| /* |
| * copyright (c) 2013 Freescale Semiconductor, Inc. |
| * Freescale IMX AHCI SATA platform driver |
| * |
| * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/ahci_platform.h> |
| #include <linux/of_device.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> |
| #include <linux/libata.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/thermal.h> |
| #include "ahci.h" |
| |
| #define DRV_NAME "ahci-imx" |
| |
| enum { |
| /* Timer 1-ms Register */ |
| IMX_TIMER1MS = 0x00e0, |
| /* Port0 PHY Control Register */ |
| IMX_P0PHYCR = 0x0178, |
| IMX_P0PHYCR_TEST_PDDQ = 1 << 20, |
| IMX_P0PHYCR_CR_READ = 1 << 19, |
| IMX_P0PHYCR_CR_WRITE = 1 << 18, |
| IMX_P0PHYCR_CR_CAP_DATA = 1 << 17, |
| IMX_P0PHYCR_CR_CAP_ADDR = 1 << 16, |
| /* Port0 PHY Status Register */ |
| IMX_P0PHYSR = 0x017c, |
| IMX_P0PHYSR_CR_ACK = 1 << 18, |
| IMX_P0PHYSR_CR_DATA_OUT = 0xffff << 0, |
| /* Lane0 Output Status Register */ |
| IMX_LANE0_OUT_STAT = 0x2003, |
| IMX_LANE0_OUT_STAT_RX_PLL_STATE = 1 << 1, |
| /* Clock Reset Register */ |
| IMX_CLOCK_RESET = 0x7f3f, |
| IMX_CLOCK_RESET_RESET = 1 << 0, |
| }; |
| |
| enum ahci_imx_type { |
| AHCI_IMX53, |
| AHCI_IMX6Q, |
| }; |
| |
| struct imx_ahci_priv { |
| struct platform_device *ahci_pdev; |
| enum ahci_imx_type type; |
| struct clk *sata_clk; |
| struct clk *sata_ref_clk; |
| struct clk *ahb_clk; |
| struct regmap *gpr; |
| bool no_device; |
| bool first_time; |
| u32 phy_params; |
| }; |
| |
| static int ahci_imx_hotplug; |
| module_param_named(hotplug, ahci_imx_hotplug, int, 0644); |
| MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)"); |
| |
| static void ahci_imx_host_stop(struct ata_host *host); |
| |
| static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert) |
| { |
| int timeout = 10; |
| u32 crval; |
| u32 srval; |
| |
| /* Assert or deassert the bit */ |
| crval = readl(mmio + IMX_P0PHYCR); |
| if (assert) |
| crval |= bit; |
| else |
| crval &= ~bit; |
| writel(crval, mmio + IMX_P0PHYCR); |
| |
| /* Wait for the cr_ack signal */ |
| do { |
| srval = readl(mmio + IMX_P0PHYSR); |
| if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK) |
| break; |
| usleep_range(100, 200); |
| } while (--timeout); |
| |
| return timeout ? 0 : -ETIMEDOUT; |
| } |
| |
| static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio) |
| { |
| u32 crval = addr; |
| int ret; |
| |
| /* Supply the address on cr_data_in */ |
| writel(crval, mmio + IMX_P0PHYCR); |
| |
| /* Assert the cr_cap_addr signal */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true); |
| if (ret) |
| return ret; |
| |
| /* Deassert cr_cap_addr */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int imx_phy_reg_write(u16 val, void __iomem *mmio) |
| { |
| u32 crval = val; |
| int ret; |
| |
| /* Supply the data on cr_data_in */ |
| writel(crval, mmio + IMX_P0PHYCR); |
| |
| /* Assert the cr_cap_data signal */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true); |
| if (ret) |
| return ret; |
| |
| /* Deassert cr_cap_data */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false); |
| if (ret) |
| return ret; |
| |
| if (val & IMX_CLOCK_RESET_RESET) { |
| /* |
| * In case we're resetting the phy, it's unable to acknowledge, |
| * so we return immediately here. |
| */ |
| crval |= IMX_P0PHYCR_CR_WRITE; |
| writel(crval, mmio + IMX_P0PHYCR); |
| goto out; |
| } |
| |
| /* Assert the cr_write signal */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true); |
| if (ret) |
| return ret; |
| |
| /* Deassert cr_write */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false); |
| if (ret) |
| return ret; |
| |
| out: |
| return 0; |
| } |
