| /* | |
| * linux/arch/arm26/kernel/ecard.c | |
| * | |
| * Copyright 1995-2001 Russell King | |
| * Copyright 2003 Ian Molton | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Find all installed expansion cards, and handle interrupts from them. | |
| * | |
| * Created from information from Acorns RiscOS3 PRMs | |
| * 15-Jun-2003 IM Modified from ARM32 (RiscPC capable) version | |
| * 10-Jan-1999 RMK Run loaders in a simulated RISC OS environment. | |
| * 06-May-1997 RMK Added blacklist for cards whose loader doesn't work. | |
| * 12-Sep-1997 RMK Created new handling of interrupt enables/disables | |
| * - cards can now register their own routine to control | |
| * interrupts (recommended). | |
| * 29-Sep-1997 RMK Expansion card interrupt hardware not being re-enabled | |
| * on reset from Linux. (Caused cards not to respond | |
| * under RiscOS without hard reset). | |
| * | |
| */ | |
| #define ECARD_C | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/reboot.h> | |
| #include <linux/mm.h> | |
| #include <linux/slab.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/device.h> | |
| #include <linux/init.h> | |
| #include <asm/dma.h> | |
| #include <asm/ecard.h> | |
| #include <asm/hardware.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/irqchip.h> | |
| #include <asm/tlbflush.h> | |
| enum req { | |
| req_readbytes, | |
| req_reset | |
| }; | |
| struct ecard_request { | |
| enum req req; | |
| ecard_t *ec; | |
| unsigned int address; | |
| unsigned int length; | |
| unsigned int use_loader; | |
| void *buffer; | |
| }; | |
| struct expcard_blacklist { | |
| unsigned short manufacturer; | |
| unsigned short product; | |
| const char *type; | |
| }; | |
| static ecard_t *cards; | |
| static ecard_t *slot_to_expcard[MAX_ECARDS]; | |
| static unsigned int ectcr; | |
| /* List of descriptions of cards which don't have an extended | |
| * identification, or chunk directories containing a description. | |
| */ | |
| static struct expcard_blacklist __initdata blacklist[] = { | |
| { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" } | |
| }; | |
| asmlinkage extern int | |
| ecard_loader_reset(volatile unsigned char *pa, loader_t loader); | |
| asmlinkage extern int | |
| ecard_loader_read(int off, volatile unsigned char *pa, loader_t loader); | |
| static const struct ecard_id * | |
| ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec); | |
| static inline unsigned short | |
| ecard_getu16(unsigned char *v) | |
| { | |
| return v[0] | v[1] << 8; | |
| } | |
| static inline signed long | |
| ecard_gets24(unsigned char *v) | |
| { | |
| return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0); | |
| } | |
| static inline ecard_t * | |
| slot_to_ecard(unsigned int slot) | |
| { | |
| return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL; | |
| } | |
| /* ===================== Expansion card daemon ======================== */ | |
| /* | |
| * Since the loader programs on the expansion cards need to be run | |
| * in a specific environment, create a separate task with this | |
| * environment up, and pass requests to this task as and when we | |
| * need to. | |
| * | |
| * This should allow 99% of loaders to be called from Linux. | |
| * | |
| * From a security standpoint, we trust the card vendors. This | |
| * may be a misplaced trust. | |
| */ | |
| #define BUS_ADDR(x) ((((unsigned long)(x)) << 2) + IO_BASE) | |
| #define POD_INT_ADDR(x) ((volatile unsigned char *)\ | |
| ((BUS_ADDR((x)) - IO_BASE) + IO_START)) | |
| static inline void ecard_task_reset(struct ecard_request *req) | |
| { | |
| struct expansion_card *ec = req->ec; | |
| if (ec->loader) | |
