|  | /* | 
|  | * BSS client mode implementation | 
|  | * Copyright 2003-2008, Jouni Malinen <j@w1.fi> | 
|  | * Copyright 2004, Instant802 Networks, Inc. | 
|  | * Copyright 2005, Devicescape Software, Inc. | 
|  | * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/pm_qos.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/export.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include "ieee80211_i.h" | 
|  | #include "driver-ops.h" | 
|  | #include "rate.h" | 
|  | #include "led.h" | 
|  |  | 
|  | #define IEEE80211_AUTH_TIMEOUT (HZ / 5) | 
|  | #define IEEE80211_AUTH_MAX_TRIES 3 | 
|  | #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) | 
|  | #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) | 
|  | #define IEEE80211_ASSOC_MAX_TRIES 3 | 
|  |  | 
|  | static int max_nullfunc_tries = 2; | 
|  | module_param(max_nullfunc_tries, int, 0644); | 
|  | MODULE_PARM_DESC(max_nullfunc_tries, | 
|  | "Maximum nullfunc tx tries before disconnecting (reason 4)."); | 
|  |  | 
|  | static int max_probe_tries = 5; | 
|  | module_param(max_probe_tries, int, 0644); | 
|  | MODULE_PARM_DESC(max_probe_tries, | 
|  | "Maximum probe tries before disconnecting (reason 4)."); | 
|  |  | 
|  | /* | 
|  | * Beacon loss timeout is calculated as N frames times the | 
|  | * advertised beacon interval.  This may need to be somewhat | 
|  | * higher than what hardware might detect to account for | 
|  | * delays in the host processing frames. But since we also | 
|  | * probe on beacon miss before declaring the connection lost | 
|  | * default to what we want. | 
|  | */ | 
|  | #define IEEE80211_BEACON_LOSS_COUNT	7 | 
|  |  | 
|  | /* | 
|  | * Time the connection can be idle before we probe | 
|  | * it to see if we can still talk to the AP. | 
|  | */ | 
|  | #define IEEE80211_CONNECTION_IDLE_TIME	(30 * HZ) | 
|  | /* | 
|  | * Time we wait for a probe response after sending | 
|  | * a probe request because of beacon loss or for | 
|  | * checking the connection still works. | 
|  | */ | 
|  | static int probe_wait_ms = 500; | 
|  | module_param(probe_wait_ms, int, 0644); | 
|  | MODULE_PARM_DESC(probe_wait_ms, | 
|  | "Maximum time(ms) to wait for probe response" | 
|  | " before disconnecting (reason 4)."); | 
|  |  | 
|  | /* | 
|  | * Weight given to the latest Beacon frame when calculating average signal | 
|  | * strength for Beacon frames received in the current BSS. This must be | 
|  | * between 1 and 15. | 
|  | */ | 
|  | #define IEEE80211_SIGNAL_AVE_WEIGHT	3 | 
|  |  | 
|  | /* | 
|  | * How many Beacon frames need to have been used in average signal strength | 
|  | * before starting to indicate signal change events. | 
|  | */ | 
|  | #define IEEE80211_SIGNAL_AVE_MIN_COUNT	4 | 
|  |  | 
|  | #define TMR_RUNNING_TIMER	0 | 
|  | #define TMR_RUNNING_CHANSW	1 | 
|  |  | 
|  | #define DEAUTH_DISASSOC_LEN	(24 /* hdr */ + 2 /* reason */) | 
|  |  | 
|  | /* | 
|  | * All cfg80211 functions have to be called outside a locked | 
|  | * section so that they can acquire a lock themselves... This | 
|  | * is much simpler than queuing up things in cfg80211, but we | 
|  | * do need some indirection for that here. | 
|  | */ | 
|  | enum rx_mgmt_action { | 
|  | /* no action required */ | 
|  | RX_MGMT_NONE, | 
|  |  | 
|  | /* caller must call cfg80211_send_deauth() */ | 
|  | RX_MGMT_CFG80211_DEAUTH, | 
|  |  | 
|  | /* caller must call cfg80211_send_disassoc() */ | 
|  | RX_MGMT_CFG80211_DISASSOC, | 
|  |  | 
|  | /* caller must call cfg80211_send_rx_auth() */ | 
|  | RX_MGMT_CFG80211_RX_AUTH, | 
|  |  | 
|  | /* caller must call cfg80211_send_rx_assoc() */ | 
|  | RX_MGMT_CFG80211_RX_ASSOC, | 
|  |  | 
|  | /* caller must call cfg80211_send_assoc_timeout() */ | 
|  | RX_MGMT_CFG80211_ASSOC_TIMEOUT, | 
|  | }; | 
|  |  | 
|  | /* utils */ | 
|  | static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed *ifmgd) | 
|  | { | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We can have multiple work items (and connection probing) | 
|  | * scheduling this timer, but we need to take care to only | 
|  | * reschedule it when it should fire _earlier_ than it was | 
|  | * asked for before, or if it's not pending right now. This | 
|  | * function ensures that. Note that it then is required to | 
|  | * run this function for all timeouts after the first one | 
|  | * has happened -- the work that runs from this timer will | 
|  | * do that. | 
|  | */ | 
|  | static void run_again(struct ieee80211_if_managed *ifmgd, unsigned long timeout) | 
|  | { | 
|  | ASSERT_MGD_MTX(ifmgd); | 
|  |  | 
|  | if (!timer_pending(&ifmgd->timer) || | 
|  | time_before(timeout, ifmgd->timer.expires)) | 
|  | mod_timer(&ifmgd->timer, timeout); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) | 
|  | return; | 
|  |  | 
|  | mod_timer(&sdata->u.mgd.bcn_mon_timer, | 
|  | round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (unlikely(!sdata->u.mgd.associated)) | 
|  | return; | 
|  |  | 
|  | if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) | 
|  | return; | 
|  |  | 
|  | mod_timer(&sdata->u.mgd.conn_mon_timer, | 
|  | round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); | 
|  |  | 
|  | ifmgd->probe_send_count = 0; | 
|  | } | 
|  |  | 
|  | static int ecw2cw(int ecw) | 
|  | { | 
|  | return (1 << ecw) - 1; | 
|  | } | 
|  |  | 
|  | static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_ht_operation *ht_oper, | 
|  | const u8 *bssid, bool reconfig) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct sta_info *sta; | 
|  | u32 changed = 0; | 
|  | u16 ht_opmode; | 
|  | bool disable_40 = false; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  |  | 
|  | switch (sdata->vif.bss_conf.channel_type) { | 
|  | case NL80211_CHAN_HT40PLUS: | 
|  | if (local->hw.conf.channel->flags & IEEE80211_CHAN_NO_HT40PLUS) | 
|  | disable_40 = true; | 
|  | break; | 
|  | case NL80211_CHAN_HT40MINUS: | 
|  | if (local->hw.conf.channel->flags & IEEE80211_CHAN_NO_HT40MINUS) | 
|  | disable_40 = true; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* This can change during the lifetime of the BSS */ | 
|  | if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) | 
|  | disable_40 = true; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get(sdata, bssid); | 
|  |  | 
|  | WARN_ON_ONCE(!sta); | 
|  |  | 
|  | if (sta && !sta->supports_40mhz) | 
|  | disable_40 = true; | 
|  |  | 
|  | if (sta && (!reconfig || | 
|  | (disable_40 != !(sta->sta.ht_cap.cap & | 
|  | IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) { | 
|  |  | 
|  | if (disable_40) | 
|  | sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | else | 
|  | sta->sta.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  |  | 
|  | rate_control_rate_update(local, sband, sta, | 
|  | IEEE80211_RC_BW_CHANGED); | 
|  | } | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | ht_opmode = le16_to_cpu(ht_oper->operation_mode); | 
|  |  | 
|  | /* if bss configuration changed store the new one */ | 
|  | if (!reconfig || (sdata->vif.bss_conf.ht_operation_mode != ht_opmode)) { | 
|  | changed |= BSS_CHANGED_HT; | 
|  | sdata->vif.bss_conf.ht_operation_mode = ht_opmode; | 
|  | } | 
|  |  | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | /* frame sending functions */ | 
|  |  | 
|  | static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len, | 
|  | struct ieee80211_supported_band *sband, | 
|  | u32 *rates) | 
|  | { | 
|  | int i, j, count; | 
|  | *rates = 0; | 
|  | count = 0; | 
|  | for (i = 0; i < supp_rates_len; i++) { | 
|  | int rate = (supp_rates[i] & 0x7F) * 5; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | *rates |= BIT(j); | 
|  | count++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb, const u8 *ht_oper_ie, | 
|  | struct ieee80211_supported_band *sband, | 
|  | struct ieee80211_channel *channel, | 
|  | enum ieee80211_smps_mode smps) | 
|  | { | 
|  | struct ieee80211_ht_operation *ht_oper; | 
|  | u8 *pos; | 
|  | u32 flags = channel->flags; | 
|  | u16 cap; | 
|  | struct ieee80211_sta_ht_cap ht_cap; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); | 
|  |  | 
|  | if (!ht_oper_ie) | 
|  | return; | 
|  |  | 
|  | if (ht_oper_ie[1] < sizeof(struct ieee80211_ht_operation)) | 
|  | return; | 
|  |  | 
|  | memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); | 
|  | ieee80211_apply_htcap_overrides(sdata, &ht_cap); | 
|  |  | 
|  | ht_oper = (struct ieee80211_ht_operation *)(ht_oper_ie + 2); | 
|  |  | 
|  | /* determine capability flags */ | 
|  | cap = ht_cap.cap; | 
|  |  | 
|  | switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | if (flags & IEEE80211_CHAN_NO_HT40PLUS) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | if (flags & IEEE80211_CHAN_NO_HT40MINUS) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If 40 MHz was disabled associate as though we weren't | 
|  | * capable of 40 MHz -- some broken APs will never fall | 
|  | * back to trying to transmit in 20 MHz. | 
|  | */ | 
|  | if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) { | 
|  | cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  |  | 
|  | /* set SM PS mode properly */ | 
|  | cap &= ~IEEE80211_HT_CAP_SM_PS; | 
|  | switch (smps) { | 
|  | case IEEE80211_SMPS_AUTOMATIC: | 
|  | case IEEE80211_SMPS_NUM_MODES: | 
|  | WARN_ON(1); | 
|  | case IEEE80211_SMPS_OFF: | 
|  | cap |= WLAN_HT_CAP_SM_PS_DISABLED << | 
|  | IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  | break; | 
|  | case IEEE80211_SMPS_STATIC: | 
|  | cap |= WLAN_HT_CAP_SM_PS_STATIC << | 
|  | IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  | break; | 
|  | case IEEE80211_SMPS_DYNAMIC: | 
|  | cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << | 
|  | IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* reserve and fill IE */ | 
|  | pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); | 
|  | ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); | 
|  | } | 
|  |  | 
|  | static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | u8 *pos, qos_info; | 
|  | size_t offset = 0, noffset; | 
|  | int i, count, rates_len, supp_rates_len; | 
|  | u16 capab; | 
|  | struct ieee80211_supported_band *sband; | 
|  | u32 rates = 0; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->oper_channel->band]; | 
|  |  | 
|  | if (assoc_data->supp_rates_len) { | 
|  | /* | 
|  | * Get all rates supported by the device and the AP as | 
|  | * some APs don't like getting a superset of their rates | 
|  | * in the association request (e.g. D-Link DAP 1353 in | 
|  | * b-only mode)... | 
|  | */ | 
|  | rates_len = ieee80211_compatible_rates(assoc_data->supp_rates, | 
|  | assoc_data->supp_rates_len, | 
|  | sband, &rates); | 
|  | } else { | 
|  | /* | 
|  | * In case AP not provide any supported rates information | 
|  | * before association, we send information element(s) with | 
|  | * all rates that we support. | 
|  | */ | 
|  | rates = ~0; | 
|  | rates_len = sband->n_bitrates; | 
|  | } | 
|  |  | 
|  | skb = alloc_skb(local->hw.extra_tx_headroom + | 
|  | sizeof(*mgmt) + /* bit too much but doesn't matter */ | 
|  | 2 + assoc_data->ssid_len + /* SSID */ | 
|  | 4 + rates_len + /* (extended) rates */ | 
|  | 4 + /* power capability */ | 
|  | 2 + 2 * sband->n_channels + /* supported channels */ | 
|  | 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ | 
|  | assoc_data->ie_len + /* extra IEs */ | 
|  | 9, /* WMM */ | 
|  | GFP_KERNEL); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | capab = WLAN_CAPABILITY_ESS; | 
|  |  | 
|  | if (sband->band == IEEE80211_BAND_2GHZ) { | 
|  | if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) | 
|  | capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; | 
|  | if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)) | 
|  | capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; | 
|  | } | 
|  |  | 
|  | if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY) | 
|  | capab |= WLAN_CAPABILITY_PRIVACY; | 
|  |  | 
|  | if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && | 
|  | (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)) | 
|  | capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; | 
|  |  | 
|  | mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); | 
|  | memset(mgmt, 0, 24); | 
|  | memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN); | 
|  | memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN); | 
|  |  | 
|  | if (!is_zero_ether_addr(assoc_data->prev_bssid)) { | 
|  | skb_put(skb, 10); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_REASSOC_REQ); | 
|  | mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); | 
|  | mgmt->u.reassoc_req.listen_interval = | 
|  | cpu_to_le16(local->hw.conf.listen_interval); | 
|  | memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid, | 
|  | ETH_ALEN); | 
|  | } else { | 
|  | skb_put(skb, 4); | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
|  | IEEE80211_STYPE_ASSOC_REQ); | 
|  | mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); | 
|  | mgmt->u.assoc_req.listen_interval = | 
|  | cpu_to_le16(local->hw.conf.listen_interval); | 
|  | } | 
|  |  | 
|  | /* SSID */ | 
|  | pos = skb_put(skb, 2 + assoc_data->ssid_len); | 
|  | *pos++ = WLAN_EID_SSID; | 
|  | *pos++ = assoc_data->ssid_len; | 
|  | memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); | 
|  |  | 
|  | /* add all rates which were marked to be used above */ | 