| |
| static int imx_phy_reg_read(u16 *val, void __iomem *mmio) |
| { |
| int ret; |
| |
| /* Assert the cr_read signal */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true); |
| if (ret) |
| return ret; |
| |
| /* Capture the data from cr_data_out[] */ |
| *val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT; |
| |
| /* Deassert cr_read */ |
| ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int imx_sata_phy_reset(struct ahci_host_priv *hpriv) |
| { |
| void __iomem *mmio = hpriv->mmio; |
| int timeout = 10; |
| u16 val; |
| int ret; |
| |
| /* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */ |
| ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio); |
| if (ret) |
| return ret; |
| ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio); |
| if (ret) |
| return ret; |
| |
| /* Wait for PHY RX_PLL to be stable */ |
| do { |
| usleep_range(100, 200); |
| ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio); |
| if (ret) |
| return ret; |
| ret = imx_phy_reg_read(&val, mmio); |
| if (ret) |
| return ret; |
| if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE) |
| break; |
| } while (--timeout); |
| |
| return timeout ? 0 : -ETIMEDOUT; |
| } |
| |
| enum { |
| /* SATA PHY Register */ |
| SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001, |
| SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008, |
| SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009, |
| SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A, |
| SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017, |
| }; |
| |
| static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio) |
| { |
| u16 adc_out_reg, read_sum; |
| u32 index, read_attempt; |
| const u32 attempt_limit = 100; |
| |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio); |
| imx_phy_reg_write(rtune_ctl_reg, mmio); |
| |
| /* two dummy read */ |
| index = 0; |
| read_attempt = 0; |
| adc_out_reg = 0; |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_ADC_OUT, mmio); |
| while (index < 2) { |
| imx_phy_reg_read(&adc_out_reg, mmio); |
| /* check if valid */ |
| if (adc_out_reg & 0x400) |
| index++; |
| |
| read_attempt++; |
| if (read_attempt > attempt_limit) { |
| dev_err(dev, "Read REG more than %d times!\n", |
| attempt_limit); |
| break; |
| } |
| } |
| |
| index = 0; |
| read_attempt = 0; |
| read_sum = 0; |
| while (index < 80) { |
| imx_phy_reg_read(&adc_out_reg, mmio); |
| if (adc_out_reg & 0x400) { |
| read_sum = read_sum + (adc_out_reg & 0x3FF); |
| index++; |
| } |
| read_attempt++; |
| if (read_attempt > attempt_limit) { |
| dev_err(dev, "Read REG more than %d times!\n", |
| attempt_limit); |
| break; |
| } |
| } |
| |
| /* Use the U32 to make 1000 precision */ |
| return (read_sum * 1000) / 80; |
| } |
| |
| /* SATA AHCI temperature monitor */ |
| static int sata_ahci_read_temperature(void *dev, int *temp) |
| { |
| u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum; |
| u32 str1, str2, str3, str4; |
| int m1, m2, a; |
| struct ahci_host_priv *hpriv = dev_get_drvdata(dev); |
| void __iomem *mmio = hpriv->mmio; |
| |
| /* check rd-wr to reg */ |
| read_sum = 0; |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT, mmio); |
| imx_phy_reg_write(read_sum, mmio); |
| imx_phy_reg_read(&read_sum, mmio); |
| if ((read_sum & 0xffff) != 0) |
| dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum); |
| |
| imx_phy_reg_write(0x5A5A, mmio); |
| imx_phy_reg_read(&read_sum, mmio); |
| if ((read_sum & 0xffff) != 0x5A5A) |
| dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum); |
| |
| imx_phy_reg_write(0x1234, mmio); |
| imx_phy_reg_read(&read_sum, mmio); |
