drivers/hid/hid-wacom.c

/*
 *  Bluetooth Wacom Tablet support
 *
 *  Copyright (c) 1999 Andreas Gal
 *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
 *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
 *  Copyright (c) 2006-2007 Jiri Kosina
 *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
 *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
 *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
 *  Copyright (c) 2011 Przemysław Firszt <przemo@firszt.eu>
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/power_supply.h>

#include "hid-ids.h"

#define PAD_DEVICE_ID	0x0F

#define WAC_CMD_LED_CONTROL     0x20

struct wacom_data {
	__u16 tool;
	__u16 butstate;
	__u8 whlstate;
	__u8 features;
	__u32 id;
	__u32 serial;
	unsigned char high_speed;
	__u8 battery_capacity;
	__u8 power_raw;
	__u8 ps_connected;
	struct power_supply battery;
	struct power_supply ac;
	__u8 led_selector;
	struct led_classdev *leds[4];
};

/*percent of battery capacity for Graphire
  8th value means AC online and show 100% capacity */
static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 };
/*percent of battery capacity for Intuos4 WL, AC has a separate bit*/
static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 };

static enum power_supply_property wacom_battery_props[] = {
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_CAPACITY,
	POWER_SUPPLY_PROP_SCOPE,
};

static enum power_supply_property wacom_ac_props[] = {
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_ONLINE,
	POWER_SUPPLY_PROP_SCOPE,
};

static void wacom_leds_set_brightness(struct led_classdev *led_dev,
						enum led_brightness value)
{
	struct device *dev = led_dev->dev->parent;
	struct hid_device *hdev;
	struct wacom_data *wdata;
	unsigned char *buf;
	__u8 led = 0;
	int i;

	hdev = container_of(dev, struct hid_device, dev);
	wdata = hid_get_drvdata(hdev);
	for (i = 0; i < 4; ++i) {
		if (wdata->leds[i] == led_dev)
			wdata->led_selector = i;
	}

	led = wdata->led_selector | 0x04;
	buf = kzalloc(9, GFP_KERNEL);
	if (buf) {
		buf[0] = WAC_CMD_LED_CONTROL;
		buf[1] = led;
		buf[2] = value;
		hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT);
		kfree(buf);
	}

	return;
}

static enum led_brightness wacom_leds_get_brightness(struct led_classdev *led_dev)
{
	struct wacom_data *wdata;
	struct device *dev = led_dev->dev->parent;
	int value = 0;
	int i;

	wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));

	for (i = 0; i < 4; ++i) {
		if (wdata->leds[i] == led_dev) {
			value = wdata->leds[i]->brightness;
			break;
		}
	}

	return value;
}


static int wacom_initialize_leds(struct hid_device *hdev)
{
	struct wacom_data *wdata = hid_get_drvdata(hdev);
	struct led_classdev *led;
	struct device *dev = &hdev->dev;
	size_t namesz = strlen(dev_name(dev)) + 12;
	char *name;
	int i, ret;

	wdata->led_selector = 0;

	for (i = 0; i < 4; i++) {
		led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL);
		if (!led) {
			hid_warn(hdev,
				 "can't allocate memory for LED selector\n");
			ret = -ENOMEM;
			goto err;
		}

		name = (void *)&led[1];
		snprintf(name, namesz, "%s:selector:%d", dev_name(dev), i);
		led->name = name;
		led->brightness = 0;
		led->max_brightness = 127;
		led->brightness_get = wacom_leds_get_brightness;
		led->brightness_set = wacom_leds_set_brightness;

		wdata->leds[i] = led;

		ret = led_classdev_register(dev, wdata->leds[i]);

		if (ret) {
			wdata->leds[i] = NULL;
			kfree(led);
			hid_warn(hdev, "can't register LED\n");
			goto err;
		}
	}

err:
	return ret;
}

static void wacom_destroy_leds(struct hid_device *hdev)
{
	struct wacom_data *wdata = hid_get_drvdata(hdev);
	struct led_classdev *led;
	int i;

	for (i = 0; i < 4; ++i) {
		if (wdata->leds[i]) {
			led = wdata->leds[i];
			wdata->leds[i] = NULL;
			led_classdev_unregister(led);
			kfree(led);
		}
	}