| ecard_loader_reset(POD_INT_ADDR(ec->podaddr), ec->loader); | |
| } | |
| static void | |
| ecard_task_readbytes(struct ecard_request *req) | |
| { | |
| unsigned char *buf = (unsigned char *)req->buffer; | |
| volatile unsigned char *base_addr = | |
| (volatile unsigned char *)POD_INT_ADDR(req->ec->podaddr); | |
| unsigned int len = req->length; | |
| unsigned int off = req->address; | |
| if (!req->use_loader || !req->ec->loader) { | |
| off *= 4; | |
| while (len--) { | |
| *buf++ = base_addr[off]; | |
| off += 4; | |
| } | |
| } else { | |
| while(len--) { | |
| /* | |
| * The following is required by some | |
| * expansion card loader programs. | |
| */ | |
| *(unsigned long *)0x108 = 0; | |
| *buf++ = ecard_loader_read(off++, base_addr, | |
| req->ec->loader); | |
| } | |
| } | |
| } | |
| static void ecard_do_request(struct ecard_request *req) | |
| { | |
| switch (req->req) { | |
| case req_readbytes: | |
| ecard_task_readbytes(req); | |
| break; | |
| case req_reset: | |
| ecard_task_reset(req); | |
| break; | |
| } | |
| } | |
| /* | |
| * On 26-bit processors, we don't need the kcardd thread to access the | |
| * expansion card loaders. We do it directly. | |
| */ | |
| #define ecard_call(req) ecard_do_request(req) | |
| /* ======================= Mid-level card control ===================== */ | |
| static void | |
| ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld) | |
| { | |
| struct ecard_request req; | |
| req.req = req_readbytes; | |
| req.ec = ec; | |
| req.address = off; | |
| req.length = len; | |
| req.use_loader = useld; | |
| req.buffer = addr; | |
| ecard_call(&req); | |
| } | |
| int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num) | |
| { | |
| struct ex_chunk_dir excd; | |
| int index = 16; | |
| int useld = 0; | |
| if (!ec->cid.cd) | |
| return 0; | |
| while(1) { | |
| ecard_readbytes(&excd, ec, index, 8, useld); | |
| index += 8; | |
| if (c_id(&excd) == 0) { | |
| if (!useld && ec->loader) { | |
| useld = 1; | |
| index = 0; | |
| continue; | |
| } | |
| return 0; | |
| } | |
| if (c_id(&excd) == 0xf0) { /* link */ | |
| index = c_start(&excd); | |
| continue; | |
| } | |
| if (c_id(&excd) == 0x80) { /* loader */ | |
| if (!ec->loader) { | |
| ec->loader = (loader_t)kmalloc(c_len(&excd), | |
| GFP_KERNEL); | |
| if (ec->loader) | |
| ecard_readbytes(ec->loader, ec, | |
| (int)c_start(&excd), | |
| c_len(&excd), useld); | |
| else | |
| return 0; | |
| } | |
| continue; | |
| } | |
| if (c_id(&excd) == id && num-- == 0) | |
| break; | |
| } | |
| if (c_id(&excd) & 0x80) { | |
| switch (c_id(&excd) & 0x70) { | |
| case 0x70: | |
| ecard_readbytes((unsigned char *)excd.d.string, ec, | |
| (int)c_start(&excd), c_len(&excd), | |
| useld); | |
| break; | |
| case 0x00: | |
| break; | |
| } | |
| } | |
| cd->start_offset = c_start(&excd); | |
| memcpy(cd->d.string, excd.d.string, 256); | |
| return 1; | |
| } | |
| /* ======================= Interrupt control ============================ */ | |
| static void ecard_def_irq_enable(ecard_t *ec, int irqnr) | |
| { | |
| } | |
| static void ecard_def_irq_disable(ecard_t *ec, int irqnr) | |
| { | |
| } | |
| static int ecard_def_irq_pending(ecard_t *ec) | |
| { | |
| return !ec->irqmask || ec->irqaddr[0] & ec->irqmask; | |
| } | |
| static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr) | |
| { | |
| panic("ecard_def_fiq_enable called - impossible"); | |
| } | |
| static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr) | |
| { | |
| panic("ecard_def_fiq_disable called - impossible"); | |
| } | |
| static int ecard_def_fiq_pending(ecard_t *ec) | |
| { | |
| return !ec->fiqmask || ec->fiqaddr[0] & ec->fiqmask; | |
