| /* |
| * $Id: ipconfig.c,v 1.46 2002/02/01 22:01:04 davem Exp $ |
| * |
| * Automatic Configuration of IP -- use DHCP, BOOTP, RARP, or |
| * user-supplied information to configure own IP address and routes. |
| * |
| * Copyright (C) 1996-1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz> |
| * |
| * Derived from network configuration code in fs/nfs/nfsroot.c, |
| * originally Copyright (C) 1995, 1996 Gero Kuhlmann and me. |
| * |
| * BOOTP rewritten to construct and analyse packets itself instead |
| * of misusing the IP layer. num_bugs_causing_wrong_arp_replies--; |
| * -- MJ, December 1998 |
| * |
| * Fixed ip_auto_config_setup calling at startup in the new "Linker Magic" |
| * initialization scheme. |
| * - Arnaldo Carvalho de Melo <acme@conectiva.com.br>, 08/11/1999 |
| * |
| * DHCP support added. To users this looks like a whole separate |
| * protocol, but we know it's just a bag on the side of BOOTP. |
| * -- Chip Salzenberg <chip@valinux.com>, May 2000 |
| * |
| * Ported DHCP support from 2.2.16 to 2.4.0-test4 |
| * -- Eric Biederman <ebiederman@lnxi.com>, 30 Aug 2000 |
| * |
| * Merged changes from 2.2.19 into 2.4.3 |
| * -- Eric Biederman <ebiederman@lnxi.com>, 22 April Aug 2001 |
| * |
| * Multiple Nameservers in /proc/net/pnp |
| * -- Josef Siemes <jsiemes@web.de>, Aug 2002 |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/jiffies.h> |
| #include <linux/random.h> |
| #include <linux/init.h> |
| #include <linux/utsname.h> |
| #include <linux/in.h> |
| #include <linux/if.h> |
| #include <linux/inet.h> |
| #include <linux/inetdevice.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/skbuff.h> |
| #include <linux/ip.h> |
| #include <linux/socket.h> |
| #include <linux/route.h> |
| #include <linux/udp.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/major.h> |
| #include <linux/root_dev.h> |
| #include <linux/delay.h> |
| #include <linux/nfs_fs.h> |
| #include <net/arp.h> |
| #include <net/ip.h> |
| #include <net/ipconfig.h> |
| #include <net/route.h> |
| |
| #include <asm/uaccess.h> |
| #include <net/checksum.h> |
| #include <asm/processor.h> |
| |
| /* Define this to allow debugging output */ |
| #undef IPCONFIG_DEBUG |
| |
| #ifdef IPCONFIG_DEBUG |
| #define DBG(x) printk x |
| #else |
| #define DBG(x) do { } while(0) |
| #endif |
| |
| #if defined(CONFIG_IP_PNP_DHCP) |
| #define IPCONFIG_DHCP |
| #endif |
| #if defined(CONFIG_IP_PNP_BOOTP) || defined(CONFIG_IP_PNP_DHCP) |
| #define IPCONFIG_BOOTP |
| #endif |
| #if defined(CONFIG_IP_PNP_RARP) |
| #define IPCONFIG_RARP |
| #endif |
| #if defined(IPCONFIG_BOOTP) || defined(IPCONFIG_RARP) |
| #define IPCONFIG_DYNAMIC |
| #endif |
| |
| /* Define the friendly delay before and after opening net devices */ |
| #define CONF_PRE_OPEN 500 /* Before opening: 1/2 second */ |
| #define CONF_POST_OPEN 1 /* After opening: 1 second */ |
| |
| /* Define the timeout for waiting for a DHCP/BOOTP/RARP reply */ |
| #define CONF_OPEN_RETRIES 2 /* (Re)open devices twice */ |
| #define CONF_SEND_RETRIES 6 /* Send six requests per open */ |
| #define CONF_INTER_TIMEOUT (HZ/2) /* Inter-device timeout: 1/2 second */ |
| #define CONF_BASE_TIMEOUT (HZ*2) /* Initial timeout: 2 seconds */ |
| #define CONF_TIMEOUT_RANDOM (HZ) /* Maximum amount of randomization */ |
| #define CONF_TIMEOUT_MULT *7/4 /* Rate of timeout growth */ |
| #define CONF_TIMEOUT_MAX (HZ*30) /* Maximum allowed timeout */ |
| #define CONF_NAMESERVERS_MAX 3 /* Maximum number of nameservers |
| - '3' from resolv.h */ |
| |
| #define NONE __constant_htonl(INADDR_NONE) |
| |
| /* |
| * Public IP configuration |
| */ |
| |
| /* This is used by platforms which might be able to set the ipconfig |
| * variables using firmware environment vars. If this is set, it will |
| * ignore such firmware variables. |
| */ |
| int ic_set_manually __initdata = 0; /* IPconfig parameters set manually */ |
| |
| static int ic_enable __initdata = 0; /* IP config enabled? */ |
| |
| /* Protocol choice */ |
| int ic_proto_enabled __initdata = 0 |
| #ifdef IPCONFIG_BOOTP |
| | IC_BOOTP |
| #endif |
| #ifdef CONFIG_IP_PNP_DHCP |
| | IC_USE_DHCP |
| #endif |
| #ifdef IPCONFIG_RARP |
| | IC_RARP |
| #endif |
| ; |
| |
| static int ic_host_name_set __initdata = 0; /* Host name set by us? */ |
| |
| __be32 ic_myaddr = NONE; /* My IP address */ |
| static __be32 ic_netmask = NONE; /* Netmask for local subnet */ |
| __be32 ic_gateway = NONE; /* Gateway IP address */ |
| |
| __be32 ic_servaddr = NONE; /* Boot server IP address */ |
| |
| __be32 root_server_addr = NONE; /* Address of NFS server */ |
| u8 root_server_path[256] = { 0, }; /* Path to mount as root */ |
| |
| /* Persistent data: */ |
| |
| static int ic_proto_used; /* Protocol used, if any */ |
| static __be32 ic_nameservers[CONF_NAMESERVERS_MAX]; /* DNS Server IP addresses */ |
| static u8 ic_domain[64]; /* DNS (not NIS) domain name */ |
| |
| /* |
| * Private state. |
| */ |
| |
| /* Name of user-selected boot device */ |
