| /* |
| * Copyright (c) 2012 Qualcomm Atheros, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/io.h> |
| #include <linux/list.h> |
| #include <linux/etherdevice.h> |
| |
| #include "wil6210.h" |
| #include "wmi.h" |
| |
| /** |
| * WMI event receiving - theory of operations |
| * |
| * When firmware about to report WMI event, it fills memory area |
| * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for |
| * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler. |
| * |
| * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the |
| * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up |
| * and handles events within the @wmi_event_worker. Every event get detached |
| * from list, processed and deleted. |
| * |
| * Purpose for this mechanism is to release IRQ thread; otherwise, |
| * if WMI event handling involves another WMI command flow, this 2-nd flow |
| * won't be completed because of blocked IRQ thread. |
| */ |
| |
| /** |
| * Addressing - theory of operations |
| * |
| * There are several buses present on the WIL6210 card. |
| * Same memory areas are visible at different address on |
| * the different busses. There are 3 main bus masters: |
| * - MAC CPU (ucode) |
| * - User CPU (firmware) |
| * - AHB (host) |
| * |
| * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing |
| * AHB addresses starting from 0x880000 |
| * |
| * Internally, firmware uses addresses that allows faster access but |
| * are invisible from the host. To read from these addresses, alternative |
| * AHB address must be used. |
| * |
| * Memory mapping |
| * Linker address PCI/Host address |
| * 0x880000 .. 0xa80000 2Mb BAR0 |
| * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM |
| * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH |
| */ |
| |
| /** |
| * @fw_mapping provides memory remapping table |
| */ |
| static const struct { |
| u32 from; /* linker address - from, inclusive */ |
| u32 to; /* linker address - to, exclusive */ |
| u32 host; /* PCI/Host address - BAR0 + 0x880000 */ |
| } fw_mapping[] = { |
| {0x000000, 0x040000, 0x8c0000}, /* FW code RAM 256k */ |
| {0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */ |
| {0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */ |
| {0x880000, 0x88a000, 0x880000}, /* various RGF */ |
| {0x8c0000, 0x932000, 0x8c0000}, /* trivial mapping for upper area */ |
| /* |
| * 920000..930000 ucode code RAM |
| * 930000..932000 ucode data RAM |
| */ |
| }; |
| |
| /** |
| * return AHB address for given firmware/ucode internal (linker) address |
| * @x - internal address |
| * If address have no valid AHB mapping, return 0 |
| */ |
| static u32 wmi_addr_remap(u32 x) |
| { |
| uint i; |
| |
| for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) { |
| if ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to)) |
| return x + fw_mapping[i].host - fw_mapping[i].from; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Check address validity for WMI buffer; remap if needed |
| * @ptr - internal (linker) fw/ucode address |
| * |
| * Valid buffer should be DWORD aligned |
| * |
| * return address for accessing buffer from the host; |
| * if buffer is not valid, return NULL. |
| */ |
| void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_) |
| { |
| u32 off; |
| u32 ptr = le32_to_cpu(ptr_); |
| |
| if (ptr % 4) |
| return NULL; |
| |
| ptr = wmi_addr_remap(ptr); |
| if (ptr < WIL6210_FW_HOST_OFF) |
| return NULL; |
| |
| off = HOSTADDR(ptr); |
