blob: e065f7e10cca50579f55845d5b1bac99e85e9f77 [file] [log] [blame]
/*
* Generic MIPI DPI Panel Driver
*
* Copyright (C) 2013 Texas Instruments
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>
#include <linux/backlight.h>
#include <video/of_display_timing.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
struct videomode vm;
struct backlight_device *backlight;
struct gpio_desc *enable_gpio;
struct regulator *vcc_supply;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int panel_dpi_connect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (omapdss_device_is_connected(dssdev))
return 0;
r = in->ops.dpi->connect(in, dssdev);
if (r)
return r;
return 0;
}
static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_connected(dssdev))
return;
in->ops.dpi->disconnect(in, dssdev);
}
static int panel_dpi_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
int r;
if (!omapdss_device_is_connected(dssdev))
return -ENODEV;
if (omapdss_device_is_enabled(dssdev))
return 0;
in->ops.dpi->set_timings(in, &ddata->vm);
r = in->ops.dpi->enable(in);
if (r)
return r;
r = regulator_enable(ddata->vcc_supply);
if (r) {
in->ops.dpi->disable(in);
return r;
}
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (ddata->backlight) {
ddata->backlight->props.power = FB_BLANK_UNBLANK;
backlight_update_status(ddata->backlight);
}
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void panel_dpi_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
if (!omapdss_device_is_enabled(dssdev))
return;
if (ddata->backlight) {
ddata->backlight->props.power = FB_BLANK_POWERDOWN;
backlight_update_status(ddata->backlight);
}
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
regulator_disable(ddata->vcc_supply);
in->ops.dpi->disable(in);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
ddata->vm = *vm;
dssdev->panel.vm = *vm;
in->ops.dpi->set_timings(in, vm);
}
static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
*vm = ddata->vm;
}
static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
struct videomode *vm)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
return in->ops.dpi->check_timings(in, vm);
}
static struct omap_dss_driver panel_dpi_ops = {
.connect = panel_dpi_connect,
.disconnect = panel_dpi_disconnect,
.enable = panel_dpi_enable,
.disable = panel_dpi_disable,
.set_timings = panel_dpi_set_timings,
.get_timings = panel_dpi_get_timings,
.check_timings = panel_dpi_check_timings,
};
static int panel_dpi_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct device_node *bl_node;
struct omap_dss_device *in;
int r;
struct display_timing timing;
struct gpio_desc *gpio;
gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
ddata->enable_gpio = gpio;
/*
* Many different panels are supported by this driver and there are
* probably very different needs for their reset pins in regards to
* timing and order relative to the enable gpio. So for now it's just
* ensured that the reset line isn't active.
*/
gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc");
if (IS_ERR(ddata->vcc_supply))
return PTR_ERR(ddata->vcc_supply);
bl_node = of_parse_phandle(node, "backlight", 0);
if (bl_node) {
ddata->backlight = of_find_backlight_by_node(bl_node);
of_node_put(bl_node);
if (!ddata->backlight)
return -EPROBE_DEFER;
}
r = of_get_display_timing(node, "panel-timing", &timing);
if (r) {
dev_err(&pdev->dev, "failed to get video timing\n");
goto error_free_backlight;
}
videomode_from_timing(&timing, &ddata->vm);
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
r = PTR_ERR(in);
goto error_free_backlight;
}
ddata->in = in;
return 0;
error_free_backlight:
if (ddata->backlight)
put_device(&ddata->backlight->dev);
return r;
}
static int panel_dpi_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
int r;
if (!pdev->dev.of_node)
return -ENODEV;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
r = panel_dpi_probe_of(pdev);
if (r)
return r;
dssdev = &ddata->dssdev;
dssdev->dev = &pdev->dev;
dssdev->driver = &panel_dpi_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.vm = ddata->vm;
r = omapdss_register_display(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register panel\n");
goto err_reg;
}
return 0;
err_reg:
omap_dss_put_device(ddata->in);
return r;
}
static int __exit panel_dpi_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev = &ddata->dssdev;
struct omap_dss_device *in = ddata->in;
omapdss_unregister_display(dssdev);
panel_dpi_disable(dssdev);
panel_dpi_disconnect(dssdev);
omap_dss_put_device(in);
if (ddata->backlight)
put_device(&ddata->backlight->dev);
return 0;
}
static const struct of_device_id panel_dpi_of_match[] = {
{ .compatible = "omapdss,panel-dpi", },
{},
};
MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
static struct platform_driver panel_dpi_driver = {
.probe = panel_dpi_probe,
.remove = __exit_p(panel_dpi_remove),
.driver = {
.name = "panel-dpi",
.of_match_table = panel_dpi_of_match,
.suppress_bind_attrs = true,
},
};
module_platform_driver(panel_dpi_driver);
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
MODULE_LICENSE("GPL");