| if ((read_sum & 0xffff) != 0x1234) |
| dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum); |
| |
| /* start temperature test */ |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio); |
| imx_phy_reg_read(&mpll_test_reg, mmio); |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio); |
| imx_phy_reg_read(&rtune_ctl_reg, mmio); |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio); |
| imx_phy_reg_read(&dac_ctl_reg, mmio); |
| |
| /* mpll_tst.meas_iv ([12:2]) */ |
| str1 = (mpll_test_reg >> 2) & 0x7FF; |
| /* rtune_ctl.mode ([1:0]) */ |
| str2 = (rtune_ctl_reg) & 0x3; |
| /* dac_ctl.dac_mode ([14:12]) */ |
| str3 = (dac_ctl_reg >> 12) & 0x7; |
| /* rtune_ctl.sel_atbp ([4]) */ |
| str4 = (rtune_ctl_reg >> 4); |
| |
| /* Calculate the m1 */ |
| /* mpll_tst.meas_iv */ |
| mpll_test_reg = (mpll_test_reg & 0xE03) | (512) << 2; |
| /* rtune_ctl.mode */ |
| rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (1); |
| /* dac_ctl.dac_mode */ |
| dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (4) << 12; |
| /* rtune_ctl.sel_atbp */ |
| rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (0) << 4; |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio); |
| imx_phy_reg_write(mpll_test_reg, mmio); |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio); |
| imx_phy_reg_write(dac_ctl_reg, mmio); |
| m1 = read_adc_sum(dev, rtune_ctl_reg, mmio); |
| |
| /* Calculate the m2 */ |
| /* rtune_ctl.sel_atbp */ |
| rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (1) << 4; |
| m2 = read_adc_sum(dev, rtune_ctl_reg, mmio); |
| |
| /* restore the status */ |
| /* mpll_tst.meas_iv */ |
| mpll_test_reg = (mpll_test_reg & 0xE03) | (str1) << 2; |
| /* rtune_ctl.mode */ |
| rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (str2); |
| /* dac_ctl.dac_mode */ |
| dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (str3) << 12; |
| /* rtune_ctl.sel_atbp */ |
| rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (str4) << 4; |
| |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio); |
| imx_phy_reg_write(mpll_test_reg, mmio); |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio); |
| imx_phy_reg_write(dac_ctl_reg, mmio); |
| imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio); |
| imx_phy_reg_write(rtune_ctl_reg, mmio); |
| |
| /* Compute temperature */ |
| if (!(m2 / 1000)) |
| m2 = 1000; |
| a = (m2 - m1) / (m2/1000); |
| *temp = ((-559) * a * a) / 1000 + (1379) * a + (-458000); |
| |
| return 0; |
| } |
| |
| static ssize_t sata_ahci_show_temp(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| unsigned int temp = 0; |
| int err; |
| |
| err = sata_ahci_read_temperature(dev, &temp); |
| if (err < 0) |
| return err; |
| |
| return sprintf(buf, "%u\n", temp); |
| } |
| |
| static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = { |
| .get_temp = sata_ahci_read_temperature, |
| }; |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sata_ahci_show_temp, NULL, 0); |
| |
| static struct attribute *fsl_sata_ahci_attrs[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(fsl_sata_ahci); |
| |
| static int imx_sata_enable(struct ahci_host_priv *hpriv) |
| { |
| struct imx_ahci_priv *imxpriv = hpriv->plat_data; |
| struct device *dev = &imxpriv->ahci_pdev->dev; |
| int ret; |
| |
| if (imxpriv->no_device) |
| return 0; |
| |
| ret = ahci_platform_enable_regulators(hpriv); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(imxpriv->sata_ref_clk); |
| if (ret < 0) |
| goto disable_regulator; |
| |
| if (imxpriv->type == AHCI_IMX6Q) { |
| /* |
| * set PHY Paremeters, two steps to configure the GPR13, |