| if (off > WIL6210_MEM_SIZE - 4) |
| return NULL; |
| |
| return wil->csr + off; |
| } |
| |
| /** |
| * Check address validity |
| */ |
| void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr) |
| { |
| u32 off; |
| |
| if (ptr % 4) |
| return NULL; |
| |
| if (ptr < WIL6210_FW_HOST_OFF) |
| return NULL; |
| |
| off = HOSTADDR(ptr); |
| if (off > WIL6210_MEM_SIZE - 4) |
| return NULL; |
| |
| return wil->csr + off; |
| } |
| |
| int wmi_read_hdr(struct wil6210_priv *wil, __le32 ptr, |
| struct wil6210_mbox_hdr *hdr) |
| { |
| void __iomem *src = wmi_buffer(wil, ptr); |
| if (!src) |
| return -EINVAL; |
| |
| wil_memcpy_fromio_32(hdr, src, sizeof(*hdr)); |
| |
| return 0; |
| } |
| |
| static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) |
| { |
| struct { |
| struct wil6210_mbox_hdr hdr; |
| struct wil6210_mbox_hdr_wmi wmi; |
| } __packed cmd = { |
| .hdr = { |
| .type = WIL_MBOX_HDR_TYPE_WMI, |
| .flags = 0, |
| .len = cpu_to_le16(sizeof(cmd.wmi) + len), |
| }, |
| .wmi = { |
| .id = cpu_to_le16(cmdid), |
| .info1 = 0, |
| }, |
| }; |
| struct wil6210_mbox_ring *r = &wil->mbox_ctl.tx; |
| struct wil6210_mbox_ring_desc d_head; |
| u32 next_head; |
| void __iomem *dst; |
| void __iomem *head = wmi_addr(wil, r->head); |
| uint retry; |
| |
| if (sizeof(cmd) + len > r->entry_size) { |
| wil_err(wil, "WMI size too large: %d bytes, max is %d\n", |
| (int)(sizeof(cmd) + len), r->entry_size); |
| return -ERANGE; |
| |
| } |
| |
| might_sleep(); |
| |
| if (!test_bit(wil_status_fwready, &wil->status)) { |
| wil_err(wil, "FW not ready\n"); |
| return -EAGAIN; |
| } |
| |
| if (!head) { |
| wil_err(wil, "WMI head is garbage: 0x%08x\n", r->head); |
| return -EINVAL; |
| } |
| /* read Tx head till it is not busy */ |
| for (retry = 5; retry > 0; retry--) { |
| wil_memcpy_fromio_32(&d_head, head, sizeof(d_head)); |
| if (d_head.sync == 0) |
| break; |
| msleep(20); |
| } |
| if (d_head.sync != 0) { |
| wil_err(wil, "WMI head busy\n"); |
| return -EBUSY; |
| } |
| /* next head */ |
| next_head = r->base + ((r->head - r->base + sizeof(d_head)) % r->size); |
| wil_dbg_WMI(wil, "Head 0x%08x -> 0x%08x\n", r->head, next_head); |
| /* wait till FW finish with previous command */ |
| for (retry = 5; retry > 0; retry--) { |
| r->tail = ioread32(wil->csr + HOST_MBOX + |
| offsetof(struct wil6210_mbox_ctl, tx.tail)); |
| if (next_head != r->tail) |
| break; |
| msleep(20); |
| } |
| if (next_head == r->tail) { |
| wil_err(wil, "WMI ring full\n"); |
| return -EBUSY; |
| } |
| dst = wmi_buffer(wil, d_head.addr); |
| if (!dst) { |
| wil_err(wil, "invalid WMI buffer: 0x%08x\n", |
| le32_to_cpu(d_head.addr)); |
| return -EINVAL; |
| } |
| cmd.hdr.seq = cpu_to_le16(++wil->wmi_seq); |
| /* set command */ |
| wil_dbg_WMI(wil, "WMI command 0x%04x [%d]\n", cmdid, len); |
| wil_hex_dump_WMI("Cmd ", DUMP_PREFIX_OFFSET, 16, 1, &cmd, |
| sizeof(cmd), true); |
| wil_hex_dump_WMI("cmd ", DUMP_PREFIX_OFFSET, 16, 1, buf, |
| len, true); |
| wil_memcpy_toio_32(dst, &cmd, sizeof(cmd)); |
| wil_memcpy_toio_32(dst + sizeof(cmd), buf, len); |
| /* mark entry as full */ |
| iowrite32(1, wil->csr + HOSTADDR(r->head) + |
| offsetof(struct wil6210_mbox_ring_desc, sync)); |
| /* advance next ptr */ |
| iowrite32(r->head = next_head, wil->csr + HOST_MBOX + |
| offsetof(struct wil6210_mbox_ctl, tx.head)); |
| |
| /* interrupt to FW */ |
| iowrite32(SW_INT_MBOX, wil->csr + HOST_SW_INT); |
| |
| return 0; |
| } |
| |
| int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) |
