| /* |
| * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| /dts-v1/; |
| |
| #include "am33xx.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| model = "TI AM335x BeagleBone Blue"; |
| compatible = "ti,am335x-bone-blue", "ti,am33xx"; |
| |
| cpus { |
| cpu@0 { |
| cpu0-supply = <&dcdc2_reg>; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x20000000>; /* 512 MB */ |
| }; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| leds { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&user_leds_s0>; |
| |
| compatible = "gpio-leds"; |
| |
| usr_0_led { |
| label = "beaglebone:green:usr0"; |
| gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| default-state = "off"; |
| }; |
| |
| usr_1_led { |
| label = "beaglebone:green:usr1"; |
| gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc0"; |
| default-state = "off"; |
| }; |
| |
| usr_2_led { |
| label = "beaglebone:green:usr2"; |
| gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "cpu0"; |
| default-state = "off"; |
| }; |
| |
| usr_3_led { |
| label = "beaglebone:green:usr3"; |
| gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc1"; |
| default-state = "off"; |
| }; |
| |
| wifi_led { |
| label = "wifi"; |
| gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| linux,default-trigger = "phy0assoc"; |
| }; |
| |
| red_led { |
| label = "red"; |
| gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| green_led { |
| label = "green"; |
| gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_1_led { |
| label = "bat25"; |
| gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_2_led { |
| label = "bat50"; |
| gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_3_led { |
| label = "bat75"; |
| gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| batt_4_led { |
| label = "bat100"; |
| gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| vmmcsd_fixed: fixedregulator0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vmmcsd_fixed"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| wlan_en_reg: fixedregulator@2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "wlan-en-regulator"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| startup-delay-us= <70000>; |
| |
| /* WL_EN */ |
| gpio = <&gpio3 9 0>; |
| enable-active-high; |
| }; |
| }; |
| |
| &am33xx_pinmux { |
| user_leds_s0: user_leds_s0 { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ |
| AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ |
| AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ |
| AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ |
| AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ |
| AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ |
| AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ |
| AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ |
| AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ |
| AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ |
| AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ |
| |
| >; |
| }; |
| |
| i2c0_pins: pinmux_i2c0_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ |
| AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ |
| >; |
| }; |
| |
| i2c2_pins: pinmux_i2c2_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ |
| AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ |
| >; |
| }; |
| |
| uart0_pins: pinmux_uart0_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ |
| AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ |
| >; |
| }; |
| |
| mmc1_pins: pinmux_mmc1_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ |
| >; |
| }; |
| |
| mmc2_pins: pinmux_mmc2_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ |
| AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ |
| AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ |
| AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ |
| AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ |
| AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ |
| AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ |
| AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ |
| AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ |
| AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ |
| >; |
| }; |
| |
| mmc3_pins: pinmux_mmc3_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ |
| AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ |
| AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ |
| AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ |
| AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ |
| AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ |
| >; |
| }; |
| |
| bt_pins: pinmux_bt_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ |
| >; |
| }; |
| |
| uart3_pins: pinmux_uart3_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ |
| AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ |
| AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ |
| AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ |
| >; |
| }; |
| |
| wl18xx_pins: pinmux_wl18xx_pins { |
| pinctrl-single,pins = < |
| AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ |
| AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ |
| AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ |
| >; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
| |
| &usb_ctrl_mod { |
| status = "okay"; |
| }; |
| |
| &usb0_phy { |
| status = "okay"; |
| }; |
| |
| &usb1_phy { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| dr_mode = "peripheral"; |
| interrupts-extended = <&intc 18 &tps 0>; |
| interrupt-names = "mc", "vbus"; |
| }; |
| |
| &usb1 { |
| status = "okay"; |
| dr_mode = "host"; |
| }; |
| |
| &cppi41dma { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| tps: tps@24 { |
| reg = <0x24>; |
| }; |
| |
| baseboard_eeprom: baseboard_eeprom@50 { |
| compatible = "at,24c256"; |
| reg = <0x50>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| baseboard_data: baseboard_data@0 { |
| reg = <0 0x100>; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| mpu9250@68 { |
| compatible = "invensense,mpu9250"; |
| reg = <0x68>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <21 GPIO_ACTIVE_LOW>; |
| i2c-gate { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ax8975@c { |
| compatible = "ak,ak8975"; |
| reg = <0x0c>; |
| }; |
| }; |
| }; |
| |
| pressure@76 { |
| compatible = "bosch,bmp280"; |
| reg = <0x76>; |
| }; |
| }; |
| |
| /include/ "tps65217.dtsi" |
| |
| &tps { |
| interrupts = <7>; /* NMI */ |
| interrupt-parent = <&intc>; |
| |
| charger { |
| interrupts = <0>, <1>; |
| interrupt-names = "USB", "AC"; |
| status = "okay"; |
| }; |
| |
| pwrbutton { |
| interrupts = <2>; |
| status = "okay"; |
| }; |
| |
| regulators { |
| dcdc1_reg: regulator@0 { |
| regulator-name = "vdds_dpr"; |
| regulator-always-on; |
| }; |
| |
| dcdc2_reg: regulator@1 { |
| /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ |
| regulator-name = "vdd_mpu"; |
| regulator-min-microvolt = <925000>; |
| regulator-max-microvolt = <1351500>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| dcdc3_reg: regulator@2 { |
| /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ |
| regulator-name = "vdd_core"; |
| regulator-min-microvolt = <925000>; |
| regulator-max-microvolt = <1150000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo1_reg: regulator@3 { |
| regulator-name = "vio,vrtc,vdds"; |
| regulator-always-on; |
| }; |
| |
| ldo2_reg: regulator@4 { |
| regulator-name = "vdd_3v3aux"; |
| regulator-always-on; |
| }; |
| |
| ldo3_reg: regulator@5 { |
| regulator-name = "vdd_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| ldo4_reg: regulator@6 { |
| regulator-name = "vdd_3v3a"; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| vmmc-supply = <&vmmcsd_fixed>; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &mmc2 { |
| status = "okay"; |
| vmmc-supply = <&vmmcsd_fixed>; |
| bus-width = <8>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc2_pins>; |
| }; |
| |
| &mmc3 { |
| dmas = <&edma_xbar 12 0 1 |
| &edma_xbar 13 0 2>; |
| dma-names = "tx", "rx"; |
| status = "okay"; |
| vmmc-supply = <&wlan_en_reg>; |
| bus-width = <4>; |
| non-removable; |
| cap-power-off-card; |
| ti,needs-special-hs-handling; |
| keep-power-in-suspend; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc3_pins &wl18xx_pins>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| wlcore: wlcore@2 { |
| compatible = "ti,wl1835"; |
| reg = <2>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <29 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| &tscadc { |
| status = "okay"; |
| adc { |
| ti,adc-channels = <0 1 2 3 4 5 6 7>; |
| }; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins &bt_pins>; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "ti,wl1835-st"; |
| enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &aes { |
| status = "okay"; |
| }; |
| |
| &sham { |
| status = "okay"; |
| }; |
| |
| &rtc { |
| system-power-controller; |
| clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; |
| clock-names = "ext-clk", "int-clk"; |
| }; |
| |
| &gpio3 { |
| ls_buf_en { |
| gpio-hog; |
| gpios = <10 GPIO_ACTIVE_HIGH>; |
| output-high; |
| line-name = "LS_BUF_EN"; |
| }; |
| }; |