}

static int wacom_battery_get_property(struct power_supply *psy,
				enum power_supply_property psp,
				union power_supply_propval *val)
{
	struct wacom_data *wdata = container_of(psy,
					struct wacom_data, battery);
	int ret = 0;

	switch (psp) {
	case POWER_SUPPLY_PROP_PRESENT:
		val->intval = 1;
		break;
	case POWER_SUPPLY_PROP_SCOPE:
		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
		break;
	case POWER_SUPPLY_PROP_CAPACITY:
		val->intval = wdata->battery_capacity;
		break;
	default:
		ret = -EINVAL;
		break;
	}
	return ret;
}

static int wacom_ac_get_property(struct power_supply *psy,
				enum power_supply_property psp,
				union power_supply_propval *val)
{
	struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
	int ret = 0;

	switch (psp) {
	case POWER_SUPPLY_PROP_PRESENT:
		/* fall through */
	case POWER_SUPPLY_PROP_ONLINE:
		val->intval = wdata->ps_connected;
		break;
	case POWER_SUPPLY_PROP_SCOPE:
		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
		break;
	default:
		ret = -EINVAL;
		break;
	}
	return ret;
}

static void wacom_set_features(struct hid_device *hdev, u8 speed)
{
	struct wacom_data *wdata = hid_get_drvdata(hdev);
	int limit, ret;
	__u8 rep_data[2];

	switch (hdev->product) {
	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
		rep_data[0] = 0x03 ; rep_data[1] = 0x00;
		limit = 3;
		do {
			ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
					HID_FEATURE_REPORT);
		} while (ret < 0 && limit-- > 0);

		if (ret >= 0) {
			if (speed == 0)
				rep_data[0] = 0x05;
			else
				rep_data[0] = 0x06;

			rep_data[1] = 0x00;
			limit = 3;
			do {
				ret = hdev->hid_output_raw_report(hdev,
					rep_data, 2, HID_FEATURE_REPORT);
			} while (ret < 0 && limit-- > 0);

			if (ret >= 0) {
				wdata->high_speed = speed;
				return;
			}
		}

		/*
		 * Note that if the raw queries fail, it's not a hard failure
		 * and it is safe to continue
		 */
		hid_warn(hdev, "failed to poke device, command %d, err %d\n",
			 rep_data[0], ret);
		break;
	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
		if (speed == 1)
			wdata->features &= ~0x20;
		else
			wdata->features |= 0x20;

		rep_data[0] = 0x03;
		rep_data[1] = wdata->features;

		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
					HID_FEATURE_REPORT);
		if (ret >= 0)
			wdata->high_speed = speed;
		break;
	}

	return;
}

static ssize_t wacom_show_speed(struct device *dev,
				struct device_attribute
				*attr, char *buf)
{
	struct wacom_data *wdata = dev_get_drvdata(dev);

	return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed);
}

static ssize_t wacom_store_speed(struct device *dev,
				struct device_attribute *attr,
				const char *buf, size_t count)
{
	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
	int new_speed;

	if (sscanf(buf, "%1d", &new_speed ) != 1)
		return -EINVAL;

	if (new_speed == 0 || new_speed == 1) {
		wacom_set_features(hdev, new_speed);
		return strnlen(buf, PAGE_SIZE);
	} else
		return -EINVAL;
}

static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP,
		wacom_show_speed, wacom_store_speed);

static int wacom_gr_parse_report(struct hid_device *hdev,
			struct wacom_data *wdata,
			struct input_dev *input, unsigned char *data)
{
	int tool, x, y, rw;

	tool = 0;
	/* Get X & Y positions */
	x = le16_to_cpu(*(__le16 *) &data[2]);
	y = le16_to_cpu(*(__le16 *) &data[4]);