| * one write for rest of parameters, mask of first write |
| * is 0x07ffffff, and the other one write for setting |
| * the mpll_clk_en. |
| */ |
| regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, |
| IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK | |
| IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK | |
| IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK | |
| IMX6Q_GPR13_SATA_SPD_MODE_MASK | |
| IMX6Q_GPR13_SATA_MPLL_SS_EN | |
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK | |
| IMX6Q_GPR13_SATA_TX_BOOST_MASK | |
| IMX6Q_GPR13_SATA_TX_LVL_MASK | |
| IMX6Q_GPR13_SATA_MPLL_CLK_EN | |
| IMX6Q_GPR13_SATA_TX_EDGE_RATE, |
| imxpriv->phy_params); |
| regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, |
| IMX6Q_GPR13_SATA_MPLL_CLK_EN, |
| IMX6Q_GPR13_SATA_MPLL_CLK_EN); |
| |
| usleep_range(100, 200); |
| |
| ret = imx_sata_phy_reset(hpriv); |
| if (ret) { |
| dev_err(dev, "failed to reset phy: %d\n", ret); |
| goto disable_clk; |
| } |
| } |
| |
| usleep_range(1000, 2000); |
| |
| return 0; |
| |
| disable_clk: |
| clk_disable_unprepare(imxpriv->sata_ref_clk); |
| disable_regulator: |
| ahci_platform_disable_regulators(hpriv); |
| |
| return ret; |
| } |
| |
| static void imx_sata_disable(struct ahci_host_priv *hpriv) |
| { |
| struct imx_ahci_priv *imxpriv = hpriv->plat_data; |
| |
| if (imxpriv->no_device) |
| return; |
| |
| if (imxpriv->type == AHCI_IMX6Q) { |
| regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, |
| IMX6Q_GPR13_SATA_MPLL_CLK_EN, |
| !IMX6Q_GPR13_SATA_MPLL_CLK_EN); |
| } |
| |
| clk_disable_unprepare(imxpriv->sata_ref_clk); |
| |
| ahci_platform_disable_regulators(hpriv); |
| } |
| |
| static void ahci_imx_error_handler(struct ata_port *ap) |
| { |
| u32 reg_val; |
| struct ata_device *dev; |
| struct ata_host *host = dev_get_drvdata(ap->dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| struct imx_ahci_priv *imxpriv = hpriv->plat_data; |
| |
| ahci_error_handler(ap); |
| |
| if (!(imxpriv->first_time) || ahci_imx_hotplug) |
| return; |
| |
| imxpriv->first_time = false; |
| |
| ata_for_each_dev(dev, &ap->link, ENABLED) |
| return; |
| /* |
| * Disable link to save power. An imx ahci port can't be recovered |
| * without full reset once the pddq mode is enabled making it |
| * impossible to use as part of libata LPM. |
| */ |
| reg_val = readl(mmio + IMX_P0PHYCR); |
| writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR); |
| imx_sata_disable(hpriv); |
| imxpriv->no_device = true; |
| |
| dev_info(ap->dev, "no device found, disabling link.\n"); |
| dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n"); |
| } |
| |
| static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| struct ata_host *host = dev_get_drvdata(ap->dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| struct imx_ahci_priv *imxpriv = hpriv->plat_data; |
| int ret = -EIO; |
| |
| if (imxpriv->type == AHCI_IMX53) |
| ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline); |
| else if (imxpriv->type == AHCI_IMX6Q) |
| ret = ahci_ops.softreset(link, class, deadline); |
| |
| return ret; |
| } |
| |
| static struct ata_port_operations ahci_imx_ops = { |
| .inherits = &ahci_ops, |
| .host_stop = ahci_imx_host_stop, |
| .error_handler = ahci_imx_error_handler, |
| .softreset = ahci_imx_softreset, |
| }; |
| |
| static const struct ata_port_info ahci_imx_port_info = { |
| .flags = AHCI_FLAG_COMMON, |
| .pio_mask = ATA_PIO4, |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_imx_ops, |
| }; |
| |
| static const struct of_device_id imx_ahci_of_match[] = { |
| { .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 }, |
