| /* | |
| * drivers/gpu/drm/omapdrm/omap_connector.c | |
| * | |
| * Copyright (C) 2011 Texas Instruments | |
| * Author: Rob Clark <rob@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_crtc_helper.h> | |
| #include "omap_drv.h" | |
| /* | |
| * connector funcs | |
| */ | |
| #define to_omap_connector(x) container_of(x, struct omap_connector, base) | |
| struct omap_connector { | |
| struct drm_connector base; | |
| struct omap_dss_device *dssdev; | |
| bool hdmi_mode; | |
| }; | |
| static void omap_connector_hpd_cb(void *cb_data, | |
| enum drm_connector_status status) | |
| { | |
| struct omap_connector *omap_connector = cb_data; | |
| struct drm_connector *connector = &omap_connector->base; | |
| struct drm_device *dev = connector->dev; | |
| enum drm_connector_status old_status; | |
| mutex_lock(&dev->mode_config.mutex); | |
| old_status = connector->status; | |
| connector->status = status; | |
| mutex_unlock(&dev->mode_config.mutex); | |
| if (old_status != status) | |
| drm_kms_helper_hotplug_event(dev); | |
| } | |
| bool omap_connector_get_hdmi_mode(struct drm_connector *connector) | |
| { | |
| struct omap_connector *omap_connector = to_omap_connector(connector); | |
| return omap_connector->hdmi_mode; | |
| } | |
| static enum drm_connector_status omap_connector_detect( | |
| struct drm_connector *connector, bool force) | |
| { | |
| struct omap_connector *omap_connector = to_omap_connector(connector); | |
| struct omap_dss_device *dssdev = omap_connector->dssdev; | |
| struct omap_dss_driver *dssdrv = dssdev->driver; | |
| enum drm_connector_status ret; | |
| if (dssdrv->detect) { | |
| if (dssdrv->detect(dssdev)) | |
| ret = connector_status_connected; | |
| else | |
| ret = connector_status_disconnected; | |
| } else if (dssdev->type == OMAP_DISPLAY_TYPE_DPI || | |
| dssdev->type == OMAP_DISPLAY_TYPE_DBI || | |
| dssdev->type == OMAP_DISPLAY_TYPE_SDI || | |
| dssdev->type == OMAP_DISPLAY_TYPE_DSI) { | |
| ret = connector_status_connected; | |
| } else { | |
| ret = connector_status_unknown; | |
| } | |
| VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force); | |
| return ret; | |
| } | |
| static void omap_connector_destroy(struct drm_connector *connector) | |
| { | |
| struct omap_connector *omap_connector = to_omap_connector(connector); | |
| struct omap_dss_device *dssdev = omap_connector->dssdev; | |
| DBG("%s", omap_connector->dssdev->name); | |
| if (connector->polled == DRM_CONNECTOR_POLL_HPD && | |
| dssdev->driver->unregister_hpd_cb) { | |
| dssdev->driver->unregister_hpd_cb(dssdev); | |
| } | |
| drm_connector_unregister(connector); | |
| drm_connector_cleanup(connector); | |
| kfree(omap_connector); | |
| omap_dss_put_device(dssdev); | |
| } | |
| #define MAX_EDID 512 | |
| static int omap_connector_get_modes(struct drm_connector *connector) | |
| { | |
| struct omap_connector *omap_connector = to_omap_connector(connector); | |
| struct omap_dss_device *dssdev = omap_connector->dssdev; | |
| struct omap_dss_driver *dssdrv = dssdev->driver; | |
| struct drm_device *dev = connector->dev; | |
| int n = 0; | |
| DBG("%s", omap_connector->dssdev->name); | |
| /* if display exposes EDID, then we parse that in the normal way to | |
| * build table of supported modes.. otherwise (ie. fixed resolution | |
| * LCD panels) we just return a single mode corresponding to the | |
| * currently configured timings: | |
| */ | |
| if (dssdrv->read_edid) { | |
| void *edid = kzalloc(MAX_EDID, GFP_KERNEL); | |
| if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) && | |
| drm_edid_is_valid(edid)) { | |
| drm_mode_connector_update_edid_property( | |
| connector, edid); | |
| n = drm_add_edid_modes(connector, edid); | |
| omap_connector->hdmi_mode = | |
| drm_detect_hdmi_monitor(edid); | |
| } else { | |
| drm_mode_connector_update_edid_property( | |
| connector, NULL); | |
| } | |
| kfree(edid); | |
| } else { | |
| struct drm_display_mode *mode = drm_mode_create(dev); | |
| struct videomode vm = {0}; | |
| dssdrv->get_timings(dssdev, &vm); | |
| drm_display_mode_from_videomode(&vm, mode); | |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; | |
