| /* | |
| * entry_from_vm86.c - tests kernel entries from vm86 mode | |
| * Copyright (c) 2014-2015 Andrew Lutomirski | |
| * | |
| * This exercises a few paths that need to special-case vm86 mode. | |
| * | |
| * GPL v2. | |
| */ | |
| #define _GNU_SOURCE | |
| #include <assert.h> | |
| #include <stdlib.h> | |
| #include <sys/syscall.h> | |
| #include <sys/signal.h> | |
| #include <sys/ucontext.h> | |
| #include <unistd.h> | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <inttypes.h> | |
| #include <sys/mman.h> | |
| #include <err.h> | |
| #include <stddef.h> | |
| #include <stdbool.h> | |
| #include <errno.h> | |
| #include <sys/vm86.h> | |
| static unsigned long load_addr = 0x10000; | |
| static int nerrs = 0; | |
| static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), | |
| int flags) | |
| { | |
| struct sigaction sa; | |
| memset(&sa, 0, sizeof(sa)); | |
| sa.sa_sigaction = handler; | |
| sa.sa_flags = SA_SIGINFO | flags; | |
| sigemptyset(&sa.sa_mask); | |
| if (sigaction(sig, &sa, 0)) | |
| err(1, "sigaction"); | |
| } | |
| static void clearhandler(int sig) | |
| { | |
| struct sigaction sa; | |
| memset(&sa, 0, sizeof(sa)); | |
| sa.sa_handler = SIG_DFL; | |
| sigemptyset(&sa.sa_mask); | |
| if (sigaction(sig, &sa, 0)) | |
| err(1, "sigaction"); | |
| } | |
| static sig_atomic_t got_signal; | |
| static void sighandler(int sig, siginfo_t *info, void *ctx_void) | |
| { | |
| ucontext_t *ctx = (ucontext_t*)ctx_void; | |
| if (ctx->uc_mcontext.gregs[REG_EFL] & X86_EFLAGS_VM || | |
| (ctx->uc_mcontext.gregs[REG_CS] & 3) != 3) { | |
| printf("[FAIL]\tSignal frame should not reflect vm86 mode\n"); | |
| nerrs++; | |
| } | |
| const char *signame; | |
| if (sig == SIGSEGV) | |
| signame = "SIGSEGV"; | |
| else if (sig == SIGILL) | |
| signame = "SIGILL"; | |
| else | |
| signame = "unexpected signal"; | |
| printf("[INFO]\t%s: FLAGS = 0x%lx, CS = 0x%hx\n", signame, | |
| (unsigned long)ctx->uc_mcontext.gregs[REG_EFL], | |
| (unsigned short)ctx->uc_mcontext.gregs[REG_CS]); | |
| got_signal = 1; | |
| } | |
| asm ( | |
| ".pushsection .rodata\n\t" | |
| ".type vmcode_bound, @object\n\t" | |
| "vmcode:\n\t" | |
| "vmcode_bound:\n\t" | |
| ".code16\n\t" | |
| "bound %ax, (2048)\n\t" | |
| "int3\n\t" | |
| "vmcode_sysenter:\n\t" | |
| "sysenter\n\t" | |
| "vmcode_syscall:\n\t" | |
| "syscall\n\t" | |
| "vmcode_sti:\n\t" | |
| "sti\n\t" | |
| "vmcode_int3:\n\t" | |
| "int3\n\t" | |
| "vmcode_int80:\n\t" | |
| "int $0x80\n\t" | |
| ".size vmcode, . - vmcode\n\t" | |
| "end_vmcode:\n\t" | |
| ".code32\n\t" | |
| ".popsection" | |
| ); | |
| extern unsigned char vmcode[], end_vmcode[]; | |
| extern unsigned char vmcode_bound[], vmcode_sysenter[], vmcode_syscall[], | |
| vmcode_sti[], vmcode_int3[], vmcode_int80[]; | |
| /* Returns false if the test was skipped. */ | |
| static bool do_test(struct vm86plus_struct *v86, unsigned long eip, | |
| unsigned int rettype, unsigned int retarg, | |
| const char *text) | |
| { | |
| long ret; | |
| printf("[RUN]\t%s from vm86 mode\n", text); | |
| v86->regs.eip = eip; | |
| ret = vm86(VM86_ENTER, v86); | |
| if (ret == -1 && (errno == ENOSYS || errno == EPERM)) { | |
| printf("[SKIP]\tvm86 %s\n", | |
| errno == ENOSYS ? "not supported" : "not allowed"); | |
| return false; | |
| } | |
| if (VM86_TYPE(ret) == VM86_INTx) { | |
| char trapname[32]; | |
| int trapno = VM86_ARG(ret); | |
| if (trapno == 13) | |
| strcpy(trapname, "GP"); | |
| else if (trapno == 5) | |