| { .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, imx_ahci_of_match); |
| |
| struct reg_value { |
| u32 of_value; |
| u32 reg_value; |
| }; |
| |
| struct reg_property { |
| const char *name; |
| const struct reg_value *values; |
| size_t num_values; |
| u32 def_value; |
| u32 set_value; |
| }; |
| |
| static const struct reg_value gpr13_tx_level[] = { |
| { 937, IMX6Q_GPR13_SATA_TX_LVL_0_937_V }, |
| { 947, IMX6Q_GPR13_SATA_TX_LVL_0_947_V }, |
| { 957, IMX6Q_GPR13_SATA_TX_LVL_0_957_V }, |
| { 966, IMX6Q_GPR13_SATA_TX_LVL_0_966_V }, |
| { 976, IMX6Q_GPR13_SATA_TX_LVL_0_976_V }, |
| { 986, IMX6Q_GPR13_SATA_TX_LVL_0_986_V }, |
| { 996, IMX6Q_GPR13_SATA_TX_LVL_0_996_V }, |
| { 1005, IMX6Q_GPR13_SATA_TX_LVL_1_005_V }, |
| { 1015, IMX6Q_GPR13_SATA_TX_LVL_1_015_V }, |
| { 1025, IMX6Q_GPR13_SATA_TX_LVL_1_025_V }, |
| { 1035, IMX6Q_GPR13_SATA_TX_LVL_1_035_V }, |
| { 1045, IMX6Q_GPR13_SATA_TX_LVL_1_045_V }, |
| { 1054, IMX6Q_GPR13_SATA_TX_LVL_1_054_V }, |
| { 1064, IMX6Q_GPR13_SATA_TX_LVL_1_064_V }, |
| { 1074, IMX6Q_GPR13_SATA_TX_LVL_1_074_V }, |
| { 1084, IMX6Q_GPR13_SATA_TX_LVL_1_084_V }, |
| { 1094, IMX6Q_GPR13_SATA_TX_LVL_1_094_V }, |
| { 1104, IMX6Q_GPR13_SATA_TX_LVL_1_104_V }, |
| { 1113, IMX6Q_GPR13_SATA_TX_LVL_1_113_V }, |
| { 1123, IMX6Q_GPR13_SATA_TX_LVL_1_123_V }, |
| { 1133, IMX6Q_GPR13_SATA_TX_LVL_1_133_V }, |
| { 1143, IMX6Q_GPR13_SATA_TX_LVL_1_143_V }, |
| { 1152, IMX6Q_GPR13_SATA_TX_LVL_1_152_V }, |
| { 1162, IMX6Q_GPR13_SATA_TX_LVL_1_162_V }, |
| { 1172, IMX6Q_GPR13_SATA_TX_LVL_1_172_V }, |
| { 1182, IMX6Q_GPR13_SATA_TX_LVL_1_182_V }, |
| { 1191, IMX6Q_GPR13_SATA_TX_LVL_1_191_V }, |
| { 1201, IMX6Q_GPR13_SATA_TX_LVL_1_201_V }, |
| { 1211, IMX6Q_GPR13_SATA_TX_LVL_1_211_V }, |
| { 1221, IMX6Q_GPR13_SATA_TX_LVL_1_221_V }, |
| { 1230, IMX6Q_GPR13_SATA_TX_LVL_1_230_V }, |
| { 1240, IMX6Q_GPR13_SATA_TX_LVL_1_240_V } |
| }; |
| |
| static const struct reg_value gpr13_tx_boost[] = { |
| { 0, IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB }, |
| { 370, IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB }, |
| { 740, IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB }, |
| { 1110, IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB }, |
| { 1480, IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB }, |
| { 1850, IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB }, |
| { 2220, IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB }, |
| { 2590, IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB }, |
| { 2960, IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB }, |
| { 3330, IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB }, |
| { 3700, IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB }, |
| { 4070, IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB }, |
| { 4440, IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB }, |
| { 4810, IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB }, |
| { 5280, IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB }, |
| { 5750, IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB } |
| }; |
| |
| static const struct reg_value gpr13_tx_atten[] = { |
| { 8, IMX6Q_GPR13_SATA_TX_ATTEN_8_16 }, |
| { 9, IMX6Q_GPR13_SATA_TX_ATTEN_9_16 }, |
| { 10, IMX6Q_GPR13_SATA_TX_ATTEN_10_16 }, |
| { 12, IMX6Q_GPR13_SATA_TX_ATTEN_12_16 }, |
| { 14, IMX6Q_GPR13_SATA_TX_ATTEN_14_16 }, |
| { 16, IMX6Q_GPR13_SATA_TX_ATTEN_16_16 }, |
| }; |
| |
| static const struct reg_value gpr13_rx_eq[] = { |
| { 500, IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB }, |
| { 1000, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB }, |
| { 1500, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB }, |