|  | supp_rates_len = rates_len; | 
|  | if (supp_rates_len > 8) | 
|  | supp_rates_len = 8; | 
|  |  | 
|  | pos = skb_put(skb, supp_rates_len + 2); | 
|  | *pos++ = WLAN_EID_SUPP_RATES; | 
|  | *pos++ = supp_rates_len; | 
|  |  | 
|  | count = 0; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (BIT(i) & rates) { | 
|  | int rate = sband->bitrates[i].bitrate; | 
|  | *pos++ = (u8) (rate / 5); | 
|  | if (++count == 8) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rates_len > count) { | 
|  | pos = skb_put(skb, rates_len - count + 2); | 
|  | *pos++ = WLAN_EID_EXT_SUPP_RATES; | 
|  | *pos++ = rates_len - count; | 
|  |  | 
|  | for (i++; i < sband->n_bitrates; i++) { | 
|  | if (BIT(i) & rates) { | 
|  | int rate = sband->bitrates[i].bitrate; | 
|  | *pos++ = (u8) (rate / 5); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { | 
|  | /* 1. power capabilities */ | 
|  | pos = skb_put(skb, 4); | 
|  | *pos++ = WLAN_EID_PWR_CAPABILITY; | 
|  | *pos++ = 2; | 
|  | *pos++ = 0; /* min tx power */ | 
|  | *pos++ = local->oper_channel->max_power; /* max tx power */ | 
|  |  | 
|  | /* 2. supported channels */ | 
|  | /* TODO: get this in reg domain format */ | 
|  | pos = skb_put(skb, 2 * sband->n_channels + 2); | 
|  | *pos++ = WLAN_EID_SUPPORTED_CHANNELS; | 
|  | *pos++ = 2 * sband->n_channels; | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | *pos++ = ieee80211_frequency_to_channel( | 
|  | sband->channels[i].center_freq); | 
|  | *pos++ = 1; /* one channel in the subband*/ | 
|  | } | 
|  | } | 
|  |  | 
|  | /* if present, add any custom IEs that go before HT */ | 
|  | if (assoc_data->ie_len && assoc_data->ie) { | 
|  | static const u8 before_ht[] = { | 
|  | WLAN_EID_SSID, | 
|  | WLAN_EID_SUPP_RATES, | 
|  | WLAN_EID_EXT_SUPP_RATES, | 
|  | WLAN_EID_PWR_CAPABILITY, | 
|  | WLAN_EID_SUPPORTED_CHANNELS, | 
|  | WLAN_EID_RSN, | 
|  | WLAN_EID_QOS_CAPA, | 
|  | WLAN_EID_RRM_ENABLED_CAPABILITIES, | 
|  | WLAN_EID_MOBILITY_DOMAIN, | 
|  | WLAN_EID_SUPPORTED_REGULATORY_CLASSES, | 
|  | }; | 
|  | noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, | 
|  | before_ht, ARRAY_SIZE(before_ht), | 
|  | offset); | 
|  | pos = skb_put(skb, noffset - offset); | 
|  | memcpy(pos, assoc_data->ie + offset, noffset - offset); | 
|  | offset = noffset; | 
|  | } | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) | 
|  | ieee80211_add_ht_ie(sdata, skb, assoc_data->ht_operation_ie, | 
|  | sband, local->oper_channel, ifmgd->ap_smps); | 
|  |  | 
|  | /* if present, add any custom non-vendor IEs that go after HT */ | 
|  | if (assoc_data->ie_len && assoc_data->ie) { | 
|  | noffset = ieee80211_ie_split_vendor(assoc_data->ie, | 
|  | assoc_data->ie_len, | 
|  | offset); | 
|  | pos = skb_put(skb, noffset - offset); | 
|  | memcpy(pos, assoc_data->ie + offset, noffset - offset); | 
|  | offset = noffset; | 
|  | } | 
|  |  | 
|  | if (assoc_data->wmm) { | 
|  | if (assoc_data->uapsd) { | 
|  | qos_info = ifmgd->uapsd_queues; | 
|  | qos_info |= (ifmgd->uapsd_max_sp_len << | 
|  | IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); | 
|  | } else { | 
|  | qos_info = 0; | 
|  | } | 
|  |  | 
|  | pos = skb_put(skb, 9); | 
|  | *pos++ = WLAN_EID_VENDOR_SPECIFIC; | 
|  | *pos++ = 7; /* len */ | 
|  | *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */ | 
|  | *pos++ = 0x50; | 
|  | *pos++ = 0xf2; | 
|  | *pos++ = 2; /* WME */ | 
|  | *pos++ = 0; /* WME info */ | 
|  | *pos++ = 1; /* WME ver */ | 
|  | *pos++ = qos_info; | 
|  | } | 
|  |  | 
|  | /* add any remaining custom (i.e. vendor specific here) IEs */ | 
|  | if (assoc_data->ie_len && assoc_data->ie) { | 
|  | noffset = assoc_data->ie_len; | 
|  | pos = skb_put(skb, noffset - offset); | 
|  | memcpy(pos, assoc_data->ie + offset, noffset - offset); | 
|  | } | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | } | 
|  |  | 
|  | static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | const u8 *bssid, u16 stype, | 
|  | u16 reason, bool send_frame, | 
|  | u8 *frame_buf) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_mgmt *mgmt = (void *)frame_buf; | 
|  |  | 
|  | /* build frame */ | 
|  | mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); | 
|  | mgmt->duration = 0; /* initialize only */ | 
|  | mgmt->seq_ctrl = 0; /* initialize only */ | 
|  | memcpy(mgmt->da, bssid, ETH_ALEN); | 
|  | memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(mgmt->bssid, bssid, ETH_ALEN); | 
|  | /* u.deauth.reason_code == u.disassoc.reason_code */ | 
|  | mgmt->u.deauth.reason_code = cpu_to_le16(reason); | 
|  |  | 
|  | if (send_frame) { | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + | 
|  | DEAUTH_DISASSOC_LEN); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | /* copy in frame */ | 
|  | memcpy(skb_put(skb, DEAUTH_DISASSOC_LEN), | 
|  | mgmt, DEAUTH_DISASSOC_LEN); | 
|  |  | 
|  | if (!(ifmgd->flags & IEEE80211_STA_MFP_ENABLED)) | 
|  | IEEE80211_SKB_CB(skb)->flags |= | 
|  | IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_send_pspoll(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_pspoll *pspoll; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | pspoll = (struct ieee80211_pspoll *) skb->data; | 
|  | pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | } | 
|  |  | 
|  | void ieee80211_send_nullfunc(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | int powersave) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_hdr_3addr *nullfunc; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | nullfunc = (struct ieee80211_hdr_3addr *) skb->data; | 
|  | if (powersave) | 
|  | nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | | 
|  | IEEE80211_STA_CONNECTION_POLL)) | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; | 
|  |  | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | } | 
|  |  | 
|  | static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_hdr *nullfunc; | 
|  | __le16 fc; | 
|  |  | 
|  | if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
|  | return; | 
|  |  | 
|  | skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | skb_reserve(skb, local->hw.extra_tx_headroom); | 
|  |  | 
|  | nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30); | 
|  | memset(nullfunc, 0, 30); | 
|  | fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | | 
|  | IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
|  | nullfunc->frame_control = fc; | 
|  | memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN); | 
|  | memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | 
|  | memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN); | 
|  | memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); | 
|  |  | 
|  | IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
|  | ieee80211_tx_skb(sdata, skb); | 
|  | } | 
|  |  | 
|  | /* spectrum management related things */ | 
|  | static void ieee80211_chswitch_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | if (!ifmgd->associated) | 
|  | goto out; | 
|  |  | 
|  | sdata->local->oper_channel = sdata->local->csa_channel; | 
|  | if (!sdata->local->ops->channel_switch) { | 
|  | /* call "hw_config" only if doing sw channel switch */ | 
|  | ieee80211_hw_config(sdata->local, | 
|  | IEEE80211_CONF_CHANGE_CHANNEL); | 
|  | } else { | 
|  | /* update the device channel directly */ | 
|  | sdata->local->hw.conf.channel = sdata->local->oper_channel; | 
|  | } | 
|  |  | 
|  | /* XXX: shouldn't really modify cfg80211-owned data! */ | 
|  | ifmgd->associated->channel = sdata->local->oper_channel; | 
|  |  | 
|  | ieee80211_wake_queues_by_reason(&sdata->local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | out: | 
|  | ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | } | 
|  |  | 
|  | void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  |  | 
|  | sdata = vif_to_sdata(vif); | 
|  | ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | trace_api_chswitch_done(sdata, success); | 
|  | if (!success) { | 
|  | /* | 
|  | * If the channel switch was not successful, stay | 
|  | * around on the old channel. We currently lack | 
|  | * good handling of this situation, possibly we | 
|  | * should just drop the association. | 
|  | */ | 
|  | sdata->local->csa_channel = sdata->local->oper_channel; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_chswitch_done); | 
|  |  | 
|  | static void ieee80211_chswitch_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (sdata->local->quiescing) { | 
|  | set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_channel_sw_ie *sw_elem, | 
|  | struct ieee80211_bss *bss, | 
|  | u64 timestamp) | 
|  | { | 
|  | struct cfg80211_bss *cbss = | 
|  | container_of((void *)bss, struct cfg80211_bss, priv); | 
|  | struct ieee80211_channel *new_ch; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num, | 
|  | cbss->channel->band); | 
|  |  | 
|  | ASSERT_MGD_MTX(ifmgd); | 
|  |  | 
|  | if (!ifmgd->associated) | 
|  | return; | 
|  |  | 
|  | if (sdata->local->scanning) | 
|  | return; | 
|  |  | 
|  | /* Disregard subsequent beacons if we are already running a timer | 
|  | processing a CSA */ | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) | 
|  | return; | 
|  |  | 
|  | new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); | 
|  | if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | sdata->local->csa_channel = new_ch; | 
|  |  | 
|  | if (sdata->local->ops->channel_switch) { | 
|  | /* use driver's channel switch callback */ | 
|  | struct ieee80211_channel_switch ch_switch; | 
|  | memset(&ch_switch, 0, sizeof(ch_switch)); | 
|  | ch_switch.timestamp = timestamp; | 
|  | if (sw_elem->mode) { | 
|  | ch_switch.block_tx = true; | 
|  | ieee80211_stop_queues_by_reason(&sdata->local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | } | 
|  | ch_switch.channel = new_ch; | 
|  | ch_switch.count = sw_elem->count; | 
|  | ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; | 
|  | drv_channel_switch(sdata->local, &ch_switch); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* channel switch handled in software */ | 
|  | if (sw_elem->count <= 1) { | 
|  | ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); | 
|  | } else { | 
|  | if (sw_elem->mode) | 
|  | ieee80211_stop_queues_by_reason(&sdata->local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; | 
|  | mod_timer(&ifmgd->chswitch_timer, | 
|  | jiffies + | 
|  | msecs_to_jiffies(sw_elem->count * | 
|  | cbss->beacon_interval)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, | 
|  | u16 capab_info, u8 *pwr_constr_elem, | 
|  | u8 pwr_constr_elem_len) | 
|  | { | 
|  | struct ieee80211_conf *conf = &sdata->local->hw.conf; | 
|  |  | 
|  | if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT)) | 
|  | return; | 
|  |  | 
|  | /* Power constraint IE length should be 1 octet */ | 
|  | if (pwr_constr_elem_len != 1) | 
|  | return; | 
|  |  | 
|  | if ((*pwr_constr_elem <= conf->channel->max_reg_power) && | 
|  | (*pwr_constr_elem != sdata->local->power_constr_level)) { | 
|  | sdata->local->power_constr_level = *pwr_constr_elem; | 
|  | ieee80211_hw_config(sdata->local, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  |  | 
|  | WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || | 
|  | !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || | 
|  | (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); | 
|  |  | 
|  | local->disable_dynamic_ps = false; | 
|  | conf->dynamic_ps_timeout = local->dynamic_ps_user_timeout; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_enable_dyn_ps); | 
|  |  | 
|  | void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  |  | 
|  | WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || | 
|  | !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || | 
|  | (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); | 
|  |  | 
|  | local->disable_dynamic_ps = true; | 
|  | conf->dynamic_ps_timeout = 0; | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | ieee80211_queue_work(&local->hw, | 
|  | &local->dynamic_ps_enable_work); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_disable_dyn_ps); | 
|  |  | 
|  | /* powersave */ | 
|  | static void ieee80211_enable_ps(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  |  | 
|  | /* | 
|  | * If we are scanning right now then the parameters will | 
|  | * take effect when scan finishes. | 
|  | */ | 
|  | if (local->scanning) | 
|  | return; | 
|  |  | 
|  | if (conf->dynamic_ps_timeout > 0 && | 
|  | !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) { | 
|  | mod_timer(&local->dynamic_ps_timer, jiffies + | 
|  | msecs_to_jiffies(conf->dynamic_ps_timeout)); | 
|  | } else { | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) | 
|  | ieee80211_send_nullfunc(local, sdata, 1); | 
|  |  | 
|  | if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) && | 
|  | (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) | 
|  | return; | 
|  |  | 
|  | conf->flags |= IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_change_ps(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  |  | 
|  | if (local->ps_sdata) { | 
|  | ieee80211_enable_ps(local, local->ps_sdata); | 
|  | } else if (conf->flags & IEEE80211_CONF_PS) { | 
|  | conf->flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | cancel_work_sync(&local->dynamic_ps_enable_work); | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *mgd = &sdata->u.mgd; | 
|  | struct sta_info *sta = NULL; | 
|  | bool authorized = false; | 
