| /* Client connection-specific management code. | |
| * | |
| * Copyright (C) 2016 Red Hat, Inc. All Rights Reserved. | |
| * Written by David Howells (dhowells@redhat.com) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public Licence | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the Licence, or (at your option) any later version. | |
| * | |
| * | |
| * Client connections need to be cached for a little while after they've made a | |
| * call so as to handle retransmitted DATA packets in case the server didn't | |
| * receive the final ACK or terminating ABORT we sent it. | |
| * | |
| * Client connections can be in one of a number of cache states: | |
| * | |
| * (1) INACTIVE - The connection is not held in any list and may not have been | |
| * exposed to the world. If it has been previously exposed, it was | |
| * discarded from the idle list after expiring. | |
| * | |
| * (2) WAITING - The connection is waiting for the number of client conns to | |
| * drop below the maximum capacity. Calls may be in progress upon it from | |
| * when it was active and got culled. | |
| * | |
| * The connection is on the rxrpc_waiting_client_conns list which is kept | |
| * in to-be-granted order. Culled conns with waiters go to the back of | |
| * the queue just like new conns. | |
| * | |
| * (3) ACTIVE - The connection has at least one call in progress upon it, it | |
| * may freely grant available channels to new calls and calls may be | |
| * waiting on it for channels to become available. | |
| * | |
| * The connection is on the rxnet->active_client_conns list which is kept | |
| * in activation order for culling purposes. | |
| * | |
| * rxrpc_nr_active_client_conns is held incremented also. | |
| * | |
| * (4) UPGRADE - As for ACTIVE, but only one call may be in progress and is | |
| * being used to probe for service upgrade. | |
| * | |
| * (5) CULLED - The connection got summarily culled to try and free up | |
| * capacity. Calls currently in progress on the connection are allowed to | |
| * continue, but new calls will have to wait. There can be no waiters in | |
| * this state - the conn would have to go to the WAITING state instead. | |
| * | |
| * (6) IDLE - The connection has no calls in progress upon it and must have | |
| * been exposed to the world (ie. the EXPOSED flag must be set). When it | |
| * expires, the EXPOSED flag is cleared and the connection transitions to | |
| * the INACTIVE state. | |
| * | |
| * The connection is on the rxnet->idle_client_conns list which is kept in | |
| * order of how soon they'll expire. | |
| * | |
| * There are flags of relevance to the cache: | |
| * | |
| * (1) EXPOSED - The connection ID got exposed to the world. If this flag is | |
| * set, an extra ref is added to the connection preventing it from being | |
| * reaped when it has no calls outstanding. This flag is cleared and the | |
| * ref dropped when a conn is discarded from the idle list. | |
| * | |
| * This allows us to move terminal call state retransmission to the | |
| * connection and to discard the call immediately we think it is done | |
| * with. It also give us a chance to reuse the connection. | |
| * | |
| * (2) DONT_REUSE - The connection should be discarded as soon as possible and | |
| * should not be reused. This is set when an exclusive connection is used | |
| * or a call ID counter overflows. | |
| * | |
| * The caching state may only be changed if the cache lock is held. | |
| * | |
| * There are two idle client connection expiry durations. If the total number | |
| * of connections is below the reap threshold, we use the normal duration; if | |
| * it's above, we use the fast duration. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/slab.h> | |
| #include <linux/idr.h> | |
| #include <linux/timer.h> | |
| #include <linux/sched/signal.h> | |
| #include "ar-internal.h" | |
| __read_mostly unsigned int rxrpc_max_client_connections = 1000; | |
| __read_mostly unsigned int rxrpc_reap_client_connections = 900; | |
| __read_mostly unsigned int rxrpc_conn_idle_client_expiry = 2 * 60 * HZ; | |
| __read_mostly unsigned int rxrpc_conn_idle_client_fast_expiry = 2 * HZ; | |
| /* | |
| * We use machine-unique IDs for our client connections. | |
| */ | |
| DEFINE_IDR(rxrpc_client_conn_ids); | |
| static DEFINE_SPINLOCK(rxrpc_conn_id_lock); | |
| static void rxrpc_cull_active_client_conns(struct rxrpc_net *); | |
| /* | |
| * Get a connection ID and epoch for a client connection from the global pool. | |
| * The connection struct pointer is then recorded in the idr radix tree. The | |