| strcpy(trapname, "BR"); | |
| else if (trapno == 14) | |
| strcpy(trapname, "PF"); | |
| else | |
| sprintf(trapname, "%d", trapno); | |
| printf("[INFO]\tExited vm86 mode due to #%s\n", trapname); | |
| } else if (VM86_TYPE(ret) == VM86_UNKNOWN) { | |
| printf("[INFO]\tExited vm86 mode due to unhandled GP fault\n"); | |
| } else if (VM86_TYPE(ret) == VM86_TRAP) { | |
| printf("[INFO]\tExited vm86 mode due to a trap (arg=%ld)\n", | |
| VM86_ARG(ret)); | |
| } else if (VM86_TYPE(ret) == VM86_SIGNAL) { | |
| printf("[INFO]\tExited vm86 mode due to a signal\n"); | |
| } else if (VM86_TYPE(ret) == VM86_STI) { | |
| printf("[INFO]\tExited vm86 mode due to STI\n"); | |
| } else { | |
| printf("[INFO]\tExited vm86 mode due to type %ld, arg %ld\n", | |
| VM86_TYPE(ret), VM86_ARG(ret)); | |
| } | |
| if (rettype == -1 || | |
| (VM86_TYPE(ret) == rettype && VM86_ARG(ret) == retarg)) { | |
| printf("[OK]\tReturned correctly\n"); | |
| } else { | |
| printf("[FAIL]\tIncorrect return reason\n"); | |
| nerrs++; | |
| } | |
| return true; | |
| } | |
| int main(void) | |
| { | |
| struct vm86plus_struct v86; | |
| unsigned char *addr = mmap((void *)load_addr, 4096, | |
| PROT_READ | PROT_WRITE | PROT_EXEC, | |
| MAP_ANONYMOUS | MAP_PRIVATE, -1,0); | |
| if (addr != (unsigned char *)load_addr) | |
| err(1, "mmap"); | |
| memcpy(addr, vmcode, end_vmcode - vmcode); | |
| addr[2048] = 2; | |
| addr[2050] = 3; | |
| memset(&v86, 0, sizeof(v86)); | |
| v86.regs.cs = load_addr / 16; | |
| v86.regs.ss = load_addr / 16; | |
| v86.regs.ds = load_addr / 16; | |
| v86.regs.es = load_addr / 16; | |
| assert((v86.regs.cs & 3) == 0); /* Looks like RPL = 0 */ | |
| /* #BR -- should deliver SIG??? */ | |
| do_test(&v86, vmcode_bound - vmcode, VM86_INTx, 5, "#BR"); | |
| /* | |
| * SYSENTER -- should cause #GP or #UD depending on CPU. | |
| * Expected return type -1 means that we shouldn't validate | |
| * the vm86 return value. This will avoid problems on non-SEP | |
| * CPUs. | |
| */ | |
| sethandler(SIGILL, sighandler, 0); | |
| do_test(&v86, vmcode_sysenter - vmcode, -1, 0, "SYSENTER"); | |
| clearhandler(SIGILL); | |
| /* | |
| * SYSCALL would be a disaster in VM86 mode. Fortunately, | |
| * there is no kernel that both enables SYSCALL and sets | |
| * EFER.SCE, so it's #UD on all systems. But vm86 is | |
| * buggy (or has a "feature"), so the SIGILL will actually | |
| * be delivered. | |
| */ | |
| sethandler(SIGILL, sighandler, 0); | |
| do_test(&v86, vmcode_syscall - vmcode, VM86_SIGNAL, 0, "SYSCALL"); | |
| clearhandler(SIGILL); | |
| /* STI with VIP set */ | |
| v86.regs.eflags |= X86_EFLAGS_VIP; | |
| v86.regs.eflags &= ~X86_EFLAGS_IF; | |
| do_test(&v86, vmcode_sti - vmcode, VM86_STI, 0, "STI with VIP set"); | |
| /* INT3 -- should cause #BP */ | |
| do_test(&v86, vmcode_int3 - vmcode, VM86_TRAP, 3, "INT3"); | |
| /* INT80 -- should exit with "INTx 0x80" */ | |
| v86.regs.eax = (unsigned int)-1; | |
| do_test(&v86, vmcode_int80 - vmcode, VM86_INTx, 0x80, "int80"); | |
| /* Execute a null pointer */ | |
| v86.regs.cs = 0; | |
| v86.regs.ss = 0; | |
| sethandler(SIGSEGV, sighandler, 0); | |
| got_signal = 0; | |
| if (do_test(&v86, 0, VM86_SIGNAL, 0, "Execute null pointer") && | |
| !got_signal) { | |
| printf("[FAIL]\tDid not receive SIGSEGV\n"); | |
| nerrs++; | |
| } | |
| clearhandler(SIGSEGV); | |
| /* Make sure nothing explodes if we fork. */ | |
| if (fork() > 0) | |
| return 0; | |
| return (nerrs == 0 ? 0 : 1); | |
| } |