| static char user_dev_name[IFNAMSIZ] __initdata = { 0, }; |
| |
| /* Protocols supported by available interfaces */ |
| static int ic_proto_have_if __initdata = 0; |
| |
| #ifdef IPCONFIG_DYNAMIC |
| static DEFINE_SPINLOCK(ic_recv_lock); |
| static volatile int ic_got_reply __initdata = 0; /* Proto(s) that replied */ |
| #endif |
| #ifdef IPCONFIG_DHCP |
| static int ic_dhcp_msgtype __initdata = 0; /* DHCP msg type received */ |
| #endif |
| |
| |
| /* |
| * Network devices |
| */ |
| |
| struct ic_device { |
| struct ic_device *next; |
| struct net_device *dev; |
| unsigned short flags; |
| short able; |
| __be32 xid; |
| }; |
| |
| static struct ic_device *ic_first_dev __initdata = NULL;/* List of open device */ |
| static struct net_device *ic_dev __initdata = NULL; /* Selected device */ |
| |
| static int __init ic_open_devs(void) |
| { |
| struct ic_device *d, **last; |
| struct net_device *dev; |
| unsigned short oflags; |
| |
| last = &ic_first_dev; |
| rtnl_lock(); |
| |
| /* bring loopback device up first */ |
| if (dev_change_flags(&loopback_dev, loopback_dev.flags | IFF_UP) < 0) |
| printk(KERN_ERR "IP-Config: Failed to open %s\n", loopback_dev.name); |
| |
| for (dev = dev_base; dev; dev = dev->next) { |
| if (dev == &loopback_dev) |
| continue; |
| if (user_dev_name[0] ? !strcmp(dev->name, user_dev_name) : |
| (!(dev->flags & IFF_LOOPBACK) && |
| (dev->flags & (IFF_POINTOPOINT|IFF_BROADCAST)) && |
| strncmp(dev->name, "dummy", 5))) { |
| int able = 0; |
| if (dev->mtu >= 364) |
| able |= IC_BOOTP; |
| else |
| printk(KERN_WARNING "DHCP/BOOTP: Ignoring device %s, MTU %d too small", dev->name, dev->mtu); |
| if (!(dev->flags & IFF_NOARP)) |
| able |= IC_RARP; |
| able &= ic_proto_enabled; |
| if (ic_proto_enabled && !able) |
| continue; |
| oflags = dev->flags; |
| if (dev_change_flags(dev, oflags | IFF_UP) < 0) { |
| printk(KERN_ERR "IP-Config: Failed to open %s\n", dev->name); |
| continue; |
| } |
| if (!(d = kmalloc(sizeof(struct ic_device), GFP_KERNEL))) { |
| rtnl_unlock(); |
| return -1; |
| } |
| d->dev = dev; |
| *last = d; |
| last = &d->next; |
| d->flags = oflags; |
| d->able = able; |
| if (able & IC_BOOTP) |
| get_random_bytes(&d->xid, sizeof(__be32)); |
| else |
| d->xid = 0; |
| ic_proto_have_if |= able; |
| DBG(("IP-Config: %s UP (able=%d, xid=%08x)\n", |
| dev->name, able, d->xid)); |
| } |
| } |
| rtnl_unlock(); |
| |
| *last = NULL; |
| |
| if (!ic_first_dev) { |
| if (user_dev_name[0]) |
| printk(KERN_ERR "IP-Config: Device `%s' not found.\n", user_dev_name); |
| else |
| printk(KERN_ERR "IP-Config: No network devices available.\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static void __init ic_close_devs(void) |
| { |
| struct ic_device *d, *next; |
| struct net_device *dev; |
| |
| rtnl_lock(); |
| next = ic_first_dev; |
| while ((d = next)) { |
| next = d->next; |
| dev = d->dev; |
| if (dev != ic_dev) { |
| DBG(("IP-Config: Downing %s\n", dev->name)); |
| dev_change_flags(dev, d->flags); |
| } |
| kfree(d); |
| } |
| rtnl_unlock(); |
| } |
| |
| /* |
| * Interface to various network functions. |
| */ |
| |
| static inline void |
| set_sockaddr(struct sockaddr_in *sin, __be32 addr, __be16 port) |
| { |
| sin->sin_family = AF_INET; |
| sin->sin_addr.s_addr = addr; |
| sin->sin_port = port; |
| } |
| |
| static int __init ic_dev_ioctl(unsigned int cmd, struct ifreq *arg) |
| { |
| int res; |
| |
| mm_segment_t oldfs = get_fs(); |
| set_fs(get_ds()); |
| res = devinet_ioctl(cmd, (struct ifreq __user *) arg); |
| set_fs(oldfs); |
| return res; |
| } |
| |
| static int __init ic_route_ioctl(unsigned int cmd, struct rtentry *arg) |
| { |
| int res; |
| |
| mm_segment_t oldfs = get_fs(); |
| set_fs(get_ds()); |
| res = ip_rt_ioctl(cmd, (void __user *) arg); |
| set_fs(oldfs); |
| return res; |
| } |
| |
| /* |
| * Set up interface addresses and routes. |
| */ |
| |
| static int __init ic_setup_if(void) |
| { |
| struct ifreq ir; |
| struct sockaddr_in *sin = (void *) &ir.ifr_ifru.ifru_addr; |
| int err; |
| |
| memset(&ir, 0, sizeof(ir)); |
| strcpy(ir.ifr_ifrn.ifrn_name, ic_dev->name); |
| set_sockaddr(sin, ic_myaddr, 0); |
| if ((err = ic_dev_ioctl(SIOCSIFADDR, &ir)) < 0) { |
| printk(KERN_ERR "IP-Config: Unable to set interface address (%d).\n", err); |
| return -1; |
| } |
| set_sockaddr(sin, ic_netmask, 0); |
| if ((err = ic_dev_ioctl(SIOCSIFNETMASK, &ir)) < 0) { |
| printk(KERN_ERR "IP-Config: Unable to set interface netmask (%d).\n", err); |
| return -1; |
| } |
| set_sockaddr(sin, ic_myaddr | ~ic_netmask, 0); |
| if ((err = ic_dev_ioctl(SIOCSIFBRDADDR, &ir)) < 0) { |
| printk(KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n", err); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int __init ic_setup_routes(void) |
| { |
| /* No need to setup device routes, only the default route... */ |
| |
| if (ic_gateway != NONE) { |
| struct rtentry rm; |
| int err; |
| |
| memset(&rm, 0, sizeof(rm)); |