| * epoch doesn't change until the client is rebooted (or, at least, unless the | |
| * module is unloaded). | |
| */ | |
| static int rxrpc_get_client_connection_id(struct rxrpc_connection *conn, | |
| gfp_t gfp) | |
| { | |
| struct rxrpc_net *rxnet = conn->params.local->rxnet; | |
| int id; | |
| _enter(""); | |
| idr_preload(gfp); | |
| spin_lock(&rxrpc_conn_id_lock); | |
| id = idr_alloc_cyclic(&rxrpc_client_conn_ids, conn, | |
| 1, 0x40000000, GFP_NOWAIT); | |
| if (id < 0) | |
| goto error; | |
| spin_unlock(&rxrpc_conn_id_lock); | |
| idr_preload_end(); | |
| conn->proto.epoch = rxnet->epoch; | |
| conn->proto.cid = id << RXRPC_CIDSHIFT; | |
| set_bit(RXRPC_CONN_HAS_IDR, &conn->flags); | |
| _leave(" [CID %x]", conn->proto.cid); | |
| return 0; | |
| error: | |
| spin_unlock(&rxrpc_conn_id_lock); | |
| idr_preload_end(); | |
| _leave(" = %d", id); | |
| return id; | |
| } | |
| /* | |
| * Release a connection ID for a client connection from the global pool. | |
| */ | |
| static void rxrpc_put_client_connection_id(struct rxrpc_connection *conn) | |
| { | |
| if (test_bit(RXRPC_CONN_HAS_IDR, &conn->flags)) { | |
| spin_lock(&rxrpc_conn_id_lock); | |
| idr_remove(&rxrpc_client_conn_ids, | |
| conn->proto.cid >> RXRPC_CIDSHIFT); | |
| spin_unlock(&rxrpc_conn_id_lock); | |
| } | |
| } | |
| /* | |
| * Destroy the client connection ID tree. | |
| */ | |
| void rxrpc_destroy_client_conn_ids(void) | |
| { | |
| struct rxrpc_connection *conn; | |
| int id; | |
| if (!idr_is_empty(&rxrpc_client_conn_ids)) { | |
| idr_for_each_entry(&rxrpc_client_conn_ids, conn, id) { | |
| pr_err("AF_RXRPC: Leaked client conn %p {%d}\n", | |
| conn, atomic_read(&conn->usage)); | |
| } | |
| BUG(); | |
| } | |
| idr_destroy(&rxrpc_client_conn_ids); | |
| } | |
| /* | |
| * Allocate a client connection. | |
| */ | |
| static struct rxrpc_connection * | |
| rxrpc_alloc_client_connection(struct rxrpc_conn_parameters *cp, gfp_t gfp) | |
| { | |
| struct rxrpc_connection *conn; | |
| struct rxrpc_net *rxnet = cp->local->rxnet; | |
| int ret; | |
| _enter(""); | |
| conn = rxrpc_alloc_connection(gfp); | |
| if (!conn) { | |
| _leave(" = -ENOMEM"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| atomic_set(&conn->usage, 1); | |
| if (cp->exclusive) | |
| __set_bit(RXRPC_CONN_DONT_REUSE, &conn->flags); | |
| if (cp->upgrade) | |
| __set_bit(RXRPC_CONN_PROBING_FOR_UPGRADE, &conn->flags); | |
| conn->params = *cp; | |
| conn->out_clientflag = RXRPC_CLIENT_INITIATED; | |
| conn->state = RXRPC_CONN_CLIENT; | |
| conn->service_id = cp->service_id; | |
| ret = rxrpc_get_client_connection_id(conn, gfp); | |
| if (ret < 0) | |
| goto error_0; | |
| ret = rxrpc_init_client_conn_security(conn); | |
| if (ret < 0) | |
| goto error_1; | |
| ret = conn->security->prime_packet_security(conn); | |
| if (ret < 0) | |
| goto error_2; | |
| write_lock(&rxnet->conn_lock); | |
| list_add_tail(&conn->proc_link, &rxnet->conn_proc_list); | |
| write_unlock(&rxnet->conn_lock); | |
| /* We steal the caller's peer ref. */ | |
| cp->peer = NULL; | |
| rxrpc_get_local(conn->params.local); | |
| key_get(conn->params.key); | |
| trace_rxrpc_conn(conn, rxrpc_conn_new_client, atomic_read(&conn->usage), | |
| __builtin_return_address(0)); | |
| trace_rxrpc_client(conn, -1, rxrpc_client_alloc); | |
| _leave(" = %p", conn); | |
| return conn; | |
| error_2: | |
| conn->security->clear(conn); | |
| error_1: | |
| rxrpc_put_client_connection_id(conn); | |
| error_0: | |
| kfree(conn); | |
| _leave(" = %d", ret); | |
| return ERR_PTR(ret); | |
| } | |
| /* | |
| * Determine if a connection may be reused. | |
| */ | |
| static bool rxrpc_may_reuse_conn(struct rxrpc_connection *conn) | |
| { | |
| struct rxrpc_net *rxnet = conn->params.local->rxnet; | |
| int id_cursor, id, distance, limit; | |
| if (test_bit(RXRPC_CONN_DONT_REUSE, &conn->flags)) | |
| goto dont_reuse; | |
| if (conn->proto.epoch != rxnet->epoch) | |
| goto mark_dont_reuse; | |
| /* The IDR tree gets very expensive on memory if the connection IDs are | |
| * widely scattered throughout the number space, so we shall want to | |
| * kill off connections that, say, have an ID more than about four | |
| * times the maximum number of client conns away from the current | |
| * allocation point to try and keep the IDs concentrated. | |
| */ | |
| id_cursor = idr_get_cursor(&rxrpc_client_conn_ids); | |
| id = conn->proto.cid >> RXRPC_CIDSHIFT; | |
| distance = id - id_cursor; | |
| if (distance < 0) | |
| distance = -distance; | |
| limit = max(rxrpc_max_client_connections * 4, 1024U); | |
| if (distance > limit) | |