|  |  | 
|  | if (!mgd->powersave) | 
|  | return false; | 
|  |  | 
|  | if (mgd->broken_ap) | 
|  | return false; | 
|  |  | 
|  | if (!mgd->associated) | 
|  | return false; | 
|  |  | 
|  | if (!mgd->associated->beacon_ies) | 
|  | return false; | 
|  |  | 
|  | if (mgd->flags & (IEEE80211_STA_BEACON_POLL | | 
|  | IEEE80211_STA_CONNECTION_POLL)) | 
|  | return false; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | sta = sta_info_get(sdata, mgd->bssid); | 
|  | if (sta) | 
|  | authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return authorized; | 
|  | } | 
|  |  | 
|  | /* need to hold RTNL or interface lock */ | 
|  | void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata, *found = NULL; | 
|  | int count = 0; | 
|  | int timeout; | 
|  |  | 
|  | if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) { | 
|  | local->ps_sdata = NULL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!list_empty(&local->work_list)) { | 
|  | local->ps_sdata = NULL; | 
|  | goto change; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | continue; | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | /* If an AP vif is found, then disable PS | 
|  | * by setting the count to zero thereby setting | 
|  | * ps_sdata to NULL. | 
|  | */ | 
|  | count = 0; | 
|  | break; | 
|  | } | 
|  | if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
|  | continue; | 
|  | found = sdata; | 
|  | count++; | 
|  | } | 
|  |  | 
|  | if (count == 1 && ieee80211_powersave_allowed(found)) { | 
|  | struct ieee80211_conf *conf = &local->hw.conf; | 
|  | s32 beaconint_us; | 
|  |  | 
|  | if (latency < 0) | 
|  | latency = pm_qos_request(PM_QOS_NETWORK_LATENCY); | 
|  |  | 
|  | beaconint_us = ieee80211_tu_to_usec( | 
|  | found->vif.bss_conf.beacon_int); | 
|  |  | 
|  | timeout = local->dynamic_ps_forced_timeout; | 
|  | if (timeout < 0) { | 
|  | /* | 
|  | * Go to full PSM if the user configures a very low | 
|  | * latency requirement. | 
|  | * The 2000 second value is there for compatibility | 
|  | * until the PM_QOS_NETWORK_LATENCY is configured | 
|  | * with real values. | 
|  | */ | 
|  | if (latency > (1900 * USEC_PER_MSEC) && | 
|  | latency != (2000 * USEC_PER_SEC)) | 
|  | timeout = 0; | 
|  | else | 
|  | timeout = 100; | 
|  | } | 
|  | local->dynamic_ps_user_timeout = timeout; | 
|  | if (!local->disable_dynamic_ps) | 
|  | conf->dynamic_ps_timeout = | 
|  | local->dynamic_ps_user_timeout; | 
|  |  | 
|  | if (beaconint_us > latency) { | 
|  | local->ps_sdata = NULL; | 
|  | } else { | 
|  | struct ieee80211_bss *bss; | 
|  | int maxslp = 1; | 
|  | u8 dtimper; | 
|  |  | 
|  | bss = (void *)found->u.mgd.associated->priv; | 
|  | dtimper = bss->dtim_period; | 
|  |  | 
|  | /* If the TIM IE is invalid, pretend the value is 1 */ | 
|  | if (!dtimper) | 
|  | dtimper = 1; | 
|  | else if (dtimper > 1) | 
|  | maxslp = min_t(int, dtimper, | 
|  | latency / beaconint_us); | 
|  |  | 
|  | local->hw.conf.max_sleep_period = maxslp; | 
|  | local->hw.conf.ps_dtim_period = dtimper; | 
|  | local->ps_sdata = found; | 
|  | } | 
|  | } else { | 
|  | local->ps_sdata = NULL; | 
|  | } | 
|  |  | 
|  | change: | 
|  | ieee80211_change_ps(local); | 
|  | } | 
|  |  | 
|  | void ieee80211_dynamic_ps_disable_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_local *local = | 
|  | container_of(work, struct ieee80211_local, | 
|  | dynamic_ps_disable_work); | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  |  | 
|  | ieee80211_wake_queues_by_reason(&local->hw, | 
|  | IEEE80211_QUEUE_STOP_REASON_PS); | 
|  | } | 
|  |  | 
|  | void ieee80211_dynamic_ps_enable_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_local *local = | 
|  | container_of(work, struct ieee80211_local, | 
|  | dynamic_ps_enable_work); | 
|  | struct ieee80211_sub_if_data *sdata = local->ps_sdata; | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  | unsigned long flags; | 
|  | int q; | 
|  |  | 
|  | /* can only happen when PS was just disabled anyway */ | 
|  | if (!sdata) | 
|  | return; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) | 
|  | return; | 
|  |  | 
|  | if (!local->disable_dynamic_ps && | 
|  | local->hw.conf.dynamic_ps_timeout > 0) { | 
|  | /* don't enter PS if TX frames are pending */ | 
|  | if (drv_tx_frames_pending(local)) { | 
|  | mod_timer(&local->dynamic_ps_timer, jiffies + | 
|  | msecs_to_jiffies( | 
|  | local->hw.conf.dynamic_ps_timeout)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * transmission can be stopped by others which leads to | 
|  | * dynamic_ps_timer expiry. Postpone the ps timer if it | 
|  | * is not the actual idle state. | 
|  | */ | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | for (q = 0; q < local->hw.queues; q++) { | 
|  | if (local->queue_stop_reasons[q]) { | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, | 
|  | flags); | 
|  | mod_timer(&local->dynamic_ps_timer, jiffies + | 
|  | msecs_to_jiffies( | 
|  | local->hw.conf.dynamic_ps_timeout)); | 
|  | return; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  | } | 
|  |  | 
|  | if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) && | 
|  | !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { | 
|  | netif_tx_stop_all_queues(sdata->dev); | 
|  |  | 
|  | if (drv_tx_frames_pending(local)) | 
|  | mod_timer(&local->dynamic_ps_timer, jiffies + | 
|  | msecs_to_jiffies( | 
|  | local->hw.conf.dynamic_ps_timeout)); | 
|  | else { | 
|  | ieee80211_send_nullfunc(local, sdata, 1); | 
|  | /* Flush to get the tx status of nullfunc frame */ | 
|  | drv_flush(local, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) && | 
|  | (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) || | 
|  | (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { | 
|  | ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; | 
|  | local->hw.conf.flags |= IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) | 
|  | netif_tx_wake_all_queues(sdata->dev); | 
|  | } | 
|  |  | 
|  | void ieee80211_dynamic_ps_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_local *local = (void *) data; | 
|  |  | 
|  | if (local->quiescing || local->suspended) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); | 
|  | } | 
|  |  | 
|  | /* MLME */ | 
|  | static void ieee80211_sta_wmm_params(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | u8 *wmm_param, size_t wmm_param_len) | 
|  | { | 
|  | struct ieee80211_tx_queue_params params; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | size_t left; | 
|  | int count; | 
|  | u8 *pos, uapsd_queues = 0; | 
|  |  | 
|  | if (!local->ops->conf_tx) | 
|  | return; | 
|  |  | 
|  | if (local->hw.queues < IEEE80211_NUM_ACS) | 
|  | return; | 
|  |  | 
|  | if (!wmm_param) | 
|  | return; | 
|  |  | 
|  | if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) | 
|  | return; | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) | 
|  | uapsd_queues = ifmgd->uapsd_queues; | 
|  |  | 
|  | count = wmm_param[6] & 0x0f; | 
|  | if (count == ifmgd->wmm_last_param_set) | 
|  | return; | 
|  | ifmgd->wmm_last_param_set = count; | 
|  |  | 
|  | pos = wmm_param + 8; | 
|  | left = wmm_param_len - 8; | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  |  | 
|  | local->wmm_acm = 0; | 
|  | for (; left >= 4; left -= 4, pos += 4) { | 
|  | int aci = (pos[0] >> 5) & 0x03; | 
|  | int acm = (pos[0] >> 4) & 0x01; | 
|  | bool uapsd = false; | 
|  | int queue; | 
|  |  | 
|  | switch (aci) { | 
|  | case 1: /* AC_BK */ | 
|  | queue = 3; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ | 
|  | if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) | 
|  | uapsd = true; | 
|  | break; | 
|  | case 2: /* AC_VI */ | 
|  | queue = 1; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ | 
|  | if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) | 
|  | uapsd = true; | 
|  | break; | 
|  | case 3: /* AC_VO */ | 
|  | queue = 0; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ | 
|  | if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) | 
|  | uapsd = true; | 
|  | break; | 
|  | case 0: /* AC_BE */ | 
|  | default: | 
|  | queue = 2; | 
|  | if (acm) | 
|  | local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ | 
|  | if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) | 
|  | uapsd = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | params.aifs = pos[0] & 0x0f; | 
|  | params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4); | 
|  | params.cw_min = ecw2cw(pos[1] & 0x0f); | 
|  | params.txop = get_unaligned_le16(pos + 2); | 
|  | params.uapsd = uapsd; | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "WMM queue=%d aci=%d acm=%d aifs=%d " | 
|  | "cWmin=%d cWmax=%d txop=%d uapsd=%d\n", | 
|  | queue, aci, acm, | 
|  | params.aifs, params.cw_min, params.cw_max, | 
|  | params.txop, params.uapsd); | 
|  | #endif | 
|  | sdata->tx_conf[queue] = params; | 
|  | if (drv_conf_tx(local, sdata, queue, ¶ms)) | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "failed to set TX queue parameters for queue %d\n", | 
|  | queue); | 
|  | } | 
|  |  | 
|  | /* enable WMM or activate new settings */ | 
|  | sdata->vif.bss_conf.qos = true; | 
|  | } | 
|  |  | 
|  | static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, | 
|  | u16 capab, bool erp_valid, u8 erp) | 
|  | { | 
|  | struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
|  | u32 changed = 0; | 
|  | bool use_protection; | 
|  | bool use_short_preamble; | 
|  | bool use_short_slot; | 
|  |  | 
|  | if (erp_valid) { | 
|  | use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; | 
|  | use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; | 
|  | } else { | 
|  | use_protection = false; | 
|  | use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); | 
|  | } | 
|  |  | 
|  | use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); | 
|  | if (sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) | 
|  | use_short_slot = true; | 
|  |  | 
|  | if (use_protection != bss_conf->use_cts_prot) { | 
|  | bss_conf->use_cts_prot = use_protection; | 
|  | changed |= BSS_CHANGED_ERP_CTS_PROT; | 
|  | } | 
|  |  | 
|  | if (use_short_preamble != bss_conf->use_short_preamble) { | 
|  | bss_conf->use_short_preamble = use_short_preamble; | 
|  | changed |= BSS_CHANGED_ERP_PREAMBLE; | 
|  | } | 
|  |  | 
|  | if (use_short_slot != bss_conf->use_short_slot) { | 
|  | bss_conf->use_short_slot = use_short_slot; | 
|  | changed |= BSS_CHANGED_ERP_SLOT; | 
|  | } | 
|  |  | 
|  | return changed; | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_bss *cbss, | 
|  | u32 bss_info_changed) | 
|  | { | 
|  | struct ieee80211_bss *bss = (void *)cbss->priv; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
|  |  | 
|  | bss_info_changed |= BSS_CHANGED_ASSOC; | 
|  | /* set timing information */ | 
|  | bss_conf->beacon_int = cbss->beacon_interval; | 
|  | bss_conf->last_tsf = cbss->tsf; | 
|  |  | 
|  | bss_info_changed |= BSS_CHANGED_BEACON_INT; | 
|  | bss_info_changed |= ieee80211_handle_bss_capability(sdata, | 
|  | cbss->capability, bss->has_erp_value, bss->erp_value); | 
|  |  | 
|  | sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec( | 
|  | IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int)); | 
|  |  | 
|  | sdata->u.mgd.associated = cbss; | 
|  | memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN); | 
|  |  | 
|  | sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE; | 
|  |  | 
|  | /* just to be sure */ | 
|  | sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | | 
|  | IEEE80211_STA_BEACON_POLL); | 
|  |  | 
|  | ieee80211_led_assoc(local, 1); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) | 
|  | bss_conf->dtim_period = bss->dtim_period; | 
|  | else | 
|  | bss_conf->dtim_period = 0; | 
|  |  | 
|  | bss_conf->assoc = 1; | 
|  |  | 
|  | /* Tell the driver to monitor connection quality (if supported) */ | 
|  | if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && | 
|  | bss_conf->cqm_rssi_thold) | 
|  | bss_info_changed |= BSS_CHANGED_CQM; | 
|  |  | 
|  | /* Enable ARP filtering */ | 
|  | if (bss_conf->arp_filter_enabled != sdata->arp_filter_state) { | 
|  | bss_conf->arp_filter_enabled = sdata->arp_filter_state; | 
|  | bss_info_changed |= BSS_CHANGED_ARP_FILTER; | 
|  | } | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, bss_info_changed); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | ieee80211_recalc_smps(local); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | netif_tx_start_all_queues(sdata->dev); | 
|  | netif_carrier_on(sdata->dev); | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | u16 stype, u16 reason, bool tx, | 
|  | u8 *frame_buf) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sta_info *sta; | 
|  | u32 changed = 0; | 
|  | u8 bssid[ETH_ALEN]; | 
|  |  | 
|  | ASSERT_MGD_MTX(ifmgd); | 
|  |  | 
|  | if (WARN_ON_ONCE(tx && !frame_buf)) | 
|  | return; | 
|  |  | 
|  | if (WARN_ON(!ifmgd->associated)) | 
|  | return; | 
|  |  | 
|  | memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); | 
|  |  | 
|  | ifmgd->associated = NULL; | 
|  | memset(ifmgd->bssid, 0, ETH_ALEN); | 
|  |  | 
|  | /* | 
|  | * we need to commit the associated = NULL change because the | 
|  | * scan code uses that to determine whether this iface should | 
|  | * go to/wake up from powersave or not -- and could otherwise | 
|  | * wake the queues erroneously. | 
|  | */ | 