| if ((ic_gateway ^ ic_myaddr) & ic_netmask) { |
| printk(KERN_ERR "IP-Config: Gateway not on directly connected network.\n"); |
| return -1; |
| } |
| set_sockaddr((struct sockaddr_in *) &rm.rt_dst, 0, 0); |
| set_sockaddr((struct sockaddr_in *) &rm.rt_genmask, 0, 0); |
| set_sockaddr((struct sockaddr_in *) &rm.rt_gateway, ic_gateway, 0); |
| rm.rt_flags = RTF_UP | RTF_GATEWAY; |
| if ((err = ic_route_ioctl(SIOCADDRT, &rm)) < 0) { |
| printk(KERN_ERR "IP-Config: Cannot add default route (%d).\n", err); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Fill in default values for all missing parameters. |
| */ |
| |
| static int __init ic_defaults(void) |
| { |
| /* |
| * At this point we have no userspace running so need not |
| * claim locks on system_utsname |
| */ |
| |
| if (!ic_host_name_set) |
| sprintf(init_utsname()->nodename, "%u.%u.%u.%u", NIPQUAD(ic_myaddr)); |
| |
| if (root_server_addr == NONE) |
| root_server_addr = ic_servaddr; |
| |
| if (ic_netmask == NONE) { |
| if (IN_CLASSA(ntohl(ic_myaddr))) |
| ic_netmask = htonl(IN_CLASSA_NET); |
| else if (IN_CLASSB(ntohl(ic_myaddr))) |
| ic_netmask = htonl(IN_CLASSB_NET); |
| else if (IN_CLASSC(ntohl(ic_myaddr))) |
| ic_netmask = htonl(IN_CLASSC_NET); |
| else { |
| printk(KERN_ERR "IP-Config: Unable to guess netmask for address %u.%u.%u.%u\n", |
| NIPQUAD(ic_myaddr)); |
| return -1; |
| } |
| printk("IP-Config: Guessing netmask %u.%u.%u.%u\n", NIPQUAD(ic_netmask)); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * RARP support. |
| */ |
| |
| #ifdef IPCONFIG_RARP |
| |
| static int ic_rarp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev); |
| |
| static struct packet_type rarp_packet_type __initdata = { |
| .type = __constant_htons(ETH_P_RARP), |
| .func = ic_rarp_recv, |
| }; |
| |
| static inline void ic_rarp_init(void) |
| { |
| dev_add_pack(&rarp_packet_type); |
| } |
| |
| static inline void ic_rarp_cleanup(void) |
| { |
| dev_remove_pack(&rarp_packet_type); |
| } |
| |
| /* |
| * Process received RARP packet. |
| */ |
| static int __init |
| ic_rarp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) |
| { |
| struct arphdr *rarp; |
| unsigned char *rarp_ptr; |
| __be32 sip, tip; |
| unsigned char *sha, *tha; /* s for "source", t for "target" */ |
| struct ic_device *d; |
| |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) |
| return NET_RX_DROP; |
| |
| if (!pskb_may_pull(skb, sizeof(struct arphdr))) |
| goto drop; |
| |
| /* Basic sanity checks can be done without the lock. */ |
| rarp = (struct arphdr *)skb_transport_header(skb); |
| |
| /* If this test doesn't pass, it's not IP, or we should |
| * ignore it anyway. |
| */ |
| if (rarp->ar_hln != dev->addr_len || dev->type != ntohs(rarp->ar_hrd)) |
| goto drop; |
| |
| /* If it's not a RARP reply, delete it. */ |
| if (rarp->ar_op != htons(ARPOP_RREPLY)) |
| goto drop; |
| |
| /* If it's not Ethernet, delete it. */ |
| if (rarp->ar_pro != htons(ETH_P_IP)) |
| goto drop; |
| |
| if (!pskb_may_pull(skb, |
| sizeof(struct arphdr) + |
| (2 * dev->addr_len) + |
| (2 * 4))) |
| goto drop; |
| |
| /* OK, it is all there and looks valid, process... */ |
| rarp = (struct arphdr *)skb_transport_header(skb); |
| rarp_ptr = (unsigned char *) (rarp + 1); |
| |
| /* One reply at a time, please. */ |
| spin_lock(&ic_recv_lock); |
| |
| /* If we already have a reply, just drop the packet */ |
| if (ic_got_reply) |
| goto drop_unlock; |
| |
| /* Find the ic_device that the packet arrived on */ |
| d = ic_first_dev; |
| while (d && d->dev != dev) |
| d = d->next; |
| if (!d) |
| goto drop_unlock; /* should never happen */ |
| |
| /* Extract variable-width fields */ |
| sha = rarp_ptr; |
| rarp_ptr += dev->addr_len; |
| memcpy(&sip, rarp_ptr, 4); |
| rarp_ptr += 4; |
| tha = rarp_ptr; |
| rarp_ptr += dev->addr_len; |
| memcpy(&tip, rarp_ptr, 4); |
| |
| /* Discard packets which are not meant for us. */ |
| if (memcmp(tha, dev->dev_addr, dev->addr_len)) |
| goto drop_unlock; |
| |
| /* Discard packets which are not from specified server. */ |
| if (ic_servaddr != NONE && ic_servaddr != sip) |
| goto drop_unlock; |
| |
| /* We have a winner! */ |
| ic_dev = dev; |
| if (ic_myaddr == NONE) |
| ic_myaddr = tip; |
| ic_servaddr = sip; |
| ic_got_reply = IC_RARP; |
| |
| drop_unlock: |
| /* Show's over. Nothing to see here. */ |
| spin_unlock(&ic_recv_lock); |
| |
| drop: |
| /* Throw the packet out. */ |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| |
| /* |
| * Send RARP request packet over a single interface. |
| */ |
| static void __init ic_rarp_send_if(struct ic_device *d) |
| { |
| struct net_device *dev = d->dev; |
| arp_send(ARPOP_RREQUEST, ETH_P_RARP, 0, dev, 0, NULL, |
| dev->dev_addr, dev->dev_addr); |
| } |
| #endif |
| |
| /* |
| * DHCP/BOOTP support. |
| */ |
| |
| #ifdef IPCONFIG_BOOTP |
| |
| struct bootp_pkt { /* BOOTP packet format */ |
| struct iphdr iph; /* IP header */ |
| struct udphdr udph; /* UDP header */ |