| goto mark_dont_reuse; | |
| return true; | |
| mark_dont_reuse: | |
| set_bit(RXRPC_CONN_DONT_REUSE, &conn->flags); | |
| dont_reuse: | |
| return false; | |
| } | |
| /* | |
| * Create or find a client connection to use for a call. | |
| * | |
| * If we return with a connection, the call will be on its waiting list. It's | |
| * left to the caller to assign a channel and wake up the call. | |
| */ | |
| static int rxrpc_get_client_conn(struct rxrpc_call *call, | |
| struct rxrpc_conn_parameters *cp, | |
| struct sockaddr_rxrpc *srx, | |
| gfp_t gfp) | |
| { | |
| struct rxrpc_connection *conn, *candidate = NULL; | |
| struct rxrpc_local *local = cp->local; | |
| struct rb_node *p, **pp, *parent; | |
| long diff; | |
| int ret = -ENOMEM; | |
| _enter("{%d,%lx},", call->debug_id, call->user_call_ID); | |
| cp->peer = rxrpc_lookup_peer(cp->local, srx, gfp); | |
| if (!cp->peer) | |
| goto error; | |
| call->cong_cwnd = cp->peer->cong_cwnd; | |
| if (call->cong_cwnd >= call->cong_ssthresh) | |
| call->cong_mode = RXRPC_CALL_CONGEST_AVOIDANCE; | |
| else | |
| call->cong_mode = RXRPC_CALL_SLOW_START; | |
| /* If the connection is not meant to be exclusive, search the available | |
| * connections to see if the connection we want to use already exists. | |
| */ | |
| if (!cp->exclusive) { | |
| _debug("search 1"); | |
| spin_lock(&local->client_conns_lock); | |
| p = local->client_conns.rb_node; | |
| while (p) { | |
| conn = rb_entry(p, struct rxrpc_connection, client_node); | |
| #define cmp(X) ((long)conn->params.X - (long)cp->X) | |
| diff = (cmp(peer) ?: | |
| cmp(key) ?: | |
| cmp(security_level) ?: | |
| cmp(upgrade)); | |
| #undef cmp | |
| if (diff < 0) { | |
| p = p->rb_left; | |
| } else if (diff > 0) { | |
| p = p->rb_right; | |
| } else { | |
| if (rxrpc_may_reuse_conn(conn) && | |
| rxrpc_get_connection_maybe(conn)) | |
| goto found_extant_conn; | |
| /* The connection needs replacing. It's better | |
| * to effect that when we have something to | |
| * replace it with so that we don't have to | |
| * rebalance the tree twice. | |
| */ | |
| break; | |
| } | |
| } | |
| spin_unlock(&local->client_conns_lock); | |
| } | |
| /* There wasn't a connection yet or we need an exclusive connection. | |
| * We need to create a candidate and then potentially redo the search | |
| * in case we're racing with another thread also trying to connect on a | |
| * shareable connection. | |
| */ | |
| _debug("new conn"); | |
| candidate = rxrpc_alloc_client_connection(cp, gfp); | |
| if (IS_ERR(candidate)) { | |
| ret = PTR_ERR(candidate); | |
| goto error_peer; | |
| } | |
| /* Add the call to the new connection's waiting list in case we're | |
| * going to have to wait for the connection to come live. It's our | |
| * connection, so we want first dibs on the channel slots. We would | |
| * normally have to take channel_lock but we do this before anyone else | |
| * can see the connection. | |
| */ | |
| list_add_tail(&call->chan_wait_link, &candidate->waiting_calls); | |
| if (cp->exclusive) { | |
| call->conn = candidate; | |
| call->security_ix = candidate->security_ix; | |
| call->service_id = candidate->service_id; | |
| _leave(" = 0 [exclusive %d]", candidate->debug_id); | |
| return 0; | |
| } | |
| /* Publish the new connection for userspace to find. We need to redo | |
| * the search before doing this lest we race with someone else adding a | |
| * conflicting instance. | |
| */ | |
| _debug("search 2"); | |
| spin_lock(&local->client_conns_lock); | |
| pp = &local->client_conns.rb_node; | |
| parent = NULL; | |
| while (*pp) { | |
| parent = *pp; | |
| conn = rb_entry(parent, struct rxrpc_connection, client_node); | |
| #define cmp(X) ((long)conn->params.X - (long)candidate->params.X) | |
| diff = (cmp(peer) ?: | |
| cmp(key) ?: | |
| cmp(security_level) ?: | |
| cmp(upgrade)); | |
| #undef cmp | |
| if (diff < 0) { | |
| pp = &(*pp)->rb_left; | |
| } else if (diff > 0) { | |
| pp = &(*pp)->rb_right; | |
| } else { | |
| if (rxrpc_may_reuse_conn(conn) && | |
| rxrpc_get_connection_maybe(conn)) | |
| goto found_extant_conn; | |
| /* The old connection is from an outdated epoch. */ | |
| _debug("replace conn"); | |
| clear_bit(RXRPC_CONN_IN_CLIENT_CONNS, &conn->flags); | |
| rb_replace_node(&conn->client_node, | |
| &candidate->client_node, | |
| &local->client_conns); | |
| trace_rxrpc_client(conn, -1, rxrpc_client_replace); | |
| goto candidate_published; | |
| } | |
| } | |
| _debug("new conn"); | |
| rb_link_node(&candidate->client_node, parent, pp); | |
| rb_insert_color(&candidate->client_node, &local->client_conns); | |
