| /* | |
| * ALSA driver for Echoaudio soundcards. | |
| * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; version 2 of the License. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #define ECHO3G_FAMILY | |
| #define ECHOCARD_ECHO3G | |
| #define ECHOCARD_NAME "Echo3G" | |
| #define ECHOCARD_HAS_MONITOR | |
| #define ECHOCARD_HAS_ASIC | |
| #define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL | |
| #define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL | |
| #define ECHOCARD_HAS_SUPER_INTERLEAVE | |
| #define ECHOCARD_HAS_DIGITAL_IO | |
| #define ECHOCARD_HAS_DIGITAL_MODE_SWITCH | |
| #define ECHOCARD_HAS_ADAT 6 | |
| #define ECHOCARD_HAS_EXTERNAL_CLOCK | |
| #define ECHOCARD_HAS_STEREO_BIG_ENDIAN32 | |
| #define ECHOCARD_HAS_MIDI | |
| #define ECHOCARD_HAS_PHANTOM_POWER | |
| /* Pipe indexes */ | |
| #define PX_ANALOG_OUT 0 | |
| #define PX_DIGITAL_OUT chip->px_digital_out | |
| #define PX_ANALOG_IN chip->px_analog_in | |
| #define PX_DIGITAL_IN chip->px_digital_in | |
| #define PX_NUM chip->px_num | |
| /* Bus indexes */ | |
| #define BX_ANALOG_OUT 0 | |
| #define BX_DIGITAL_OUT chip->bx_digital_out | |
| #define BX_ANALOG_IN chip->bx_analog_in | |
| #define BX_DIGITAL_IN chip->bx_digital_in | |
| #define BX_NUM chip->bx_num | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/pci.h> | |
| #include <linux/module.h> | |
| #include <linux/firmware.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <sound/core.h> | |
| #include <sound/info.h> | |
| #include <sound/control.h> | |
| #include <sound/tlv.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include <sound/asoundef.h> | |
| #include <sound/initval.h> | |
| #include <sound/rawmidi.h> | |
| #include <linux/atomic.h> | |
| #include "echoaudio.h" | |
| MODULE_FIRMWARE("ea/loader_dsp.fw"); | |
| MODULE_FIRMWARE("ea/echo3g_dsp.fw"); | |
| MODULE_FIRMWARE("ea/3g_asic.fw"); | |
| #define FW_361_LOADER 0 | |
| #define FW_ECHO3G_DSP 1 | |
| #define FW_3G_ASIC 2 | |
| static const struct firmware card_fw[] = { | |
| {0, "loader_dsp.fw"}, | |
| {0, "echo3g_dsp.fw"}, | |
| {0, "3g_asic.fw"} | |
| }; | |
| static const struct pci_device_id snd_echo_ids[] = { | |
| {0x1057, 0x3410, 0xECC0, 0x0100, 0, 0, 0}, /* Echo 3G */ | |
| {0,} | |
| }; | |
| static struct snd_pcm_hardware pcm_hardware_skel = { | |
| .info = SNDRV_PCM_INFO_MMAP | | |
| SNDRV_PCM_INFO_INTERLEAVED | | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | | |
| SNDRV_PCM_INFO_MMAP_VALID | | |
| SNDRV_PCM_INFO_PAUSE | | |
| SNDRV_PCM_INFO_SYNC_START, | |
| .formats = SNDRV_PCM_FMTBIT_U8 | | |
| SNDRV_PCM_FMTBIT_S16_LE | | |
| SNDRV_PCM_FMTBIT_S24_3LE | | |
| SNDRV_PCM_FMTBIT_S32_LE | | |
| SNDRV_PCM_FMTBIT_S32_BE, | |
| .rates = SNDRV_PCM_RATE_32000 | | |
| SNDRV_PCM_RATE_44100 | | |
| SNDRV_PCM_RATE_48000 | | |
| SNDRV_PCM_RATE_88200 | | |
| SNDRV_PCM_RATE_96000 | | |
| SNDRV_PCM_RATE_CONTINUOUS, | |
| .rate_min = 32000, | |
| .rate_max = 100000, | |
| .channels_min = 1, | |
| .channels_max = 8, | |
| .buffer_bytes_max = 262144, | |
| .period_bytes_min = 32, | |
| .period_bytes_max = 131072, | |
| .periods_min = 2, | |
| .periods_max = 220, | |
| }; | |
| #include "echo3g_dsp.c" | |
| #include "echoaudio_dsp.c" | |
| #include "echoaudio_3g.c" | |
| #include "echoaudio.c" | |
| #include "midi.c" |