|  | smp_mb(); | 
|  |  | 
|  | /* | 
|  | * Thus, we can only afterwards stop the queues -- to account | 
|  | * for the case where another CPU is finishing a scan at this | 
|  | * time -- we don't want the scan code to enable queues. | 
|  | */ | 
|  |  | 
|  | netif_tx_stop_all_queues(sdata->dev); | 
|  | netif_carrier_off(sdata->dev); | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get(sdata, bssid); | 
|  | if (sta) { | 
|  | set_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
|  | ieee80211_sta_tear_down_BA_sessions(sta, tx); | 
|  | } | 
|  | mutex_unlock(&local->sta_mtx); | 
|  |  | 
|  | /* deauthenticate/disassociate now */ | 
|  | if (tx || frame_buf) | 
|  | ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason, | 
|  | tx, frame_buf); | 
|  |  | 
|  | /* flush out frame */ | 
|  | if (tx) | 
|  | drv_flush(local, false); | 
|  |  | 
|  | /* remove AP and TDLS peers */ | 
|  | sta_info_flush(local, sdata); | 
|  |  | 
|  | /* finally reset all BSS / config parameters */ | 
|  | changed |= ieee80211_reset_erp_info(sdata); | 
|  |  | 
|  | ieee80211_led_assoc(local, 0); | 
|  | changed |= BSS_CHANGED_ASSOC; | 
|  | sdata->vif.bss_conf.assoc = false; | 
|  |  | 
|  | /* on the next assoc, re-program HT parameters */ | 
|  | memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); | 
|  | memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); | 
|  |  | 
|  | local->power_constr_level = 0; | 
|  |  | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | cancel_work_sync(&local->dynamic_ps_enable_work); | 
|  |  | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  | local->ps_sdata = NULL; | 
|  |  | 
|  | /* Disable ARP filtering */ | 
|  | if (sdata->vif.bss_conf.arp_filter_enabled) { | 
|  | sdata->vif.bss_conf.arp_filter_enabled = false; | 
|  | changed |= BSS_CHANGED_ARP_FILTER; | 
|  | } | 
|  |  | 
|  | sdata->vif.bss_conf.qos = false; | 
|  | changed |= BSS_CHANGED_QOS; | 
|  |  | 
|  | /* The BSSID (not really interesting) and HT changed */ | 
|  | changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  |  | 
|  | /* channel(_type) changes are handled by ieee80211_hw_config */ | 
|  | WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT)); | 
|  | ieee80211_hw_config(local, 0); | 
|  |  | 
|  | /* disassociated - set to defaults now */ | 
|  | ieee80211_set_wmm_default(sdata, false); | 
|  |  | 
|  | del_timer_sync(&sdata->u.mgd.conn_mon_timer); | 
|  | del_timer_sync(&sdata->u.mgd.bcn_mon_timer); | 
|  | del_timer_sync(&sdata->u.mgd.timer); | 
|  | del_timer_sync(&sdata->u.mgd.chswitch_timer); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_hdr *hdr) | 
|  | { | 
|  | /* | 
|  | * We can postpone the mgd.timer whenever receiving unicast frames | 
|  | * from AP because we know that the connection is working both ways | 
|  | * at that time. But multicast frames (and hence also beacons) must | 
|  | * be ignored here, because we need to trigger the timer during | 
|  | * data idle periods for sending the periodic probe request to the | 
|  | * AP we're connected to. | 
|  | */ | 
|  | if (is_multicast_ether_addr(hdr->addr1)) | 
|  | return; | 
|  |  | 
|  | ieee80211_sta_reset_conn_monitor(sdata); | 
|  | } | 
|  |  | 
|  | static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL | | 
|  | IEEE80211_STA_CONNECTION_POLL))) { | 
|  | mutex_unlock(&local->mtx); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL | | 
|  | IEEE80211_STA_BEACON_POLL); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * We've received a probe response, but are not sure whether | 
|  | * we have or will be receiving any beacons or data, so let's | 
|  | * schedule the timers again, just in case. | 
|  | */ | 
|  | ieee80211_sta_reset_beacon_monitor(sdata); | 
|  |  | 
|  | mod_timer(&ifmgd->conn_mon_timer, | 
|  | round_jiffies_up(jiffies + | 
|  | IEEE80211_CONNECTION_IDLE_TIME)); | 
|  | out: | 
|  | ieee80211_run_deferred_scan(local); | 
|  | mutex_unlock(&local->mtx); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_hdr *hdr, bool ack) | 
|  | { | 
|  | if (!ieee80211_is_data(hdr->frame_control)) | 
|  | return; | 
|  |  | 
|  | if (ack) | 
|  | ieee80211_sta_reset_conn_monitor(sdata); | 
|  |  | 
|  | if (ieee80211_is_nullfunc(hdr->frame_control) && | 
|  | sdata->u.mgd.probe_send_count > 0) { | 
|  | if (ack) | 
|  | sdata->u.mgd.probe_send_count = 0; | 
|  | else | 
|  | sdata->u.mgd.nullfunc_failed = true; | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | const u8 *ssid; | 
|  | u8 *dst = ifmgd->associated->bssid; | 
|  | u8 unicast_limit = max(1, max_probe_tries - 3); | 
|  |  | 
|  | /* | 
|  | * Try sending broadcast probe requests for the last three | 
|  | * probe requests after the first ones failed since some | 
|  | * buggy APs only support broadcast probe requests. | 
|  | */ | 
|  | if (ifmgd->probe_send_count >= unicast_limit) | 
|  | dst = NULL; | 
|  |  | 
|  | /* | 
|  | * When the hardware reports an accurate Tx ACK status, it's | 
|  | * better to send a nullfunc frame instead of a probe request, | 
|  | * as it will kick us off the AP quickly if we aren't associated | 
|  | * anymore. The timeout will be reset if the frame is ACKed by | 
|  | * the AP. | 
|  | */ | 
|  | ifmgd->probe_send_count++; | 
|  |  | 
|  | if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { | 
|  | ifmgd->nullfunc_failed = false; | 
|  | ieee80211_send_nullfunc(sdata->local, sdata, 0); | 
|  | } else { | 
|  | int ssid_len; | 
|  |  | 
|  | ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); | 
|  | if (WARN_ON_ONCE(ssid == NULL)) | 
|  | ssid_len = 0; | 
|  | else | 
|  | ssid_len = ssid[1]; | 
|  |  | 
|  | ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL, | 
|  | 0, (u32) -1, true, false); | 
|  | } | 
|  |  | 
|  | ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); | 
|  | run_again(ifmgd, ifmgd->probe_timeout); | 
|  | if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) | 
|  | drv_flush(sdata->local, false); | 
|  | } | 
|  |  | 
|  | static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, | 
|  | bool beacon) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | bool already = false; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | if (!ifmgd->associated) | 
|  | goto out; | 
|  |  | 
|  | mutex_lock(&sdata->local->mtx); | 
|  |  | 
|  | if (sdata->local->tmp_channel || sdata->local->scanning) { | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | if (beacon) | 
|  | net_dbg_ratelimited("%s: detected beacon loss from AP - sending probe request\n", | 
|  | sdata->name); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * The driver/our work has already reported this event or the | 
|  | * connection monitoring has kicked in and we have already sent | 
|  | * a probe request. Or maybe the AP died and the driver keeps | 
|  | * reporting until we disassociate... | 
|  | * | 
|  | * In either case we have to ignore the current call to this | 
|  | * function (except for setting the correct probe reason bit) | 
|  | * because otherwise we would reset the timer every time and | 
|  | * never check whether we received a probe response! | 
|  | */ | 
|  | if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | | 
|  | IEEE80211_STA_CONNECTION_POLL)) | 
|  | already = true; | 
|  |  | 
|  | if (beacon) | 
|  | ifmgd->flags |= IEEE80211_STA_BEACON_POLL; | 
|  | else | 
|  | ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; | 
|  |  | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  |  | 
|  | if (already) | 
|  | goto out; | 
|  |  | 
|  | mutex_lock(&sdata->local->iflist_mtx); | 
|  | ieee80211_recalc_ps(sdata->local, -1); | 
|  | mutex_unlock(&sdata->local->iflist_mtx); | 
|  |  | 
|  | ifmgd->probe_send_count = 0; | 
|  | ieee80211_mgd_probe_ap_send(sdata); | 
|  | out: | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | } | 
|  |  | 
|  | struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct sk_buff *skb; | 
|  | const u8 *ssid; | 
|  | int ssid_len; | 
|  |  | 
|  | if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
|  | return NULL; | 
|  |  | 
|  | ASSERT_MGD_MTX(ifmgd); | 
|  |  | 
|  | if (!ifmgd->associated) | 
|  | return NULL; | 
|  |  | 
|  | ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); | 
|  | if (WARN_ON_ONCE(ssid == NULL)) | 
|  | ssid_len = 0; | 
|  | else | 
|  | ssid_len = ssid[1]; | 
|  |  | 
|  | skb = ieee80211_build_probe_req(sdata, ifmgd->associated->bssid, | 
|  | (u32) -1, ssid + 2, ssid_len, | 
|  | NULL, 0, true); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_ap_probereq_get); | 
|  |  | 
|  | static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u8 bssid[ETH_ALEN]; | 
|  | u8 frame_buf[DEAUTH_DISASSOC_LEN]; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | if (!ifmgd->associated) { | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: Connection to AP %pM lost.\n", | 
|  | sdata->name, bssid); | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, | 
|  | WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, | 
|  | false, frame_buf); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | /* | 
|  | * must be outside lock due to cfg80211, | 
|  | * but that's not a problem. | 
|  | */ | 
|  | cfg80211_send_deauth(sdata->dev, frame_buf, DEAUTH_DISASSOC_LEN); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  | } | 
|  |  | 
|  | void ieee80211_beacon_connection_loss_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, | 
|  | u.mgd.beacon_connection_loss_work); | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | if (ifmgd->associated) { | 
|  | rcu_read_lock(); | 
|  | sta = sta_info_get(sdata, ifmgd->bssid); | 
|  | if (sta) | 
|  | sta->beacon_loss_count++; | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) | 
|  | __ieee80211_connection_loss(sdata); | 
|  | else | 
|  | ieee80211_mgd_probe_ap(sdata, true); | 
|  | } | 
|  |  | 
|  | void ieee80211_beacon_loss(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_hw *hw = &sdata->local->hw; | 
|  |  | 
|  | trace_api_beacon_loss(sdata); | 
|  |  | 
|  | WARN_ON(hw->flags & IEEE80211_HW_CONNECTION_MONITOR); | 
|  | ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_beacon_loss); | 
|  |  | 
|  | void ieee80211_connection_loss(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | struct ieee80211_hw *hw = &sdata->local->hw; | 
|  |  | 
|  | trace_api_connection_loss(sdata); | 
|  |  | 
|  | WARN_ON(!(hw->flags & IEEE80211_HW_CONNECTION_MONITOR)); | 
|  | ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_connection_loss); | 
|  |  | 
|  |  | 
|  | static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, | 
|  | bool assoc) | 
|  | { | 
|  | struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; | 
|  |  | 
|  | lockdep_assert_held(&sdata->u.mgd.mtx); | 
|  |  | 
|  | if (!assoc) { | 
|  | sta_info_destroy_addr(sdata, auth_data->bss->bssid); | 
|  |  | 
|  | memset(sdata->u.mgd.bssid, 0, ETH_ALEN); | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); | 
|  | } | 
|  |  | 
|  | cfg80211_put_bss(auth_data->bss); | 
|  | kfree(auth_data); | 
|  | sdata->u.mgd.auth_data = NULL; | 
|  | } | 
|  |  | 
|  | static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; | 
|  | u8 *pos; | 
|  | struct ieee802_11_elems elems; | 
|  |  | 
|  | pos = mgmt->u.auth.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  | if (!elems.challenge) | 
|  | return; | 
|  | auth_data->expected_transaction = 4; | 
|  | ieee80211_send_auth(sdata, 3, auth_data->algorithm, | 
|  | elems.challenge - 2, elems.challenge_len + 2, | 
|  | auth_data->bss->bssid, auth_data->bss->bssid, | 
|  | auth_data->key, auth_data->key_len, | 
|  | auth_data->key_idx); | 
|  | } | 
|  |  | 
|  | static enum rx_mgmt_action __must_check | 
|  | ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u8 bssid[ETH_ALEN]; | 
|  | u16 auth_alg, auth_transaction, status_code; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | if (len < 24 + 6) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | if (!ifmgd->auth_data || ifmgd->auth_data->done) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); | 
|  |  | 
|  | if (!ether_addr_equal(bssid, mgmt->bssid)) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); | 
|  | auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); | 
|  | status_code = le16_to_cpu(mgmt->u.auth.status_code); | 
|  |  | 
|  | if (auth_alg != ifmgd->auth_data->algorithm || | 
|  | auth_transaction != ifmgd->auth_data->expected_transaction) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | if (status_code != WLAN_STATUS_SUCCESS) { | 
|  | printk(KERN_DEBUG "%s: %pM denied authentication (status %d)\n", | 
|  | sdata->name, mgmt->sa, status_code); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | switch (ifmgd->auth_data->algorithm) { | 
|  | case WLAN_AUTH_OPEN: | 
|  | case WLAN_AUTH_LEAP: | 
|  | case WLAN_AUTH_FT: | 
|  | break; | 
|  | case WLAN_AUTH_SHARED_KEY: | 
|  | if (ifmgd->auth_data->expected_transaction != 4) { | 
|  | ieee80211_auth_challenge(sdata, mgmt, len); | 
|  | /* need another frame */ | 
|  | return RX_MGMT_NONE; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | WARN_ONCE(1, "invalid auth alg %d", | 
|  | ifmgd->auth_data->algorithm); | 
|  | return RX_MGMT_NONE; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: authenticated\n", sdata->name); | 
|  | out: | 
|  | ifmgd->auth_data->done = true; | 
|  | ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; | 