| candidate_published: | |
| set_bit(RXRPC_CONN_IN_CLIENT_CONNS, &candidate->flags); | |
| call->conn = candidate; | |
| call->security_ix = candidate->security_ix; | |
| call->service_id = candidate->service_id; | |
| spin_unlock(&local->client_conns_lock); | |
| _leave(" = 0 [new %d]", candidate->debug_id); | |
| return 0; | |
| /* We come here if we found a suitable connection already in existence. | |
| * Discard any candidate we may have allocated, and try to get a | |
| * channel on this one. | |
| */ | |
| found_extant_conn: | |
| _debug("found conn"); | |
| spin_unlock(&local->client_conns_lock); | |
| if (candidate) { | |
| trace_rxrpc_client(candidate, -1, rxrpc_client_duplicate); | |
| rxrpc_put_connection(candidate); | |
| candidate = NULL; | |
| } | |
| spin_lock(&conn->channel_lock); | |
| call->conn = conn; | |
| call->security_ix = conn->security_ix; | |
| call->service_id = conn->service_id; | |
| list_add(&call->chan_wait_link, &conn->waiting_calls); | |
| spin_unlock(&conn->channel_lock); | |
| _leave(" = 0 [extant %d]", conn->debug_id); | |
| return 0; | |
| error_peer: | |
| rxrpc_put_peer(cp->peer); | |
| cp->peer = NULL; | |
| error: | |
| _leave(" = %d", ret); | |
| return ret; | |
| } | |
| /* | |
| * Activate a connection. | |
| */ | |
| static void rxrpc_activate_conn(struct rxrpc_net *rxnet, | |
| struct rxrpc_connection *conn) | |
| { | |
| if (test_bit(RXRPC_CONN_PROBING_FOR_UPGRADE, &conn->flags)) { | |
| trace_rxrpc_client(conn, -1, rxrpc_client_to_upgrade); | |
| conn->cache_state = RXRPC_CONN_CLIENT_UPGRADE; | |
| } else { | |
| trace_rxrpc_client(conn, -1, rxrpc_client_to_active); | |
| conn->cache_state = RXRPC_CONN_CLIENT_ACTIVE; | |
| } | |
| rxnet->nr_active_client_conns++; | |
| list_move_tail(&conn->cache_link, &rxnet->active_client_conns); | |
| } | |
| /* | |
| * Attempt to animate a connection for a new call. | |
| * | |
| * If it's not exclusive, the connection is in the endpoint tree, and we're in | |
| * the conn's list of those waiting to grab a channel. There is, however, a | |
| * limit on the number of live connections allowed at any one time, so we may | |
| * have to wait for capacity to become available. | |
| * | |
| * Note that a connection on the waiting queue might *also* have active | |
| * channels if it has been culled to make space and then re-requested by a new | |
| * call. | |
| */ | |
| static void rxrpc_animate_client_conn(struct rxrpc_net *rxnet, | |
| struct rxrpc_connection *conn) | |
| { | |
| unsigned int nr_conns; | |
| _enter("%d,%d", conn->debug_id, conn->cache_state); | |
| if (conn->cache_state == RXRPC_CONN_CLIENT_ACTIVE || | |
| conn->cache_state == RXRPC_CONN_CLIENT_UPGRADE) | |
| goto out; | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| nr_conns = rxnet->nr_client_conns; | |
| if (!test_and_set_bit(RXRPC_CONN_COUNTED, &conn->flags)) { | |
| trace_rxrpc_client(conn, -1, rxrpc_client_count); | |
| rxnet->nr_client_conns = nr_conns + 1; | |
| } | |
| switch (conn->cache_state) { | |
| case RXRPC_CONN_CLIENT_ACTIVE: | |
| case RXRPC_CONN_CLIENT_UPGRADE: | |
| case RXRPC_CONN_CLIENT_WAITING: | |
| break; | |
| case RXRPC_CONN_CLIENT_INACTIVE: | |
| case RXRPC_CONN_CLIENT_CULLED: | |
| case RXRPC_CONN_CLIENT_IDLE: | |
| if (nr_conns >= rxrpc_max_client_connections) | |
| goto wait_for_capacity; | |
| goto activate_conn; | |
| default: | |
| BUG(); | |
| } | |
| out_unlock: | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| out: | |
| _leave(" [%d]", conn->cache_state); | |
| return; | |
| activate_conn: | |
| _debug("activate"); | |
| rxrpc_activate_conn(rxnet, conn); | |
| goto out_unlock; | |
| wait_for_capacity: | |
| _debug("wait"); | |
| trace_rxrpc_client(conn, -1, rxrpc_client_to_waiting); | |
| conn->cache_state = RXRPC_CONN_CLIENT_WAITING; | |
| list_move_tail(&conn->cache_link, &rxnet->waiting_client_conns); | |
| goto out_unlock; | |
| } | |
| /* | |
| * Deactivate a channel. | |
| */ | |
| static void rxrpc_deactivate_one_channel(struct rxrpc_connection *conn, | |
| unsigned int channel) | |
| { | |
| struct rxrpc_channel *chan = &conn->channels[channel]; | |
| rcu_assign_pointer(chan->call, NULL); | |
| conn->active_chans &= ~(1 << channel); | |
| } | |
| /* | |
| * Assign a channel to the call at the front of the queue and wake the call up. | |
| * We don't increment the callNumber counter until this number has been exposed | |
| * to the world. | |
| */ | |
| static void rxrpc_activate_one_channel(struct rxrpc_connection *conn, | |
| unsigned int channel) | |
| { | |