| { |
| int rc; |
| |
| mutex_lock(&wil->wmi_mutex); |
| rc = __wmi_send(wil, cmdid, buf, len); |
| mutex_unlock(&wil->wmi_mutex); |
| |
| return rc; |
| } |
| |
| /*=== Event handlers ===*/ |
| static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct net_device *ndev = wil_to_ndev(wil); |
| struct wireless_dev *wdev = wil->wdev; |
| struct wmi_ready_event *evt = d; |
| u32 ver = le32_to_cpu(evt->sw_version); |
| |
| wil_dbg_WMI(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac); |
| |
| if (!is_valid_ether_addr(ndev->dev_addr)) { |
| memcpy(ndev->dev_addr, evt->mac, ETH_ALEN); |
| memcpy(ndev->perm_addr, evt->mac, ETH_ALEN); |
| } |
| snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version), |
| "%d", ver); |
| } |
| |
| static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d, |
| int len) |
| { |
| wil_dbg_WMI(wil, "WMI: FW ready\n"); |
| |
| set_bit(wil_status_fwready, &wil->status); |
| /* reuse wmi_ready for the firmware ready indication */ |
| complete(&wil->wmi_ready); |
| } |
| |
| static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct wmi_rx_mgmt_packet_event *data = d; |
| struct wiphy *wiphy = wil_to_wiphy(wil); |
| struct ieee80211_mgmt *rx_mgmt_frame = |
| (struct ieee80211_mgmt *)data->payload; |
| int ch_no = data->info.channel+1; |
| u32 freq = ieee80211_channel_to_frequency(ch_no, |
| IEEE80211_BAND_60GHZ); |
| struct ieee80211_channel *channel = ieee80211_get_channel(wiphy, freq); |
| /* TODO convert LE to CPU */ |
| s32 signal = 0; /* TODO */ |
| __le16 fc = rx_mgmt_frame->frame_control; |
| u32 d_len = le32_to_cpu(data->info.len); |
| u16 d_status = le16_to_cpu(data->info.status); |
| |
| wil_dbg_WMI(wil, "MGMT: channel %d MCS %d SNR %d\n", |
| data->info.channel, data->info.mcs, data->info.snr); |
| wil_dbg_WMI(wil, "status 0x%04x len %d stype %04x\n", d_status, d_len, |
| le16_to_cpu(data->info.stype)); |
| wil_dbg_WMI(wil, "qid %d mid %d cid %d\n", |
| data->info.qid, data->info.mid, data->info.cid); |
| |
| if (!channel) { |
| wil_err(wil, "Frame on unsupported channel\n"); |
| return; |
| } |
| |
| if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) { |
| struct cfg80211_bss *bss; |
| u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp); |
| u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info); |
| u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int); |
| const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable; |
| size_t ie_len = d_len - offsetof(struct ieee80211_mgmt, |
| u.beacon.variable); |
| wil_dbg_WMI(wil, "Capability info : 0x%04x\n", cap); |
| |
| bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid, |
| tsf, cap, bi, ie_buf, ie_len, |
| signal, GFP_KERNEL); |
| if (bss) { |
| wil_dbg_WMI(wil, "Added BSS %pM\n", |
| rx_mgmt_frame->bssid); |
| cfg80211_put_bss(bss); |
| } else { |
| wil_err(wil, "cfg80211_inform_bss() failed\n"); |
| } |
| } |
| } |
| |
| static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| if (wil->scan_request) { |
| struct wmi_scan_complete_event *data = d; |
| bool aborted = (data->status != 0); |
| |
| wil_dbg_WMI(wil, "SCAN_COMPLETE(0x%08x)\n", data->status); |
| cfg80211_scan_done(wil->scan_request, aborted); |
| wil->scan_request = NULL; |
| } else { |
| wil_err(wil, "SCAN_COMPLETE while not scanning\n"); |
| } |
| } |
| |
| static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct net_device *ndev = wil_to_ndev(wil); |
| struct wireless_dev *wdev = wil->wdev; |
