| // SPDX-License-Identifier: GPL-2.0 |
| /***************************************************************************/ |
| |
| /* |
| * m527x.c -- platform support for ColdFire 527x based boards |
| * |
| * Sub-architcture dependent initialization code for the Freescale |
| * 5270/5271 and 5274/5275 CPUs. |
| * |
| * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) |
| * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) |
| */ |
| |
| /***************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <asm/machdep.h> |
| #include <asm/coldfire.h> |
| #include <asm/mcfsim.h> |
| #include <asm/mcfuart.h> |
| #include <asm/mcfclk.h> |
| |
| /***************************************************************************/ |
| |
| DEFINE_CLK(pll, "pll.0", MCF_CLK); |
| DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); |
| DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK); |
| DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK); |
| DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK); |
| DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK); |
| DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); |
| DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); |
| DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK); |
| DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); |
| DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); |
| DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK); |
| DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK); |
| |
| struct clk *mcf_clks[] = { |
| &clk_pll, |
| &clk_sys, |
| &clk_mcfpit0, |
| &clk_mcfpit1, |
| &clk_mcfpit2, |
| &clk_mcfpit3, |
| &clk_mcfuart0, |
| &clk_mcfuart1, |
| &clk_mcfuart2, |
| &clk_mcfqspi0, |
| &clk_fec0, |
| &clk_fec1, |
| &clk_mcfi2c0, |
| NULL |
| }; |
| |
| /***************************************************************************/ |
| |
| static void __init m527x_qspi_init(void) |
| { |
| #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) |
| #if defined(CONFIG_M5271) |
| u16 par; |
| |
| /* setup QSPS pins for QSPI with gpio CS control */ |
| writeb(0x1f, MCFGPIO_PAR_QSPI); |
| /* and CS2 & CS3 as gpio */ |
| par = readw(MCFGPIO_PAR_TIMER); |
| par &= 0x3f3f; |
| writew(par, MCFGPIO_PAR_TIMER); |
| #elif defined(CONFIG_M5275) |
| /* setup QSPS pins for QSPI with gpio CS control */ |
| writew(0x003e, MCFGPIO_PAR_QSPI); |
| #endif |
| #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ |
| } |
| |
| /***************************************************************************/ |
| |
| static void __init m527x_i2c_init(void) |
| { |
| #if IS_ENABLED(CONFIG_I2C_IMX) |
| #if defined(CONFIG_M5271) |
| u8 par; |
| |
| /* setup Port FECI2C Pin Assignment Register for I2C */ |
| /* set PAR_SCL to SCL and PAR_SDA to SDA */ |
| par = readb(MCFGPIO_PAR_FECI2C); |
| par |= 0x0f; |
| writeb(par, MCFGPIO_PAR_FECI2C); |
| #elif defined(CONFIG_M5275) |
| u16 par; |
| |
| /* setup Port FECI2C Pin Assignment Register for I2C */ |
| /* set PAR_SCL to SCL and PAR_SDA to SDA */ |
| par = readw(MCFGPIO_PAR_FECI2C); |
| par |= 0x0f; |
| writew(par, MCFGPIO_PAR_FECI2C); |
| #endif |
| #endif /* IS_ENABLED(CONFIG_I2C_IMX) */ |
| } |
| |
| /***************************************************************************/ |
| |
| static void __init m527x_uarts_init(void) |
| { |
| u16 sepmask; |
| |
| /* |
| * External Pin Mask Setting & Enable External Pin for Interface |
| */ |
| sepmask = readw(MCFGPIO_PAR_UART); |
| sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK; |
| writew(sepmask, MCFGPIO_PAR_UART); |
| } |
| |
| /***************************************************************************/ |
| |
| static void __init m527x_fec_init(void) |
| { |
| u8 v; |
| |
| /* Set multi-function pins to ethernet mode for fec0 */ |
| #if defined(CONFIG_M5271) |
| v = readb(MCFGPIO_PAR_FECI2C); |
| writeb(v | 0xf0, MCFGPIO_PAR_FECI2C); |
| #else |
| u16 par; |
| |
| par = readw(MCFGPIO_PAR_FECI2C); |
| writew(par | 0xf00, MCFGPIO_PAR_FECI2C); |
| v = readb(MCFGPIO_PAR_FEC0HL); |
| writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL); |
| |
| /* Set multi-function pins to ethernet mode for fec1 */ |
| par = readw(MCFGPIO_PAR_FECI2C); |
| writew(par | 0xa0, MCFGPIO_PAR_FECI2C); |
| v = readb(MCFGPIO_PAR_FEC1HL); |
| writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL); |
| #endif |
| } |
| |
| /***************************************************************************/ |
| |
| void __init config_BSP(char *commandp, int size) |
| { |
| mach_sched_init = hw_timer_init; |
| m527x_uarts_init(); |
| m527x_fec_init(); |
| m527x_qspi_init(); |
| m527x_i2c_init(); |
| } |
| |
| /***************************************************************************/ |