| /* | |
| * Physical mapping layer for MTD using the Axis partitiontable format | |
| * | |
| * Copyright (c) 2001, 2002 Axis Communications AB | |
| * | |
| * This file is under the GPL. | |
| * | |
| * First partition is always sector 0 regardless of if we find a partitiontable | |
| * or not. In the start of the next sector, there can be a partitiontable that | |
| * tells us what other partitions to define. If there isn't, we use a default | |
| * partition split defined below. | |
| * | |
| * $Log: axisflashmap.c,v $ | |
| * Revision 1.11 2004/11/15 10:27:14 starvik | |
| * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>). | |
| * | |
| * Revision 1.10 2004/08/16 12:37:22 starvik | |
| * Merge of Linux 2.6.8 | |
| * | |
| * Revision 1.8 2004/05/14 07:58:03 starvik | |
| * Merge of changes from 2.4 | |
| * | |
| * Revision 1.6 2003/07/04 08:27:37 starvik | |
| * Merge of Linux 2.5.74 | |
| * | |
| * Revision 1.5 2002/12/11 13:13:57 starvik | |
| * Added arch/ to v10 specific includes | |
| * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) | |
| * | |
| * Revision 1.4 2002/11/20 11:56:10 starvik | |
| * Merge of Linux 2.5.48 | |
| * | |
| * Revision 1.3 2002/11/13 14:54:13 starvik | |
| * Copied from linux 2.4 | |
| * | |
| * Revision 1.28 2002/10/01 08:08:43 jonashg | |
| * The first partition ends at the start of the partition table. | |
| * | |
| * Revision 1.27 2002/08/21 09:23:13 jonashg | |
| * Speling. | |
| * | |
| * Revision 1.26 2002/08/21 08:35:20 jonashg | |
| * Cosmetic change to printouts. | |
| * | |
| * Revision 1.25 2002/08/21 08:15:42 jonashg | |
| * Made it compile even without CONFIG_MTD_CONCAT defined. | |
| * | |
| * Revision 1.24 2002/08/20 13:12:35 jonashg | |
| * * New approach to probing. Probe cse0 and cse1 separately and (mtd)concat | |
| * the results. | |
| * * Removed compile time tests concerning how the mtdram driver has been | |
| * configured. The user will know about the misconfiguration at runtime | |
| * instead. (The old approach made it impossible to use mtdram for anything | |
| * else than RAM boot). | |
| * | |
| * Revision 1.23 2002/05/13 12:12:28 johana | |
| * Allow compile without CONFIG_MTD_MTDRAM but warn at compiletime and | |
| * be informative at runtime. | |
| * | |
| * Revision 1.22 2002/05/13 10:24:44 johana | |
| * Added #if checks on MTDRAM CONFIG | |
| * | |
| * Revision 1.21 2002/05/06 16:05:20 johana | |
| * Removed debug printout. | |
| * | |
| * Revision 1.20 2002/05/06 16:03:00 johana | |
| * No more cramfs as root hack in generic code. | |
| * It's handled by axisflashmap using mtdram. | |
| * | |
| * Revision 1.19 2002/03/15 17:10:28 bjornw | |
| * Changed comment about cached access since we changed this before | |
| * | |
| * Revision 1.18 2002/03/05 17:06:15 jonashg | |
| * Try amd_flash probe before cfi_probe since amd_flash driver can handle two | |
| * (or more) flash chips of different model and the cfi driver cannot. | |
| * | |
| * Revision 1.17 2001/11/12 19:42:38 pkj | |
| * Fixed compiler warnings. | |
| * | |
| * Revision 1.16 2001/11/08 11:18:58 jonashg | |
| * Always read from uncached address to avoid problems with flushing | |
| * cachelines after write and MTD-erase. No performance loss have been | |
| * seen yet. | |
| * | |
| * Revision 1.15 2001/10/19 12:41:04 jonashg | |
| * Name of probe has changed in MTD. | |
| * | |
| * Revision 1.14 2001/09/21 07:14:10 jonashg | |
| * Made root filesystem (cramfs) use mtdblock driver when booting from flash. | |
| * | |
| * Revision 1.13 2001/08/15 13:57:35 jonashg | |
| * Entire MTD updated to the linux 2.4.7 version. | |
| * | |
| * Revision 1.12 2001/06/11 09:50:30 jonashg | |
| * Oops, 2MB is 0x200000 bytes. | |
| * | |
| * Revision 1.11 2001/06/08 11:39:44 jonashg | |
| * Changed sizes and offsets in axis_default_partitions to use | |
| * CONFIG_ETRAX_PTABLE_SECTOR. | |
| * | |
| * Revision 1.10 2001/05/29 09:42:03 jonashg | |
| * Use macro for end marker length instead of sizeof. | |
| * | |
| * Revision 1.9 2001/05/29 08:52:52 jonashg | |
| * Gave names to the magic fours (size of the ptable end marker). | |
| * | |
| * Revision 1.8 2001/05/28 15:36:20 jonashg | |
| * * Removed old comment about ptable location in flash (it's a CONFIG_ option). | |
| * * Variable ptable was initialized twice to the same value. | |
| * | |
| * Revision 1.7 2001/04/05 13:41:46 markusl | |