	/* Get current tool identifier */
	if (data[1] & 0x90) { /* If pen is in the in/active area */
		switch ((data[1] >> 5) & 3) {
		case 0:	/* Pen */
			tool = BTN_TOOL_PEN;
			break;

		case 1: /* Rubber */
			tool = BTN_TOOL_RUBBER;
			break;

		case 2: /* Mouse with wheel */
		case 3: /* Mouse without wheel */
			tool = BTN_TOOL_MOUSE;
			break;
		}

		/* Reset tool if out of active tablet area */
		if (!(data[1] & 0x10))
			tool = 0;
	}

	/* If tool changed, notify input subsystem */
	if (wdata->tool != tool) {
		if (wdata->tool) {
			/* Completely reset old tool state */
			if (wdata->tool == BTN_TOOL_MOUSE) {
				input_report_key(input, BTN_LEFT, 0);
				input_report_key(input, BTN_RIGHT, 0);
				input_report_key(input, BTN_MIDDLE, 0);
				input_report_abs(input, ABS_DISTANCE,
					input_abs_get_max(input, ABS_DISTANCE));
			} else {
				input_report_key(input, BTN_TOUCH, 0);
				input_report_key(input, BTN_STYLUS, 0);
				input_report_key(input, BTN_STYLUS2, 0);
				input_report_abs(input, ABS_PRESSURE, 0);
			}
			input_report_key(input, wdata->tool, 0);
			input_sync(input);
		}
		wdata->tool = tool;
		if (tool)
			input_report_key(input, tool, 1);
	}

	if (tool) {
		input_report_abs(input, ABS_X, x);
		input_report_abs(input, ABS_Y, y);

		switch ((data[1] >> 5) & 3) {
		case 2: /* Mouse with wheel */
			input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
			rw = (data[6] & 0x01) ? -1 :
				(data[6] & 0x02) ? 1 : 0;
			input_report_rel(input, REL_WHEEL, rw);
			/* fall through */

		case 3: /* Mouse without wheel */
			input_report_key(input, BTN_LEFT, data[1] & 0x01);
			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
			/* Compute distance between mouse and tablet */
			rw = 44 - (data[6] >> 2);
			if (rw < 0)
				rw = 0;
			else if (rw > 31)
				rw = 31;
			input_report_abs(input, ABS_DISTANCE, rw);
			break;

		default:
			input_report_abs(input, ABS_PRESSURE,
					data[6] | (((__u16) (data[1] & 0x08)) << 5));
			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
			input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
			break;
		}

		input_sync(input);
	}

	/* Report the state of the two buttons at the top of the tablet
	 * as two extra fingerpad keys (buttons 4 & 5). */
	rw = data[7] & 0x03;
	if (rw != wdata->butstate) {
		wdata->butstate = rw;
		input_report_key(input, BTN_0, rw & 0x02);
		input_report_key(input, BTN_1, rw & 0x01);
		input_report_key(input, BTN_TOOL_FINGER, 0xf0);
		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
		input_sync(input);
	}

	/* Store current battery capacity and power supply state*/
	rw = (data[7] >> 2 & 0x07);
	if (rw != wdata->power_raw) {
		wdata->power_raw = rw;
		wdata->battery_capacity = batcap_gr[rw];
		if (rw == 7)
			wdata->ps_connected = 1;
		else
			wdata->ps_connected = 0;
	}
	return 1;
}

static void wacom_i4_parse_button_report(struct wacom_data *wdata,
			struct input_dev *input, unsigned char *data)
{
	__u16 new_butstate;
	__u8 new_whlstate;
	__u8 sync = 0;

	new_whlstate = data[1];
	if (new_whlstate != wdata->whlstate) {
		wdata->whlstate = new_whlstate;
		if (new_whlstate & 0x80) {
			input_report_key(input, BTN_TOUCH, 1);
			input_report_abs(input, ABS_WHEEL, (new_whlstate & 0x7f));
			input_report_key(input, BTN_TOOL_FINGER, 1);
		} else {
			input_report_key(input, BTN_TOUCH, 0);
			input_report_abs(input, ABS_WHEEL, 0);
			input_report_key(input, BTN_TOOL_FINGER, 0);
		}
		sync = 1;
	}