| u8 op; /* 1=request, 2=reply */ |
| u8 htype; /* HW address type */ |
| u8 hlen; /* HW address length */ |
| u8 hops; /* Used only by gateways */ |
| __be32 xid; /* Transaction ID */ |
| __be16 secs; /* Seconds since we started */ |
| __be16 flags; /* Just what it says */ |
| __be32 client_ip; /* Client's IP address if known */ |
| __be32 your_ip; /* Assigned IP address */ |
| __be32 server_ip; /* (Next, e.g. NFS) Server's IP address */ |
| __be32 relay_ip; /* IP address of BOOTP relay */ |
| u8 hw_addr[16]; /* Client's HW address */ |
| u8 serv_name[64]; /* Server host name */ |
| u8 boot_file[128]; /* Name of boot file */ |
| u8 exten[312]; /* DHCP options / BOOTP vendor extensions */ |
| }; |
| |
| /* packet ops */ |
| #define BOOTP_REQUEST 1 |
| #define BOOTP_REPLY 2 |
| |
| /* DHCP message types */ |
| #define DHCPDISCOVER 1 |
| #define DHCPOFFER 2 |
| #define DHCPREQUEST 3 |
| #define DHCPDECLINE 4 |
| #define DHCPACK 5 |
| #define DHCPNAK 6 |
| #define DHCPRELEASE 7 |
| #define DHCPINFORM 8 |
| |
| static int ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev); |
| |
| static struct packet_type bootp_packet_type __initdata = { |
| .type = __constant_htons(ETH_P_IP), |
| .func = ic_bootp_recv, |
| }; |
| |
| |
| /* |
| * Initialize DHCP/BOOTP extension fields in the request. |
| */ |
| |
| static const u8 ic_bootp_cookie[4] = { 99, 130, 83, 99 }; |
| |
| #ifdef IPCONFIG_DHCP |
| |
| static void __init |
| ic_dhcp_init_options(u8 *options) |
| { |
| u8 mt = ((ic_servaddr == NONE) |
| ? DHCPDISCOVER : DHCPREQUEST); |
| u8 *e = options; |
| |
| #ifdef IPCONFIG_DEBUG |
| printk("DHCP: Sending message type %d\n", mt); |
| #endif |
| |
| memcpy(e, ic_bootp_cookie, 4); /* RFC1048 Magic Cookie */ |
| e += 4; |
| |
| *e++ = 53; /* DHCP message type */ |
| *e++ = 1; |
| *e++ = mt; |
| |
| if (mt == DHCPREQUEST) { |
| *e++ = 54; /* Server ID (IP address) */ |
| *e++ = 4; |
| memcpy(e, &ic_servaddr, 4); |
| e += 4; |
| |
| *e++ = 50; /* Requested IP address */ |
| *e++ = 4; |
| memcpy(e, &ic_myaddr, 4); |
| e += 4; |
| } |
| |
| /* always? */ |
| { |
| static const u8 ic_req_params[] = { |
| 1, /* Subnet mask */ |
| 3, /* Default gateway */ |
| 6, /* DNS server */ |
| 12, /* Host name */ |
| 15, /* Domain name */ |
| 17, /* Boot path */ |
| 40, /* NIS domain name */ |
| }; |
| |
| *e++ = 55; /* Parameter request list */ |
| *e++ = sizeof(ic_req_params); |
| memcpy(e, ic_req_params, sizeof(ic_req_params)); |
| e += sizeof(ic_req_params); |
| } |
| |
| *e++ = 255; /* End of the list */ |
| } |
| |
| #endif /* IPCONFIG_DHCP */ |
| |
| static void __init ic_bootp_init_ext(u8 *e) |
| { |
| memcpy(e, ic_bootp_cookie, 4); /* RFC1048 Magic Cookie */ |
| e += 4; |
| *e++ = 1; /* Subnet mask request */ |
| *e++ = 4; |
| e += 4; |
| *e++ = 3; /* Default gateway request */ |
| *e++ = 4; |
| e += 4; |
| *e++ = 5; /* Name server request */ |
| *e++ = 8; |
| e += 8; |
| *e++ = 12; /* Host name request */ |
| *e++ = 32; |
| e += 32; |
| *e++ = 40; /* NIS Domain name request */ |
| *e++ = 32; |
| e += 32; |
| *e++ = 17; /* Boot path */ |
| *e++ = 40; |
| e += 40; |
| |
| *e++ = 57; /* set extension buffer size for reply */ |
| *e++ = 2; |
| *e++ = 1; /* 128+236+8+20+14, see dhcpd sources */ |
| *e++ = 150; |
| |
| *e++ = 255; /* End of the list */ |
| } |
| |
| |
| /* |
| * Initialize the DHCP/BOOTP mechanism. |
| */ |
| static inline void ic_bootp_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < CONF_NAMESERVERS_MAX; i++) |
| ic_nameservers[i] = NONE; |
| |
| dev_add_pack(&bootp_packet_type); |
| } |
| |
| |
| /* |
| * DHCP/BOOTP cleanup. |
| */ |
| static inline void ic_bootp_cleanup(void) |
| { |
| dev_remove_pack(&bootp_packet_type); |
| } |
| |
| |
| /* |
| * Send DHCP/BOOTP request to single interface. |
| */ |
| static void __init ic_bootp_send_if(struct ic_device *d, unsigned long jiffies_diff) |
| { |
| struct net_device *dev = d->dev; |
| struct sk_buff *skb; |
| struct bootp_pkt *b; |
| int hh_len = LL_RESERVED_SPACE(dev); |
| struct iphdr *h; |
| |
| /* Allocate packet */ |
| skb = alloc_skb(sizeof(struct bootp_pkt) + hh_len + 15, GFP_KERNEL); |
| if (!skb) |
| return; |
| skb_reserve(skb, hh_len); |
| b = (struct bootp_pkt *) skb_put(skb, sizeof(struct bootp_pkt)); |
| memset(b, 0, sizeof(struct bootp_pkt)); |
| |
| /* Construct IP header */ |
| skb_reset_network_header(skb); |
| h = ip_hdr(skb); |
| h->version = 4; |
| h->ihl = 5; |
| h->tot_len = htons(sizeof(struct bootp_pkt)); |
| h->frag_off = htons(IP_DF); |
| h->ttl = 64; |
| h->protocol = IPPROTO_UDP; |
| h->daddr = htonl(INADDR_BROADCAST); |
| h->check = ip_fast_csum((unsigned char *) h, h->ihl); |
| |
| /* Construct UDP header */ |
| b->udph.source = htons(68); |
| b->udph.dest = htons(67); |
| b->udph.len = htons(sizeof(struct bootp_pkt) - sizeof(struct iphdr)); |
| /* UDP checksum not calculated -- explicitly allowed in BOOTP RFC */ |
| |
| /* Construct DHCP/BOOTP header */ |
| b->op = BOOTP_REQUEST; |
