| /* | 
 |  | 
 |   Broadcom B43 wireless driver | 
 |   LED control | 
 |  | 
 |   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, | 
 |   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> | 
 |   Copyright (c) 2005-2007 Michael Buesch <mb@bu3sch.de> | 
 |   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> | 
 |   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> | 
 |  | 
 |   This program is free software; you can redistribute it and/or modify | 
 |   it under the terms of the GNU General Public License as published by | 
 |   the Free Software Foundation; either version 2 of the License, or | 
 |   (at your option) any later version. | 
 |  | 
 |   This program is distributed in the hope that it will be useful, | 
 |   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |   GNU General Public License for more details. | 
 |  | 
 |   You should have received a copy of the GNU General Public License | 
 |   along with this program; see the file COPYING.  If not, write to | 
 |   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, | 
 |   Boston, MA 02110-1301, USA. | 
 |  | 
 | */ | 
 |  | 
 | #include "b43.h" | 
 | #include "leds.h" | 
 | #include "rfkill.h" | 
 |  | 
 |  | 
 | static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index, | 
 | 			    bool activelow) | 
 | { | 
 | 	u16 ctl; | 
 |  | 
 | 	ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); | 
 | 	if (activelow) | 
 | 		ctl &= ~(1 << led_index); | 
 | 	else | 
 | 		ctl |= (1 << led_index); | 
 | 	b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); | 
 | } | 
 |  | 
 | static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index, | 
 | 			     bool activelow) | 
 | { | 
 | 	u16 ctl; | 
 |  | 
 | 	ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); | 
 | 	if (activelow) | 
 | 		ctl |= (1 << led_index); | 
 | 	else | 
 | 		ctl &= ~(1 << led_index); | 
 | 	b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); | 
 | } | 
 |  | 
 | static void b43_led_update(struct b43_wldev *dev, | 
 | 			   struct b43_led *led) | 
 | { | 
 | 	bool radio_enabled; | 
 | 	bool turn_on; | 
 |  | 
 | 	if (!led->wl) | 
 | 		return; | 
 |  | 
 | 	radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable); | 
 |  | 
 | 	/* The led->state read is racy, but we don't care. In case we raced | 
 | 	 * with the brightness_set handler, we will be called again soon | 
 | 	 * to fixup our state. */ | 
 | 	if (radio_enabled) | 
 | 		turn_on = atomic_read(&led->state) != LED_OFF; | 
 | 	else | 
 | 		turn_on = 0; | 
 | 	if (turn_on == led->hw_state) | 
 | 		return; | 
 | 	led->hw_state = turn_on; | 
 |  | 
 | 	if (turn_on) | 
 | 		b43_led_turn_on(dev, led->index, led->activelow); | 
 | 	else | 
 | 		b43_led_turn_off(dev, led->index, led->activelow); | 
 | } | 
 |  | 
 | static void b43_leds_work(struct work_struct *work) | 
 | { | 
 | 	struct b43_leds *leds = container_of(work, struct b43_leds, work); | 
 | 	struct b43_wl *wl = container_of(leds, struct b43_wl, leds); | 
 | 	struct b43_wldev *dev; | 
 |  | 
 | 	mutex_lock(&wl->mutex); | 
 | 	dev = wl->current_dev; | 
 | 	if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) | 
 | 		goto out_unlock; | 
 |  | 
 | 	b43_led_update(dev, &wl->leds.led_tx); | 
 | 	b43_led_update(dev, &wl->leds.led_rx); | 
 | 	b43_led_update(dev, &wl->leds.led_radio); | 
 | 	b43_led_update(dev, &wl->leds.led_assoc); | 
 |  | 
 | out_unlock: | 
 | 	mutex_unlock(&wl->mutex); | 
 | } | 
 |  | 
 | /* Callback from the LED subsystem. */ | 
 | static void b43_led_brightness_set(struct led_classdev *led_dev, | 
 | 				   enum led_brightness brightness) | 
 | { | 
 | 	struct b43_led *led = container_of(led_dev, struct b43_led, led_dev); | 
 | 	struct b43_wl *wl = led->wl; | 
 |  | 