| struct wmi_connect_event *evt = d; |
| int ch; /* channel number */ |
| struct station_info sinfo; |
| u8 *assoc_req_ie, *assoc_resp_ie; |
| size_t assoc_req_ielen, assoc_resp_ielen; |
| /* capinfo(u16) + listen_interval(u16) + IEs */ |
| const size_t assoc_req_ie_offset = sizeof(u16) * 2; |
| /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */ |
| const size_t assoc_resp_ie_offset = sizeof(u16) * 3; |
| |
| if (len < sizeof(*evt)) { |
| wil_err(wil, "Connect event too short : %d bytes\n", len); |
| return; |
| } |
| if (len != sizeof(*evt) + evt->beacon_ie_len + evt->assoc_req_len + |
| evt->assoc_resp_len) { |
| wil_err(wil, |
| "Connect event corrupted : %d != %d + %d + %d + %d\n", |
| len, (int)sizeof(*evt), evt->beacon_ie_len, |
| evt->assoc_req_len, evt->assoc_resp_len); |
| return; |
| } |
| ch = evt->channel + 1; |
| wil_dbg_WMI(wil, "Connect %pM channel [%d] cid %d\n", |
| evt->bssid, ch, evt->cid); |
| wil_hex_dump_WMI("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1, |
| evt->assoc_info, len - sizeof(*evt), true); |
| |
| /* figure out IE's */ |
| assoc_req_ie = &evt->assoc_info[evt->beacon_ie_len + |
| assoc_req_ie_offset]; |
| assoc_req_ielen = evt->assoc_req_len - assoc_req_ie_offset; |
| if (evt->assoc_req_len <= assoc_req_ie_offset) { |
| assoc_req_ie = NULL; |
| assoc_req_ielen = 0; |
| } |
| |
| assoc_resp_ie = &evt->assoc_info[evt->beacon_ie_len + |
| evt->assoc_req_len + |
| assoc_resp_ie_offset]; |
| assoc_resp_ielen = evt->assoc_resp_len - assoc_resp_ie_offset; |
| if (evt->assoc_resp_len <= assoc_resp_ie_offset) { |
| assoc_resp_ie = NULL; |
| assoc_resp_ielen = 0; |
| } |
| |
| if ((wdev->iftype == NL80211_IFTYPE_STATION) || |
| (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) { |
| if (wdev->sme_state != CFG80211_SME_CONNECTING) { |
| wil_err(wil, "Not in connecting state\n"); |
| return; |
| } |
| del_timer_sync(&wil->connect_timer); |
| cfg80211_connect_result(ndev, evt->bssid, |
| assoc_req_ie, assoc_req_ielen, |
| assoc_resp_ie, assoc_resp_ielen, |
| WLAN_STATUS_SUCCESS, GFP_KERNEL); |
| |
| } else if ((wdev->iftype == NL80211_IFTYPE_AP) || |
| (wdev->iftype == NL80211_IFTYPE_P2P_GO)) { |
| memset(&sinfo, 0, sizeof(sinfo)); |
| |
| sinfo.generation = wil->sinfo_gen++; |
| |
| if (assoc_req_ie) { |
| sinfo.assoc_req_ies = assoc_req_ie; |
| sinfo.assoc_req_ies_len = assoc_req_ielen; |
| sinfo.filled |= STATION_INFO_ASSOC_REQ_IES; |
| } |
| |
| cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL); |
| } |
| set_bit(wil_status_fwconnected, &wil->status); |
| |
| /* FIXME FW can transmit only ucast frames to peer */ |
| /* FIXME real ring_id instead of hard coded 0 */ |
| memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN); |
| |
| wil->pending_connect_cid = evt->cid; |
| queue_work(wil->wmi_wq_conn, &wil->wmi_connect_worker); |
| } |
| |
| static void wmi_evt_disconnect(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| struct wmi_disconnect_event *evt = d; |
| |
| wil_dbg_WMI(wil, "Disconnect %pM reason %d proto %d wmi\n", |
| evt->bssid, |
| evt->protocol_reason_status, evt->disconnect_reason); |
| |
| wil->sinfo_gen++; |
| |
| wil6210_disconnect(wil, evt->bssid); |
| clear_bit(wil_status_dontscan, &wil->status); |
| } |
| |
| static void wmi_evt_notify(struct wil6210_priv *wil, int id, void *d, int len) |
| { |
| struct wmi_notify_req_done_event *evt = d; |
| |
| if (len < sizeof(*evt)) { |
| wil_err(wil, "Short NOTIFY event\n"); |
| return; |
| } |
| |
