| /* | |
| * Copyright (C) 2004-2006 Atmel Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #undef DEBUG | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/errno.h> | |
| #include <linux/user.h> | |
| #include <linux/security.h> | |
| #include <linux/unistd.h> | |
| #include <linux/notifier.h> | |
| #include <asm/traps.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/ocd.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/kdebug.h> | |
| static struct pt_regs *get_user_regs(struct task_struct *tsk) | |
| { | |
| return (struct pt_regs *)((unsigned long) tsk->thread_info + | |
| THREAD_SIZE - sizeof(struct pt_regs)); | |
| } | |
| static void ptrace_single_step(struct task_struct *tsk) | |
| { | |
| pr_debug("ptrace_single_step: pid=%u, SR=0x%08lx\n", | |
| tsk->pid, tsk->thread.cpu_context.sr); | |
| if (!(tsk->thread.cpu_context.sr & SR_D)) { | |
| /* | |
| * Set a breakpoint at the current pc to force the | |
| * process into debug mode. The syscall/exception | |
| * exit code will set a breakpoint at the return | |
| * address when this flag is set. | |
| */ | |
| pr_debug("ptrace_single_step: Setting TIF_BREAKPOINT\n"); | |
| set_tsk_thread_flag(tsk, TIF_BREAKPOINT); | |
| } | |
| /* The monitor code will do the actual step for us */ | |
| set_tsk_thread_flag(tsk, TIF_SINGLE_STEP); | |
| } | |
| /* | |
| * Called by kernel/ptrace.c when detaching | |
| * | |
| * Make sure any single step bits, etc. are not set | |
| */ | |
| void ptrace_disable(struct task_struct *child) | |
| { | |
| clear_tsk_thread_flag(child, TIF_SINGLE_STEP); | |
| } | |
| /* | |
| * Handle hitting a breakpoint | |
| */ | |
| static void ptrace_break(struct task_struct *tsk, struct pt_regs *regs) | |
| { | |
| siginfo_t info; | |
| info.si_signo = SIGTRAP; | |
| info.si_errno = 0; | |
| info.si_code = TRAP_BRKPT; | |
| info.si_addr = (void __user *)instruction_pointer(regs); | |
| pr_debug("ptrace_break: Sending SIGTRAP to PID %u (pc = 0x%p)\n", | |
| tsk->pid, info.si_addr); | |
| force_sig_info(SIGTRAP, &info, tsk); | |
| } | |
| /* | |
| * Read the word at offset "offset" into the task's "struct user". We | |
| * actually access the pt_regs struct stored on the kernel stack. | |
| */ | |
| static int ptrace_read_user(struct task_struct *tsk, unsigned long offset, | |
| unsigned long __user *data) | |
| { | |
| unsigned long *regs; | |
| unsigned long value; | |
| pr_debug("ptrace_read_user(%p, %#lx, %p)\n", | |
| tsk, offset, data); | |
| if (offset & 3 || offset >= sizeof(struct user)) { | |
| printk("ptrace_read_user: invalid offset 0x%08lx\n", offset); | |
| return -EIO; | |
| } | |
| regs = (unsigned long *)get_user_regs(tsk); | |
| value = 0; | |
| if (offset < sizeof(struct pt_regs)) | |
| value = regs[offset / sizeof(regs[0])]; | |
| return put_user(value, data); | |
| } | |
| /* | |
| * Write the word "value" to offset "offset" into the task's "struct | |
| * user". We actually access the pt_regs struct stored on the kernel | |
| * stack. | |
| */ | |
| static int ptrace_write_user(struct task_struct *tsk, unsigned long offset, | |
| unsigned long value) | |
| { | |
| unsigned long *regs; | |
| if (offset & 3 || offset >= sizeof(struct user)) { | |
| printk("ptrace_write_user: invalid offset 0x%08lx\n", offset); | |
| return -EIO; | |
| } | |
| if (offset >= sizeof(struct pt_regs)) | |
| return 0; | |
| regs = (unsigned long *)get_user_regs(tsk); | |