|  | run_again(ifmgd, ifmgd->auth_data->timeout); | 
|  |  | 
|  | /* move station state to auth */ | 
|  | mutex_lock(&sdata->local->sta_mtx); | 
|  | sta = sta_info_get(sdata, bssid); | 
|  | if (!sta) { | 
|  | WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid); | 
|  | goto out_err; | 
|  | } | 
|  | if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { | 
|  | printk(KERN_DEBUG "%s: failed moving %pM to auth\n", | 
|  | sdata->name, bssid); | 
|  | goto out_err; | 
|  | } | 
|  | mutex_unlock(&sdata->local->sta_mtx); | 
|  |  | 
|  | return RX_MGMT_CFG80211_RX_AUTH; | 
|  | out_err: | 
|  | mutex_unlock(&sdata->local->sta_mtx); | 
|  | /* ignore frame -- wait for timeout */ | 
|  | return RX_MGMT_NONE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static enum rx_mgmt_action __must_check | 
|  | ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | const u8 *bssid = NULL; | 
|  | u16 reason_code; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | if (len < 24 + 2) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | if (!ifmgd->associated || | 
|  | !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | bssid = ifmgd->associated->bssid; | 
|  |  | 
|  | reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: deauthenticated from %pM (Reason: %u)\n", | 
|  | sdata->name, bssid, reason_code); | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, 0, 0, false, NULL); | 
|  |  | 
|  | mutex_lock(&sdata->local->mtx); | 
|  | ieee80211_recalc_idle(sdata->local); | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  |  | 
|  | return RX_MGMT_CFG80211_DEAUTH; | 
|  | } | 
|  |  | 
|  |  | 
|  | static enum rx_mgmt_action __must_check | 
|  | ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u16 reason_code; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | if (len < 24 + 2) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | if (!ifmgd->associated || | 
|  | !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n", | 
|  | sdata->name, mgmt->sa, reason_code); | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, 0, 0, false, NULL); | 
|  |  | 
|  | mutex_lock(&sdata->local->mtx); | 
|  | ieee80211_recalc_idle(sdata->local); | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  |  | 
|  | return RX_MGMT_CFG80211_DISASSOC; | 
|  | } | 
|  |  | 
|  | static void ieee80211_get_rates(struct ieee80211_supported_band *sband, | 
|  | u8 *supp_rates, unsigned int supp_rates_len, | 
|  | u32 *rates, u32 *basic_rates, | 
|  | bool *have_higher_than_11mbit, | 
|  | int *min_rate, int *min_rate_index) | 
|  | { | 
|  | int i, j; | 
|  |  | 
|  | for (i = 0; i < supp_rates_len; i++) { | 
|  | int rate = (supp_rates[i] & 0x7f) * 5; | 
|  | bool is_basic = !!(supp_rates[i] & 0x80); | 
|  |  | 
|  | if (rate > 110) | 
|  | *have_higher_than_11mbit = true; | 
|  |  | 
|  | /* | 
|  | * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009 | 
|  | * 7.3.2.2 as a magic value instead of a rate. Hence, skip it. | 
|  | * | 
|  | * Note: Even through the membership selector and the basic | 
|  | *	 rate flag share the same bit, they are not exactly | 
|  | *	 the same. | 
|  | */ | 
|  | if (!!(supp_rates[i] & 0x80) && | 
|  | (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) { | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | *rates |= BIT(j); | 
|  | if (is_basic) | 
|  | *basic_rates |= BIT(j); | 
|  | if (rate < *min_rate) { | 
|  | *min_rate = rate; | 
|  | *min_rate_index = j; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, | 
|  | bool assoc) | 
|  | { | 
|  | struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; | 
|  |  | 
|  | lockdep_assert_held(&sdata->u.mgd.mtx); | 
|  |  | 
|  | if (!assoc) { | 
|  | sta_info_destroy_addr(sdata, assoc_data->bss->bssid); | 
|  |  | 
|  | memset(sdata->u.mgd.bssid, 0, ETH_ALEN); | 
|  | ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); | 
|  | } | 
|  |  | 
|  | kfree(assoc_data); | 
|  | sdata->u.mgd.assoc_data = NULL; | 
|  | } | 
|  |  | 
|  | static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_bss *cbss, | 
|  | struct ieee80211_mgmt *mgmt, size_t len) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct sta_info *sta; | 
|  | u8 *pos; | 
|  | u16 capab_info, aid; | 
|  | struct ieee802_11_elems elems; | 
|  | struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
|  | u32 changed = 0; | 
|  | int err; | 
|  |  | 
|  | /* AssocResp and ReassocResp have identical structure */ | 
|  |  | 
|  | aid = le16_to_cpu(mgmt->u.assoc_resp.aid); | 
|  | capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); | 
|  |  | 
|  | if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) | 
|  | printk(KERN_DEBUG | 
|  | "%s: invalid AID value 0x%x; bits 15:14 not set\n", | 
|  | sdata->name, aid); | 
|  | aid &= ~(BIT(15) | BIT(14)); | 
|  |  | 
|  | ifmgd->broken_ap = false; | 
|  |  | 
|  | if (aid == 0 || aid > IEEE80211_MAX_AID) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: invalid AID value %d (out of range), turn off PS\n", | 
|  | sdata->name, aid); | 
|  | aid = 0; | 
|  | ifmgd->broken_ap = true; | 
|  | } | 
|  |  | 
|  | pos = mgmt->u.assoc_resp.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  |  | 
|  | if (!elems.supp_rates) { | 
|  | printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n", | 
|  | sdata->name); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ifmgd->aid = aid; | 
|  |  | 
|  | mutex_lock(&sdata->local->sta_mtx); | 
|  | /* | 
|  | * station info was already allocated and inserted before | 
|  | * the association and should be available to us | 
|  | */ | 
|  | sta = sta_info_get(sdata, cbss->bssid); | 
|  | if (WARN_ON(!sta)) { | 
|  | mutex_unlock(&sdata->local->sta_mtx); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->oper_channel->band]; | 
|  |  | 
|  | if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) | 
|  | ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, | 
|  | elems.ht_cap_elem, &sta->sta.ht_cap); | 
|  |  | 
|  | sta->supports_40mhz = | 
|  | sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  |  | 
|  | rate_control_rate_init(sta); | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) | 
|  | set_sta_flag(sta, WLAN_STA_MFP); | 
|  |  | 
|  | if (elems.wmm_param) | 
|  | set_sta_flag(sta, WLAN_STA_WME); | 
|  |  | 
|  | err = sta_info_move_state(sta, IEEE80211_STA_AUTH); | 
|  | if (!err) | 
|  | err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | 
|  | if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) | 
|  | err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); | 
|  | if (err) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: failed to move station %pM to desired state\n", | 
|  | sdata->name, sta->sta.addr); | 
|  | WARN_ON(__sta_info_destroy(sta)); | 
|  | mutex_unlock(&sdata->local->sta_mtx); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&sdata->local->sta_mtx); | 
|  |  | 
|  | /* | 
|  | * Always handle WMM once after association regardless | 
|  | * of the first value the AP uses. Setting -1 here has | 
|  | * that effect because the AP values is an unsigned | 
|  | * 4-bit value. | 
|  | */ | 
|  | ifmgd->wmm_last_param_set = -1; | 
|  |  | 
|  | if (elems.wmm_param) | 
|  | ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, | 
|  | elems.wmm_param_len); | 
|  | else | 
|  | ieee80211_set_wmm_default(sdata, false); | 
|  | changed |= BSS_CHANGED_QOS; | 
|  |  | 
|  | if (elems.ht_operation && elems.wmm_param && | 
|  | !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) | 
|  | changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, | 
|  | cbss->bssid, false); | 
|  |  | 
|  | /* set AID and assoc capability, | 
|  | * ieee80211_set_associated() will tell the driver */ | 
|  | bss_conf->aid = aid; | 
|  | bss_conf->assoc_capability = capab_info; | 
|  | ieee80211_set_associated(sdata, cbss, changed); | 
|  |  | 
|  | /* | 
|  | * If we're using 4-addr mode, let the AP know that we're | 
|  | * doing so, so that it can create the STA VLAN on its side | 
|  | */ | 
|  | if (ifmgd->use_4addr) | 
|  | ieee80211_send_4addr_nullfunc(local, sdata); | 
|  |  | 
|  | /* | 
|  | * Start timer to probe the connection to the AP now. | 
|  | * Also start the timer that will detect beacon loss. | 
|  | */ | 
|  | ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); | 
|  | ieee80211_sta_reset_beacon_monitor(sdata); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static enum rx_mgmt_action __must_check | 
|  | ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | struct cfg80211_bss **bss) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; | 
|  | u16 capab_info, status_code, aid; | 
|  | struct ieee802_11_elems elems; | 
|  | u8 *pos; | 
|  | bool reassoc; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | if (!assoc_data) | 
|  | return RX_MGMT_NONE; | 
|  | if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid)) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | /* | 
|  | * AssocResp and ReassocResp have identical structure, so process both | 
|  | * of them in this function. | 
|  | */ | 
|  |  | 
|  | if (len < 24 + 6) | 
|  | return RX_MGMT_NONE; | 
|  |  | 
|  | reassoc = ieee80211_is_reassoc_req(mgmt->frame_control); | 
|  | capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); | 
|  | status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); | 
|  | aid = le16_to_cpu(mgmt->u.assoc_resp.aid); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x " | 
|  | "status=%d aid=%d)\n", | 
|  | sdata->name, reassoc ? "Rea" : "A", mgmt->sa, | 
|  | capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); | 
|  |  | 
|  | pos = mgmt->u.assoc_resp.variable; | 
|  | ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | 
|  |  | 
|  | if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && | 
|  | elems.timeout_int && elems.timeout_int_len == 5 && | 
|  | elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) { | 
|  | u32 tu, ms; | 
|  | tu = get_unaligned_le32(elems.timeout_int + 1); | 
|  | ms = tu * 1024 / 1000; | 
|  | printk(KERN_DEBUG "%s: %pM rejected association temporarily; " | 
|  | "comeback duration %u TU (%u ms)\n", | 
|  | sdata->name, mgmt->sa, tu, ms); | 
|  | assoc_data->timeout = jiffies + msecs_to_jiffies(ms); | 
|  | if (ms > IEEE80211_ASSOC_TIMEOUT) | 
|  | run_again(ifmgd, assoc_data->timeout); | 
|  | return RX_MGMT_NONE; | 
|  | } | 
|  |  | 
|  | *bss = assoc_data->bss; | 
|  |  | 
|  | if (status_code != WLAN_STATUS_SUCCESS) { | 
|  | printk(KERN_DEBUG "%s: %pM denied association (code=%d)\n", | 
|  | sdata->name, mgmt->sa, status_code); | 
|  | ieee80211_destroy_assoc_data(sdata, false); | 
|  | } else { | 
|  | printk(KERN_DEBUG "%s: associated\n", sdata->name); | 
|  |  | 
|  | if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) { | 
|  | /* oops -- internal error -- send timeout for now */ | 
|  | ieee80211_destroy_assoc_data(sdata, true); | 
|  | sta_info_destroy_addr(sdata, mgmt->bssid); | 
|  | cfg80211_put_bss(*bss); | 
|  | return RX_MGMT_CFG80211_ASSOC_TIMEOUT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * destroy assoc_data afterwards, as otherwise an idle | 
|  | * recalc after assoc_data is NULL but before associated | 
|  | * is set can cause the interface to go idle | 
|  | */ | 
|  | ieee80211_destroy_assoc_data(sdata, true); | 
|  | } | 
|  |  | 
|  | return RX_MGMT_CFG80211_RX_ASSOC; | 
|  | } | 
|  | static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status, | 
|  | struct ieee802_11_elems *elems, | 
|  | bool beacon) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int freq; | 
|  | struct ieee80211_bss *bss; | 
|  | struct ieee80211_channel *channel; | 
|  | bool need_ps = false; | 
|  |  | 
|  | if (sdata->u.mgd.associated && | 
|  | ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) { | 
|  | bss = (void *)sdata->u.mgd.associated->priv; | 
|  | /* not previously set so we may need to recalc */ | 
|  | need_ps = !bss->dtim_period; | 
|  | } | 
|  |  | 
|  | if (elems->ds_params && elems->ds_params_len == 1) | 
|  | freq = ieee80211_channel_to_frequency(elems->ds_params[0], | 
|  | rx_status->band); | 
|  | else | 
|  | freq = rx_status->freq; | 
|  |  | 
|  | channel = ieee80211_get_channel(local->hw.wiphy, freq); | 
|  |  | 
|  | if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, | 
|  | channel, beacon); | 
|  | if (bss) | 
|  | ieee80211_rx_bss_put(local, bss); | 
|  |  | 
|  | if (!sdata->u.mgd.associated) | 
|  | return; | 
|  |  | 
|  | if (need_ps) { | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) && | 
|  | (memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid, | 
|  | ETH_ALEN) == 0)) { | 
|  | struct ieee80211_channel_sw_ie *sw_elem = | 
|  | (struct ieee80211_channel_sw_ie *)elems->ch_switch_elem; | 
|  | ieee80211_sta_process_chanswitch(sdata, sw_elem, | 
|  | bss, rx_status->mactime); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_mgmt *mgmt = (void *)skb->data; | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  | struct ieee80211_rx_status *rx_status = (void *) skb->cb; | 
|  | size_t baselen, len = skb->len; | 
|  | struct ieee802_11_elems elems; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | ASSERT_MGD_MTX(ifmgd); | 
|  |  | 
|  | if (!ether_addr_equal(mgmt->da, sdata->vif.addr)) | 
|  | return; /* ignore ProbeResp to foreign address */ | 
|  |  | 
|  | baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, | 