| drm_mode_set_name(mode); | |
| drm_mode_probed_add(connector, mode); | |
| n = 1; | |
| } | |
| return n; | |
| } | |
| static int omap_connector_mode_valid(struct drm_connector *connector, | |
| struct drm_display_mode *mode) | |
| { | |
| struct omap_connector *omap_connector = to_omap_connector(connector); | |
| struct omap_dss_device *dssdev = omap_connector->dssdev; | |
| struct omap_dss_driver *dssdrv = dssdev->driver; | |
| struct videomode vm = {0}; | |
| struct drm_device *dev = connector->dev; | |
| struct drm_display_mode *new_mode; | |
| int r, ret = MODE_BAD; | |
| drm_display_mode_to_videomode(mode, &vm); | |
| mode->vrefresh = drm_mode_vrefresh(mode); | |
| /* | |
| * if the panel driver doesn't have a check_timings, it's most likely | |
| * a fixed resolution panel, check if the timings match with the | |
| * panel's timings | |
| */ | |
| if (dssdrv->check_timings) { | |
| r = dssdrv->check_timings(dssdev, &vm); | |
| } else { | |
| struct videomode t = {0}; | |
| dssdrv->get_timings(dssdev, &t); | |
| /* | |
| * Ignore the flags, as we don't get them from | |
| * drm_display_mode_to_videomode. | |
| */ | |
| t.flags = 0; | |
| if (memcmp(&vm, &t, sizeof(vm))) | |
| r = -EINVAL; | |
| else | |
| r = 0; | |
| } | |
| if (!r) { | |
| /* check if vrefresh is still valid */ | |
| new_mode = drm_mode_duplicate(dev, mode); | |
| new_mode->clock = vm.pixelclock / 1000; | |
| new_mode->vrefresh = 0; | |
| if (mode->vrefresh == drm_mode_vrefresh(new_mode)) | |
| ret = MODE_OK; | |
| drm_mode_destroy(dev, new_mode); | |
| } | |
| DBG("connector: mode %s: " | |
| "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", | |
| (ret == MODE_OK) ? "valid" : "invalid", | |
| mode->base.id, mode->name, mode->vrefresh, mode->clock, | |
| mode->hdisplay, mode->hsync_start, | |
| mode->hsync_end, mode->htotal, | |
| mode->vdisplay, mode->vsync_start, | |
| mode->vsync_end, mode->vtotal, mode->type, mode->flags); | |
| return ret; | |
| } | |
| static const struct drm_connector_funcs omap_connector_funcs = { | |
| .reset = drm_atomic_helper_connector_reset, | |
| .detect = omap_connector_detect, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .destroy = omap_connector_destroy, | |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, | |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, | |
| }; | |
| static const struct drm_connector_helper_funcs omap_connector_helper_funcs = { | |
| .get_modes = omap_connector_get_modes, | |
| .mode_valid = omap_connector_mode_valid, | |
| }; | |
| /* initialize connector */ | |
| struct drm_connector *omap_connector_init(struct drm_device *dev, | |
| int connector_type, struct omap_dss_device *dssdev, | |
| struct drm_encoder *encoder) | |
| { | |
| struct drm_connector *connector = NULL; | |
| struct omap_connector *omap_connector; | |
| bool hpd_supported = false; | |
| DBG("%s", dssdev->name); | |
| omap_dss_get_device(dssdev); | |
| omap_connector = kzalloc(sizeof(*omap_connector), GFP_KERNEL); | |
| if (!omap_connector) | |
| goto fail; | |
| omap_connector->dssdev = dssdev; | |
| connector = &omap_connector->base; | |
| drm_connector_init(dev, connector, &omap_connector_funcs, | |
| connector_type); | |
| drm_connector_helper_add(connector, &omap_connector_helper_funcs); | |
| if (dssdev->driver->register_hpd_cb) { | |
| int ret = dssdev->driver->register_hpd_cb(dssdev, | |
| omap_connector_hpd_cb, | |
| omap_connector); | |
| if (!ret) | |
| hpd_supported = true; | |
| else if (ret != -ENOTSUPP) | |
| DBG("%s: Failed to register HPD callback (%d).", | |
| dssdev->name, ret); | |
| } | |
| if (hpd_supported) | |
| connector->polled = DRM_CONNECTOR_POLL_HPD; | |
| else if (dssdev->driver->detect) | |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT | | |
| DRM_CONNECTOR_POLL_DISCONNECT; | |
| else | |
| connector->polled = 0; | |
| connector->interlace_allowed = 1; | |
| connector->doublescan_allowed = 0; | |
| return connector; | |
| fail: | |
| if (connector) | |
| omap_connector_destroy(connector); | |
| return NULL; | |
| } |