| if (dev->type < 256) /* check for false types */ |
| b->htype = dev->type; |
| else if (dev->type == ARPHRD_IEEE802_TR) /* fix for token ring */ |
| b->htype = ARPHRD_IEEE802; |
| else if (dev->type == ARPHRD_FDDI) |
| b->htype = ARPHRD_ETHER; |
| else { |
| printk("Unknown ARP type 0x%04x for device %s\n", dev->type, dev->name); |
| b->htype = dev->type; /* can cause undefined behavior */ |
| } |
| b->hlen = dev->addr_len; |
| b->your_ip = NONE; |
| b->server_ip = NONE; |
| memcpy(b->hw_addr, dev->dev_addr, dev->addr_len); |
| b->secs = htons(jiffies_diff / HZ); |
| b->xid = d->xid; |
| |
| /* add DHCP options or BOOTP extensions */ |
| #ifdef IPCONFIG_DHCP |
| if (ic_proto_enabled & IC_USE_DHCP) |
| ic_dhcp_init_options(b->exten); |
| else |
| #endif |
| ic_bootp_init_ext(b->exten); |
| |
| /* Chain packet down the line... */ |
| skb->dev = dev; |
| skb->protocol = htons(ETH_P_IP); |
| if ((dev->hard_header && |
| dev->hard_header(skb, dev, ntohs(skb->protocol), dev->broadcast, dev->dev_addr, skb->len) < 0) || |
| dev_queue_xmit(skb) < 0) |
| printk("E"); |
| } |
| |
| |
| /* |
| * Copy BOOTP-supplied string if not already set. |
| */ |
| static int __init ic_bootp_string(char *dest, char *src, int len, int max) |
| { |
| if (!len) |
| return 0; |
| if (len > max-1) |
| len = max-1; |
| memcpy(dest, src, len); |
| dest[len] = '\0'; |
| return 1; |
| } |
| |
| |
| /* |
| * Process BOOTP extensions. |
| */ |
| static void __init ic_do_bootp_ext(u8 *ext) |
| { |
| u8 servers; |
| int i; |
| |
| #ifdef IPCONFIG_DEBUG |
| u8 *c; |
| |
| printk("DHCP/BOOTP: Got extension %d:",*ext); |
| for (c=ext+2; c<ext+2+ext[1]; c++) |
| printk(" %02x", *c); |
| printk("\n"); |
| #endif |
| |
| switch (*ext++) { |
| case 1: /* Subnet mask */ |
| if (ic_netmask == NONE) |
| memcpy(&ic_netmask, ext+1, 4); |
| break; |
| case 3: /* Default gateway */ |
| if (ic_gateway == NONE) |
| memcpy(&ic_gateway, ext+1, 4); |
| break; |
| case 6: /* DNS server */ |
| servers= *ext/4; |
| if (servers > CONF_NAMESERVERS_MAX) |
| servers = CONF_NAMESERVERS_MAX; |
| for (i = 0; i < servers; i++) { |
| if (ic_nameservers[i] == NONE) |
| memcpy(&ic_nameservers[i], ext+1+4*i, 4); |
| } |
| break; |
| case 12: /* Host name */ |
| ic_bootp_string(utsname()->nodename, ext+1, *ext, __NEW_UTS_LEN); |
| ic_host_name_set = 1; |
| break; |
| case 15: /* Domain name (DNS) */ |
| ic_bootp_string(ic_domain, ext+1, *ext, sizeof(ic_domain)); |
| break; |
| case 17: /* Root path */ |
| if (!root_server_path[0]) |
| ic_bootp_string(root_server_path, ext+1, *ext, sizeof(root_server_path)); |
| break; |
| case 40: /* NIS Domain name (_not_ DNS) */ |
| ic_bootp_string(utsname()->domainname, ext+1, *ext, __NEW_UTS_LEN); |
| break; |
| } |
| } |
| |
| |
| /* |
| * Receive BOOTP reply. |
| */ |
| static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) |
| { |
| struct bootp_pkt *b; |
| struct iphdr *h; |
| struct ic_device *d; |
| int len, ext_len; |
| |
| /* Perform verifications before taking the lock. */ |
| if (skb->pkt_type == PACKET_OTHERHOST) |
| goto drop; |
| |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) |
| return NET_RX_DROP; |
| |
| if (!pskb_may_pull(skb, |
| sizeof(struct iphdr) + |
| sizeof(struct udphdr))) |
| goto drop; |
| |
| b = (struct bootp_pkt *)skb_network_header(skb); |
| h = &b->iph; |
| |
| if (h->ihl != 5 || h->version != 4 || h->protocol != IPPROTO_UDP) |
| goto drop; |
| |
| /* Fragments are not supported */ |
| if (h->frag_off & htons(IP_OFFSET | IP_MF)) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "DHCP/BOOTP: Ignoring fragmented " |
| "reply.\n"); |
| goto drop; |
| } |
| |
| if (skb->len < ntohs(h->tot_len)) |
| goto drop; |
| |
| if (ip_fast_csum((char *) h, h->ihl)) |
| goto drop; |
| |
| if (b->udph.source != htons(67) || b->udph.dest != htons(68)) |
| goto drop; |
| |
| if (ntohs(h->tot_len) < ntohs(b->udph.len) + sizeof(struct iphdr)) |
| goto drop; |
| |
| len = ntohs(b->udph.len) - sizeof(struct udphdr); |
| ext_len = len - (sizeof(*b) - |
| sizeof(struct iphdr) - |
| sizeof(struct udphdr) - |
| sizeof(b->exten)); |
| if (ext_len < 0) |
| goto drop; |
| |
| /* Ok the front looks good, make sure we can get at the rest. */ |
| if (!pskb_may_pull(skb, skb->len)) |
| goto drop; |
| |
| b = (struct bootp_pkt *)skb_network_header(skb); |
| h = &b->iph; |
| |
| /* One reply at a time, please. */ |
| spin_lock(&ic_recv_lock); |
| |
| /* If we already have a reply, just drop the packet */ |
| if (ic_got_reply) |
| goto drop_unlock; |
| |
| /* Find the ic_device that the packet arrived on */ |
| d = ic_first_dev; |
| while (d && d->dev != dev) |
| d = d->next; |
| if (!d) |
| goto drop_unlock; /* should never happen */ |
| |
| /* Is it a reply to our BOOTP request? */ |
| if (b->op != BOOTP_REPLY || |
| b->xid != d->xid) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "DHCP/BOOTP: Reply not for us, " |
| "op[%x] xid[%x]\n", |
| b->op, b->xid); |