| wil->stats.tsf = le64_to_cpu(evt->tsf); |
| wil->stats.snr = le32_to_cpu(evt->snr_val); |
| wil->stats.bf_mcs = le16_to_cpu(evt->bf_mcs); |
| wil->stats.my_rx_sector = le16_to_cpu(evt->my_rx_sector); |
| wil->stats.my_tx_sector = le16_to_cpu(evt->my_tx_sector); |
| wil->stats.peer_rx_sector = le16_to_cpu(evt->other_rx_sector); |
| wil->stats.peer_tx_sector = le16_to_cpu(evt->other_tx_sector); |
| wil_dbg_WMI(wil, "Link status, MCS %d TSF 0x%016llx\n" |
| "BF status 0x%08x SNR 0x%08x\n" |
| "Tx Tpt %d goodput %d Rx goodput %d\n" |
| "Sectors(rx:tx) my %d:%d peer %d:%d\n", |
| wil->stats.bf_mcs, wil->stats.tsf, evt->status, |
| wil->stats.snr, le32_to_cpu(evt->tx_tpt), |
| le32_to_cpu(evt->tx_goodput), le32_to_cpu(evt->rx_goodput), |
| wil->stats.my_rx_sector, wil->stats.my_tx_sector, |
| wil->stats.peer_rx_sector, wil->stats.peer_tx_sector); |
| } |
| |
| /* |
| * Firmware reports EAPOL frame using WME event. |
| * Reconstruct Ethernet frame and deliver it via normal Rx |
| */ |
| static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| struct net_device *ndev = wil_to_ndev(wil); |
| struct wmi_eapol_rx_event *evt = d; |
| u16 eapol_len = le16_to_cpu(evt->eapol_len); |
| int sz = eapol_len + ETH_HLEN; |
| struct sk_buff *skb; |
| struct ethhdr *eth; |
| |
| wil_dbg_WMI(wil, "EAPOL len %d from %pM\n", eapol_len, |
| evt->src_mac); |
| |
| if (eapol_len > 196) { /* TODO: revisit size limit */ |
| wil_err(wil, "EAPOL too large\n"); |
| return; |
| } |
| |
| skb = alloc_skb(sz, GFP_KERNEL); |
| if (!skb) { |
| wil_err(wil, "Failed to allocate skb\n"); |
| return; |
| } |
| eth = (struct ethhdr *)skb_put(skb, ETH_HLEN); |
| memcpy(eth->h_dest, ndev->dev_addr, ETH_ALEN); |
| memcpy(eth->h_source, evt->src_mac, ETH_ALEN); |
| eth->h_proto = cpu_to_be16(ETH_P_PAE); |
| memcpy(skb_put(skb, eapol_len), evt->eapol, eapol_len); |
| skb->protocol = eth_type_trans(skb, ndev); |
| if (likely(netif_rx_ni(skb) == NET_RX_SUCCESS)) { |
| ndev->stats.rx_packets++; |
| ndev->stats.rx_bytes += skb->len; |
| } else { |
| ndev->stats.rx_dropped++; |
| } |
| } |
| |
| static const struct { |
| int eventid; |
| void (*handler)(struct wil6210_priv *wil, int eventid, |
| void *data, int data_len); |
| } wmi_evt_handlers[] = { |
| {WMI_READY_EVENTID, wmi_evt_ready}, |
| {WMI_FW_READY_EVENTID, wmi_evt_fw_ready}, |
| {WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt}, |
| {WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete}, |
| {WMI_CONNECT_EVENTID, wmi_evt_connect}, |
| {WMI_DISCONNECT_EVENTID, wmi_evt_disconnect}, |
| {WMI_NOTIFY_REQ_DONE_EVENTID, wmi_evt_notify}, |
| {WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx}, |
| }; |
| |
| /* |
| * Run in IRQ context |
| * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev |
| * that will be eventually handled by the @wmi_event_worker in the thread |
| * context of thread "wil6210_wmi" |
| */ |
| void wmi_recv_cmd(struct wil6210_priv *wil) |
| { |
| struct wil6210_mbox_ring_desc d_tail; |
| struct wil6210_mbox_hdr hdr; |
| struct wil6210_mbox_ring *r = &wil->mbox_ctl.rx; |
| struct pending_wmi_event *evt; |
| u8 *cmd; |
| void __iomem *src; |
| ulong flags; |
| |
| for (;;) { |
| u16 len; |
| |
| r->head = ioread32(wil->csr + HOST_MBOX + |
| offsetof(struct wil6210_mbox_ctl, rx.head)); |
| if (r->tail == r->head) |
| return; |
| |
| /* read cmd from tail */ |
| wil_memcpy_fromio_32(&d_tail, wil->csr + HOSTADDR(r->tail), |
| sizeof(struct wil6210_mbox_ring_desc)); |
| if (d_tail.sync == 0) { |
| wil_err(wil, "Mbox evt not owned by FW?\n"); |
| return; |
| } |
| |
| if (0 != wmi_read_hdr(wil, d_tail.addr, &hdr)) { |
| wil_err(wil, "Mbox evt at 0x%08x?\n", |
| le32_to_cpu(d_tail.addr)); |
| return; |
| } |
| |
| len = le16_to_cpu(hdr.len); |
| src = wmi_buffer(wil, d_tail.addr) + |
| sizeof(struct wil6210_mbox_hdr); |
| evt = kmalloc(ALIGN(offsetof(struct pending_wmi_event, |
| event.wmi) + len, 4), |
| GFP_KERNEL); |
| if (!evt) { |
| wil_err(wil, "kmalloc for WMI event (%d) failed\n", |
| len); |
| return; |
| } |
| evt->event.hdr = hdr; |
| cmd = (void *)&evt->event.wmi; |
| wil_memcpy_fromio_32(cmd, src, len); |
| /* mark entry as empty */ |
| iowrite32(0, wil->csr + HOSTADDR(r->tail) + |
| offsetof(struct wil6210_mbox_ring_desc, sync)); |
| /* indicate */ |
| wil_dbg_WMI(wil, "Mbox evt %04x %04x %04x %02x\n", |
| le16_to_cpu(hdr.seq), len, le16_to_cpu(hdr.type), |
| hdr.flags); |
| if ((hdr.type == WIL_MBOX_HDR_TYPE_WMI) && |
| (len >= sizeof(struct wil6210_mbox_hdr_wmi))) { |
| wil_dbg_WMI(wil, "WMI event 0x%04x\n", |
| evt->event.wmi.id); |
| } |
| wil_hex_dump_WMI("evt ", DUMP_PREFIX_OFFSET, 16, 1, |
| &evt->event.hdr, sizeof(hdr) + len, true); |
| |
| /* advance tail */ |
| r->tail = r->base + ((r->tail - r->base + |
| sizeof(struct wil6210_mbox_ring_desc)) % r->size); |
| iowrite32(r->tail, wil->csr + HOST_MBOX + |
| offsetof(struct wil6210_mbox_ctl, rx.tail)); |
| |
| /* add to the pending list */ |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| list_add_tail(&evt->list, &wil->pending_wmi_ev); |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| { |
| int q = queue_work(wil->wmi_wq, |
| &wil->wmi_event_worker); |
| wil_dbg_WMI(wil, "queue_work -> %d\n", q); |
| } |
| } |
| } |
| |
| int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len, |
| u16 reply_id, void *reply, u8 reply_size, int to_msec) |
| { |
| int rc; |
| int remain; |
| |
| mutex_lock(&wil->wmi_mutex); |
| |
| rc = __wmi_send(wil, cmdid, buf, len); |
| if (rc) |
| goto out; |
| |
| wil->reply_id = reply_id; |
| wil->reply_buf = reply; |
| wil->reply_size = reply_size; |
| remain = wait_for_completion_timeout(&wil->wmi_ready, |
| msecs_to_jiffies(to_msec)); |
| if (0 == remain) { |
| wil_err(wil, "wmi_call(0x%04x->0x%04x) timeout %d msec\n", |
| cmdid, reply_id, to_msec); |
| rc = -ETIME; |
| } else { |
| wil_dbg_WMI(wil, |
| "wmi_call(0x%04x->0x%04x) completed in %d msec\n", |
| cmdid, reply_id, |
| to_msec - jiffies_to_msecs(remain)); |
| } |
| wil->reply_id = 0; |
| wil->reply_buf = NULL; |
| wil->reply_size = 0; |
| out: |
| mutex_unlock(&wil->wmi_mutex); |
| |
| return rc; |
| } |
| |
| int wmi_echo(struct wil6210_priv *wil) |
| { |
| struct wmi_echo_cmd cmd = { |
| .value = cpu_to_le32(0x12345678), |
| }; |
| |
| return wmi_call(wil, WMI_ECHO_CMDID, &cmd, sizeof(cmd), |
| WMI_ECHO_RSP_EVENTID, NULL, 0, 20); |
| } |
| |
| int wmi_set_mac_address(struct wil6210_priv *wil, void *addr) |
| { |
| struct wmi_set_mac_address_cmd cmd; |
| |
| memcpy(cmd.mac, addr, ETH_ALEN); |
| |
| wil_dbg_WMI(wil, "Set MAC %pM\n", addr); |
| |
| return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype) |
| { |
| struct wmi_bcon_ctrl_cmd cmd = { |
| .bcon_interval = cpu_to_le16(bi), |
| .network_type = wmi_nettype, |
| .disable_sec_offload = 1, |
| }; |
| |
| if (!wil->secure_pcp) |
| cmd.disable_sec = 1; |
| |
| return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid) |
| { |
| struct wmi_set_ssid_cmd cmd = { |
