", }, |
| { .compatible = "amlogic,meson-gxl-mmc", }, |
| { .compatible = "amlogic,meson-gxm-mmc", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, meson_mmc_of_match); |
| |
| static struct platform_driver meson_mmc_driver = { |
| .probe = meson_mmc_probe, |
| .remove = meson_mmc_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = of_match_ptr(meson_mmc_of_match), |
| }, |
| }; |
| |
| module_platform_driver(meson_mmc_driver); |
| |
| MODULE_DESCRIPTION("Amlogic S905*/GX* SD/eMMC driver"); |
| MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |