| * Samsung Exynos5433 CMU (Clock Management Units) |
| |
| The Exynos5433 clock controller generates and supplies clock to various |
| controllers within the Exynos5433 SoC. |
| |
| Required Properties: |
| |
| - compatible: should be one of the following. |
| - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP |
| which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS |
| domains and bus clocks. |
| - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF |
| which generates clocks for LLI (Low Latency Interface) IP. |
| - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF |
| which generates clocks for DRAM Memory Controller domain. |
| - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC |
| which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs. |
| - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS |
| which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs. |
| - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS |
| which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs. |
| - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D |
| which generates clocks for G2D/MDMA IPs. |
| - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP |
| which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs. |
| - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD |
| which generates clocks for Cortex-A5/BUS/AUDIO clocks. |
| - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1" |
| and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS |
| which generates global data buses clock and global peripheral buses clock. |
| - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D |
| which generates clocks for 3D Graphics Engine IP. |
| - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL |
| which generates clocks for GSCALER IPs. |
| - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO |
| which generates clocks for Cortex-A53 Quad-core processor. |
| - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS |
| which generates clocks for Cortex-A57 Quad-core processor, CoreSight and |
| L2 cache controller. |
| - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL |
| which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. |
| - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC |
| which generates clocks for MFC(Multi-Format Codec) IP. |
| - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC |
| which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. |
| - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP |
| which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. |
| - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0 |
| which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} |
| IPs. |
| - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 |
| which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. |
| |
| - reg: physical base address of the controller and length of memory mapped |
| region. |
| |
| - #clock-cells: should be 1. |
| |
| - clocks: list of the clock controller input clock identifiers, |
| from common clock bindings. Please refer the next section |
| to find the input clocks for a given controller. |
| |
| - clock-names: list of the clock controller input clock names, |
| as described in clock-bindings.txt. |
| |
| Input clocks for top clock controller: |
| - oscclk |
| - sclk_mphy_pll |
| - sclk_mfc_pll |
| - sclk_bus_pll |
| |
| Input clocks for cpif clock controller: |
| - oscclk |
| |
| Input clocks for mif clock controller: |
| - oscclk |
| - sclk_mphy_pll |
| |
| Input clocks for fsys clock controller: |
| - oscclk |
| - sclk_ufs_mphy |
| - aclk_fsys_200 |
| - sclk_pcie_100_fsys |
| - sclk_ufsunipro_fsys |
| - sclk_mmc2_fsys |
| - sclk_mmc1_fsys |
| - sclk_mmc0_fsys |
| - sclk_usbhost30_fsys |
| - sclk_usbdrd30_fsys |
| |
| Input clocks for g2d clock controller: |
| - oscclk |
| - aclk_g2d_266 |
| - aclk_g2d_400 |
| |
| Input clocks for disp clock controller: |
| - oscclk |
| - sclk_dsim1_disp |
| - sclk_dsim0_disp |
| - sclk_dsd_disp |
| - sclk_decon_tv_eclk_disp |
| - sclk_decon_vclk_disp |
| - sclk_decon_eclk_disp |
| - sclk_decon_tv_vclk_disp |
| - aclk_disp_333 |
| |
| Input clocks for audio clock controller: |
| - oscclk |
| - fout_aud_pll |
| |
| Input clocks for bus0 clock controller: |
| - aclk_bus0_400 |
| |
| Input clocks for bus1 clock controller: |
| - aclk_bus1_400 |
| |
| Input clocks for bus2 clock controller: |
| - oscclk |
| - aclk_bus2_400 |
| |
| Input clocks for g3d clock controller: |
| - oscclk |
| - aclk_g3d_400 |
| |
