| /* | 
 |  * Driver for the enhanced rotary controller on pxa930 and pxa935 | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/input.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/io.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <mach/pxa930_rotary.h> | 
 |  | 
 | #define SBCR	(0x04) | 
 | #define ERCR	(0x0c) | 
 |  | 
 | #define SBCR_ERSB	(1 << 5) | 
 |  | 
 | struct pxa930_rotary { | 
 | 	struct input_dev	*input_dev; | 
 | 	void __iomem		*mmio_base; | 
 | 	int			last_ercr; | 
 |  | 
 | 	struct pxa930_rotary_platform_data *pdata; | 
 | }; | 
 |  | 
 | static void clear_sbcr(struct pxa930_rotary *r) | 
 | { | 
 | 	uint32_t sbcr = __raw_readl(r->mmio_base + SBCR); | 
 |  | 
 | 	__raw_writel(sbcr | SBCR_ERSB, r->mmio_base + SBCR); | 
 | 	__raw_writel(sbcr & ~SBCR_ERSB, r->mmio_base + SBCR); | 
 | } | 
 |  | 
 | static irqreturn_t rotary_irq(int irq, void *dev_id) | 
 | { | 
 | 	struct pxa930_rotary *r = dev_id; | 
 | 	struct pxa930_rotary_platform_data *pdata = r->pdata; | 
 | 	int ercr, delta, key; | 
 |  | 
 | 	ercr = __raw_readl(r->mmio_base + ERCR) & 0xf; | 
 | 	clear_sbcr(r); | 
 |  | 
 | 	delta = ercr - r->last_ercr; | 
 | 	if (delta == 0) | 
 | 		return IRQ_HANDLED; | 
 |  | 
 | 	r->last_ercr = ercr; | 
 |  | 
 | 	if (pdata->up_key && pdata->down_key) { | 
 | 		key = (delta > 0) ? pdata->up_key : pdata->down_key; | 
 | 		input_report_key(r->input_dev, key, 1); | 
 | 		input_sync(r->input_dev); | 
 | 		input_report_key(r->input_dev, key, 0); | 
 | 	} else | 
 | 		input_report_rel(r->input_dev, pdata->rel_code, delta); | 
 |  | 
 | 	input_sync(r->input_dev); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int pxa930_rotary_open(struct input_dev *dev) | 
 | { | 
 | 	struct pxa930_rotary *r = input_get_drvdata(dev); | 
 |  | 
 | 	clear_sbcr(r); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void pxa930_rotary_close(struct input_dev *dev) | 
 | { | 
 | 	struct pxa930_rotary *r = input_get_drvdata(dev); | 
 |  | 
 | 	clear_sbcr(r); | 
 | } | 
 |  | 
 | static int __devinit pxa930_rotary_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct pxa930_rotary_platform_data *pdata = pdev->dev.platform_data; | 
 | 	struct pxa930_rotary *r; | 
 | 	struct input_dev *input_dev; | 
 | 	struct resource *res; | 
 | 	int irq; | 
 | 	int err; | 
 |  | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (irq < 0) { | 
 | 		dev_err(&pdev->dev, "no irq for rotary controller\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		dev_err(&pdev->dev, "no I/O memory defined\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	if (!pdata) { | 
 | 		dev_err(&pdev->dev, "no platform data defined\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	r = kzalloc(sizeof(struct pxa930_rotary), GFP_KERNEL); | 
 | 	if (!r) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	r->mmio_base = ioremap_nocache(res->start, resource_size(res)); | 
 | 	if (r->mmio_base == NULL) { | 
 | 		dev_err(&pdev->dev, "failed to remap IO memory\n"); | 
 | 		err = -ENXIO; | 
 | 		goto failed_free; | 
 | 	} | 
 |  | 
 | 	r->pdata = pdata; | 
 | 	platform_set_drvdata(pdev, r); | 
 |  | 
 | 	/* allocate and register the input device */ | 
 | 	input_dev = input_allocate_device(); | 
 | 	if (!input_dev) { | 
 | 		dev_err(&pdev->dev, "failed to allocate input device\n"); | 
 | 		err = -ENOMEM; | 
 | 		goto failed_free_io; | 
 | 	} | 
 |  | 
 | 	input_dev->name = pdev->name; | 
 | 	input_dev->id.bustype = BUS_HOST; | 
 | 	input_dev->open = pxa930_rotary_open; | 
 | 	input_dev->close = pxa930_rotary_close; | 
 | 	input_dev->dev.parent = &pdev->dev; | 
 |  | 
 | 	if (pdata->up_key && pdata->down_key) { | 
 | 		__set_bit(pdata->up_key, input_dev->keybit); | 
 | 		__set_bit(pdata->down_key, input_dev->keybit); | 
 | 		__set_bit(EV_KEY, input_dev->evbit); | 
 | 	} else { | 
 | 		__set_bit(pdata->rel_code, input_dev->relbit); | 
 | 		__set_bit(EV_REL, input_dev->evbit); | 
 | 	} | 
 |  | 
 | 	r->input_dev = input_dev; | 
 | 	input_set_drvdata(input_dev, r); | 
 |  | 
 | 	err = request_irq(irq, rotary_irq, 0, | 
 | 			"enhanced rotary", r); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "failed to request IRQ\n"); | 
 | 		goto failed_free_input; | 
 | 	} | 
 |  | 
 | 	err = input_register_device(input_dev); | 
 | 	if (err) { | 
 | 		dev_err(&pdev->dev, "failed to register input device\n"); | 
 | 		goto failed_free_irq; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | failed_free_irq: | 
 | 	free_irq(irq, r); | 
 | failed_free_input: | 
 | 	input_free_device(input_dev); | 
 | failed_free_io: | 
 | 	iounmap(r->mmio_base); | 
 | failed_free: | 
 | 	kfree(r); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __devexit pxa930_rotary_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct pxa930_rotary *r = platform_get_drvdata(pdev); | 
 |  | 
 | 	free_irq(platform_get_irq(pdev, 0), r); | 
 | 	input_unregister_device(r->input_dev); | 
 | 	iounmap(r->mmio_base); | 
 | 	platform_set_drvdata(pdev, NULL); | 
 | 	kfree(r); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver pxa930_rotary_driver = { | 
 | 	.driver		= { | 
 | 		.name	= "pxa930-rotary", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | 	.probe		= pxa930_rotary_probe, | 
 | 	.remove		= __devexit_p(pxa930_rotary_remove), | 
 | }; | 
 | module_platform_driver(pxa930_rotary_driver); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller"); | 
 | MODULE_AUTHOR("Yao Yong <yaoyong@marvell.com>"); |