| goto drop_unlock; |
| } |
| |
| /* Parse extensions */ |
| if (ext_len >= 4 && |
| !memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */ |
| u8 *end = (u8 *) b + ntohs(b->iph.tot_len); |
| u8 *ext; |
| |
| #ifdef IPCONFIG_DHCP |
| if (ic_proto_enabled & IC_USE_DHCP) { |
| __be32 server_id = NONE; |
| int mt = 0; |
| |
| ext = &b->exten[4]; |
| while (ext < end && *ext != 0xff) { |
| u8 *opt = ext++; |
| if (*opt == 0) /* Padding */ |
| continue; |
| ext += *ext + 1; |
| if (ext >= end) |
| break; |
| switch (*opt) { |
| case 53: /* Message type */ |
| if (opt[1]) |
| mt = opt[2]; |
| break; |
| case 54: /* Server ID (IP address) */ |
| if (opt[1] >= 4) |
| memcpy(&server_id, opt + 2, 4); |
| break; |
| }; |
| } |
| |
| #ifdef IPCONFIG_DEBUG |
| printk("DHCP: Got message type %d\n", mt); |
| #endif |
| |
| switch (mt) { |
| case DHCPOFFER: |
| /* While in the process of accepting one offer, |
| * ignore all others. |
| */ |
| if (ic_myaddr != NONE) |
| goto drop_unlock; |
| |
| /* Let's accept that offer. */ |
| ic_myaddr = b->your_ip; |
| ic_servaddr = server_id; |
| #ifdef IPCONFIG_DEBUG |
| printk("DHCP: Offered address %u.%u.%u.%u", |
| NIPQUAD(ic_myaddr)); |
| printk(" by server %u.%u.%u.%u\n", |
| NIPQUAD(ic_servaddr)); |
| #endif |
| /* The DHCP indicated server address takes |
| * precedence over the bootp header one if |
| * they are different. |
| */ |
| if ((server_id != NONE) && |
| (b->server_ip != server_id)) |
| b->server_ip = ic_servaddr; |
| break; |
| |
| case DHCPACK: |
| if (memcmp(dev->dev_addr, b->hw_addr, dev->addr_len) != 0) |
| goto drop_unlock; |
| |
| /* Yeah! */ |
| break; |
| |
| default: |
| /* Urque. Forget it*/ |
| ic_myaddr = NONE; |
| ic_servaddr = NONE; |
| goto drop_unlock; |
| }; |
| |
| ic_dhcp_msgtype = mt; |
| |
| } |
| #endif /* IPCONFIG_DHCP */ |
| |
| ext = &b->exten[4]; |
| while (ext < end && *ext != 0xff) { |
| u8 *opt = ext++; |
| if (*opt == 0) /* Padding */ |
| continue; |
| ext += *ext + 1; |
| if (ext < end) |
| ic_do_bootp_ext(opt); |
| } |
| } |
| |
| /* We have a winner! */ |
| ic_dev = dev; |
| ic_myaddr = b->your_ip; |
| ic_servaddr = b->server_ip; |
| if (ic_gateway == NONE && b->relay_ip) |
| ic_gateway = b->relay_ip; |
| if (ic_nameservers[0] == NONE) |
| ic_nameservers[0] = ic_servaddr; |
| ic_got_reply = IC_BOOTP; |
| |
| drop_unlock: |
| /* Show's over. Nothing to see here. */ |
| spin_unlock(&ic_recv_lock); |
| |
| drop: |
| /* Throw the packet out. */ |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| |
| #endif |
| |
| |
| /* |
| * Dynamic IP configuration -- DHCP, BOOTP, RARP. |
| */ |
| |
| #ifdef IPCONFIG_DYNAMIC |
| |
| static int __init ic_dynamic(void) |
| { |
| int retries; |
| struct ic_device *d; |
| unsigned long start_jiffies, timeout, jiff; |
| int do_bootp = ic_proto_have_if & IC_BOOTP; |
| int do_rarp = ic_proto_have_if & IC_RARP; |
| |
| /* |
| * If none of DHCP/BOOTP/RARP was selected, return with an error. |
| * This routine gets only called when some pieces of information |
| * are missing, and without DHCP/BOOTP/RARP we are unable to get it. |
| */ |
| if (!ic_proto_enabled) { |
| printk(KERN_ERR "IP-Config: Incomplete network configuration information.\n"); |
| return -1; |
| } |
| |
| #ifdef IPCONFIG_BOOTP |
| if ((ic_proto_enabled ^ ic_proto_have_if) & IC_BOOTP) |
| printk(KERN_ERR "DHCP/BOOTP: No suitable device found.\n"); |
| #endif |
| #ifdef IPCONFIG_RARP |
| if ((ic_proto_enabled ^ ic_proto_have_if) & IC_RARP) |
| printk(KERN_ERR "RARP: No suitable device found.\n"); |
| #endif |
| |
| if (!ic_proto_have_if) |
| /* Error message already printed */ |
| return -1; |
| |
| /* |
| * Setup protocols |
| */ |
| #ifdef IPCONFIG_BOOTP |
| if (do_bootp) |
| ic_bootp_init(); |
| #endif |
| #ifdef IPCONFIG_RARP |
| if (do_rarp) |
| ic_rarp_init(); |
| #endif |
| |
| /* |
| * Send requests and wait, until we get an answer. This loop |
| * seems to be a terrible waste of CPU time, but actually there is |
| * only one process running at all, so we don't need to use any |
| * scheduler functions. |
| * [Actually we could now, but the nothing else running note still |
| * applies.. - AC] |
| */ |
| printk(KERN_NOTICE "Sending %s%s%s requests .", |
| do_bootp |
| ? ((ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP") : "", |
| (do_bootp && do_rarp) ? " and " : "", |
| do_rarp ? "RARP" : ""); |
| |
| start_jiffies = jiffies; |
| d = ic_first_dev; |
| retries = CONF_SEND_RETRIES; |
| get_random_bytes(&timeout, sizeof(timeout)); |
| timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM); |
| for (;;) { |
| #ifdef IPCONFIG_BOOTP |
| if (do_bootp && (d->able & IC_BOOTP)) |
| ic_bootp_send_if(d, jiffies - start_jiffies); |
| #endif |
| #ifdef IPCONFIG_RARP |
| if (do_rarp && (d->able & IC_RARP)) |
| ic_rarp_send_if(d); |
| #endif |
| |
| jiff = jiffies + (d->next ? CONF_INTER_TIMEOUT : timeout); |
| while (time_before(jiffies, jiff) && !ic_got_reply) |