	new_butstate = (data[3] << 1) | (data[2] & 0x01);
	if (new_butstate != wdata->butstate) {
		wdata->butstate = new_butstate;
		input_report_key(input, BTN_0, new_butstate & 0x001);
		input_report_key(input, BTN_1, new_butstate & 0x002);
		input_report_key(input, BTN_2, new_butstate & 0x004);
		input_report_key(input, BTN_3, new_butstate & 0x008);
		input_report_key(input, BTN_4, new_butstate & 0x010);
		input_report_key(input, BTN_5, new_butstate & 0x020);
		input_report_key(input, BTN_6, new_butstate & 0x040);
		input_report_key(input, BTN_7, new_butstate & 0x080);
		input_report_key(input, BTN_8, new_butstate & 0x100);
		input_report_key(input, BTN_TOOL_FINGER, 1);
		sync = 1;
	}

	if (sync) {
		input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
		input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
		input_sync(input);
	}
}

static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
			struct input_dev *input, unsigned char *data)
{
	__u16 x, y, pressure;
	__u8 distance;
	__u8 tilt_x, tilt_y;

	switch (data[1]) {
	case 0x80: /* Out of proximity report */
		input_report_key(input, BTN_TOUCH, 0);
		input_report_abs(input, ABS_PRESSURE, 0);
		input_report_key(input, BTN_STYLUS, 0);
		input_report_key(input, BTN_STYLUS2, 0);
		input_report_key(input, wdata->tool, 0);
		input_report_abs(input, ABS_MISC, 0);
		input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
		wdata->tool = 0;
		input_sync(input);
		break;
	case 0xC2: /* Tool report */
		wdata->id = ((data[2] << 4) | (data[3] >> 4) |
			((data[7] & 0x0f) << 20) |
			((data[8] & 0xf0) << 12));
		wdata->serial = ((data[3] & 0x0f) << 28) +
				(data[4] << 20) + (data[5] << 12) +
				(data[6] << 4) + (data[7] >> 4);

		switch (wdata->id) {
		case 0x100802:
			wdata->tool = BTN_TOOL_PEN;
			break;
		case 0x10080A:
			wdata->tool = BTN_TOOL_RUBBER;
			break;
		}
		break;
	default: /* Position/pressure report */
		x = data[2] << 9 | data[3] << 1 | ((data[9] & 0x02) >> 1);
		y = data[4] << 9 | data[5] << 1 | (data[9] & 0x01);
		pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5)
			| (data[1] & 0x01);
		distance = (data[9] >> 2) & 0x3f;
		tilt_x = ((data[7] << 1) & 0x7e) | (data[8] >> 7);
		tilt_y = data[8] & 0x7f;

		input_report_key(input, BTN_TOUCH, pressure > 1);

		input_report_key(input, BTN_STYLUS, data[1] & 0x02);
		input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
		input_report_key(input, wdata->tool, 1);
		input_report_abs(input, ABS_X, x);
		input_report_abs(input, ABS_Y, y);
		input_report_abs(input, ABS_PRESSURE, pressure);
		input_report_abs(input, ABS_DISTANCE, distance);
		input_report_abs(input, ABS_TILT_X, tilt_x);
		input_report_abs(input, ABS_TILT_Y, tilt_y);
		input_report_abs(input, ABS_MISC, wdata->id);
		input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
		input_report_key(input, wdata->tool, 1);
		input_sync(input);
		break;
	}

