| /* |
| * Copyright (C) 2016 Marvell Technology Group Ltd. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPLv2 or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /* |
| * Device Tree file for Marvell Armada 7040 Development board platform |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include "armada-7040.dtsi" |
| |
| / { |
| model = "Marvell Armada 7040 DB board"; |
| compatible = "marvell,armada7040-db", "marvell,armada7040", |
| "marvell,armada-ap806-quad", "marvell,armada-ap806"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@00000000 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb3h0-vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb3h1-vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| cpm_usb3_0_phy: cpm-usb3-0-phy { |
| compatible = "usb-nop-xceiv"; |
| vcc-supply = <&cpm_reg_usb3_0_vbus>; |
| }; |
| |
| cpm_usb3_1_phy: cpm-usb3-1-phy { |
| compatible = "usb-nop-xceiv"; |
| vcc-supply = <&cpm_reg_usb3_1_vbus>; |
| }; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| |
| spi-flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "U-Boot"; |
| reg = <0 0x200000>; |
| }; |
| partition@400000 { |
| label = "Filesystem"; |
| reg = <0x200000 0xce0000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| |
| &cpm_pcie2 { |
| status = "okay"; |
| }; |
| |
| &cpm_i2c0 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| |
| expander0: pca9555@21 { |
| compatible = "nxp,pca9555"; |
| pinctrl-names = "default"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x21>; |
| }; |
| }; |
| |
| &cpm_spi1 { |
| status = "okay"; |
| |
| spi-flash@0 { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0x0>; |
| spi-max-frequency = <20000000>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "U-Boot"; |
| reg = <0x0 0x200000>; |
| }; |
| |
| partition@400000 { |
| label = "Filesystem"; |
| reg = <0x200000 0xe00000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &cpm_sata0 { |
| status = "okay"; |
| }; |
| |
| &cpm_usb3_0 { |
| usb-phy = <&cpm_usb3_0_phy>; |
| status = "okay"; |
| }; |
| |
| &cpm_usb3_1 { |
| usb-phy = <&cpm_usb3_1_phy>; |
| status = "okay"; |
| }; |
| |
| &ap_sdhci0 { |
| status = "okay"; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| }; |
| |
| &cpm_sdhci0 { |
| status = "okay"; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| }; |
| |
| &cpm_mdio { |
| status = "okay"; |
| |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| phy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| &cpm_ethernet { |
| status = "okay"; |
| }; |
| |
| &cpm_eth1 { |
| status = "okay"; |
| phy = <&phy0>; |
| phy-mode = "sgmii"; |
| }; |
| |
| &cpm_eth2 { |
| status = "okay"; |
| phy = <&phy1>; |
| phy-mode = "rgmii-id"; |
| }; |