| regs[offset / sizeof(regs[0])] = value; | |
| return 0; | |
| } | |
| static int ptrace_getregs(struct task_struct *tsk, void __user *uregs) | |
| { | |
| struct pt_regs *regs = get_user_regs(tsk); | |
| return copy_to_user(uregs, regs, sizeof(*regs)) ? -EFAULT : 0; | |
| } | |
| static int ptrace_setregs(struct task_struct *tsk, const void __user *uregs) | |
| { | |
| struct pt_regs newregs; | |
| int ret; | |
| ret = -EFAULT; | |
| if (copy_from_user(&newregs, uregs, sizeof(newregs)) == 0) { | |
| struct pt_regs *regs = get_user_regs(tsk); | |
| ret = -EINVAL; | |
| if (valid_user_regs(&newregs)) { | |
| *regs = newregs; | |
| ret = 0; | |
| } | |
| } | |
| return ret; | |
| } | |
| long arch_ptrace(struct task_struct *child, long request, long addr, long data) | |
| { | |
| unsigned long tmp; | |
| int ret; | |
| pr_debug("arch_ptrace(%ld, %d, %#lx, %#lx)\n", | |
| request, child->pid, addr, data); | |
| pr_debug("ptrace: Enabling monitor mode...\n"); | |
| __mtdr(DBGREG_DC, __mfdr(DBGREG_DC) | DC_MM | DC_DBE); | |
| switch (request) { | |
| /* Read the word at location addr in the child process */ | |
| case PTRACE_PEEKTEXT: | |
| case PTRACE_PEEKDATA: | |
| ret = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); | |
| if (ret == sizeof(tmp)) | |
| ret = put_user(tmp, (unsigned long __user *)data); | |
| else | |
| ret = -EIO; | |
| break; | |
| case PTRACE_PEEKUSR: | |
| ret = ptrace_read_user(child, addr, | |
| (unsigned long __user *)data); | |
| break; | |
| /* Write the word in data at location addr */ | |
| case PTRACE_POKETEXT: | |
| case PTRACE_POKEDATA: | |
| ret = access_process_vm(child, addr, &data, sizeof(data), 1); | |
| if (ret == sizeof(data)) | |
| ret = 0; | |
| else | |
| ret = -EIO; | |
| break; | |
| case PTRACE_POKEUSR: | |
| ret = ptrace_write_user(child, addr, data); | |
| break; | |
| /* continue and stop at next (return from) syscall */ | |
| case PTRACE_SYSCALL: | |
| /* restart after signal */ | |
| case PTRACE_CONT: | |
| ret = -EIO; | |
| if (!valid_signal(data)) | |
| break; | |
| if (request == PTRACE_SYSCALL) | |
| set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | |
| else | |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | |
| child->exit_code = data; | |
| /* XXX: Are we sure no breakpoints are active here? */ | |
| wake_up_process(child); | |
| ret = 0; | |
| break; | |
| /* | |
| * Make the child exit. Best I can do is send it a | |
| * SIGKILL. Perhaps it should be put in the status that it | |
| * wants to exit. | |
| */ | |
| case PTRACE_KILL: | |
| ret = 0; | |
| if (child->exit_state == EXIT_ZOMBIE) | |
| break; | |
| child->exit_code = SIGKILL; | |
| wake_up_process(child); | |
| break; | |
| /* | |
| * execute single instruction. | |
| */ | |
| case PTRACE_SINGLESTEP: | |
| ret = -EIO; | |
| if (!valid_signal(data)) | |
| break; | |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); | |
| ptrace_single_step(child); | |
| child->exit_code = data; | |
| wake_up_process(child); | |
| ret = 0; | |
| break; | |
| /* Detach a process that was attached */ | |
| case PTRACE_DETACH: | |
| ret = ptrace_detach(child, data); | |
| break; | |
| case PTRACE_GETREGS: | |
| ret = ptrace_getregs(child, (void __user *)data); | |
| break; | |
| case PTRACE_SETREGS: | |
| ret = ptrace_setregs(child, (const void __user *)data); | |
| break; | |
| default: | |
