| PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. |
| |
| Required properties: |
| - compatible: |
| - should be "ti,pbias-dra7" for DRA7 |
| - should be "ti,pbias-omap2" for OMAP2 |
| - should be "ti,pbias-omap3" for OMAP3 |
| - should be "ti,pbias-omap4" for OMAP4 |
| - should be "ti,pbias-omap5" for OMAP5 |
| - "ti,pbias-omap" is deprecated |
| - reg: pbias register offset from syscon base and size of pbias register. |
| - syscon : phandle of the system control module |
| - regulator-name : should be |
| pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs |
| pbias_sim_omap3 for OMAP3 SoCs |
| pbias_mmc_omap4 for OMAP4 SoCs |
| pbias_mmc_omap5 for OMAP5 and DRA7 SoC |
| |
| Optional properties: |
| - Any optional property defined in bindings/regulator/regulator.txt |
| |
| Example: |
| |
| pbias_regulator: pbias_regulator { |
| compatible = "ti,pbias-omap"; |
| reg = <0 0x4>; |
| syscon = <&omap5_padconf_global>; |
| pbias_mmc_reg: pbias_mmc_omap5 { |
| regulator-name = "pbias_mmc_omap5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