| struct rxrpc_channel *chan = &conn->channels[channel]; | |
| struct rxrpc_call *call = list_entry(conn->waiting_calls.next, | |
| struct rxrpc_call, chan_wait_link); | |
| u32 call_id = chan->call_counter + 1; | |
| trace_rxrpc_client(conn, channel, rxrpc_client_chan_activate); | |
| write_lock_bh(&call->state_lock); | |
| if (!test_bit(RXRPC_CALL_TX_LASTQ, &call->flags)) | |
| call->state = RXRPC_CALL_CLIENT_SEND_REQUEST; | |
| else | |
| call->state = RXRPC_CALL_CLIENT_AWAIT_REPLY; | |
| write_unlock_bh(&call->state_lock); | |
| rxrpc_see_call(call); | |
| list_del_init(&call->chan_wait_link); | |
| conn->active_chans |= 1 << channel; | |
| call->peer = rxrpc_get_peer(conn->params.peer); | |
| call->cid = conn->proto.cid | channel; | |
| call->call_id = call_id; | |
| trace_rxrpc_connect_call(call); | |
| _net("CONNECT call %08x:%08x as call %d on conn %d", | |
| call->cid, call->call_id, call->debug_id, conn->debug_id); | |
| /* Paired with the read barrier in rxrpc_wait_for_channel(). This | |
| * orders cid and epoch in the connection wrt to call_id without the | |
| * need to take the channel_lock. | |
| * | |
| * We provisionally assign a callNumber at this point, but we don't | |
| * confirm it until the call is about to be exposed. | |
| * | |
| * TODO: Pair with a barrier in the data_ready handler when that looks | |
| * at the call ID through a connection channel. | |
| */ | |
| smp_wmb(); | |
| chan->call_id = call_id; | |
| rcu_assign_pointer(chan->call, call); | |
| wake_up(&call->waitq); | |
| } | |
| /* | |
| * Assign channels and callNumbers to waiting calls with channel_lock | |
| * held by caller. | |
| */ | |
| static void rxrpc_activate_channels_locked(struct rxrpc_connection *conn) | |
| { | |
| u8 avail, mask; | |
| switch (conn->cache_state) { | |
| case RXRPC_CONN_CLIENT_ACTIVE: | |
| mask = RXRPC_ACTIVE_CHANS_MASK; | |
| break; | |
| case RXRPC_CONN_CLIENT_UPGRADE: | |
| mask = 0x01; | |
| break; | |
| default: | |
| return; | |
| } | |
| while (!list_empty(&conn->waiting_calls) && | |
| (avail = ~conn->active_chans, | |
| avail &= mask, | |
| avail != 0)) | |
| rxrpc_activate_one_channel(conn, __ffs(avail)); | |
| } | |
| /* | |
| * Assign channels and callNumbers to waiting calls. | |
| */ | |
| static void rxrpc_activate_channels(struct rxrpc_connection *conn) | |
| { | |
| _enter("%d", conn->debug_id); | |
| trace_rxrpc_client(conn, -1, rxrpc_client_activate_chans); | |
| if (conn->active_chans == RXRPC_ACTIVE_CHANS_MASK) | |
| return; | |
| spin_lock(&conn->channel_lock); | |
| rxrpc_activate_channels_locked(conn); | |
| spin_unlock(&conn->channel_lock); | |
| _leave(""); | |
| } | |
| /* | |
| * Wait for a callNumber and a channel to be granted to a call. | |
| */ | |
| static int rxrpc_wait_for_channel(struct rxrpc_call *call, gfp_t gfp) | |
| { | |
| int ret = 0; | |
| _enter("%d", call->debug_id); | |
| if (!call->call_id) { | |
| DECLARE_WAITQUEUE(myself, current); | |
| if (!gfpflags_allow_blocking(gfp)) { | |
| ret = -EAGAIN; | |
| goto out; | |
| } | |
| add_wait_queue_exclusive(&call->waitq, &myself); | |
| for (;;) { | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| if (call->call_id) | |
| break; | |
| if (signal_pending(current)) { | |
| ret = -ERESTARTSYS; | |
| break; | |
| } | |
| schedule(); | |
| } | |
| remove_wait_queue(&call->waitq, &myself); | |
| __set_current_state(TASK_RUNNING); | |
| } | |
| /* Paired with the write barrier in rxrpc_activate_one_channel(). */ | |
| smp_rmb(); | |
| out: | |
| _leave(" = %d", ret); | |
| return ret; | |
| } | |
| /* | |
| * find a connection for a call | |
| * - called in process context with IRQs enabled | |
| */ | |
| int rxrpc_connect_call(struct rxrpc_call *call, | |
| struct rxrpc_conn_parameters *cp, | |
| struct sockaddr_rxrpc *srx, | |
| gfp_t gfp) | |
| { | |
| struct rxrpc_net *rxnet = cp->local->rxnet; | |
| int ret; | |
| _enter("{%d,%lx},", call->debug_id, call->user_call_ID); | |
| rxrpc_discard_expired_client_conns(&rxnet->client_conn_reaper.work); | |
| rxrpc_cull_active_client_conns(rxnet); | |
| ret = rxrpc_get_client_conn(call, cp, srx, gfp); | |
| if (ret < 0) | |
| goto out; | |
| rxrpc_animate_client_conn(rxnet, call->conn); | |
| rxrpc_activate_channels(call->conn); | |
| ret = rxrpc_wait_for_channel(call, gfp); | |
| if (ret < 0) { | |
| rxrpc_disconnect_client_call(call); | |
| goto out; | |
| } | |
| spin_lock_bh(&call->conn->params.peer->lock); | |
| hlist_add_head(&call->error_link, | |
| &call->conn->params.peer->error_targets); | |
| spin_unlock_bh(&call->conn->params.peer->lock); | |
| out: | |
