| /* |
| * FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices |
| * |
| * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved. |
| * |
| * Includes this patch from the mailing list: |
| * fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters |
| * Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| /* |
| * This driver manages bridges on a Altera SOCFPGA between the ARM host |
| * processor system (HPS) and the embedded FPGA. |
| * |
| * This driver supports enabling and disabling of the configured ports, which |
| * allows for safe reprogramming of the FPGA, assuming that the new FPGA image |
| * uses the same port configuration. Bridges must be disabled before |
| * reprogramming the FPGA and re-enabled after the FPGA has been programmed. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/fpga/fpga-bridge.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| #include <linux/spinlock.h> |
| |
| #define ALT_L3_REMAP_OFST 0x0 |
| #define ALT_L3_REMAP_MPUZERO_MSK 0x00000001 |
| #define ALT_L3_REMAP_H2F_MSK 0x00000008 |
| #define ALT_L3_REMAP_LWH2F_MSK 0x00000010 |
| |
| #define HPS2FPGA_BRIDGE_NAME "hps2fpga" |
| #define LWHPS2FPGA_BRIDGE_NAME "lwhps2fpga" |
| #define FPGA2HPS_BRIDGE_NAME "fpga2hps" |
| |
| struct altera_hps2fpga_data { |
| const char *name; |
| struct reset_control *bridge_reset; |
| struct regmap *l3reg; |
| unsigned int remap_mask; |
| struct clk *clk; |
| }; |
| |
| static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge) |
| { |
| struct altera_hps2fpga_data *priv = bridge->priv; |
| |
| return reset_control_status(priv->bridge_reset); |
| } |
| |
| /* The L3 REMAP register is write only, so keep a cached value. */ |
| static unsigned int l3_remap_shadow; |
| static DEFINE_SPINLOCK(l3_remap_lock); |
| |
| static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv, |
| bool enable) |
| { |
| unsigned long flags; |
| int ret; |
| |
| /* bring bridge out of reset */ |
| if (enable) |
| ret = reset_control_deassert(priv->bridge_reset); |
| else |
| ret = reset_control_assert(priv->bridge_reset); |
| if (ret) |
| return ret; |
| |
| /* Allow bridge to be visible to L3 masters or not */ |
| if (priv->remap_mask) { |
| spin_lock_irqsave(&l3_remap_lock, flags); |
| l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK; |
| |
| if (enable) |
| l3_remap_shadow |= priv->remap_mask; |
| else |
| l3_remap_shadow &= ~priv->remap_mask; |
| |
| ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST, |
| l3_remap_shadow); |
| spin_unlock_irqrestore(&l3_remap_lock, flags); |
| } |
| |
| return ret; |
| } |
| |
| static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable) |
| { |
| return _alt_hps2fpga_enable_set(bridge->priv, enable); |
| } |
| |
| static const struct fpga_bridge_ops altera_hps2fpga_br_ops = { |
| .enable_set = alt_hps2fpga_enable_set, |
| .enable_show = alt_hps2fpga_enable_show, |
| }; |
| |
| static struct altera_hps2fpga_data hps2fpga_data = { |
| .name = HPS2FPGA_BRIDGE_NAME, |
| .remap_mask = ALT_L3_REMAP_H2F_MSK, |
| }; |
| |
| static struct altera_hps2fpga_data lwhps2fpga_data = { |
| .name = LWHPS2FPGA_BRIDGE_NAME, |
| .remap_mask = ALT_L3_REMAP_LWH2F_MSK, |
| }; |
| |
| static struct altera_hps2fpga_data fpga2hps_data = { |
| .name = FPGA2HPS_BRIDGE_NAME, |
| }; |
| |
| static const struct of_device_id altera_fpga_of_match[] = { |
| { .compatible = "altr,socfpga-hps2fpga-bridge", |
| .data = &hps2fpga_data }, |
| { .compatible = "altr,socfpga-lwhps2fpga-bridge", |
| .data = &lwhps2fpga_data }, |
| { .compatible = "altr,socfpga-fpga2hps-bridge", |
| .data = &fpga2hps_data }, |
| {}, |
| }; |
| |
| static int alt_fpga_bridge_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct altera_hps2fpga_data *priv; |
| const struct of_device_id *of_id; |
| u32 enable; |
| int ret; |
| |
| of_id = of_match_device(altera_fpga_of_match, dev); |
| if (!of_id) { |
| dev_err(dev, "failed to match device\n"); |
| return -ENODEV; |
| } |
| |
| priv = (struct altera_hps2fpga_data *)of_id->data; |
| |
| priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node, |
| 0); |
| if (IS_ERR(priv->bridge_reset)) { |
| dev_err(dev, "Could not get %s reset control\n", priv->name); |
| return PTR_ERR(priv->bridge_reset); |
| } |
| |
| if (priv->remap_mask) { |
| priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs"); |
| if (IS_ERR(priv->l3reg)) { |
| dev_err(dev, "regmap for altr,l3regs lookup failed\n"); |
| return PTR_ERR(priv->l3reg); |
| } |
| } |
| |
| priv->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(priv->clk)) { |
| dev_err(dev, "no clock specified\n"); |
| return PTR_ERR(priv->clk); |
| } |
| |
| ret = clk_prepare_enable(priv->clk); |
| if (ret) { |
| dev_err(dev, "could not enable clock\n"); |
| return -EBUSY; |
| } |
| |
| if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) { |
| if (enable > 1) { |
| dev_warn(dev, "invalid bridge-enable %u > 1\n", enable); |
| } else { |
| dev_info(dev, "%s bridge\n", |
| (enable ? "enabling" : "disabling")); |
| |
| ret = _alt_hps2fpga_enable_set(priv, enable); |
| if (ret) |
| goto err; |
| } |
| } |
| |
| ret = fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops, |
| priv); |
| err: |
| if (ret) |
| clk_disable_unprepare(priv->clk); |
| |
| return ret; |
| } |
| |
| static int alt_fpga_bridge_remove(struct platform_device *pdev) |
| { |
| struct fpga_bridge *bridge = platform_get_drvdata(pdev); |
| struct altera_hps2fpga_data *priv = bridge->priv; |
| |
| fpga_bridge_unregister(&pdev->dev); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| return 0; |
| } |
| |
| MODULE_DEVICE_TABLE(of, altera_fpga_of_match); |
| |
| static struct platform_driver alt_fpga_bridge_driver = { |
| .probe = alt_fpga_bridge_probe, |
| .remove = alt_fpga_bridge_remove, |
| .driver = { |
| .name = "altera_hps2fpga_bridge", |
| .of_match_table = of_match_ptr(altera_fpga_of_match), |
| }, |
| }; |
| |
| module_platform_driver(alt_fpga_bridge_driver); |
| |
| MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge"); |
| MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); |
| MODULE_LICENSE("GPL v2"); |