| .ssid_len = cpu_to_le32(ssid_len), |
| }; |
| |
| if (ssid_len > sizeof(cmd.ssid)) |
| return -EINVAL; |
| |
| memcpy(cmd.ssid, ssid, ssid_len); |
| |
| return wmi_send(wil, WMI_SET_SSID_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_get_ssid(struct wil6210_priv *wil, u8 *ssid_len, void *ssid) |
| { |
| int rc; |
| struct { |
| struct wil6210_mbox_hdr_wmi wmi; |
| struct wmi_set_ssid_cmd cmd; |
| } __packed reply; |
| int len; /* reply.cmd.ssid_len in CPU order */ |
| |
| rc = wmi_call(wil, WMI_GET_SSID_CMDID, NULL, 0, WMI_GET_SSID_EVENTID, |
| &reply, sizeof(reply), 20); |
| if (rc) |
| return rc; |
| |
| len = le32_to_cpu(reply.cmd.ssid_len); |
| if (len > sizeof(reply.cmd.ssid)) |
| return -EINVAL; |
| |
| *ssid_len = len; |
| memcpy(ssid, reply.cmd.ssid, len); |
| |
| return 0; |
| } |
| |
| int wmi_set_channel(struct wil6210_priv *wil, int channel) |
| { |
| struct wmi_set_pcp_channel_cmd cmd = { |
| .channel = channel - 1, |
| }; |
| |
| return wmi_send(wil, WMI_SET_PCP_CHANNEL_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_get_channel(struct wil6210_priv *wil, int *channel) |
| { |
| int rc; |
| struct { |
| struct wil6210_mbox_hdr_wmi wmi; |
| struct wmi_set_pcp_channel_cmd cmd; |
| } __packed reply; |
| |
| rc = wmi_call(wil, WMI_GET_PCP_CHANNEL_CMDID, NULL, 0, |
| WMI_GET_PCP_CHANNEL_EVENTID, &reply, sizeof(reply), 20); |
| if (rc) |
| return rc; |
| |
| if (reply.cmd.channel > 3) |
| return -EINVAL; |
| |
| *channel = reply.cmd.channel + 1; |
| |
| return 0; |
| } |
| |
| int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb) |
| { |
| struct wmi_eapol_tx_cmd *cmd; |
| struct ethhdr *eth; |
| u16 eapol_len = skb->len - ETH_HLEN; |
| void *eapol = skb->data + ETH_HLEN; |
| uint i; |
| int rc; |
| |
| skb_set_mac_header(skb, 0); |
| eth = eth_hdr(skb); |
| wil_dbg_WMI(wil, "EAPOL %d bytes to %pM\n", eapol_len, eth->h_dest); |
| for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++) { |
| if (memcmp(wil->dst_addr[i], eth->h_dest, ETH_ALEN) == 0) |
| goto found_dest; |
| } |
| |
| return -EINVAL; |
| |
| found_dest: |
| /* find out eapol data & len */ |
| cmd = kzalloc(sizeof(*cmd) + eapol_len, GFP_KERNEL); |
| if (!cmd) |
| return -EINVAL; |
| |
| memcpy(cmd->dst_mac, eth->h_dest, ETH_ALEN); |
| cmd->eapol_len = cpu_to_le16(eapol_len); |
| memcpy(cmd->eapol, eapol, eapol_len); |
| rc = wmi_send(wil, WMI_EAPOL_TX_CMDID, cmd, sizeof(*cmd) + eapol_len); |
| kfree(cmd); |
| |
| return rc; |
| } |
| |
| int wmi_del_cipher_key(struct wil6210_priv *wil, u8 key_index, |
| const void *mac_addr) |
| { |
| struct wmi_delete_cipher_key_cmd cmd = { |
| .key_index = key_index, |
| }; |
| |
| if (mac_addr) |
| memcpy(cmd.mac, mac_addr, WMI_MAC_LEN); |
| |
| return wmi_send(wil, WMI_DELETE_CIPHER_KEY_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index, |
| const void *mac_addr, int key_len, const void *key) |
| { |
| struct wmi_add_cipher_key_cmd cmd = { |
| .key_index = key_index, |
| .key_usage = WMI_KEY_USE_PAIRWISE, |
| .key_len = key_len, |
| }; |
| |
| if (!key || (key_len > sizeof(cmd.key))) |
| return -EINVAL; |
| |
| memcpy(cmd.key, key, key_len); |
| if (mac_addr) |
| memcpy(cmd.mac, mac_addr, WMI_MAC_LEN); |
| |
| return wmi_send(wil, WMI_ADD_CIPHER_KEY_CMDID, &cmd, sizeof(cmd)); |
| } |
| |
| int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie) |
| { |
| int rc; |
| u16 len = sizeof(struct wmi_set_appie_cmd) + ie_len; |
| struct wmi_set_appie_cmd *cmd = kzalloc(len, GFP_KERNEL); |