|  | &elems); | 
|  |  | 
|  | ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); | 
|  |  | 
|  | if (ifmgd->associated && | 
|  | ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) | 
|  | ieee80211_reset_ap_probe(sdata); | 
|  |  | 
|  | if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies && | 
|  | ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) { | 
|  | /* got probe response, continue with auth */ | 
|  | printk(KERN_DEBUG "%s: direct probe responded\n", sdata->name); | 
|  | ifmgd->auth_data->tries = 0; | 
|  | ifmgd->auth_data->timeout = jiffies; | 
|  | run_again(ifmgd, ifmgd->auth_data->timeout); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the canonical list of information elements we care about, | 
|  | * the filter code also gives us all changes to the Microsoft OUI | 
|  | * (00:50:F2) vendor IE which is used for WMM which we need to track. | 
|  | * | 
|  | * We implement beacon filtering in software since that means we can | 
|  | * avoid processing the frame here and in cfg80211, and userspace | 
|  | * will not be able to tell whether the hardware supports it or not. | 
|  | * | 
|  | * XXX: This list needs to be dynamic -- userspace needs to be able to | 
|  | *	add items it requires. It also needs to be able to tell us to | 
|  | *	look out for other vendor IEs. | 
|  | */ | 
|  | static const u64 care_about_ies = | 
|  | (1ULL << WLAN_EID_COUNTRY) | | 
|  | (1ULL << WLAN_EID_ERP_INFO) | | 
|  | (1ULL << WLAN_EID_CHANNEL_SWITCH) | | 
|  | (1ULL << WLAN_EID_PWR_CONSTRAINT) | | 
|  | (1ULL << WLAN_EID_HT_CAPABILITY) | | 
|  | (1ULL << WLAN_EID_HT_OPERATION); | 
|  |  | 
|  | static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, | 
|  | struct ieee80211_mgmt *mgmt, | 
|  | size_t len, | 
|  | struct ieee80211_rx_status *rx_status) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; | 
|  | size_t baselen; | 
|  | struct ieee802_11_elems elems; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 changed = 0; | 
|  | bool erp_valid, directed_tim = false; | 
|  | u8 erp_value = 0; | 
|  | u32 ncrc; | 
|  | u8 *bssid; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | /* Process beacon from the current BSS */ | 
|  | baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; | 
|  | if (baselen > len) | 
|  | return; | 
|  |  | 
|  | if (rx_status->freq != local->hw.conf.channel->center_freq) | 
|  | return; | 
|  |  | 
|  | if (ifmgd->assoc_data && !ifmgd->assoc_data->have_beacon && | 
|  | ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { | 
|  | ieee802_11_parse_elems(mgmt->u.beacon.variable, | 
|  | len - baselen, &elems); | 
|  |  | 
|  | ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, | 
|  | false); | 
|  | ifmgd->assoc_data->have_beacon = true; | 
|  | ifmgd->assoc_data->sent_assoc = false; | 
|  | /* continue assoc process */ | 
|  | ifmgd->assoc_data->timeout = jiffies; | 
|  | run_again(ifmgd, ifmgd->assoc_data->timeout); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!ifmgd->associated || | 
|  | !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) | 
|  | return; | 
|  | bssid = ifmgd->associated->bssid; | 
|  |  | 
|  | /* Track average RSSI from the Beacon frames of the current AP */ | 
|  | ifmgd->last_beacon_signal = rx_status->signal; | 
|  | if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) { | 
|  | ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE; | 
|  | ifmgd->ave_beacon_signal = rx_status->signal * 16; | 
|  | ifmgd->last_cqm_event_signal = 0; | 
|  | ifmgd->count_beacon_signal = 1; | 
|  | ifmgd->last_ave_beacon_signal = 0; | 
|  | } else { | 
|  | ifmgd->ave_beacon_signal = | 
|  | (IEEE80211_SIGNAL_AVE_WEIGHT * rx_status->signal * 16 + | 
|  | (16 - IEEE80211_SIGNAL_AVE_WEIGHT) * | 
|  | ifmgd->ave_beacon_signal) / 16; | 
|  | ifmgd->count_beacon_signal++; | 
|  | } | 
|  |  | 
|  | if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && | 
|  | ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { | 
|  | int sig = ifmgd->ave_beacon_signal; | 
|  | int last_sig = ifmgd->last_ave_beacon_signal; | 
|  |  | 
|  | /* | 
|  | * if signal crosses either of the boundaries, invoke callback | 
|  | * with appropriate parameters | 
|  | */ | 
|  | if (sig > ifmgd->rssi_max_thold && | 
|  | (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { | 
|  | ifmgd->last_ave_beacon_signal = sig; | 
|  | drv_rssi_callback(local, RSSI_EVENT_HIGH); | 
|  | } else if (sig < ifmgd->rssi_min_thold && | 
|  | (last_sig >= ifmgd->rssi_max_thold || | 
|  | last_sig == 0)) { | 
|  | ifmgd->last_ave_beacon_signal = sig; | 
|  | drv_rssi_callback(local, RSSI_EVENT_LOW); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bss_conf->cqm_rssi_thold && | 
|  | ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && | 
|  | !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { | 
|  | int sig = ifmgd->ave_beacon_signal / 16; | 
|  | int last_event = ifmgd->last_cqm_event_signal; | 
|  | int thold = bss_conf->cqm_rssi_thold; | 
|  | int hyst = bss_conf->cqm_rssi_hyst; | 
|  | if (sig < thold && | 
|  | (last_event == 0 || sig < last_event - hyst)) { | 
|  | ifmgd->last_cqm_event_signal = sig; | 
|  | ieee80211_cqm_rssi_notify( | 
|  | &sdata->vif, | 
|  | NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, | 
|  | GFP_KERNEL); | 
|  | } else if (sig > thold && | 
|  | (last_event == 0 || sig > last_event + hyst)) { | 
|  | ifmgd->last_cqm_event_signal = sig; | 
|  | ieee80211_cqm_rssi_notify( | 
|  | &sdata->vif, | 
|  | NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, | 
|  | GFP_KERNEL); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n", | 
|  | sdata->name); | 
|  | #endif | 
|  | ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, -1); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Push the beacon loss detection into the future since | 
|  | * we are processing a beacon from the AP just now. | 
|  | */ | 
|  | ieee80211_sta_reset_beacon_monitor(sdata); | 
|  |  | 
|  | ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); | 
|  | ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, | 
|  | len - baselen, &elems, | 
|  | care_about_ies, ncrc); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) | 
|  | directed_tim = ieee80211_check_tim(elems.tim, elems.tim_len, | 
|  | ifmgd->aid); | 
|  |  | 
|  | if (ncrc != ifmgd->beacon_crc || !ifmgd->beacon_crc_valid) { | 
|  | ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, | 
|  | true); | 
|  |  | 
|  | ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, | 
|  | elems.wmm_param_len); | 
|  | } | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) { | 
|  | if (directed_tim) { | 
|  | if (local->hw.conf.dynamic_ps_timeout > 0) { | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_PS; | 
|  | ieee80211_hw_config(local, | 
|  | IEEE80211_CONF_CHANGE_PS); | 
|  | } | 
|  | ieee80211_send_nullfunc(local, sdata, 0); | 
|  | } else if (!local->pspolling && sdata->u.mgd.powersave) { | 
|  | local->pspolling = true; | 
|  |  | 
|  | /* | 
|  | * Here is assumed that the driver will be | 
|  | * able to send ps-poll frame and receive a | 
|  | * response even though power save mode is | 
|  | * enabled, but some drivers might require | 
|  | * to disable power save here. This needs | 
|  | * to be investigated. | 
|  | */ | 
|  | ieee80211_send_pspoll(local, sdata); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) | 
|  | return; | 
|  | ifmgd->beacon_crc = ncrc; | 
|  | ifmgd->beacon_crc_valid = true; | 
|  |  | 
|  | if (elems.erp_info && elems.erp_info_len >= 1) { | 
|  | erp_valid = true; | 
|  | erp_value = elems.erp_info[0]; | 
|  | } else { | 
|  | erp_valid = false; | 
|  | } | 
|  | changed |= ieee80211_handle_bss_capability(sdata, | 
|  | le16_to_cpu(mgmt->u.beacon.capab_info), | 
|  | erp_valid, erp_value); | 
|  |  | 
|  |  | 
|  | if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && | 
|  | !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) { | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  |  | 
|  | changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, | 
|  | bssid, true); | 
|  | } | 
|  |  | 
|  | /* Note: country IE parsing is done for us by cfg80211 */ | 
|  | if (elems.country_elem) { | 
|  | /* TODO: IBSS also needs this */ | 
|  | if (elems.pwr_constr_elem) | 
|  | ieee80211_handle_pwr_constr(sdata, | 
|  | le16_to_cpu(mgmt->u.probe_resp.capab_info), | 
|  | elems.pwr_constr_elem, | 
|  | elems.pwr_constr_elem_len); | 
|  | } | 
|  |  | 
|  | ieee80211_bss_info_change_notify(sdata, changed); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_rx_status *rx_status; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | struct cfg80211_bss *bss = NULL; | 
|  | enum rx_mgmt_action rma = RX_MGMT_NONE; | 
|  | u16 fc; | 
|  |  | 
|  | rx_status = (struct ieee80211_rx_status *) skb->cb; | 
|  | mgmt = (struct ieee80211_mgmt *) skb->data; | 
|  | fc = le16_to_cpu(mgmt->frame_control); | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | switch (fc & IEEE80211_FCTL_STYPE) { | 
|  | case IEEE80211_STYPE_BEACON: | 
|  | ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); | 
|  | break; | 
|  | case IEEE80211_STYPE_PROBE_RESP: | 
|  | ieee80211_rx_mgmt_probe_resp(sdata, skb); | 
|  | break; | 
|  | case IEEE80211_STYPE_AUTH: | 
|  | rma = ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_DEAUTH: | 
|  | rma = ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_DISASSOC: | 
|  | rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); | 
|  | break; | 
|  | case IEEE80211_STYPE_ASSOC_RESP: | 
|  | case IEEE80211_STYPE_REASSOC_RESP: | 
|  | rma = ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len, &bss); | 
|  | break; | 
|  | case IEEE80211_STYPE_ACTION: | 
|  | switch (mgmt->u.action.category) { | 
|  | case WLAN_CATEGORY_SPECTRUM_MGMT: | 
|  | ieee80211_sta_process_chanswitch(sdata, | 
|  | &mgmt->u.action.u.chan_switch.sw_elem, | 
|  | (void *)ifmgd->associated->priv, | 
|  | rx_status->mactime); | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | switch (rma) { | 
|  | case RX_MGMT_NONE: | 
|  | /* no action */ | 
|  | break; | 
|  | case RX_MGMT_CFG80211_DEAUTH: | 
|  | cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len); | 
|  | break; | 
|  | case RX_MGMT_CFG80211_DISASSOC: | 
|  | cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len); | 
|  | break; | 
|  | case RX_MGMT_CFG80211_RX_AUTH: | 
|  | cfg80211_send_rx_auth(sdata->dev, (u8 *)mgmt, skb->len); | 
|  | break; | 
|  | case RX_MGMT_CFG80211_RX_ASSOC: | 
|  | cfg80211_send_rx_assoc(sdata->dev, bss, (u8 *)mgmt, skb->len); | 
|  | break; | 
|  | case RX_MGMT_CFG80211_ASSOC_TIMEOUT: | 
|  | cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "unexpected: %d", rma); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (local->quiescing) { | 
|  | set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &sdata->work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, | 
|  | u8 *bssid, u8 reason) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u8 frame_buf[DEAUTH_DISASSOC_LEN]; | 
|  |  | 
|  | ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL | | 
|  | IEEE80211_STA_BEACON_POLL); | 
|  |  | 
|  | ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, | 
|  | false, frame_buf); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | /* | 
|  | * must be outside lock due to cfg80211, | 
|  | * but that's not a problem. | 
|  | */ | 
|  | cfg80211_send_deauth(sdata->dev, frame_buf, DEAUTH_DISASSOC_LEN); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | } | 
|  |  | 
|  | static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; | 
|  |  | 
|  | lockdep_assert_held(&ifmgd->mtx); | 
|  |  | 
|  | if (WARN_ON_ONCE(!auth_data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | auth_data->tries++; | 
|  |  | 
|  | if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: authentication with %pM timed out\n", | 
|  | sdata->name, auth_data->bss->bssid); | 
|  |  | 
|  | /* | 
|  | * Most likely AP is not in the range so remove the | 
|  | * bss struct for that AP. | 
|  | */ | 
|  | cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | if (auth_data->bss->proberesp_ies) { | 
|  | printk(KERN_DEBUG "%s: send auth to %pM (try %d/%d)\n", | 
|  | sdata->name, auth_data->bss->bssid, auth_data->tries, | 
|  | IEEE80211_AUTH_MAX_TRIES); | 
|  |  | 
|  | auth_data->expected_transaction = 2; | 
|  | ieee80211_send_auth(sdata, 1, auth_data->algorithm, | 
|  | auth_data->ie, auth_data->ie_len, | 
|  | auth_data->bss->bssid, | 
|  | auth_data->bss->bssid, NULL, 0, 0); | 
|  | } else { | 
|  | const u8 *ssidie; | 
|  |  | 
|  | printk(KERN_DEBUG "%s: direct probe to %pM (try %d/%i)\n", | 
|  | sdata->name, auth_data->bss->bssid, auth_data->tries, | 
|  | IEEE80211_AUTH_MAX_TRIES); | 
|  |  | 
|  | ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID); | 
|  | if (!ssidie) | 
|  | return -EINVAL; | 
|  | /* | 
|  | * Direct probe is sent to broadcast address as some APs | 
|  | * will not answer to direct packet in unassociated state. | 
|  | */ | 
|  | ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], | 
|  | NULL, 0, (u32) -1, true, false); | 
|  | } | 
|  |  | 
|  | auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; | 
|  | run_again(ifmgd, auth_data->timeout); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | lockdep_assert_held(&sdata->u.mgd.mtx); | 
|  |  | 
|  | assoc_data->tries++; | 