| Input clocks for gscl clock controller: |
| - oscclk |
| - aclk_gscl_111 |
| - aclk_gscl_333 |
| |
| Input clocks for apollo clock controller: |
| - oscclk |
| - sclk_bus_pll_apollo |
| |
| Input clocks for atlas clock controller: |
| - oscclk |
| - sclk_bus_pll_atlas |
| |
| Input clocks for mscl clock controller: |
| - oscclk |
| - sclk_jpeg_mscl |
| - aclk_mscl_400 |
| |
| Input clocks for mfc clock controller: |
| - oscclk |
| - aclk_mfc_400 |
| |
| Input clocks for hevc clock controller: |
| - oscclk |
| - aclk_hevc_400 |
| |
| Input clocks for isp clock controller: |
| - oscclk |
| - aclk_isp_dis_400 |
| - aclk_isp_400 |
| |
| Input clocks for cam0 clock controller: |
| - oscclk |
| - aclk_cam0_333 |
| - aclk_cam0_400 |
| - aclk_cam0_552 |
| |
| Input clocks for cam1 clock controller: |
| - oscclk |
| - sclk_isp_uart_cam1 |
| - sclk_isp_spi1_cam1 |
| - sclk_isp_spi0_cam1 |
| - aclk_cam1_333 |
| - aclk_cam1_400 |
| - aclk_cam1_552 |
| |
| Each clock is assigned an identifier and client nodes can use this identifier |
| to specify the clock which they consume. |
| |
| All available clocks are defined as preprocessor macros in |
| dt-bindings/clock/exynos5433.h header and can be used in device |
| tree sources. |
| |
| Example 1: Examples of 'oscclk' source clock node are listed below. |
| |
| xxti: xxti { |
| compatible = "fixed-clock"; |
| clock-output-names = "oscclk"; |
| #clock-cells = <0>; |
| }; |
| |
| Example 2: Examples of clock controller nodes are listed below. |
| |
| cmu_top: clock-controller@10030000 { |
| compatible = "samsung,exynos5433-cmu-top"; |
| reg = <0x10030000 0x0c04>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "sclk_mphy_pll", |
| "sclk_mfc_pll", |
| "sclk_bus_pll"; |
| clocks = <&xxti>, |
| <&cmu_cpif CLK_SCLK_MPHY_PLL>, |
| <&cmu_mif CLK_SCLK_MFC_PLL>, |
| <&cmu_mif CLK_SCLK_BUS_PLL>; |
| }; |
| |
| cmu_cpif: clock-controller@10fc0000 { |
| compatible = "samsung,exynos5433-cmu-cpif"; |
| reg = <0x10fc0000 0x0c04>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk"; |
| clocks = <&xxti>; |
| }; |
| |
| cmu_mif: clock-controller@105b0000 { |
| compatible = "samsung,exynos5433-cmu-mif"; |
| reg = <0x105b0000 0x100c>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "sclk_mphy_pll"; |
| clocks = <&xxti>, |
| <&cmu_cpif CLK_SCLK_MPHY_PLL>; |
| }; |
| |
| cmu_peric: clock-controller@14c80000 { |
| compatible = "samsung,exynos5433-cmu-peric"; |
| reg = <0x14c80000 0x0b08>; |
| #clock-cells = <1>; |
| }; |
| |
| cmu_peris: clock-controller@10040000 { |
| compatible = "samsung,exynos5433-cmu-peris"; |
| reg = <0x10040000 0x0b20>; |
| #clock-cells = <1>; |
| }; |
| |
| cmu_fsys: clock-controller@156e0000 { |
| compatible = "samsung,exynos5433-cmu-fsys"; |
| reg = <0x156e0000 0x0b04>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "sclk_ufs_mphy", |
| "aclk_fsys_200", |
| "sclk_pcie_100_fsys", |
| "sclk_ufsunipro_fsys", |
| "sclk_mmc2_fsys", |
| "sclk_mmc1_fsys", |
| "sclk_mmc0_fsys", |
| "sclk_usbhost30_fsys", |
| "sclk_usbdrd30_fsys"; |
| clocks = <&xxti>, |
| <&cmu_cpif CLK_SCLK_UFS_MPHY>, |
| <&cmu_top CLK_ACLK_FSYS_200>, |
| <&cmu_top CLK_SCLK_PCIE_100_FSYS>, |
| <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, |
| <&cmu_top CLK_SCLK_MMC2_FSYS>, |
| <&cmu_top CLK_SCLK_MMC1_FSYS>, |
| <&cmu_top CLK_SCLK_MMC0_FSYS>, |
| <&cmu_top CLK_SCLK_USBHOST30_FSYS>, |
| <&cmu_top CLK_SCLK_USBDRD30_FSYS>; |
| }; |
| |
| cmu_g2d: clock-controller@12460000 { |
| compatible = "samsung,exynos5433-cmu-g2d"; |
| reg = <0x12460000 0x0b08>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "aclk_g2d_266", |
| "aclk_g2d_400"; |
| clocks = <&xxti>, |
| <&cmu_top CLK_ACLK_G2D_266>, |
| <&cmu_top CLK_ACLK_G2D_400>; |
| }; |
| |
| cmu_disp: clock-controller@13b90000 { |
| compatible = "samsung,exynos5433-cmu-disp"; |
| reg = <0x13b90000 0x0c04>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "sclk_dsim1_disp", |
| "sclk_dsim0_disp", |
| "sclk_dsd_disp", |
| "sclk_decon_tv_eclk_disp", |
| "sclk_decon_vclk_disp", |
| "sclk_decon_eclk_disp", |
| "sclk_decon_tv_vclk_disp", |
| "aclk_disp_333"; |
| clocks = <&xxti>, |
| <&cmu_mif CLK_SCLK_DSIM1_DISP>, |
| <&cmu_mif CLK_SCLK_DSIM0_DISP>, |
| <&cmu_mif CLK_SCLK_DSD_DISP>, |
| <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, |
| <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, |
| <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, |
| <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, |
| <&cmu_mif CLK_ACLK_DISP_333>; |
| }; |
| |
| cmu_aud: clock-controller@114c0000 { |