| } | |
| static expansioncard_ops_t ecard_default_ops = { | |
| ecard_def_irq_enable, | |
| ecard_def_irq_disable, | |
| ecard_def_irq_pending, | |
| ecard_def_fiq_enable, | |
| ecard_def_fiq_disable, | |
| ecard_def_fiq_pending | |
| }; | |
| /* | |
| * Enable and disable interrupts from expansion cards. | |
| * (interrupts are disabled for these functions). | |
| * | |
| * They are not meant to be called directly, but via enable/disable_irq. | |
| */ | |
| static void ecard_irq_unmask(unsigned int irqnr) | |
| { | |
| ecard_t *ec = slot_to_ecard(irqnr - 32); | |
| if (ec) { | |
| if (!ec->ops) | |
| ec->ops = &ecard_default_ops; | |
| if (ec->claimed && ec->ops->irqenable) | |
| ec->ops->irqenable(ec, irqnr); | |
| else | |
| printk(KERN_ERR "ecard: rejecting request to " | |
| "enable IRQs for %d\n", irqnr); | |
| } | |
| } | |
| static void ecard_irq_mask(unsigned int irqnr) | |
| { | |
| ecard_t *ec = slot_to_ecard(irqnr - 32); | |
| if (ec) { | |
| if (!ec->ops) | |
| ec->ops = &ecard_default_ops; | |
| if (ec->ops && ec->ops->irqdisable) | |
| ec->ops->irqdisable(ec, irqnr); | |
| } | |
| } | |
| static struct irqchip ecard_chip = { | |
| .ack = ecard_irq_mask, | |
| .mask = ecard_irq_mask, | |
| .unmask = ecard_irq_unmask, | |
| }; | |
| void ecard_enablefiq(unsigned int fiqnr) | |
| { | |
| ecard_t *ec = slot_to_ecard(fiqnr); | |
| if (ec) { | |
| if (!ec->ops) | |
| ec->ops = &ecard_default_ops; | |
| if (ec->claimed && ec->ops->fiqenable) | |
| ec->ops->fiqenable(ec, fiqnr); | |
| else | |
| printk(KERN_ERR "ecard: rejecting request to " | |
| "enable FIQs for %d\n", fiqnr); | |
| } | |
| } | |
| void ecard_disablefiq(unsigned int fiqnr) | |
| { | |
| ecard_t *ec = slot_to_ecard(fiqnr); | |
| if (ec) { | |
| if (!ec->ops) | |
| ec->ops = &ecard_default_ops; | |
| if (ec->ops->fiqdisable) | |
| ec->ops->fiqdisable(ec, fiqnr); | |
| } | |
| } | |
| static void | |
| ecard_dump_irq_state(ecard_t *ec) | |
| { | |
| printk(" %d: %sclaimed, ", | |
| ec->slot_no, | |
| ec->claimed ? "" : "not "); | |
| if (ec->ops && ec->ops->irqpending && | |
| ec->ops != &ecard_default_ops) | |
| printk("irq %spending\n", | |
| ec->ops->irqpending(ec) ? "" : "not "); | |
| else | |
| printk("irqaddr %p, mask = %02X, status = %02X\n", | |
| ec->irqaddr, ec->irqmask, *ec->irqaddr); | |
| } | |
| static void ecard_check_lockup(struct irqdesc *desc) | |
| { | |
| static int last, lockup; | |
| ecard_t *ec; | |
| /* | |
| * If the timer interrupt has not run since the last million | |
| * unrecognised expansion card interrupts, then there is | |
| * something seriously wrong. Disable the expansion card | |
| * interrupts so at least we can continue. | |
| * | |
| * Maybe we ought to start a timer to re-enable them some time | |
| * later? | |
| */ | |
| if (last == jiffies) { | |
| lockup += 1; | |
| if (lockup > 1000000) { | |
| printk(KERN_ERR "\nInterrupt lockup detected - " | |
| "disabling all expansion card interrupts\n"); | |
| desc->chip->mask(IRQ_EXPANSIONCARD); | |
| printk("Expansion card IRQ state:\n"); | |
| for (ec = cards; ec; ec = ec->next) | |
| ecard_dump_irq_state(ec); | |
| } | |
| } else | |
| lockup = 0; | |
| /* | |
| * If we did not recognise the source of this interrupt, | |
| * warn the user, but don't flood the user with these messages. | |
| */ | |
| if (!last || time_after(jiffies, (unsigned long)(last + 5*HZ))) { | |
| last = jiffies; | |
| printk(KERN_WARNING "Unrecognised interrupt from backplane\n"); | |
| } | |
| } | |
| static void | |
| ecard_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) | |
| { | |
| ecard_t *ec; | |
| int called = 0; | |