	return;
}

static void wacom_i4_parse_report(struct hid_device *hdev,
			struct wacom_data *wdata,
			struct input_dev *input, unsigned char *data)
{
	switch (data[0]) {
	case 0x00: /* Empty report */
		break;
	case 0x02: /* Pen report */
		wacom_i4_parse_pen_report(wdata, input, data);
		break;
	case 0x03: /* Features Report */
		wdata->features = data[2];
		break;
	case 0x0C: /* Button report */
		wacom_i4_parse_button_report(wdata, input, data);
		break;
	default:
		hid_err(hdev, "Unknown report: %d,%d\n", data[0], data[1]);
		break;
	}
}

static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
		u8 *raw_data, int size)
{
	struct wacom_data *wdata = hid_get_drvdata(hdev);
	struct hid_input *hidinput;
	struct input_dev *input;
	unsigned char *data = (unsigned char *) raw_data;
	int i;
	__u8 power_raw;

	if (!(hdev->claimed & HID_CLAIMED_INPUT))
		return 0;

	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
	input = hidinput->input;

	switch (hdev->product) {
	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
		if (data[0] == 0x03) {
			return wacom_gr_parse_report(hdev, wdata, input, data);
		} else {
			hid_err(hdev, "Unknown report: %d,%d size:%d\n",
					data[0], data[1], size);
			return 0;
		}
		break;
	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
		i = 1;

		switch (data[0]) {
		case 0x04:
			wacom_i4_parse_report(hdev, wdata, input, data + i);
			i += 10;
			/* fall through */
		case 0x03:
			wacom_i4_parse_report(hdev, wdata, input, data + i);
			i += 10;
			wacom_i4_parse_report(hdev, wdata, input, data + i);
			power_raw = data[i+10];
			if (power_raw != wdata->power_raw) {
				wdata->power_raw = power_raw;
				wdata->battery_capacity = batcap_i4[power_raw & 0x07];
				wdata->ps_connected = power_raw & 0x08;
			}

			break;
		default:
			hid_err(hdev, "Unknown report: %d,%d size:%d\n",
					data[0], data[1], size);
			return 0;
		}
	}
	return 1;
}

static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi,
	struct hid_field *field, struct hid_usage *usage, unsigned long **bit,
								int *max)
{
	struct input_dev *input = hi->input;

	__set_bit(INPUT_PROP_POINTER, input->propbit);

	/* Basics */
	input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);

	__set_bit(REL_WHEEL, input->relbit);

	__set_bit(BTN_TOOL_PEN, input->keybit);
	__set_bit(BTN_TOUCH, input->keybit);
	__set_bit(BTN_STYLUS, input->keybit);
	__set_bit(BTN_STYLUS2, input->keybit);
	__set_bit(BTN_LEFT, input->keybit);
	__set_bit(BTN_RIGHT, input->keybit);
	__set_bit(BTN_MIDDLE, input->keybit);

	/* Pad */
	input_set_capability(input, EV_MSC, MSC_SERIAL);

	__set_bit(BTN_0, input->keybit);
	__set_bit(BTN_1, input->keybit);
	__set_bit(BTN_TOOL_FINGER, input->keybit);

	/* Distance, rubber and mouse */
	__set_bit(BTN_TOOL_RUBBER, input->keybit);
	__set_bit(BTN_TOOL_MOUSE, input->keybit);

	switch (hdev->product) {
	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
		input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
		input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
		input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
		input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
		break;
	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
		__set_bit(ABS_WHEEL, input->absbit);
		__set_bit(ABS_MISC, input->absbit);
		__set_bit(BTN_2, input->keybit);
		__set_bit(BTN_3, input->keybit);
		__set_bit(BTN_4, input->keybit);
		__set_bit(BTN_5, input->keybit);
		__set_bit(BTN_6, input->keybit);
		__set_bit(BTN_7, input->keybit);
		__set_bit(BTN_8, input->keybit);
		input_set_abs_params(input, ABS_WHEEL, 0, 71, 0, 0);
		input_set_abs_params(input, ABS_X, 0, 40640, 4, 0);
		input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0);
		input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0);
		input_set_abs_params(input, ABS_DISTANCE, 0, 63, 0, 0);
		input_set_abs_params(input, ABS_TILT_X, 0, 127, 0, 0);
		input_set_abs_params(input, ABS_TILT_Y, 0, 127, 0, 0);
		break;
	}

	return 0;
}

static int wacom_probe(struct hid_device *hdev,
		const struct hid_device_id *id)
{
	struct wacom_data *wdata;
	int ret;