|  | if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { | 
|  | printk(KERN_DEBUG "%s: association with %pM timed out\n", | 
|  | sdata->name, assoc_data->bss->bssid); | 
|  |  | 
|  | /* | 
|  | * Most likely AP is not in the range so remove the | 
|  | * bss struct for that AP. | 
|  | */ | 
|  | cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: associate with %pM (try %d/%d)\n", | 
|  | sdata->name, assoc_data->bss->bssid, assoc_data->tries, | 
|  | IEEE80211_ASSOC_MAX_TRIES); | 
|  | ieee80211_send_assoc(sdata); | 
|  |  | 
|  | assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; | 
|  | run_again(&sdata->u.mgd, assoc_data->timeout); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | if (ifmgd->auth_data && | 
|  | time_after(jiffies, ifmgd->auth_data->timeout)) { | 
|  | if (ifmgd->auth_data->done) { | 
|  | /* | 
|  | * ok ... we waited for assoc but userspace didn't, | 
|  | * so let's just kill the auth data | 
|  | */ | 
|  | ieee80211_destroy_auth_data(sdata, false); | 
|  | } else if (ieee80211_probe_auth(sdata)) { | 
|  | u8 bssid[ETH_ALEN]; | 
|  |  | 
|  | memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); | 
|  |  | 
|  | ieee80211_destroy_auth_data(sdata, false); | 
|  |  | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | cfg80211_send_auth_timeout(sdata->dev, bssid); | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | } | 
|  | } else if (ifmgd->auth_data) | 
|  | run_again(ifmgd, ifmgd->auth_data->timeout); | 
|  |  | 
|  | if (ifmgd->assoc_data && | 
|  | time_after(jiffies, ifmgd->assoc_data->timeout)) { | 
|  | if (!ifmgd->assoc_data->have_beacon || | 
|  | ieee80211_do_assoc(sdata)) { | 
|  | u8 bssid[ETH_ALEN]; | 
|  |  | 
|  | memcpy(bssid, ifmgd->assoc_data->bss->bssid, ETH_ALEN); | 
|  |  | 
|  | ieee80211_destroy_assoc_data(sdata, false); | 
|  |  | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | cfg80211_send_assoc_timeout(sdata->dev, bssid); | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | } | 
|  | } else if (ifmgd->assoc_data) | 
|  | run_again(ifmgd, ifmgd->assoc_data->timeout); | 
|  |  | 
|  | if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | | 
|  | IEEE80211_STA_CONNECTION_POLL) && | 
|  | ifmgd->associated) { | 
|  | u8 bssid[ETH_ALEN]; | 
|  | int max_tries; | 
|  |  | 
|  | memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); | 
|  |  | 
|  | if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) | 
|  | max_tries = max_nullfunc_tries; | 
|  | else | 
|  | max_tries = max_probe_tries; | 
|  |  | 
|  | /* ACK received for nullfunc probing frame */ | 
|  | if (!ifmgd->probe_send_count) | 
|  | ieee80211_reset_ap_probe(sdata); | 
|  | else if (ifmgd->nullfunc_failed) { | 
|  | if (ifmgd->probe_send_count < max_tries) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "%s: No ack for nullfunc frame to" | 
|  | " AP %pM, try %d/%i\n", | 
|  | sdata->name, bssid, | 
|  | ifmgd->probe_send_count, max_tries); | 
|  | #endif | 
|  | ieee80211_mgd_probe_ap_send(sdata); | 
|  | } else { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "%s: No ack for nullfunc frame to" | 
|  | " AP %pM, disconnecting.\n", | 
|  | sdata->name, bssid); | 
|  | #endif | 
|  | ieee80211_sta_connection_lost(sdata, bssid, | 
|  | WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); | 
|  | } | 
|  | } else if (time_is_after_jiffies(ifmgd->probe_timeout)) | 
|  | run_again(ifmgd, ifmgd->probe_timeout); | 
|  | else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "%s: Failed to send nullfunc to AP %pM" | 
|  | " after %dms, disconnecting.\n", | 
|  | sdata->name, | 
|  | bssid, probe_wait_ms); | 
|  | #endif | 
|  | ieee80211_sta_connection_lost(sdata, bssid, | 
|  | WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); | 
|  | } else if (ifmgd->probe_send_count < max_tries) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "%s: No probe response from AP %pM" | 
|  | " after %dms, try %d/%i\n", | 
|  | sdata->name, | 
|  | bssid, probe_wait_ms, | 
|  | ifmgd->probe_send_count, max_tries); | 
|  | #endif | 
|  | ieee80211_mgd_probe_ap_send(sdata); | 
|  | } else { | 
|  | /* | 
|  | * We actually lost the connection ... or did we? | 
|  | * Let's make sure! | 
|  | */ | 
|  | wiphy_debug(local->hw.wiphy, | 
|  | "%s: No probe response from AP %pM" | 
|  | " after %dms, disconnecting.\n", | 
|  | sdata->name, | 
|  | bssid, probe_wait_ms); | 
|  |  | 
|  | ieee80211_sta_connection_lost(sdata, bssid, | 
|  | WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_bcn_mon_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (local->quiescing) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_work(&sdata->local->hw, | 
|  | &sdata->u.mgd.beacon_connection_loss_work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_conn_mon_timer(unsigned long data) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | (struct ieee80211_sub_if_data *) data; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  |  | 
|  | if (local->quiescing) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_work(&local->hw, &ifmgd->monitor_work); | 
|  | } | 
|  |  | 
|  | static void ieee80211_sta_monitor_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, | 
|  | u.mgd.monitor_work); | 
|  |  | 
|  | ieee80211_mgd_probe_ap(sdata, false); | 
|  | } | 
|  |  | 
|  | static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | u32 flags; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION) { | 
|  | sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL | | 
|  | IEEE80211_STA_CONNECTION_POLL); | 
|  |  | 
|  | /* let's probe the connection once */ | 
|  | flags = sdata->local->hw.flags; | 
|  | if (!(flags & IEEE80211_HW_CONNECTION_MONITOR)) | 
|  | ieee80211_queue_work(&sdata->local->hw, | 
|  | &sdata->u.mgd.monitor_work); | 
|  | /* and do all the other regular work too */ | 
|  | ieee80211_queue_work(&sdata->local->hw, &sdata->work); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | /* | 
|  | * we need to use atomic bitops for the running bits | 
|  | * only because both timers might fire at the same | 
|  | * time -- the code here is properly synchronised. | 
|  | */ | 
|  |  | 
|  | cancel_work_sync(&ifmgd->request_smps_work); | 
|  |  | 
|  | cancel_work_sync(&ifmgd->monitor_work); | 
|  | cancel_work_sync(&ifmgd->beacon_connection_loss_work); | 
|  | if (del_timer_sync(&ifmgd->timer)) | 
|  | set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running); | 
|  |  | 
|  | cancel_work_sync(&ifmgd->chswitch_work); | 
|  | if (del_timer_sync(&ifmgd->chswitch_timer)) | 
|  | set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); | 
|  |  | 
|  | /* these will just be re-established on connection */ | 
|  | del_timer_sync(&ifmgd->conn_mon_timer); | 
|  | del_timer_sync(&ifmgd->bcn_mon_timer); | 
|  | } | 
|  |  | 
|  | void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | if (!ifmgd->associated) | 
|  | return; | 
|  |  | 
|  | if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { | 
|  | sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | if (ifmgd->associated) { | 
|  | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
|  | wiphy_debug(sdata->local->hw.wiphy, | 
|  | "%s: driver requested disconnect after resume.\n", | 
|  | sdata->name); | 
|  | #endif | 
|  | ieee80211_sta_connection_lost(sdata, | 
|  | ifmgd->associated->bssid, | 
|  | WLAN_REASON_UNSPECIFIED); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | return; | 
|  | } | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | } | 
|  |  | 
|  | if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running)) | 
|  | add_timer(&ifmgd->timer); | 
|  | if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running)) | 
|  | add_timer(&ifmgd->chswitch_timer); | 
|  | ieee80211_sta_reset_beacon_monitor(sdata); | 
|  | ieee80211_restart_sta_timer(sdata); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* interface setup */ | 
|  | void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd; | 
|  |  | 
|  | ifmgd = &sdata->u.mgd; | 
|  | INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); | 
|  | INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); | 
|  | INIT_WORK(&ifmgd->beacon_connection_loss_work, | 
|  | ieee80211_beacon_connection_loss_work); | 
|  | INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_work); | 
|  | setup_timer(&ifmgd->timer, ieee80211_sta_timer, | 
|  | (unsigned long) sdata); | 
|  | setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, | 
|  | (unsigned long) sdata); | 
|  | setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, | 
|  | (unsigned long) sdata); | 
|  | setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, | 
|  | (unsigned long) sdata); | 
|  |  | 
|  | ifmgd->flags = 0; | 
|  | ifmgd->powersave = sdata->wdev.ps; | 
|  | ifmgd->uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; | 
|  | ifmgd->uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; | 
|  |  | 
|  | mutex_init(&ifmgd->mtx); | 
|  |  | 
|  | if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) | 
|  | ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC; | 
|  | else | 
|  | ifmgd->req_smps = IEEE80211_SMPS_OFF; | 
|  | } | 
|  |  | 
|  | /* scan finished notification */ | 
|  | void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = local->scan_sdata; | 
|  |  | 
|  | /* Restart STA timers */ | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(sdata, &local->interfaces, list) | 
|  | ieee80211_restart_sta_timer(sdata); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | int ieee80211_max_network_latency(struct notifier_block *nb, | 
|  | unsigned long data, void *dummy) | 
|  | { | 
|  | s32 latency_usec = (s32) data; | 
|  | struct ieee80211_local *local = | 
|  | container_of(nb, struct ieee80211_local, | 
|  | network_latency_notifier); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | ieee80211_recalc_ps(local, latency_usec); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_bss *cbss, bool assoc) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_bss *bss = (void *)cbss->priv; | 
|  | struct sta_info *sta; | 
|  | bool have_sta = false; | 
|  | int err; | 
|  | int ht_cfreq; | 
|  | enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; | 
|  | const u8 *ht_oper_ie; | 
|  | const struct ieee80211_ht_operation *ht_oper = NULL; | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (assoc) { | 
|  | rcu_read_lock(); | 
|  | have_sta = sta_info_get(sdata, cbss->bssid); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | if (!have_sta) { | 
|  | sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); | 
|  | if (!sta) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_recalc_idle(sdata->local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | /* switch to the right channel */ | 
|  | sband = local->hw.wiphy->bands[cbss->channel->band]; | 
|  |  | 
|  | ifmgd->flags &= ~IEEE80211_STA_DISABLE_40MHZ; | 
|  |  | 
|  | if (sband->ht_cap.ht_supported) { | 
|  | ht_oper_ie = cfg80211_find_ie(WLAN_EID_HT_OPERATION, | 
|  | cbss->information_elements, | 
|  | cbss->len_information_elements); | 
|  | if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) | 
|  | ht_oper = (void *)(ht_oper_ie + 2); | 
|  | } | 
|  |  | 
|  | if (ht_oper) { | 
|  | ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, | 
|  | cbss->channel->band); | 
|  | /* check that channel matches the right operating channel */ | 
|  | if (cbss->channel->center_freq != ht_cfreq) { | 
|  | /* | 
|  | * It's possible that some APs are confused here; | 
|  | * Netgear WNDR3700 sometimes reports 4 higher than | 
|  | * the actual channel in association responses, but | 
|  | * since we look at probe response/beacon data here | 
|  | * it should be OK. | 
|  | */ | 
|  | printk(KERN_DEBUG | 
|  | "%s: Wrong control channel: center-freq: %d" | 
|  | " ht-cfreq: %d ht->primary_chan: %d" | 
|  | " band: %d. Disabling HT.\n", | 
|  | sdata->name, cbss->channel->center_freq, | 
|  | ht_cfreq, ht_oper->primary_chan, | 
|  | cbss->channel->band); | 
|  | ht_oper = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ht_oper) { | 
|  | channel_type = NL80211_CHAN_HT20; | 
|  |  | 
|  | if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { | 
|  | switch (ht_oper->ht_param & | 
|  | IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | channel_type = NL80211_CHAN_HT40PLUS; | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | channel_type = NL80211_CHAN_HT40MINUS; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!ieee80211_set_channel_type(local, sdata, channel_type)) { | 
|  | /* can only fail due to HT40+/- mismatch */ | 
|  | channel_type = NL80211_CHAN_HT20; | 
|  | printk(KERN_DEBUG | 
|  | "%s: disabling 40 MHz due to multi-vif mismatch\n", | 
|  | sdata->name); | 
|  | ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; | 
|  | WARN_ON(!ieee80211_set_channel_type(local, sdata, | 
|  | channel_type)); | 
|  | } | 
|  |  | 
|  | local->oper_channel = cbss->channel; | 
|  | ieee80211_hw_config(local, 0); | 
|  |  | 
|  | if (!have_sta) { | 
|  | u32 rates = 0, basic_rates = 0; | 
|  | bool have_higher_than_11mbit; | 
|  | int min_rate = INT_MAX, min_rate_index = -1; | 
|  |  | 
|  | ieee80211_get_rates(sband, bss->supp_rates, | 
|  | bss->supp_rates_len, | 
|  | &rates, &basic_rates, | 
|  | &have_higher_than_11mbit, | 
|  | &min_rate, &min_rate_index); | 
|  |  | 
|  | /* | 
|  | * This used to be a workaround for basic rates missing | 