| desc->chip->mask(irq); | |
| for (ec = cards; ec; ec = ec->next) { | |
| int pending; | |
| if (!ec->claimed || ec->irq == NO_IRQ) | |
| continue; | |
| if (ec->ops && ec->ops->irqpending) | |
| pending = ec->ops->irqpending(ec); | |
| else | |
| pending = ecard_default_ops.irqpending(ec); | |
| if (pending) { | |
| struct irqdesc *d = irq_desc + ec->irq; | |
| d->handle(ec->irq, d, regs); | |
| called ++; | |
| } | |
| } | |
| desc->chip->unmask(irq); | |
| if (called == 0) | |
| ecard_check_lockup(desc); | |
| } | |
| #define ecard_irqexp_handler NULL | |
| #define ecard_probeirqhw() (0) | |
| unsigned int ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) | |
| { | |
| unsigned long address = 0; | |
| int slot = ec->slot_no; | |
| ectcr &= ~(1 << slot); | |
| switch (type) { | |
| case ECARD_MEMC: | |
| address = IO_EC_MEMC_BASE + (slot << 12); | |
| break; | |
| case ECARD_IOC: | |
| address = IO_EC_IOC_BASE + (slot << 12) + (speed << 17); | |
| break; | |
| default: | |
| break; | |
| } | |
| return address; | |
| } | |
| static int ecard_prints(char *buffer, ecard_t *ec) | |
| { | |
| char *start = buffer; | |
| buffer += sprintf(buffer, " %d: ", ec->slot_no); | |
| if (ec->cid.id == 0) { | |
| struct in_chunk_dir incd; | |
| buffer += sprintf(buffer, "[%04X:%04X] ", | |
| ec->cid.manufacturer, ec->cid.product); | |
| if (!ec->card_desc && ec->cid.cd && | |
| ecard_readchunk(&incd, ec, 0xf5, 0)) { | |
| ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL); | |
| if (ec->card_desc) | |
| strcpy((char *)ec->card_desc, incd.d.string); | |
| } | |
| buffer += sprintf(buffer, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*"); | |
| } else | |
| buffer += sprintf(buffer, "Simple card %d\n", ec->cid.id); | |
| return buffer - start; | |
| } | |
| static int get_ecard_dev_info(char *buf, char **start, off_t pos, int count) | |
| { | |
| ecard_t *ec = cards; | |
| off_t at = 0; | |
| int len, cnt; | |
| cnt = 0; | |
| while (ec && count > cnt) { | |
| len = ecard_prints(buf, ec); | |
| at += len; | |
| if (at >= pos) { | |
| if (!*start) { | |
| *start = buf + (pos - (at - len)); | |
| cnt = at - pos; | |
| } else | |
| cnt += len; | |
| buf += len; | |
| } | |
| ec = ec->next; | |
| } | |
| return (count > cnt) ? cnt : count; | |
| } | |
| static struct proc_dir_entry *proc_bus_ecard_dir = NULL; | |
| static void ecard_proc_init(void) | |
| { | |
| proc_bus_ecard_dir = proc_mkdir("ecard", proc_bus); | |
| create_proc_info_entry("devices", 0, proc_bus_ecard_dir, | |
| get_ecard_dev_info); | |
| } | |
| #define ec_set_resource(ec,nr,st,sz,flg) \ | |
| do { \ | |
| (ec)->resource[nr].name = ec->dev.bus_id; \ | |
| (ec)->resource[nr].start = st; \ | |
| (ec)->resource[nr].end = (st) + (sz) - 1; \ | |
| (ec)->resource[nr].flags = flg; \ | |
| } while (0) | |
| static void __init ecard_init_resources(struct expansion_card *ec) | |
| { | |
| unsigned long base = PODSLOT_IOC0_BASE; | |
| unsigned int slot = ec->slot_no; | |
| int i; | |
| ec_set_resource(ec, ECARD_RES_MEMC, | |
| PODSLOT_MEMC_BASE + (slot << 14), | |
| PODSLOT_MEMC_SIZE, IORESOURCE_MEM); | |
| for (i = 0; i < ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++) { | |
| ec_set_resource(ec, i + ECARD_RES_IOCSLOW, | |
| base + (slot << 14) + (i << 19), | |
| PODSLOT_IOC_SIZE, IORESOURCE_MEM); | |
| } | |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) { | |
| if (ec->resource[i].start && | |
| request_resource(&iomem_resource, &ec->resource[i])) { | |
| printk(KERN_ERR "%s: resource(s) not available\n", | |
| ec->dev.bus_id); | |
| ec->resource[i].end -= ec->resource[i].start; | |
| ec->resource[i].start = 0; | |