 | 	if (likely(!wl->leds.stop)) { | 
 | 		atomic_set(&led->state, brightness); | 
 | 		ieee80211_queue_work(wl->hw, &wl->leds.work); | 
 | 	} | 
 | } | 
 |  | 
 | static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, | 
 | 			    const char *name, const char *default_trigger, | 
 | 			    u8 led_index, bool activelow) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (led->wl) | 
 | 		return -EEXIST; | 
 | 	if (!default_trigger) | 
 | 		return -EINVAL; | 
 | 	led->wl = dev->wl; | 
 | 	led->index = led_index; | 
 | 	led->activelow = activelow; | 
 | 	strncpy(led->name, name, sizeof(led->name)); | 
 | 	atomic_set(&led->state, 0); | 
 |  | 
 | 	led->led_dev.name = led->name; | 
 | 	led->led_dev.default_trigger = default_trigger; | 
 | 	led->led_dev.brightness_set = b43_led_brightness_set; | 
 |  | 
 | 	err = led_classdev_register(dev->dev->dev, &led->led_dev); | 
 | 	if (err) { | 
 | 		b43warn(dev->wl, "LEDs: Failed to register %s\n", name); | 
 | 		led->wl = NULL; | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void b43_unregister_led(struct b43_led *led) | 
 | { | 
 | 	if (!led->wl) | 
 | 		return; | 
 | 	led_classdev_unregister(&led->led_dev); | 
 | 	led->wl = NULL; | 
 | } | 
 |  | 
 | static void b43_map_led(struct b43_wldev *dev, | 
 | 			u8 led_index, | 
 | 			enum b43_led_behaviour behaviour, | 
 | 			bool activelow) | 
 | { | 
 | 	struct ieee80211_hw *hw = dev->wl->hw; | 
 | 	char name[B43_LED_MAX_NAME_LEN + 1]; | 
 |  | 
 | 	/* Map the b43 specific LED behaviour value to the | 
 | 	 * generic LED triggers. */ | 
 | 	switch (behaviour) { | 
 | 	case B43_LED_INACTIVE: | 
 | 	case B43_LED_OFF: | 
 | 	case B43_LED_ON: | 
 | 		break; | 
 | 	case B43_LED_ACTIVITY: | 
 | 	case B43_LED_TRANSFER: | 
 | 	case B43_LED_APTRANSFER: | 
 | 		snprintf(name, sizeof(name), | 
 | 			 "b43-%s::tx", wiphy_name(hw->wiphy)); | 
 | 		b43_register_led(dev, &dev->wl->leds.led_tx, name, | 
 | 				 ieee80211_get_tx_led_name(hw), | 
 | 				 led_index, activelow); | 
 | 		snprintf(name, sizeof(name), | 
 | 			 "b43-%s::rx", wiphy_name(hw->wiphy)); | 
 | 		b43_register_led(dev, &dev->wl->leds.led_rx, name, | 
 | 				 ieee80211_get_rx_led_name(hw), | 
 | 				 led_index, activelow); | 
 | 		break; | 
 | 	case B43_LED_RADIO_ALL: | 
 | 	case B43_LED_RADIO_A: | 
 | 	case B43_LED_RADIO_B: | 
 | 	case B43_LED_MODE_BG: | 
 | 		snprintf(name, sizeof(name), | 
 | 			 "b43-%s::radio", wiphy_name(hw->wiphy)); | 
 | 		b43_register_led(dev, &dev->wl->leds.led_radio, name, | 
 | 				 ieee80211_get_radio_led_name(hw), | 
 | 				 led_index, activelow); | 
 | 		break; | 
 | 	case B43_LED_WEIRD: | 
 | 	case B43_LED_ASSOC: | 
 | 		snprintf(name, sizeof(name), | 
 | 			 "b43-%s::assoc", wiphy_name(hw->wiphy)); | 
 | 		b43_register_led(dev, &dev->wl->leds.led_assoc, name, | 
 | 				 ieee80211_get_assoc_led_name(hw), | 
 | 				 led_index, activelow); | 
 | 		break; | 
 | 	default: | 
 | 		b43warn(dev->wl, "LEDs: Unknown behaviour 0x%02X\n", | 
 | 			behaviour); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static void b43_led_get_sprominfo(struct b43_wldev *dev, | 
 | 				  unsigned int led_index, | 
 | 				  enum b43_led_behaviour *behaviour, | 
 | 				  bool *activelow) | 
 | { | 
 | 	struct ssb_bus *bus = dev->dev->bus; | 
 | 	u8 sprom[4]; | 
 |  | 
 | 	sprom[0] = bus->sprom.gpio0; | 
 | 	sprom[1] = bus->sprom.gpio1; | 
 | 	sprom[2] = bus->sprom.gpio2; | 
 | 	sprom[3] = bus->sprom.gpio3; | 
 |  | 
 | 	if (sprom[led_index] == 0xFF) { | 
 | 		/* There is no LED information in the SPROM | 
 | 		 * for this LED. Hardcode it here. */ | 
 | 		*activelow = 0; | 
 | 		switch (led_index) { | 
 | 		case 0: | 
 | 			*behaviour = B43_LED_ACTIVITY; | 
 | 			*activelow = 1; | 
 | 			if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ) | 