|  | * in the association response frame. Now that we no | 
|  | * longer use the basic rates from there, it probably | 
|  | * doesn't happen any more, but keep the workaround so | 
|  | * in case some *other* APs are buggy in different ways | 
|  | * we can connect -- with a warning. | 
|  | */ | 
|  | if (!basic_rates && min_rate_index >= 0) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: No basic rates, using min rate instead.\n", | 
|  | sdata->name); | 
|  | basic_rates = BIT(min_rate_index); | 
|  | } | 
|  |  | 
|  | sta->sta.supp_rates[cbss->channel->band] = rates; | 
|  | sdata->vif.bss_conf.basic_rates = basic_rates; | 
|  |  | 
|  | /* cf. IEEE 802.11 9.2.12 */ | 
|  | if (local->oper_channel->band == IEEE80211_BAND_2GHZ && | 
|  | have_higher_than_11mbit) | 
|  | sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; | 
|  | else | 
|  | sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; | 
|  |  | 
|  | memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN); | 
|  |  | 
|  | /* tell driver about BSSID and basic rates */ | 
|  | ieee80211_bss_info_change_notify(sdata, | 
|  | BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES); | 
|  |  | 
|  | if (assoc) | 
|  | sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); | 
|  |  | 
|  | err = sta_info_insert(sta); | 
|  | sta = NULL; | 
|  | if (err) { | 
|  | printk(KERN_DEBUG | 
|  | "%s: failed to insert STA entry for the AP (error %d)\n", | 
|  | sdata->name, err); | 
|  | return err; | 
|  | } | 
|  | } else | 
|  | WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* config hooks */ | 
|  | int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_auth_request *req) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_mgd_auth_data *auth_data; | 
|  | u16 auth_alg; | 
|  | int err; | 
|  |  | 
|  | /* prepare auth data structure */ | 
|  |  | 
|  | switch (req->auth_type) { | 
|  | case NL80211_AUTHTYPE_OPEN_SYSTEM: | 
|  | auth_alg = WLAN_AUTH_OPEN; | 
|  | break; | 
|  | case NL80211_AUTHTYPE_SHARED_KEY: | 
|  | if (IS_ERR(local->wep_tx_tfm)) | 
|  | return -EOPNOTSUPP; | 
|  | auth_alg = WLAN_AUTH_SHARED_KEY; | 
|  | break; | 
|  | case NL80211_AUTHTYPE_FT: | 
|  | auth_alg = WLAN_AUTH_FT; | 
|  | break; | 
|  | case NL80211_AUTHTYPE_NETWORK_EAP: | 
|  | auth_alg = WLAN_AUTH_LEAP; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | auth_data = kzalloc(sizeof(*auth_data) + req->ie_len, GFP_KERNEL); | 
|  | if (!auth_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | auth_data->bss = req->bss; | 
|  |  | 
|  | if (req->ie && req->ie_len) { | 
|  | memcpy(auth_data->ie, req->ie, req->ie_len); | 
|  | auth_data->ie_len = req->ie_len; | 
|  | } | 
|  |  | 
|  | if (req->key && req->key_len) { | 
|  | auth_data->key_len = req->key_len; | 
|  | auth_data->key_idx = req->key_idx; | 
|  | memcpy(auth_data->key, req->key, req->key_len); | 
|  | } | 
|  |  | 
|  | auth_data->algorithm = auth_alg; | 
|  |  | 
|  | /* try to authenticate/probe */ | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | if ((ifmgd->auth_data && !ifmgd->auth_data->done) || | 
|  | ifmgd->assoc_data) { | 
|  | err = -EBUSY; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (ifmgd->auth_data) | 
|  | ieee80211_destroy_auth_data(sdata, false); | 
|  |  | 
|  | /* prep auth_data so we don't go into idle on disassoc */ | 
|  | ifmgd->auth_data = auth_data; | 
|  |  | 
|  | if (ifmgd->associated) | 
|  | ieee80211_set_disassoc(sdata, 0, 0, false, NULL); | 
|  |  | 
|  | printk(KERN_DEBUG "%s: authenticate with %pM\n", | 
|  | sdata->name, req->bss->bssid); | 
|  |  | 
|  | err = ieee80211_prep_connection(sdata, req->bss, false); | 
|  | if (err) | 
|  | goto err_clear; | 
|  |  | 
|  | err = ieee80211_probe_auth(sdata); | 
|  | if (err) { | 
|  | sta_info_destroy_addr(sdata, req->bss->bssid); | 
|  | goto err_clear; | 
|  | } | 
|  |  | 
|  | /* hold our own reference */ | 
|  | cfg80211_ref_bss(auth_data->bss); | 
|  | err = 0; | 
|  | goto out_unlock; | 
|  |  | 
|  | err_clear: | 
|  | ifmgd->auth_data = NULL; | 
|  | err_free: | 
|  | kfree(auth_data); | 
|  | out_unlock: | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_assoc_request *req) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | struct ieee80211_bss *bss = (void *)req->bss->priv; | 
|  | struct ieee80211_mgd_assoc_data *assoc_data; | 
|  | struct ieee80211_supported_band *sband; | 
|  | const u8 *ssidie; | 
|  | int i, err; | 
|  |  | 
|  | ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID); | 
|  | if (!ssidie) | 
|  | return -EINVAL; | 
|  |  | 
|  | assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); | 
|  | if (!assoc_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | if (ifmgd->associated) | 
|  | ieee80211_set_disassoc(sdata, 0, 0, false, NULL); | 
|  |  | 
|  | if (ifmgd->auth_data && !ifmgd->auth_data->done) { | 
|  | err = -EBUSY; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (ifmgd->assoc_data) { | 
|  | err = -EBUSY; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (ifmgd->auth_data) { | 
|  | bool match; | 
|  |  | 
|  | /* keep sta info, bssid if matching */ | 
|  | match = ether_addr_equal(ifmgd->bssid, req->bss->bssid); | 
|  | ieee80211_destroy_auth_data(sdata, match); | 
|  | } | 
|  |  | 
|  | /* prepare assoc data */ | 
|  |  | 
|  | ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N; | 
|  | ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; | 
|  |  | 
|  | ifmgd->beacon_crc_valid = false; | 
|  |  | 
|  | /* | 
|  | * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. | 
|  | * We still associate in non-HT mode (11a/b/g) if any one of these | 
|  | * ciphers is configured as pairwise. | 
|  | * We can set this to true for non-11n hardware, that'll be checked | 
|  | * separately along with the peer capabilities. | 
|  | */ | 
|  | for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) | 
|  | if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || | 
|  | req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || | 
|  | req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) | 
|  | ifmgd->flags |= IEEE80211_STA_DISABLE_11N; | 
|  |  | 
|  | if (req->flags & ASSOC_REQ_DISABLE_HT) | 
|  | ifmgd->flags |= IEEE80211_STA_DISABLE_11N; | 
|  |  | 
|  | /* Also disable HT if we don't support it or the AP doesn't use WMM */ | 
|  | sband = local->hw.wiphy->bands[req->bss->channel->band]; | 
|  | if (!sband->ht_cap.ht_supported || | 
|  | local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used) | 
|  | ifmgd->flags |= IEEE80211_STA_DISABLE_11N; | 
|  |  | 
|  | memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); | 
|  | memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, | 
|  | sizeof(ifmgd->ht_capa_mask)); | 
|  |  | 
|  | if (req->ie && req->ie_len) { | 
|  | memcpy(assoc_data->ie, req->ie, req->ie_len); | 
|  | assoc_data->ie_len = req->ie_len; | 
|  | } | 
|  |  | 
|  | assoc_data->bss = req->bss; | 
|  |  | 
|  | if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) { | 
|  | if (ifmgd->powersave) | 
|  | ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC; | 
|  | else | 
|  | ifmgd->ap_smps = IEEE80211_SMPS_OFF; | 
|  | } else | 
|  | ifmgd->ap_smps = ifmgd->req_smps; | 
|  |  | 
|  | assoc_data->capability = req->bss->capability; | 
|  | assoc_data->wmm = bss->wmm_used && | 
|  | (local->hw.queues >= IEEE80211_NUM_ACS); | 
|  | assoc_data->supp_rates = bss->supp_rates; | 
|  | assoc_data->supp_rates_len = bss->supp_rates_len; | 
|  | assoc_data->ht_operation_ie = | 
|  | ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION); | 
|  |  | 
|  | if (bss->wmm_used && bss->uapsd_supported && | 
|  | (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) { | 
|  | assoc_data->uapsd = true; | 
|  | ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; | 
|  | } else { | 
|  | assoc_data->uapsd = false; | 
|  | ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; | 
|  | } | 
|  |  | 
|  | memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]); | 
|  | assoc_data->ssid_len = ssidie[1]; | 
|  |  | 
|  | if (req->prev_bssid) | 
|  | memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN); | 
|  |  | 
|  | if (req->use_mfp) { | 
|  | ifmgd->mfp = IEEE80211_MFP_REQUIRED; | 
|  | ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; | 
|  | } else { | 
|  | ifmgd->mfp = IEEE80211_MFP_DISABLED; | 
|  | ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; | 
|  | } | 
|  |  | 
|  | if (req->crypto.control_port) | 
|  | ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; | 
|  | else | 
|  | ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; | 
|  |  | 
|  | sdata->control_port_protocol = req->crypto.control_port_ethertype; | 
|  | sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; | 
|  |  | 
|  | /* kick off associate process */ | 
|  |  | 
|  | ifmgd->assoc_data = assoc_data; | 
|  |  | 
|  | err = ieee80211_prep_connection(sdata, req->bss, true); | 
|  | if (err) | 
|  | goto err_clear; | 
|  |  | 
|  | if (!bss->dtim_period && | 
|  | sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) { | 
|  | /* | 
|  | * Wait up to one beacon interval ... | 
|  | * should this be more if we miss one? | 
|  | */ | 
|  | printk(KERN_DEBUG "%s: waiting for beacon from %pM\n", | 
|  | sdata->name, ifmgd->bssid); | 
|  | assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); | 
|  | } else { | 
|  | assoc_data->have_beacon = true; | 
|  | assoc_data->sent_assoc = false; | 
|  | assoc_data->timeout = jiffies; | 
|  | } | 
|  | run_again(ifmgd, assoc_data->timeout); | 
|  |  | 
|  | if (bss->corrupt_data) { | 
|  | char *corrupt_type = "data"; | 
|  | if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { | 
|  | if (bss->corrupt_data & | 
|  | IEEE80211_BSS_CORRUPT_PROBE_RESP) | 
|  | corrupt_type = "beacon and probe response"; | 
|  | else | 
|  | corrupt_type = "beacon"; | 
|  | } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) | 
|  | corrupt_type = "probe response"; | 
|  | printk(KERN_DEBUG "%s: associating with AP with corrupt %s\n", | 
|  | sdata->name, corrupt_type); | 
|  | } | 
|  |  | 
|  | err = 0; | 
|  | goto out; | 
|  | err_clear: | 
|  | ifmgd->assoc_data = NULL; | 
|  | err_free: | 
|  | kfree(assoc_data); | 
|  | out: | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_deauth_request *req) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u8 frame_buf[DEAUTH_DISASSOC_LEN]; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | if (ifmgd->auth_data) { | 
|  | ieee80211_destroy_auth_data(sdata, false); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG | 
|  | "%s: deauthenticating from %pM by local choice (reason=%d)\n", | 
|  | sdata->name, req->bssid, req->reason_code); | 
|  |  | 
|  | if (ifmgd->associated && | 
|  | ether_addr_equal(ifmgd->associated->bssid, req->bssid)) | 
|  | ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, | 
|  | req->reason_code, true, frame_buf); | 
|  | else | 
|  | ieee80211_send_deauth_disassoc(sdata, req->bssid, | 
|  | IEEE80211_STYPE_DEAUTH, | 
|  | req->reason_code, true, | 
|  | frame_buf); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | __cfg80211_send_deauth(sdata->dev, frame_buf, DEAUTH_DISASSOC_LEN); | 
|  |  | 
|  | mutex_lock(&sdata->local->mtx); | 
|  | ieee80211_recalc_idle(sdata->local); | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, | 
|  | struct cfg80211_disassoc_request *req) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  | u8 bssid[ETH_ALEN]; | 
|  | u8 frame_buf[DEAUTH_DISASSOC_LEN]; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  |  | 
|  | /* | 
|  | * cfg80211 should catch this ... but it's racy since | 
|  | * we can receive a disassoc frame, process it, hand it | 
|  | * to cfg80211 while that's in a locked section already | 
|  | * trying to tell us that the user wants to disconnect. | 
|  | */ | 
|  | if (ifmgd->associated != req->bss) { | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | return -ENOLINK; | 
|  | } | 
|  |  | 
|  | printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n", | 
|  | sdata->name, req->bss->bssid, req->reason_code); | 
|  |  | 
|  | memcpy(bssid, req->bss->bssid, ETH_ALEN); | 
|  | ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, | 
|  | req->reason_code, !req->local_state_change, | 
|  | frame_buf); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  |  | 
|  | __cfg80211_send_disassoc(sdata->dev, frame_buf, DEAUTH_DISASSOC_LEN); | 
|  |  | 
|  | mutex_lock(&sdata->local->mtx); | 
|  | ieee80211_recalc_idle(sdata->local); | 
|  | mutex_unlock(&sdata->local->mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
|  |  | 
|  | mutex_lock(&ifmgd->mtx); | 
|  | if (ifmgd->assoc_data) | 
|  | ieee80211_destroy_assoc_data(sdata, false); | 
|  | if (ifmgd->auth_data) | 
|  | ieee80211_destroy_auth_data(sdata, false); | 
|  | del_timer_sync(&ifmgd->timer); | 
|  | mutex_unlock(&ifmgd->mtx); | 
|  | } | 
|  |  | 
|  | void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, | 
|  | enum nl80211_cqm_rssi_threshold_event rssi_event, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  |  | 
|  | trace_api_cqm_rssi_notify(sdata, rssi_event); | 
|  |  | 
|  | cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); | 
|  |  | 
|  | unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
|  | return sdata->dev->operstate; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_operstate); |