| } | |
| } | |
| } | |
| static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| return sprintf(buf, "%u\n", ec->irq); | |
| } | |
| static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| return sprintf(buf, "%u\n", ec->cid.manufacturer); | |
| } | |
| static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| return sprintf(buf, "%u\n", ec->cid.product); | |
| } | |
| static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| return sprintf(buf, "%u\n", ec->dma); | |
| } | |
| static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| char *str = buf; | |
| int i; | |
| for (i = 0; i < ECARD_NUM_RESOURCES; i++) | |
| str += sprintf(str, "%08lx %08lx %08lx\n", | |
| ec->resource[i].start, | |
| ec->resource[i].end, | |
| ec->resource[i].flags); | |
| return str - buf; | |
| } | |
| static DEVICE_ATTR(irq, S_IRUGO, ecard_show_irq, NULL); | |
| static DEVICE_ATTR(vendor, S_IRUGO, ecard_show_vendor, NULL); | |
| static DEVICE_ATTR(device, S_IRUGO, ecard_show_device, NULL); | |
| static DEVICE_ATTR(dma, S_IRUGO, ecard_show_dma, NULL); | |
| static DEVICE_ATTR(resource, S_IRUGO, ecard_show_resources, NULL); | |
| /* | |
| * Probe for an expansion card. | |
| * | |
| * If bit 1 of the first byte of the card is set, then the | |
| * card does not exist. | |
| */ | |
| static int __init | |
| ecard_probe(int slot, card_type_t type) | |
| { | |
| ecard_t **ecp; | |
| ecard_t *ec; | |
| struct ex_ecid cid; | |
| int i, rc = -ENOMEM; | |
| ec = kmalloc(sizeof(ecard_t), GFP_KERNEL); | |
| if (!ec) | |
| goto nomem; | |
| memset(ec, 0, sizeof(ecard_t)); | |
| ec->slot_no = slot; | |
| ec->type = type; | |
| ec->irq = NO_IRQ; | |
| ec->fiq = NO_IRQ; | |
| ec->dma = NO_DMA; | |
| ec->card_desc = NULL; | |
| ec->ops = &ecard_default_ops; | |
| rc = -ENODEV; | |
| if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0) | |
| goto nodev; | |
| cid.r_zero = 1; | |
| ecard_readbytes(&cid, ec, 0, 16, 0); | |
| if (cid.r_zero) | |
| goto nodev; | |
| ec->cid.id = cid.r_id; | |
| ec->cid.cd = cid.r_cd; | |
| ec->cid.is = cid.r_is; | |
| ec->cid.w = cid.r_w; | |
| ec->cid.manufacturer = ecard_getu16(cid.r_manu); | |
| ec->cid.product = ecard_getu16(cid.r_prod); | |
| ec->cid.country = cid.r_country; | |
| ec->cid.irqmask = cid.r_irqmask; | |
| ec->cid.irqoff = ecard_gets24(cid.r_irqoff); | |
| ec->cid.fiqmask = cid.r_fiqmask; | |
| ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff); | |
| ec->fiqaddr = | |
| ec->irqaddr = (unsigned char *)ioaddr(ec->podaddr); | |
| if (ec->cid.is) { | |
| ec->irqmask = ec->cid.irqmask; | |
| ec->irqaddr += ec->cid.irqoff; | |
| ec->fiqmask = ec->cid.fiqmask; | |
| ec->fiqaddr += ec->cid.fiqoff; | |
| } else { | |
| ec->irqmask = 1; | |
| ec->fiqmask = 4; | |
| } | |
| for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++) | |
| if (blacklist[i].manufacturer == ec->cid.manufacturer && | |
| blacklist[i].product == ec->cid.product) { | |
| ec->card_desc = blacklist[i].type; | |
| break; | |
| } | |
| snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot); | |
| ec->dev.parent = NULL; | |
| ec->dev.bus = &ecard_bus_type; | |
| ec->dev.dma_mask = &ec->dma_mask; | |
| ec->dma_mask = (u64)0xffffffff; | |
| ecard_init_resources(ec); | |
| /* | |
| * hook the interrupt handlers | |
| */ | |
| ec->irq = 32 + slot; | |
| set_irq_chip(ec->irq, &ecard_chip); | |
| set_irq_handler(ec->irq, do_level_IRQ); | |
| set_irq_flags(ec->irq, IRQF_VALID); | |
| for (ecp = &cards; *ecp; ecp = &(*ecp)->next); | |
| *ecp = ec; | |
| slot_to_expcard[slot] = ec; | |
| device_register(&ec->dev); | |
| device_create_file(&ec->dev, &dev_attr_dma); | |