| { 2000, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB }, |
| { 2500, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB }, |
| { 3000, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB }, |
| { 3500, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB }, |
| { 4000, IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB }, |
| }; |
| |
| static const struct reg_property gpr13_props[] = { |
| { |
| .name = "fsl,transmit-level-mV", |
| .values = gpr13_tx_level, |
| .num_values = ARRAY_SIZE(gpr13_tx_level), |
| .def_value = IMX6Q_GPR13_SATA_TX_LVL_1_025_V, |
| }, { |
| .name = "fsl,transmit-boost-mdB", |
| .values = gpr13_tx_boost, |
| .num_values = ARRAY_SIZE(gpr13_tx_boost), |
| .def_value = IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB, |
| }, { |
| .name = "fsl,transmit-atten-16ths", |
| .values = gpr13_tx_atten, |
| .num_values = ARRAY_SIZE(gpr13_tx_atten), |
| .def_value = IMX6Q_GPR13_SATA_TX_ATTEN_9_16, |
| }, { |
| .name = "fsl,receive-eq-mdB", |
| .values = gpr13_rx_eq, |
| .num_values = ARRAY_SIZE(gpr13_rx_eq), |
| .def_value = IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB, |
| }, { |
| .name = "fsl,no-spread-spectrum", |
| .def_value = IMX6Q_GPR13_SATA_MPLL_SS_EN, |
| .set_value = 0, |
| }, |
| }; |
| |
| static u32 imx_ahci_parse_props(struct device *dev, |
| const struct reg_property *prop, size_t num) |
| { |
| struct device_node *np = dev->of_node; |
| u32 reg_value = 0; |
| int i, j; |
| |
| for (i = 0; i < num; i++, prop++) { |
| u32 of_val; |
| |
| if (prop->num_values == 0) { |
| if (of_property_read_bool(np, prop->name)) |
| reg_value |= prop->set_value; |
| else |
| reg_value |= prop->def_value; |
| continue; |
| } |
| |
| if (of_property_read_u32(np, prop->name, &of_val)) { |
| dev_info(dev, "%s not specified, using %08x\n", |
| prop->name, prop->def_value); |
| reg_value |= prop->def_value; |
| continue; |
| } |
| |
| for (j = 0; j < prop->num_values; j++) { |
| if (prop->values[j].of_value == of_val) { |
| dev_info(dev, "%s value %u, using %08x\n", |
| prop->name, of_val, prop->values[j].reg_value); |
| reg_value |= prop->values[j].reg_value; |
| break; |
| } |
| } |
| |
| if (j == prop->num_values) { |
| dev_err(dev, "DT property %s is not a valid value\n", |
| prop->name); |
| reg_value |= prop->def_value; |
| } |
| } |
| |
| return reg_value; |
| } |
| |
| static struct scsi_host_template ahci_platform_sht = { |
| AHCI_SHT(DRV_NAME), |
| }; |
| |
| static int imx_ahci_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct of_device_id *of_id; |
| struct ahci_host_priv *hpriv; |
| struct imx_ahci_priv *imxpriv; |
| unsigned int reg_val; |
| int ret; |
| |
| of_id = of_match_device(imx_ahci_of_match, dev); |
| if (!of_id) |
| return -EINVAL; |
| |
| imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); |
| if (!imxpriv) |
| return -ENOMEM; |
| |
| imxpriv->ahci_pdev = pdev; |
| imxpriv->no_device = false; |
| imxpriv->first_time = true; |
| imxpriv->type = (enum ahci_imx_type)of_id->data; |
| |
| imxpriv->sata_clk = devm_clk_get(dev, "sata"); |
| if (IS_ERR(imxpriv->sata_clk)) { |
| dev_err(dev, "can't get sata clock.\n"); |
| return PTR_ERR(imxpriv->sata_clk); |
| } |
| |
| imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); |
| if (IS_ERR(imxpriv->sata_ref_clk)) { |
| dev_err(dev, "can't get sata_ref clock.\n"); |
| return PTR_ERR(imxpriv->sata_ref_clk); |
| } |
| |
| imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); |
| if (IS_ERR(imxpriv->ahb_clk)) { |
| dev_err(dev, "can't get ahb clock.\n"); |
| return PTR_ERR(imxpriv->ahb_clk); |
| } |
| |
