| /* |
| * Media Bus API header |
| * |
| * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef V4L2_MEDIABUS_H |
| #define V4L2_MEDIABUS_H |
| |
| #include <linux/v4l2-mediabus.h> |
| |
| /* Parallel flags */ |
| /* |
| * Can the client run in master or in slave mode. By "Master mode" an operation |
| * mode is meant, when the client (e.g., a camera sensor) is producing |
| * horizontal and vertical synchronisation. In "Slave mode" the host is |
| * providing these signals to the slave. |
| */ |
| #define V4L2_MBUS_MASTER (1 << 0) |
| #define V4L2_MBUS_SLAVE (1 << 1) |
| /* |
| * Signal polarity flags |
| * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused |
| * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying |
| * configuration of hardware that uses [HV]REF signals |
| */ |
| #define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2) |
| #define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3) |
| #define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4) |
| #define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5) |
| #define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6) |
| #define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7) |
| #define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8) |
| #define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9) |
| /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */ |
| #define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10) |
| /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */ |
| #define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11) |
| /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */ |
| #define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH (1 << 12) |
| #define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW (1 << 13) |
| |
| /* Serial flags */ |
| /* How many lanes the client can use */ |
| #define V4L2_MBUS_CSI2_1_LANE (1 << 0) |
| #define V4L2_MBUS_CSI2_2_LANE (1 << 1) |
| #define V4L2_MBUS_CSI2_3_LANE (1 << 2) |
| #define V4L2_MBUS_CSI2_4_LANE (1 << 3) |
| /* On which channels it can send video data */ |
| #define V4L2_MBUS_CSI2_CHANNEL_0 (1 << 4) |
| #define V4L2_MBUS_CSI2_CHANNEL_1 (1 << 5) |
| #define V4L2_MBUS_CSI2_CHANNEL_2 (1 << 6) |
| #define V4L2_MBUS_CSI2_CHANNEL_3 (1 << 7) |
| /* Does it support only continuous or also non-continuous clock mode */ |
| #define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK (1 << 8) |
| #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK (1 << 9) |
| |
| #define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \ |
| V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) |
| #define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ |
| V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) |
| |
| /** |
| * enum v4l2_mbus_type - media bus type |
| * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync |
| * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can |
| * also be used for BT.1120 |
| * @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface |
| * @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2) |
| * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface |
| */ |
| enum v4l2_mbus_type { |
| V4L2_MBUS_PARALLEL, |
| V4L2_MBUS_BT656, |
| V4L2_MBUS_CSI1, |
| V4L2_MBUS_CCP2, |
| V4L2_MBUS_CSI2, |
| }; |
| |
| /** |
| * struct v4l2_mbus_config - media bus configuration |
| * @type: in: interface type |
| * @flags: in / out: configuration flags, depending on @type |
| */ |
| struct v4l2_mbus_config { |
| enum v4l2_mbus_type type; |
| unsigned int flags; |
| }; |
| |
| static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, |
| const struct v4l2_mbus_framefmt *mbus_fmt) |
| { |
| pix_fmt->width = mbus_fmt->width; |
| pix_fmt->height = mbus_fmt->height; |
| pix_fmt->field = mbus_fmt->field; |
| pix_fmt->colorspace = mbus_fmt->colorspace; |
| pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc; |
| pix_fmt->quantization = mbus_fmt->quantization; |
| pix_fmt->xfer_func = mbus_fmt->xfer_func; |
| } |
| |
| static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt, |
| const struct v4l2_pix_format *pix_fmt, |
| u32 code) |
| { |
| mbus_fmt->width = pix_fmt->width; |
| mbus_fmt->height = pix_fmt->height; |
| mbus_fmt->field = pix_fmt->field; |
| mbus_fmt->colorspace = pix_fmt->colorspace; |
| mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc; |
| mbus_fmt->quantization = pix_fmt->quantization; |
| mbus_fmt->xfer_func = pix_fmt->xfer_func; |
| mbus_fmt->code = code; |
| } |
| |
| static inline void v4l2_fill_pix_format_mplane( |
| struct v4l2_pix_format_mplane *pix_mp_fmt, |
| const struct v4l2_mbus_framefmt *mbus_fmt) |
| { |
| pix_mp_fmt->width = mbus_fmt->width; |
| pix_mp_fmt->height = mbus_fmt->height; |
| pix_mp_fmt->field = mbus_fmt->field; |
| pix_mp_fmt->colorspace = mbus_fmt->colorspace; |
| pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc; |
| pix_mp_fmt->quantization = mbus_fmt->quantization; |
| pix_mp_fmt->xfer_func = mbus_fmt->xfer_func; |
| } |
| |
| static inline void v4l2_fill_mbus_format_mplane( |
| struct v4l2_mbus_framefmt *mbus_fmt, |
| const struct v4l2_pix_format_mplane *pix_mp_fmt) |
| { |
| mbus_fmt->width = pix_mp_fmt->width; |
| mbus_fmt->height = pix_mp_fmt->height; |
| mbus_fmt->field = pix_mp_fmt->field; |
| mbus_fmt->colorspace = pix_mp_fmt->colorspace; |
| mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc; |
| mbus_fmt->quantization = pix_mp_fmt->quantization; |
| mbus_fmt->xfer_func = pix_mp_fmt->xfer_func; |
| } |
| |
| #endif |