| device_create_file(&ec->dev, &dev_attr_irq); | |
| device_create_file(&ec->dev, &dev_attr_resource); | |
| device_create_file(&ec->dev, &dev_attr_vendor); | |
| device_create_file(&ec->dev, &dev_attr_device); | |
| return 0; | |
| nodev: | |
| kfree(ec); | |
| nomem: | |
| return rc; | |
| } | |
| /* | |
| * Initialise the expansion card system. | |
| * Locate all hardware - interrupt management and | |
| * actual cards. | |
| */ | |
| static int __init ecard_init(void) | |
| { | |
| int slot, irqhw; | |
| printk("Probing expansion cards\n"); | |
| for (slot = 0; slot < MAX_ECARDS; slot ++) { | |
| ecard_probe(slot, ECARD_IOC); | |
| } | |
| irqhw = ecard_probeirqhw(); | |
| set_irq_chained_handler(IRQ_EXPANSIONCARD, | |
| irqhw ? ecard_irqexp_handler : ecard_irq_handler); | |
| ecard_proc_init(); | |
| return 0; | |
| } | |
| subsys_initcall(ecard_init); | |
| /* | |
| * ECARD "bus" | |
| */ | |
| static const struct ecard_id * | |
| ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec) | |
| { | |
| int i; | |
| for (i = 0; ids[i].manufacturer != 65535; i++) | |
| if (ec->cid.manufacturer == ids[i].manufacturer && | |
| ec->cid.product == ids[i].product) | |
| return ids + i; | |
| return NULL; | |
| } | |
| static int ecard_drv_probe(struct device *dev) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| struct ecard_driver *drv = ECARD_DRV(dev->driver); | |
| const struct ecard_id *id; | |
| int ret; | |
| id = ecard_match_device(drv->id_table, ec); | |
| ecard_claim(ec); | |
| ret = drv->probe(ec, id); | |
| if (ret) | |
| ecard_release(ec); | |
| return ret; | |
| } | |
| static int ecard_drv_remove(struct device *dev) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| struct ecard_driver *drv = ECARD_DRV(dev->driver); | |
| drv->remove(ec); | |
| ecard_release(ec); | |
| return 0; | |
| } | |
| /* | |
| * Before rebooting, we must make sure that the expansion card is in a | |
| * sensible state, so it can be re-detected. This means that the first | |
| * page of the ROM must be visible. We call the expansion cards reset | |
| * handler, if any. | |
| */ | |
| static void ecard_drv_shutdown(struct device *dev) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(dev); | |
| struct ecard_driver *drv = ECARD_DRV(dev->driver); | |
| struct ecard_request req; | |
| if (drv->shutdown) | |
| drv->shutdown(ec); | |
| ecard_release(ec); | |
| req.req = req_reset; | |
| req.ec = ec; | |
| ecard_call(&req); | |
| } | |
| int ecard_register_driver(struct ecard_driver *drv) | |
| { | |
| drv->drv.bus = &ecard_bus_type; | |
| drv->drv.probe = ecard_drv_probe; | |
| drv->drv.remove = ecard_drv_remove; | |
| drv->drv.shutdown = ecard_drv_shutdown; | |
| return driver_register(&drv->drv); | |
| } | |
| void ecard_remove_driver(struct ecard_driver *drv) | |
| { | |
| driver_unregister(&drv->drv); | |
| } | |
| static int ecard_match(struct device *_dev, struct device_driver *_drv) | |
| { | |
| struct expansion_card *ec = ECARD_DEV(_dev); | |
| struct ecard_driver *drv = ECARD_DRV(_drv); | |
| int ret; | |
| if (drv->id_table) { | |
| ret = ecard_match_device(drv->id_table, ec) != NULL; | |
| } else { | |
| ret = ec->cid.id == drv->id; | |
| } | |
| return ret; | |
| } | |
| struct bus_type ecard_bus_type = { | |
| .name = "ecard", | |
| .match = ecard_match, | |
| }; | |
| static int ecard_bus_init(void) | |
| { | |
| return bus_register(&ecard_bus_type); | |
| } | |
| postcore_initcall(ecard_bus_init); | |
| EXPORT_SYMBOL(ecard_readchunk); | |
| EXPORT_SYMBOL(ecard_address); | |
| EXPORT_SYMBOL(ecard_register_driver); | |
| EXPORT_SYMBOL(ecard_remove_driver); | |
| EXPORT_SYMBOL(ecard_bus_type); |