| if (imxpriv->type == AHCI_IMX6Q) { |
| u32 reg_value; |
| |
| imxpriv->gpr = syscon_regmap_lookup_by_compatible( |
| "fsl,imx6q-iomuxc-gpr"); |
| if (IS_ERR(imxpriv->gpr)) { |
| dev_err(dev, |
| "failed to find fsl,imx6q-iomux-gpr regmap\n"); |
| return PTR_ERR(imxpriv->gpr); |
| } |
| |
| reg_value = imx_ahci_parse_props(dev, gpr13_props, |
| ARRAY_SIZE(gpr13_props)); |
| |
| imxpriv->phy_params = |
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M | |
| IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F | |
| IMX6Q_GPR13_SATA_SPD_MODE_3P0G | |
| reg_value; |
| } |
| |
| hpriv = ahci_platform_get_resources(pdev); |
| if (IS_ERR(hpriv)) |
| return PTR_ERR(hpriv); |
| |
| hpriv->plat_data = imxpriv; |
| |
| ret = clk_prepare_enable(imxpriv->sata_clk); |
| if (ret) |
| return ret; |
| |
| if (imxpriv->type == AHCI_IMX53 && |
| IS_ENABLED(CONFIG_HWMON)) { |
| /* Add the temperature monitor */ |
| struct device *hwmon_dev; |
| |
| hwmon_dev = |
| devm_hwmon_device_register_with_groups(dev, |
| "sata_ahci", |
| hpriv, |
| fsl_sata_ahci_groups); |
| if (IS_ERR(hwmon_dev)) { |
| ret = PTR_ERR(hwmon_dev); |
| goto disable_clk; |
| } |
| devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev, |
| &fsl_sata_ahci_of_thermal_ops); |
| dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev)); |
| } |
| |
| ret = imx_sata_enable(hpriv); |
| if (ret) |
| goto disable_clk; |
| |
| /* |
| * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, |
| * and IP vendor specific register IMX_TIMER1MS. |
| * Configure CAP_SSS (support stagered spin up). |
| * Implement the port0. |
| * Get the ahb clock rate, and configure the TIMER1MS register. |
| */ |
| reg_val = readl(hpriv->mmio + HOST_CAP); |
| if (!(reg_val & HOST_CAP_SSS)) { |
| reg_val |= HOST_CAP_SSS; |
| writel(reg_val, hpriv->mmio + HOST_CAP); |
| } |
| reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL); |
| if (!(reg_val & 0x1)) { |
| reg_val |= 0x1; |
| writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL); |
| } |
| |
| reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; |
| writel(reg_val, hpriv->mmio + IMX_TIMER1MS); |
| |
| ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, |
| &ahci_platform_sht); |
| if (ret) |
| goto disable_sata; |
| |
| return 0; |
| |
| disable_sata: |
| imx_sata_disable(hpriv); |
| disable_clk: |
| clk_disable_unprepare(imxpriv->sata_clk); |
| return ret; |
| } |
| |
| static void ahci_imx_host_stop(struct ata_host *host) |
| { |
| struct ahci_host_priv *hpriv = host->private_data; |
| struct imx_ahci_priv *imxpriv = hpriv->plat_data; |
| |
| imx_sata_disable(hpriv); |
| clk_disable_unprepare(imxpriv->sata_clk); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int imx_ahci_suspend(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| int ret; |
| |
| ret = ahci_platform_suspend_host(dev); |
| if (ret) |
| return ret; |
| |
| imx_sata_disable(hpriv); |
| |
| return 0; |
| } |
| |
| static int imx_ahci_resume(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| int ret; |
| |
| ret = imx_sata_enable(hpriv); |
| if (ret) |
| return ret; |
| |
| return ahci_platform_resume_host(dev); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume); |
| |
| static struct platform_driver imx_ahci_driver = { |
| .probe = imx_ahci_probe, |
| .remove = ata_platform_remove_one, |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = imx_ahci_of_match, |
| .pm = &ahci_imx_pm_ops, |
| }, |
| }; |
| module_platform_driver(imx_ahci_driver); |
| |
| MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver"); |
| MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("ahci:imx"); |