| schedule_timeout_uninterruptible(1); |
| #ifdef IPCONFIG_DHCP |
| /* DHCP isn't done until we get a DHCPACK. */ |
| if ((ic_got_reply & IC_BOOTP) |
| && (ic_proto_enabled & IC_USE_DHCP) |
| && ic_dhcp_msgtype != DHCPACK) |
| { |
| ic_got_reply = 0; |
| printk(","); |
| continue; |
| } |
| #endif /* IPCONFIG_DHCP */ |
| |
| if (ic_got_reply) { |
| printk(" OK\n"); |
| break; |
| } |
| |
| if ((d = d->next)) |
| continue; |
| |
| if (! --retries) { |
| printk(" timed out!\n"); |
| break; |
| } |
| |
| d = ic_first_dev; |
| |
| timeout = timeout CONF_TIMEOUT_MULT; |
| if (timeout > CONF_TIMEOUT_MAX) |
| timeout = CONF_TIMEOUT_MAX; |
| |
| printk("."); |
| } |
| |
| #ifdef IPCONFIG_BOOTP |
| if (do_bootp) |
| ic_bootp_cleanup(); |
| #endif |
| #ifdef IPCONFIG_RARP |
| if (do_rarp) |
| ic_rarp_cleanup(); |
| #endif |
| |
| if (!ic_got_reply) { |
| ic_myaddr = NONE; |
| return -1; |
| } |
| |
| printk("IP-Config: Got %s answer from %u.%u.%u.%u, ", |
| ((ic_got_reply & IC_RARP) ? "RARP" |
| : (ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP"), |
| NIPQUAD(ic_servaddr)); |
| printk("my address is %u.%u.%u.%u\n", NIPQUAD(ic_myaddr)); |
| |
| return 0; |
| } |
| |
| #endif /* IPCONFIG_DYNAMIC */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| static int pnp_seq_show(struct seq_file *seq, void *v) |
| { |
| int i; |
| |
| if (ic_proto_used & IC_PROTO) |
| seq_printf(seq, "#PROTO: %s\n", |
| (ic_proto_used & IC_RARP) ? "RARP" |
| : (ic_proto_used & IC_USE_DHCP) ? "DHCP" : "BOOTP"); |
| else |
| seq_puts(seq, "#MANUAL\n"); |
| |
| if (ic_domain[0]) |
| seq_printf(seq, |
| "domain %s\n", ic_domain); |
| for (i = 0; i < CONF_NAMESERVERS_MAX; i++) { |
| if (ic_nameservers[i] != NONE) |
| seq_printf(seq, |
| "nameserver %u.%u.%u.%u\n", |
| NIPQUAD(ic_nameservers[i])); |
| } |
| if (ic_servaddr != NONE) |
| seq_printf(seq, |
| "bootserver %u.%u.%u.%u\n", |
| NIPQUAD(ic_servaddr)); |
| return 0; |
| } |
| |
| static int pnp_seq_open(struct inode *indoe, struct file *file) |
| { |
| return single_open(file, pnp_seq_show, NULL); |
| } |
| |
| static const struct file_operations pnp_seq_fops = { |
| .owner = THIS_MODULE, |
| .open = pnp_seq_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * Extract IP address from the parameter string if needed. Note that we |
| * need to have root_server_addr set _before_ IPConfig gets called as it |
| * can override it. |
| */ |
| __be32 __init root_nfs_parse_addr(char *name) |
| { |
| __be32 addr; |
| int octets = 0; |
| char *cp, *cq; |
| |
| cp = cq = name; |
| while (octets < 4) { |
| while (*cp >= '0' && *cp <= '9') |
| cp++; |
| if (cp == cq || cp - cq > 3) |
| break; |
| if (*cp == '.' || octets == 3) |
| octets++; |
| if (octets < 4) |
| cp++; |
| cq = cp; |
| } |
| if (octets == 4 && (*cp == ':' || *cp == '\0')) { |
| if (*cp == ':') |
| *cp++ = '\0'; |
| addr = in_aton(name); |
| memmove(name, cp, strlen(cp) + 1); |
| } else |
| addr = NONE; |
| |
| return addr; |
| } |
| |
| /* |
| * IP Autoconfig dispatcher. |
| */ |
| |
| static int __init ip_auto_config(void) |
| { |
| __be32 addr; |
| |
| #ifdef CONFIG_PROC_FS |
| proc_net_fops_create("pnp", S_IRUGO, &pnp_seq_fops); |
| #endif /* CONFIG_PROC_FS */ |
| |
| if (!ic_enable) |
| return 0; |
| |
| DBG(("IP-Config: Entered.\n")); |
| #ifdef IPCONFIG_DYNAMIC |
| try_try_again: |
| #endif |
| /* Give hardware a chance to settle */ |
| msleep(CONF_PRE_OPEN); |
| |
| /* Setup all network devices */ |
| if (ic_open_devs() < 0) |
| return -1; |
| |
| /* Give drivers a chance to settle */ |
| ssleep(CONF_POST_OPEN); |
| |
| /* |
| * If the config information is insufficient (e.g., our IP address or |
| * IP address of the boot server is missing or we have multiple network |
| * interfaces and no default was set), use BOOTP or RARP to get the |
| * missing values. |
| */ |
| if (ic_myaddr == NONE || |
| #ifdef CONFIG_ROOT_NFS |
| (MAJOR(ROOT_DEV) == UNNAMED_MAJOR |
| && root_server_addr == NONE |
| && ic_servaddr == NONE) || |
| #endif |
| ic_first_dev->next) { |
| #ifdef IPCONFIG_DYNAMIC |
| |
| int retries = CONF_OPEN_RETRIES; |
| |
| if (ic_dynamic() < 0) { |
| ic_close_devs(); |
| |
| /* |
| * I don't know why, but sometimes the |
| * eepro100 driver (at least) gets upset and |
| * doesn't work the first time it's opened. |
| * But then if you close it and reopen it, it |
| * works just fine. So we need to try that at |
| * least once before giving up. |
| * |
| * Also, if the root will be NFS-mounted, we |
| * have nowhere to go if DHCP fails. So we |
| * just have to keep trying forever. |
| * |
| * -- Chip |
| */ |
| #ifdef CONFIG_ROOT_NFS |
| if (ROOT_DEV == Root_NFS) { |
| printk(KERN_ERR |
| "IP-Config: Retrying forever (NFS root)...\n"); |
| goto try_try_again; |
| } |
| #endif |
| |
| if (--retries) { |
| printk(KERN_ERR |
| "IP-Config: Reopening network devices...\n"); |
| goto try_try_again; |
| } |
| |
| /* Oh, well. At least we tried. */ |