| if (!cmd) { |
| wil_err(wil, "kmalloc(%d) failed\n", len); |
| return -ENOMEM; |
| } |
| |
| cmd->mgmt_frm_type = type; |
| /* BUG: FW API define ieLen as u8. Will fix FW */ |
| cmd->ie_len = cpu_to_le16(ie_len); |
| memcpy(cmd->ie_info, ie, ie_len); |
| rc = wmi_send(wil, WMI_SET_APPIE_CMDID, &cmd, len); |
| kfree(cmd); |
| |
| return rc; |
| } |
| |
| void wmi_event_flush(struct wil6210_priv *wil) |
| { |
| struct pending_wmi_event *evt, *t; |
| |
| wil_dbg_WMI(wil, "%s()\n", __func__); |
| |
| list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) { |
| list_del(&evt->list); |
| kfree(evt); |
| } |
| } |
| |
| static bool wmi_evt_call_handler(struct wil6210_priv *wil, int id, |
| void *d, int len) |
| { |
| uint i; |
| |
| for (i = 0; i < ARRAY_SIZE(wmi_evt_handlers); i++) { |
| if (wmi_evt_handlers[i].eventid == id) { |
| wmi_evt_handlers[i].handler(wil, id, d, len); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static void wmi_event_handle(struct wil6210_priv *wil, |
| struct wil6210_mbox_hdr *hdr) |
| { |
| u16 len = le16_to_cpu(hdr->len); |
| |
| if ((hdr->type == WIL_MBOX_HDR_TYPE_WMI) && |
| (len >= sizeof(struct wil6210_mbox_hdr_wmi))) { |
| struct wil6210_mbox_hdr_wmi *wmi = (void *)(&hdr[1]); |
| void *evt_data = (void *)(&wmi[1]); |
| u16 id = le16_to_cpu(wmi->id); |
| /* check if someone waits for this event */ |
| if (wil->reply_id && wil->reply_id == id) { |
| if (wil->reply_buf) { |
| memcpy(wil->reply_buf, wmi, |
| min(len, wil->reply_size)); |
| } else { |
| wmi_evt_call_handler(wil, id, evt_data, |
| len - sizeof(*wmi)); |
| } |
| wil_dbg_WMI(wil, "Complete WMI 0x%04x\n", id); |
| complete(&wil->wmi_ready); |
| return; |
| } |
| /* unsolicited event */ |
| /* search for handler */ |
| if (!wmi_evt_call_handler(wil, id, evt_data, |
| len - sizeof(*wmi))) { |
| wil_err(wil, "Unhandled event 0x%04x\n", id); |
| } |
| } else { |
| wil_err(wil, "Unknown event type\n"); |
| print_hex_dump(KERN_ERR, "evt?? ", DUMP_PREFIX_OFFSET, 16, 1, |
| hdr, sizeof(*hdr) + len, true); |
| } |
| } |
| |
| /* |
| * Retrieve next WMI event from the pending list |
| */ |
| static struct list_head *next_wmi_ev(struct wil6210_priv *wil) |
| { |
| ulong flags; |
| struct list_head *ret = NULL; |
| |
| spin_lock_irqsave(&wil->wmi_ev_lock, flags); |
| |
| if (!list_empty(&wil->pending_wmi_ev)) { |
| ret = wil->pending_wmi_ev.next; |
| list_del(ret); |
| } |
| |
| spin_unlock_irqrestore(&wil->wmi_ev_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Handler for the WMI events |
| */ |
| void wmi_event_worker(struct work_struct *work) |
| { |
| struct wil6210_priv *wil = container_of(work, struct wil6210_priv, |
| wmi_event_worker); |
| struct pending_wmi_event *evt; |
| struct list_head *lh; |
| |
| while ((lh = next_wmi_ev(wil)) != NULL) { |
| evt = list_entry(lh, struct pending_wmi_event, list); |
| wmi_event_handle(wil, &evt->event.hdr); |
| kfree(evt); |
| } |
| } |
| |
| void wmi_connect_worker(struct work_struct *work) |
| { |
| int rc; |
| struct wil6210_priv *wil = container_of(work, struct wil6210_priv, |
| wmi_connect_worker); |
| |
| if (wil->pending_connect_cid < 0) { |
| wil_err(wil, "No connection pending\n"); |
| return; |
| } |
| |
| wil_dbg_WMI(wil, "Configure for connection CID %d\n", |
| wil->pending_connect_cid); |
| |
| rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, |
| wil->pending_connect_cid, 0); |
| wil->pending_connect_cid = -1; |
| if (rc == 0) |
| wil_link_on(wil); |
| } |