| _leave(" = %d", ret); | |
| return ret; | |
| } | |
| /* | |
| * Note that a connection is about to be exposed to the world. Once it is | |
| * exposed, we maintain an extra ref on it that stops it from being summarily | |
| * discarded before it's (a) had a chance to deal with retransmission and (b) | |
| * had a chance at re-use (the per-connection security negotiation is | |
| * expensive). | |
| */ | |
| static void rxrpc_expose_client_conn(struct rxrpc_connection *conn, | |
| unsigned int channel) | |
| { | |
| if (!test_and_set_bit(RXRPC_CONN_EXPOSED, &conn->flags)) { | |
| trace_rxrpc_client(conn, channel, rxrpc_client_exposed); | |
| rxrpc_get_connection(conn); | |
| } | |
| } | |
| /* | |
| * Note that a call, and thus a connection, is about to be exposed to the | |
| * world. | |
| */ | |
| void rxrpc_expose_client_call(struct rxrpc_call *call) | |
| { | |
| unsigned int channel = call->cid & RXRPC_CHANNELMASK; | |
| struct rxrpc_connection *conn = call->conn; | |
| struct rxrpc_channel *chan = &conn->channels[channel]; | |
| if (!test_and_set_bit(RXRPC_CALL_EXPOSED, &call->flags)) { | |
| /* Mark the call ID as being used. If the callNumber counter | |
| * exceeds ~2 billion, we kill the connection after its | |
| * outstanding calls have finished so that the counter doesn't | |
| * wrap. | |
| */ | |
| chan->call_counter++; | |
| if (chan->call_counter >= INT_MAX) | |
| set_bit(RXRPC_CONN_DONT_REUSE, &conn->flags); | |
| rxrpc_expose_client_conn(conn, channel); | |
| } | |
| } | |
| /* | |
| * Disconnect a client call. | |
| */ | |
| void rxrpc_disconnect_client_call(struct rxrpc_call *call) | |
| { | |
| unsigned int channel = call->cid & RXRPC_CHANNELMASK; | |
| struct rxrpc_connection *conn = call->conn; | |
| struct rxrpc_channel *chan = &conn->channels[channel]; | |
| struct rxrpc_net *rxnet = rxrpc_net(sock_net(&call->socket->sk)); | |
| trace_rxrpc_client(conn, channel, rxrpc_client_chan_disconnect); | |
| call->conn = NULL; | |
| spin_lock(&conn->channel_lock); | |
| /* Calls that have never actually been assigned a channel can simply be | |
| * discarded. If the conn didn't get used either, it will follow | |
| * immediately unless someone else grabs it in the meantime. | |
| */ | |
| if (!list_empty(&call->chan_wait_link)) { | |
| _debug("call is waiting"); | |
| ASSERTCMP(call->call_id, ==, 0); | |
| ASSERT(!test_bit(RXRPC_CALL_EXPOSED, &call->flags)); | |
| list_del_init(&call->chan_wait_link); | |
| trace_rxrpc_client(conn, channel, rxrpc_client_chan_unstarted); | |
| /* We must deactivate or idle the connection if it's now | |
| * waiting for nothing. | |
| */ | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| if (conn->cache_state == RXRPC_CONN_CLIENT_WAITING && | |
| list_empty(&conn->waiting_calls) && | |
| !conn->active_chans) | |
| goto idle_connection; | |
| goto out; | |
| } | |
| ASSERTCMP(rcu_access_pointer(chan->call), ==, call); | |
| /* If a client call was exposed to the world, we save the result for | |
| * retransmission. | |
| * | |
| * We use a barrier here so that the call number and abort code can be | |
| * read without needing to take a lock. | |
| * | |
| * TODO: Make the incoming packet handler check this and handle | |
| * terminal retransmission without requiring access to the call. | |
| */ | |
| if (test_bit(RXRPC_CALL_EXPOSED, &call->flags)) { | |
| _debug("exposed %u,%u", call->call_id, call->abort_code); | |
| __rxrpc_disconnect_call(conn, call); | |
| } | |
| /* See if we can pass the channel directly to another call. */ | |
| if (conn->cache_state == RXRPC_CONN_CLIENT_ACTIVE && | |
| !list_empty(&conn->waiting_calls)) { | |
| trace_rxrpc_client(conn, channel, rxrpc_client_chan_pass); | |
| rxrpc_activate_one_channel(conn, channel); | |
| goto out_2; | |
| } | |
| /* Things are more complex and we need the cache lock. We might be | |
| * able to simply idle the conn or it might now be lurking on the wait | |
| * list. It might even get moved back to the active list whilst we're | |
| * waiting for the lock. | |
| */ | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| switch (conn->cache_state) { | |
| case RXRPC_CONN_CLIENT_UPGRADE: | |
| /* Deal with termination of a service upgrade probe. */ | |
| if (test_bit(RXRPC_CONN_EXPOSED, &conn->flags)) { | |
| clear_bit(RXRPC_CONN_PROBING_FOR_UPGRADE, &conn->flags); | |
| trace_rxrpc_client(conn, channel, rxrpc_client_to_active); | |
| conn->cache_state = RXRPC_CONN_CLIENT_ACTIVE; | |
| rxrpc_activate_channels_locked(conn); | |
| } | |
| /* fall through */ | |
| case RXRPC_CONN_CLIENT_ACTIVE: | |