| ret = ptrace_request(child, request, addr, data); | |
| break; | |
| } | |
| pr_debug("sys_ptrace returning %d (DC = 0x%08lx)\n", ret, __mfdr(DBGREG_DC)); | |
| return ret; | |
| } | |
| asmlinkage void syscall_trace(void) | |
| { | |
| pr_debug("syscall_trace called\n"); | |
| if (!test_thread_flag(TIF_SYSCALL_TRACE)) | |
| return; | |
| if (!(current->ptrace & PT_PTRACED)) | |
| return; | |
| pr_debug("syscall_trace: notifying parent\n"); | |
| /* The 0x80 provides a way for the tracing parent to | |
| * distinguish between a syscall stop and SIGTRAP delivery */ | |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) | |
| ? 0x80 : 0)); | |
| /* | |
| * this isn't the same as continuing with a signal, but it | |
| * will do for normal use. strace only continues with a | |
| * signal if the stopping signal is not SIGTRAP. -brl | |
| */ | |
| if (current->exit_code) { | |
| pr_debug("syscall_trace: sending signal %d to PID %u\n", | |
| current->exit_code, current->pid); | |
| send_sig(current->exit_code, current, 1); | |
| current->exit_code = 0; | |
| } | |
| } | |
| asmlinkage void do_debug_priv(struct pt_regs *regs) | |
| { | |
| unsigned long dc, ds; | |
| unsigned long die_val; | |
| ds = __mfdr(DBGREG_DS); | |
| pr_debug("do_debug_priv: pc = %08lx, ds = %08lx\n", regs->pc, ds); | |
| if (ds & DS_SSS) | |
| die_val = DIE_SSTEP; | |
| else | |
| die_val = DIE_BREAKPOINT; | |
| if (notify_die(die_val, regs, 0, SIGTRAP) == NOTIFY_STOP) | |
| return; | |
| if (likely(ds & DS_SSS)) { | |
| extern void itlb_miss(void); | |
| extern void tlb_miss_common(void); | |
| struct thread_info *ti; | |
| dc = __mfdr(DBGREG_DC); | |
| dc &= ~DC_SS; | |
| __mtdr(DBGREG_DC, dc); | |
| ti = current_thread_info(); | |
| ti->flags |= _TIF_BREAKPOINT; | |
| /* The TLB miss handlers don't check thread flags */ | |
| if ((regs->pc >= (unsigned long)&itlb_miss) | |
| && (regs->pc <= (unsigned long)&tlb_miss_common)) { | |
| __mtdr(DBGREG_BWA2A, sysreg_read(RAR_EX)); | |
| __mtdr(DBGREG_BWC2A, 0x40000001 | (get_asid() << 1)); | |
| } | |
| /* | |
| * If we're running in supervisor mode, the breakpoint | |
| * will take us where we want directly, no need to | |
| * single step. | |
| */ | |
| if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR) | |
| ti->flags |= TIF_SINGLE_STEP; | |
| } else { | |
| panic("Unable to handle debug trap at pc = %08lx\n", | |
| regs->pc); | |
| } | |
| } | |
| /* | |
| * Handle breakpoints, single steps and other debuggy things. To keep | |
| * things simple initially, we run with interrupts and exceptions | |
| * disabled all the time. | |
| */ | |
| asmlinkage void do_debug(struct pt_regs *regs) | |
| { | |
| unsigned long dc, ds; | |
| ds = __mfdr(DBGREG_DS); | |
| pr_debug("do_debug: pc = %08lx, ds = %08lx\n", regs->pc, ds); | |
| if (test_thread_flag(TIF_BREAKPOINT)) { | |
| pr_debug("TIF_BREAKPOINT set\n"); | |
| /* We're taking care of it */ | |
| clear_thread_flag(TIF_BREAKPOINT); | |
| __mtdr(DBGREG_BWC2A, 0); | |
| } | |
| if (test_thread_flag(TIF_SINGLE_STEP)) { | |
| pr_debug("TIF_SINGLE_STEP set, ds = 0x%08lx\n", ds); | |
| if (ds & DS_SSS) { | |
| dc = __mfdr(DBGREG_DC); | |
| dc &= ~DC_SS; | |
| __mtdr(DBGREG_DC, dc); | |
| clear_thread_flag(TIF_SINGLE_STEP); | |
| ptrace_break(current, regs); | |
| } | |
| } else { | |
| /* regular breakpoint */ | |
| ptrace_break(current, regs); | |
| } | |
| } |