| compatible = "samsung,exynos5433-cmu-aud"; |
| reg = <0x114c0000 0x0b04>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "fout_aud_pll"; |
| clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; |
| }; |
| |
| cmu_bus0: clock-controller@13600000 { |
| compatible = "samsung,exynos5433-cmu-bus0"; |
| reg = <0x13600000 0x0b04>; |
| #clock-cells = <1>; |
| |
| clock-names = "aclk_bus0_400"; |
| clocks = <&cmu_top CLK_ACLK_BUS0_400>; |
| }; |
| |
| cmu_bus1: clock-controller@14800000 { |
| compatible = "samsung,exynos5433-cmu-bus1"; |
| reg = <0x14800000 0x0b04>; |
| #clock-cells = <1>; |
| |
| clock-names = "aclk_bus1_400"; |
| clocks = <&cmu_top CLK_ACLK_BUS1_400>; |
| }; |
| |
| cmu_bus2: clock-controller@13400000 { |
| compatible = "samsung,exynos5433-cmu-bus2"; |
| reg = <0x13400000 0x0b04>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "aclk_bus2_400"; |
| clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; |
| }; |
| |
| cmu_g3d: clock-controller@14aa0000 { |
| compatible = "samsung,exynos5433-cmu-g3d"; |
| reg = <0x14aa0000 0x1000>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "aclk_g3d_400"; |
| clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; |
| }; |
| |
| cmu_gscl: clock-controller@13cf0000 { |
| compatible = "samsung,exynos5433-cmu-gscl"; |
| reg = <0x13cf0000 0x0b10>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "aclk_gscl_111", |
| "aclk_gscl_333"; |
| clocks = <&xxti>, |
| <&cmu_top CLK_ACLK_GSCL_111>, |
| <&cmu_top CLK_ACLK_GSCL_333>; |
| }; |
| |
| cmu_apollo: clock-controller@11900000 { |
| compatible = "samsung,exynos5433-cmu-apollo"; |
| reg = <0x11900000 0x1088>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "sclk_bus_pll_apollo"; |
| clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; |
| }; |
| |
| cmu_atlas: clock-controller@11800000 { |
| compatible = "samsung,exynos5433-cmu-atlas"; |
| reg = <0x11800000 0x1088>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "sclk_bus_pll_atlas"; |
| clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; |
| }; |
| |
| cmu_mscl: clock-controller@105d0000 { |
| compatible = "samsung,exynos5433-cmu-mscl"; |
| reg = <0x105d0000 0x0b10>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "sclk_jpeg_mscl", |
| "aclk_mscl_400"; |
| clocks = <&xxti>, |
| <&cmu_top CLK_SCLK_JPEG_MSCL>, |
| <&cmu_top CLK_ACLK_MSCL_400>; |
| }; |
| |
| cmu_mfc: clock-controller@15280000 { |
| compatible = "samsung,exynos5433-cmu-mfc"; |
| reg = <0x15280000 0x0b08>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "aclk_mfc_400"; |
| clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; |
| }; |
| |
| cmu_hevc: clock-controller@14f80000 { |
| compatible = "samsung,exynos5433-cmu-hevc"; |
| reg = <0x14f80000 0x0b08>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", "aclk_hevc_400"; |
| clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; |
| }; |
| |
| cmu_isp: clock-controller@146d0000 { |
| compatible = "samsung,exynos5433-cmu-isp"; |
| reg = <0x146d0000 0x0b0c>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "aclk_isp_dis_400", |
| "aclk_isp_400"; |
| clocks = <&xxti>, |
| <&cmu_top CLK_ACLK_ISP_DIS_400>, |
| <&cmu_top CLK_ACLK_ISP_400>; |
| }; |
| |
| cmu_cam0: clock-controller@120d0000 { |
| compatible = "samsung,exynos5433-cmu-cam0"; |
| reg = <0x120d0000 0x0b0c>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "aclk_cam0_333", |
| "aclk_cam0_400", |
| "aclk_cam0_552"; |
| clocks = <&xxti>, |
| <&cmu_top CLK_ACLK_CAM0_333>, |
| <&cmu_top CLK_ACLK_CAM0_400>, |
| <&cmu_top CLK_ACLK_CAM0_552>; |
| }; |
| |
| cmu_cam1: clock-controller@145d0000 { |
| compatible = "samsung,exynos5433-cmu-cam1"; |
| reg = <0x145d0000 0x0b08>; |
| #clock-cells = <1>; |
| |
| clock-names = "oscclk", |
| "sclk_isp_uart_cam1", |
| "sclk_isp_spi1_cam1", |
| "sclk_isp_spi0_cam1", |
| "aclk_cam1_333", |
| "aclk_cam1_400", |
| "aclk_cam1_552"; |
| clocks = <&xxti>, |
| <&cmu_top CLK_SCLK_ISP_UART_CAM1>, |
| <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, |
| <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, |
| <&cmu_top CLK_ACLK_CAM1_333>, |
| <&cmu_top CLK_ACLK_CAM1_400>, |
| <&cmu_top CLK_ACLK_CAM1_552>; |
| }; |
| |
| Example 3: UART controller node that consumes the clock generated by the clock |
| controller. |
| |
| serial_0: serial@14C10000 { |
| compatible = "samsung,exynos5433-uart"; |
| reg = <0x14C10000 0x100>; |
| interrupts = <0 421 0>; |
| clocks = <&cmu_peric CLK_PCLK_UART0>, |
| <&cmu_peric CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_bus>; |
| }; |