 | 				*behaviour = B43_LED_RADIO_ALL; | 
 | 			break; | 
 | 		case 1: | 
 | 			*behaviour = B43_LED_RADIO_B; | 
 | 			if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK) | 
 | 				*behaviour = B43_LED_ASSOC; | 
 | 			break; | 
 | 		case 2: | 
 | 			*behaviour = B43_LED_RADIO_A; | 
 | 			break; | 
 | 		case 3: | 
 | 			*behaviour = B43_LED_OFF; | 
 | 			break; | 
 | 		default: | 
 | 			*behaviour = B43_LED_OFF; | 
 | 			B43_WARN_ON(1); | 
 | 			return; | 
 | 		} | 
 | 	} else { | 
 | 		*behaviour = sprom[led_index] & B43_LED_BEHAVIOUR; | 
 | 		*activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW); | 
 | 	} | 
 | } | 
 |  | 
 | void b43_leds_init(struct b43_wldev *dev) | 
 | { | 
 | 	struct b43_led *led; | 
 | 	unsigned int i; | 
 | 	enum b43_led_behaviour behaviour; | 
 | 	bool activelow; | 
 |  | 
 | 	/* Sync the RF-kill LED state (if we have one) with radio and switch states. */ | 
 | 	led = &dev->wl->leds.led_radio; | 
 | 	if (led->wl) { | 
 | 		if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) { | 
 | 			b43_led_turn_on(dev, led->index, led->activelow); | 
 | 			led->hw_state = 1; | 
 | 			atomic_set(&led->state, 1); | 
 | 		} else { | 
 | 			b43_led_turn_off(dev, led->index, led->activelow); | 
 | 			led->hw_state = 0; | 
 | 			atomic_set(&led->state, 0); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Initialize TX/RX/ASSOC leds */ | 
 | 	led = &dev->wl->leds.led_tx; | 
 | 	if (led->wl) { | 
 | 		b43_led_turn_off(dev, led->index, led->activelow); | 
 | 		led->hw_state = 0; | 
 | 		atomic_set(&led->state, 0); | 
 | 	} | 
 | 	led = &dev->wl->leds.led_rx; | 
 | 	if (led->wl) { | 
 | 		b43_led_turn_off(dev, led->index, led->activelow); | 
 | 		led->hw_state = 0; | 
 | 		atomic_set(&led->state, 0); | 
 | 	} | 
 | 	led = &dev->wl->leds.led_assoc; | 
 | 	if (led->wl) { | 
 | 		b43_led_turn_off(dev, led->index, led->activelow); | 
 | 		led->hw_state = 0; | 
 | 		atomic_set(&led->state, 0); | 
 | 	} | 
 |  | 
 | 	/* Initialize other LED states. */ | 
 | 	for (i = 0; i < B43_MAX_NR_LEDS; i++) { | 
 | 		b43_led_get_sprominfo(dev, i, &behaviour, &activelow); | 
 | 		switch (behaviour) { | 
 | 		case B43_LED_OFF: | 
 | 			b43_led_turn_off(dev, i, activelow); | 
 | 			break; | 
 | 		case B43_LED_ON: | 
 | 			b43_led_turn_on(dev, i, activelow); | 
 | 			break; | 
 | 		default: | 
 | 			/* Leave others as-is. */ | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev->wl->leds.stop = 0; | 
 | } | 
 |  | 
 | void b43_leds_exit(struct b43_wldev *dev) | 
 | { | 
 | 	struct b43_leds *leds = &dev->wl->leds; | 
 |  | 
 | 	b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow); | 
 | 	b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow); | 
 | 	b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow); | 
 | 	b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow); | 
 | } | 
 |  | 
 | void b43_leds_stop(struct b43_wldev *dev) | 
 | { | 
 | 	struct b43_leds *leds = &dev->wl->leds; | 
 |  | 
 | 	leds->stop = 1; | 
 | 	cancel_work_sync(&leds->work); | 
 | } | 
 |  | 
 | void b43_leds_register(struct b43_wldev *dev) | 
 | { | 
 | 	unsigned int i; | 
 | 	enum b43_led_behaviour behaviour; | 
 | 	bool activelow; | 
 |  | 
 | 	INIT_WORK(&dev->wl->leds.work, b43_leds_work); | 
 |  | 
 | 	/* Register the LEDs to the LED subsystem. */ | 
 | 	for (i = 0; i < B43_MAX_NR_LEDS; i++) { | 
 | 		b43_led_get_sprominfo(dev, i, &behaviour, &activelow); | 
 | 		b43_map_led(dev, i, behaviour, activelow); | 
 | 	} | 
 | } | 
 |  | 
 | void b43_leds_unregister(struct b43_wl *wl) | 
 | { | 
 | 	struct b43_leds *leds = &wl->leds; | 
 |  | 
 | 	b43_unregister_led(&leds->led_tx); | 
 | 	b43_unregister_led(&leds->led_rx); | 
 | 	b43_unregister_led(&leds->led_assoc); | 
 | 	b43_unregister_led(&leds->led_radio); | 
 | } |