| printk(KERN_ERR "IP-Config: Auto-configuration of network failed.\n"); |
| return -1; |
| } |
| #else /* !DYNAMIC */ |
| printk(KERN_ERR "IP-Config: Incomplete network configuration information.\n"); |
| ic_close_devs(); |
| return -1; |
| #endif /* IPCONFIG_DYNAMIC */ |
| } else { |
| /* Device selected manually or only one device -> use it */ |
| ic_dev = ic_first_dev->dev; |
| } |
| |
| addr = root_nfs_parse_addr(root_server_path); |
| if (root_server_addr == NONE) |
| root_server_addr = addr; |
| |
| /* |
| * Use defaults whereever applicable. |
| */ |
| if (ic_defaults() < 0) |
| return -1; |
| |
| /* |
| * Close all network devices except the device we've |
| * autoconfigured and set up routes. |
| */ |
| ic_close_devs(); |
| if (ic_setup_if() < 0 || ic_setup_routes() < 0) |
| return -1; |
| |
| /* |
| * Record which protocol was actually used. |
| */ |
| #ifdef IPCONFIG_DYNAMIC |
| ic_proto_used = ic_got_reply | (ic_proto_enabled & IC_USE_DHCP); |
| #endif |
| |
| #ifndef IPCONFIG_SILENT |
| /* |
| * Clue in the operator. |
| */ |
| printk("IP-Config: Complete:"); |
| printk("\n device=%s", ic_dev->name); |
| printk(", addr=%u.%u.%u.%u", NIPQUAD(ic_myaddr)); |
| printk(", mask=%u.%u.%u.%u", NIPQUAD(ic_netmask)); |
| printk(", gw=%u.%u.%u.%u", NIPQUAD(ic_gateway)); |
| printk(",\n host=%s, domain=%s, nis-domain=%s", |
| utsname()->nodename, ic_domain, utsname()->domainname); |
| printk(",\n bootserver=%u.%u.%u.%u", NIPQUAD(ic_servaddr)); |
| printk(", rootserver=%u.%u.%u.%u", NIPQUAD(root_server_addr)); |
| printk(", rootpath=%s", root_server_path); |
| printk("\n"); |
| #endif /* !SILENT */ |
| |
| return 0; |
| } |
| |
| late_initcall(ip_auto_config); |
| |
| |
| /* |
| * Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel |
| * command line parameter. It consists of option fields separated by colons in |
| * the following order: |
| * |
| * <client-ip>:<server-ip>:<gw-ip>:<netmask>:<host name>:<device>:<PROTO> |
| * |
| * Any of the fields can be empty which means to use a default value: |
| * <client-ip> - address given by BOOTP or RARP |
| * <server-ip> - address of host returning BOOTP or RARP packet |
| * <gw-ip> - none, or the address returned by BOOTP |
| * <netmask> - automatically determined from <client-ip>, or the |
| * one returned by BOOTP |
| * <host name> - <client-ip> in ASCII notation, or the name returned |
| * by BOOTP |
| * <device> - use all available devices |
| * <PROTO>: |
| * off|none - don't do autoconfig at all (DEFAULT) |
| * on|any - use any configured protocol |
| * dhcp|bootp|rarp - use only the specified protocol |
| * both - use both BOOTP and RARP (not DHCP) |
| */ |
| static int __init ic_proto_name(char *name) |
| { |
| if (!strcmp(name, "on") || !strcmp(name, "any")) { |
| return 1; |
| } |
| #ifdef CONFIG_IP_PNP_DHCP |
| else if (!strcmp(name, "dhcp")) { |
| ic_proto_enabled &= ~IC_RARP; |
| return 1; |
| } |
| #endif |
| #ifdef CONFIG_IP_PNP_BOOTP |
| else if (!strcmp(name, "bootp")) { |
| ic_proto_enabled &= ~(IC_RARP | IC_USE_DHCP); |
| return 1; |
| } |
| #endif |
| #ifdef CONFIG_IP_PNP_RARP |
| else if (!strcmp(name, "rarp")) { |
| ic_proto_enabled &= ~(IC_BOOTP | IC_USE_DHCP); |
| return 1; |
| } |
| #endif |
| #ifdef IPCONFIG_DYNAMIC |
| else if (!strcmp(name, "both")) { |
| ic_proto_enabled &= ~IC_USE_DHCP; /* backward compat :-( */ |
| return 1; |
| } |
| #endif |
| return 0; |
| } |
| |
| static int __init ip_auto_config_setup(char *addrs) |
| { |
| char *cp, *ip, *dp; |
| int num = 0; |
| |
| ic_set_manually = 1; |
| |
| ic_enable = (*addrs && |
| (strcmp(addrs, "off") != 0) && |
| (strcmp(addrs, "none") != 0)); |
| if (!ic_enable) |
| return 1; |
| |
| if (ic_proto_name(addrs)) |
| return 1; |
| |
| /* Parse the whole string */ |
| ip = addrs; |
| while (ip && *ip) { |
| if ((cp = strchr(ip, ':'))) |
| *cp++ = '\0'; |
| if (strlen(ip) > 0) { |
| DBG(("IP-Config: Parameter #%d: `%s'\n", num, ip)); |
| switch (num) { |
| case 0: |
| if ((ic_myaddr = in_aton(ip)) == INADDR_ANY) |
| ic_myaddr = NONE; |
| break; |
| case 1: |
| if ((ic_servaddr = in_aton(ip)) == INADDR_ANY) |
| ic_servaddr = NONE; |
| break; |
| case 2: |
| if ((ic_gateway = in_aton(ip)) == INADDR_ANY) |
| ic_gateway = NONE; |
| break; |
| case 3: |
| if ((ic_netmask = in_aton(ip)) == INADDR_ANY) |
| ic_netmask = NONE; |
| break; |
| case 4: |
| if ((dp = strchr(ip, '.'))) { |
| *dp++ = '\0'; |
| strlcpy(utsname()->domainname, dp, |
| sizeof(utsname()->domainname)); |
| } |
| strlcpy(utsname()->nodename, ip, |
| sizeof(utsname()->nodename)); |
| ic_host_name_set = 1; |
| break; |
| case 5: |
| strlcpy(user_dev_name, ip, sizeof(user_dev_name)); |
| break; |
| case 6: |
| ic_proto_name(ip); |
| break; |
| } |
| } |
| ip = cp; |
| num++; |
| } |
| |
| return 1; |
| } |
| |
| static int __init nfsaddrs_config_setup(char *addrs) |
| { |
| return ip_auto_config_setup(addrs); |
| } |
| |
| __setup("ip=", ip_auto_config_setup); |
| __setup("nfsaddrs=", nfsaddrs_config_setup); |