| if (list_empty(&conn->waiting_calls)) { | |
| rxrpc_deactivate_one_channel(conn, channel); | |
| if (!conn->active_chans) { | |
| rxnet->nr_active_client_conns--; | |
| goto idle_connection; | |
| } | |
| goto out; | |
| } | |
| trace_rxrpc_client(conn, channel, rxrpc_client_chan_pass); | |
| rxrpc_activate_one_channel(conn, channel); | |
| goto out; | |
| case RXRPC_CONN_CLIENT_CULLED: | |
| rxrpc_deactivate_one_channel(conn, channel); | |
| ASSERT(list_empty(&conn->waiting_calls)); | |
| if (!conn->active_chans) | |
| goto idle_connection; | |
| goto out; | |
| case RXRPC_CONN_CLIENT_WAITING: | |
| rxrpc_deactivate_one_channel(conn, channel); | |
| goto out; | |
| default: | |
| BUG(); | |
| } | |
| out: | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| out_2: | |
| spin_unlock(&conn->channel_lock); | |
| rxrpc_put_connection(conn); | |
| _leave(""); | |
| return; | |
| idle_connection: | |
| /* As no channels remain active, the connection gets deactivated | |
| * immediately or moved to the idle list for a short while. | |
| */ | |
| if (test_bit(RXRPC_CONN_EXPOSED, &conn->flags)) { | |
| trace_rxrpc_client(conn, channel, rxrpc_client_to_idle); | |
| conn->idle_timestamp = jiffies; | |
| conn->cache_state = RXRPC_CONN_CLIENT_IDLE; | |
| list_move_tail(&conn->cache_link, &rxnet->idle_client_conns); | |
| if (rxnet->idle_client_conns.next == &conn->cache_link && | |
| !rxnet->kill_all_client_conns) | |
| queue_delayed_work(rxrpc_workqueue, | |
| &rxnet->client_conn_reaper, | |
| rxrpc_conn_idle_client_expiry); | |
| } else { | |
| trace_rxrpc_client(conn, channel, rxrpc_client_to_inactive); | |
| conn->cache_state = RXRPC_CONN_CLIENT_INACTIVE; | |
| list_del_init(&conn->cache_link); | |
| } | |
| goto out; | |
| } | |
| /* | |
| * Clean up a dead client connection. | |
| */ | |
| static struct rxrpc_connection * | |
| rxrpc_put_one_client_conn(struct rxrpc_connection *conn) | |
| { | |
| struct rxrpc_connection *next = NULL; | |
| struct rxrpc_local *local = conn->params.local; | |
| struct rxrpc_net *rxnet = local->rxnet; | |
| unsigned int nr_conns; | |
| trace_rxrpc_client(conn, -1, rxrpc_client_cleanup); | |
| if (test_bit(RXRPC_CONN_IN_CLIENT_CONNS, &conn->flags)) { | |
| spin_lock(&local->client_conns_lock); | |
| if (test_and_clear_bit(RXRPC_CONN_IN_CLIENT_CONNS, | |
| &conn->flags)) | |
| rb_erase(&conn->client_node, &local->client_conns); | |
| spin_unlock(&local->client_conns_lock); | |
| } | |
| rxrpc_put_client_connection_id(conn); | |
| ASSERTCMP(conn->cache_state, ==, RXRPC_CONN_CLIENT_INACTIVE); | |
| if (test_bit(RXRPC_CONN_COUNTED, &conn->flags)) { | |
| trace_rxrpc_client(conn, -1, rxrpc_client_uncount); | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| nr_conns = --rxnet->nr_client_conns; | |
| if (nr_conns < rxrpc_max_client_connections && | |
| !list_empty(&rxnet->waiting_client_conns)) { | |
| next = list_entry(rxnet->waiting_client_conns.next, | |
| struct rxrpc_connection, cache_link); | |
| rxrpc_get_connection(next); | |
| rxrpc_activate_conn(rxnet, next); | |
| } | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| } | |
| rxrpc_kill_connection(conn); | |
| if (next) | |
| rxrpc_activate_channels(next); | |
| /* We need to get rid of the temporary ref we took upon next, but we | |
| * can't call rxrpc_put_connection() recursively. | |
| */ | |
| return next; | |
| } | |
| /* | |
| * Clean up a dead client connections. | |
| */ | |
| void rxrpc_put_client_conn(struct rxrpc_connection *conn) | |
| { | |
| const void *here = __builtin_return_address(0); | |
| int n; | |
| do { | |
| n = atomic_dec_return(&conn->usage); | |
| trace_rxrpc_conn(conn, rxrpc_conn_put_client, n, here); | |
| if (n > 0) | |
| return; | |
| ASSERTCMP(n, >=, 0); | |
| conn = rxrpc_put_one_client_conn(conn); | |
| } while (conn); | |
| } | |
| /* | |
| * Kill the longest-active client connections to make room for new ones. | |
| */ | |
| static void rxrpc_cull_active_client_conns(struct rxrpc_net *rxnet) | |
| { | |
| struct rxrpc_connection *conn; | |
| unsigned int nr_conns = rxnet->nr_client_conns; | |
| unsigned int nr_active, limit; | |
| _enter(""); | |
| ASSERTCMP(nr_conns, >=, 0); | |
| if (nr_conns < rxrpc_max_client_connections) { | |
| _leave(" [ok]"); | |
| return; | |
| } | |
| limit = rxrpc_reap_client_connections; | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| nr_active = rxnet->nr_active_client_conns; | |
| while (nr_active > limit) { | |
| ASSERT(!list_empty(&rxnet->active_client_conns)); | |
| conn = list_entry(rxnet->active_client_conns.next, | |
| struct rxrpc_connection, cache_link); | |