	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
	if (wdata == NULL) {
		hid_err(hdev, "can't alloc wacom descriptor\n");
		return -ENOMEM;
	}

	hid_set_drvdata(hdev, wdata);

	/* Parse the HID report now */
	ret = hid_parse(hdev);
	if (ret) {
		hid_err(hdev, "parse failed\n");
		goto err_free;
	}

	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
	if (ret) {
		hid_err(hdev, "hw start failed\n");
		goto err_free;
	}

	ret = device_create_file(&hdev->dev, &dev_attr_speed);
	if (ret)
		hid_warn(hdev,
			 "can't create sysfs speed attribute err: %d\n", ret);

	wdata->features = 0;
	wacom_set_features(hdev, 1);

	if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) {
		sprintf(hdev->name, "%s", "Wacom Intuos4 WL");
		ret = wacom_initialize_leds(hdev);
		if (ret) {
			hid_warn(hdev,
				 "can't create led attribute, err: %d\n", ret);
			goto destroy_leds;
		}
	}

	wdata->battery.properties = wacom_battery_props;
	wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
	wdata->battery.get_property = wacom_battery_get_property;
	wdata->battery.name = "wacom_battery";
	wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
	wdata->battery.use_for_apm = 0;


	ret = power_supply_register(&hdev->dev, &wdata->battery);
	if (ret) {
		hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
			 ret);
		goto err_battery;
	}

	power_supply_powers(&wdata->battery, &hdev->dev);

	wdata->ac.properties = wacom_ac_props;
	wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
	wdata->ac.get_property = wacom_ac_get_property;
	wdata->ac.name = "wacom_ac";
	wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
	wdata->ac.use_for_apm = 0;

	ret = power_supply_register(&hdev->dev, &wdata->ac);
	if (ret) {
		hid_warn(hdev,
			 "can't create ac battery attribute, err: %d\n", ret);
		goto err_ac;
	}

	power_supply_powers(&wdata->ac, &hdev->dev);
	return 0;

err_ac:
	power_supply_unregister(&wdata->battery);
err_battery:
	device_remove_file(&hdev->dev, &dev_attr_speed);
	hid_hw_stop(hdev);
destroy_leds:
	wacom_destroy_leds(hdev);
err_free:
	kfree(wdata);
	return ret;
}

static void wacom_remove(struct hid_device *hdev)
{
	struct wacom_data *wdata = hid_get_drvdata(hdev);

	wacom_destroy_leds(hdev);
	device_remove_file(&hdev->dev, &dev_attr_speed);
	hid_hw_stop(hdev);

	power_supply_unregister(&wdata->battery);
	power_supply_unregister(&wdata->ac);
	kfree(hid_get_drvdata(hdev));
}

static const struct hid_device_id wacom_devices[] = {
	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },

	{ }
};
MODULE_DEVICE_TABLE(hid, wacom_devices);

static struct hid_driver wacom_driver = {
	.name = "wacom",
	.id_table = wacom_devices,
	.probe = wacom_probe,
	.remove = wacom_remove,
	.raw_event = wacom_raw_event,
	.input_mapped = wacom_input_mapped,
};

static int __init wacom_init(void)
{
	int ret;

	ret = hid_register_driver(&wacom_driver);
	if (ret)
		pr_err("can't register wacom driver\n");
	return ret;
}

static void __exit wacom_exit(void)
{
	hid_unregister_driver(&wacom_driver);
}

module_init(wacom_init);
module_exit(wacom_exit);
MODULE_DESCRIPTION("Driver for Wacom Graphire Bluetooth and Wacom Intuos4 WL");
MODULE_LICENSE("GPL");