| * Marvell SD8787 power sequence provider | |
| Required properties: | |
| - compatible: must be "mmc-pwrseq-sd8787". | |
| - powerdown-gpios: contains a power down GPIO specifier with the | |
| default active state | |
| - reset-gpios: contains a reset GPIO specifier with the default | |
| active state | |
| Example: | |
| wifi_pwrseq: wifi_pwrseq { | |
| compatible = "mmc-pwrseq-sd8787"; | |
| powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; | |
| reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; | |
| } |