| ASSERTIFCMP(conn->cache_state != RXRPC_CONN_CLIENT_ACTIVE, | |
| conn->cache_state, ==, RXRPC_CONN_CLIENT_UPGRADE); | |
| if (list_empty(&conn->waiting_calls)) { | |
| trace_rxrpc_client(conn, -1, rxrpc_client_to_culled); | |
| conn->cache_state = RXRPC_CONN_CLIENT_CULLED; | |
| list_del_init(&conn->cache_link); | |
| } else { | |
| trace_rxrpc_client(conn, -1, rxrpc_client_to_waiting); | |
| conn->cache_state = RXRPC_CONN_CLIENT_WAITING; | |
| list_move_tail(&conn->cache_link, | |
| &rxnet->waiting_client_conns); | |
| } | |
| nr_active--; | |
| } | |
| rxnet->nr_active_client_conns = nr_active; | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| ASSERTCMP(nr_active, >=, 0); | |
| _leave(" [culled]"); | |
| } | |
| /* | |
| * Discard expired client connections from the idle list. Each conn in the | |
| * idle list has been exposed and holds an extra ref because of that. | |
| * | |
| * This may be called from conn setup or from a work item so cannot be | |
| * considered non-reentrant. | |
| */ | |
| void rxrpc_discard_expired_client_conns(struct work_struct *work) | |
| { | |
| struct rxrpc_connection *conn; | |
| struct rxrpc_net *rxnet = | |
| container_of(to_delayed_work(work), | |
| struct rxrpc_net, client_conn_reaper); | |
| unsigned long expiry, conn_expires_at, now; | |
| unsigned int nr_conns; | |
| bool did_discard = false; | |
| _enter(""); | |
| if (list_empty(&rxnet->idle_client_conns)) { | |
| _leave(" [empty]"); | |
| return; | |
| } | |
| /* Don't double up on the discarding */ | |
| if (!spin_trylock(&rxnet->client_conn_discard_lock)) { | |
| _leave(" [already]"); | |
| return; | |
| } | |
| /* We keep an estimate of what the number of conns ought to be after | |
| * we've discarded some so that we don't overdo the discarding. | |
| */ | |
| nr_conns = rxnet->nr_client_conns; | |
| next: | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| if (list_empty(&rxnet->idle_client_conns)) | |
| goto out; | |
| conn = list_entry(rxnet->idle_client_conns.next, | |
| struct rxrpc_connection, cache_link); | |
| ASSERT(test_bit(RXRPC_CONN_EXPOSED, &conn->flags)); | |
| if (!rxnet->kill_all_client_conns) { | |
| /* If the number of connections is over the reap limit, we | |
| * expedite discard by reducing the expiry timeout. We must, | |
| * however, have at least a short grace period to be able to do | |
| * final-ACK or ABORT retransmission. | |
| */ | |
| expiry = rxrpc_conn_idle_client_expiry; | |
| if (nr_conns > rxrpc_reap_client_connections) | |
| expiry = rxrpc_conn_idle_client_fast_expiry; | |
| conn_expires_at = conn->idle_timestamp + expiry; | |
| now = READ_ONCE(jiffies); | |
| if (time_after(conn_expires_at, now)) | |
| goto not_yet_expired; | |
| } | |
| trace_rxrpc_client(conn, -1, rxrpc_client_discard); | |
| if (!test_and_clear_bit(RXRPC_CONN_EXPOSED, &conn->flags)) | |
| BUG(); | |
| conn->cache_state = RXRPC_CONN_CLIENT_INACTIVE; | |
| list_del_init(&conn->cache_link); | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| /* When we cleared the EXPOSED flag, we took on responsibility for the | |
| * reference that that had on the usage count. We deal with that here. | |
| * If someone re-sets the flag and re-gets the ref, that's fine. | |
| */ | |
| rxrpc_put_connection(conn); | |
| did_discard = true; | |
| nr_conns--; | |
| goto next; | |
| not_yet_expired: | |
| /* The connection at the front of the queue hasn't yet expired, so | |
| * schedule the work item for that point if we discarded something. | |
| * | |
| * We don't worry if the work item is already scheduled - it can look | |
| * after rescheduling itself at a later time. We could cancel it, but | |
| * then things get messier. | |
| */ | |
| _debug("not yet"); | |
| if (!rxnet->kill_all_client_conns) | |
| queue_delayed_work(rxrpc_workqueue, | |
| &rxnet->client_conn_reaper, | |
| conn_expires_at - now); | |
| out: | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| spin_unlock(&rxnet->client_conn_discard_lock); | |
| _leave(""); | |
| } | |
| /* | |
| * Preemptively destroy all the client connection records rather than waiting | |
| * for them to time out | |
| */ | |
| void rxrpc_destroy_all_client_connections(struct rxrpc_net *rxnet) | |
| { | |
| _enter(""); | |
| spin_lock(&rxnet->client_conn_cache_lock); | |
| rxnet->kill_all_client_conns = true; | |
| spin_unlock(&rxnet->client_conn_cache_lock); | |
| cancel_delayed_work(&rxnet->client_conn_reaper); | |
| if (!queue_delayed_work(rxrpc_workqueue, &rxnet->client_conn_reaper, 0)) | |
| _debug("destroy: queue failed"); | |
| _leave(""); | |
| } |