| * Updated according to review remarks | |
| * | |
| * Revision 1.6 2001/03/07 09:21:21 bjornw | |
| * No need to waste .data | |
| * | |
| * Revision 1.5 2001/03/06 16:27:01 jonashg | |
| * Probe the entire flash area for flash devices. | |
| * | |
| * Revision 1.4 2001/02/23 12:47:15 bjornw | |
| * Uncached flash in LOW_MAP moved from 0xe to 0x8 | |
| * | |
| * Revision 1.3 2001/02/16 12:11:45 jonashg | |
| * MTD driver amd_flash is now included in MTD CVS repository. | |
| * (It's now in drivers/mtd). | |
| * | |
| * Revision 1.2 2001/02/09 11:12:22 jonashg | |
| * Support for AMD compatible non-CFI flash chips. | |
| * Only tested with Toshiba TC58FVT160 so far. | |
| * | |
| * Revision 1.1 2001/01/12 17:01:18 bjornw | |
| * * Added axisflashmap.c, a physical mapping for MTD that reads and understands | |
| * Axis partition-table format. | |
| * | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/mtd/concat.h> | |
| #include <linux/mtd/map.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/mtdram.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <asm/axisflashmap.h> | |
| #include <asm/mmu.h> | |
| #include <asm/arch/sv_addr_ag.h> | |
| #ifdef CONFIG_CRIS_LOW_MAP | |
| #define FLASH_UNCACHED_ADDR KSEG_8 | |
| #define FLASH_CACHED_ADDR KSEG_5 | |
| #else | |
| #define FLASH_UNCACHED_ADDR KSEG_E | |
| #define FLASH_CACHED_ADDR KSEG_F | |
| #endif | |
| #if CONFIG_ETRAX_FLASH_BUSWIDTH==1 | |
| #define flash_data __u8 | |
| #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 | |
| #define flash_data __u16 | |
| #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 | |
| #define flash_data __u32 | |
| #endif | |
| /* From head.S */ | |
| extern unsigned long romfs_start, romfs_length, romfs_in_flash; | |
| /* The master mtd for the entire flash. */ | |
| struct mtd_info* axisflash_mtd = NULL; | |
| /* Map driver functions. */ | |
| static map_word flash_read(struct map_info *map, unsigned long ofs) | |
| { | |
| map_word tmp; | |
| tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs); | |
| return tmp; | |
| } | |
| static void flash_copy_from(struct map_info *map, void *to, | |
| unsigned long from, ssize_t len) | |
| { | |
| memcpy(to, (void *)(map->map_priv_1 + from), len); | |
| } | |
| static void flash_write(struct map_info *map, map_word d, unsigned long adr) | |
| { | |
| *(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0]; | |
| } | |
| /* | |
| * The map for chip select e0. | |
| * | |
| * We run into tricky coherence situations if we mix cached with uncached | |
| * accesses to we only use the uncached version here. | |
| * | |
| * The size field is the total size where the flash chips may be mapped on the | |
| * chip select. MTD probes should find all devices there and it does not matter | |
| * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD | |
| * probes will ignore them. | |
| * | |
| * The start address in map_priv_1 is in virtual memory so we cannot use | |
| * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start | |
| * address of cse0. | |
| */ | |
| static struct map_info map_cse0 = { | |
| .name = "cse0", | |
| .size = MEM_CSE0_SIZE, | |
| .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, | |
| .read = flash_read, | |
| .copy_from = flash_copy_from, | |
| .write = flash_write, | |
| .map_priv_1 = FLASH_UNCACHED_ADDR | |
| }; | |
| /* | |
| * The map for chip select e1. | |
| * | |
| * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong | |
| * address, but there isn't. | |
| */ | |
| static struct map_info map_cse1 = { | |
| .name = "cse1", | |
| .size = MEM_CSE1_SIZE, | |
| .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, | |
| .read = flash_read, | |
| .copy_from = flash_copy_from, | |
| .write = flash_write, | |
| .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE | |
| }; | |
| /* If no partition-table was found, we use this default-set. */ | |
| #define MAX_PARTITIONS 7 | |
| #define NUM_DEFAULT_PARTITIONS 3 | |
| /* | |
| * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the | |
| * size of one flash block and "filesystem"-partition needs 5 blocks to be able | |
| * to use JFFS. | |
| */ | |
| static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { | |
| { | |
| .name = "boot firmware", | |
| .size = CONFIG_ETRAX_PTABLE_SECTOR, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "kernel", | |
| .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), | |
| .offset = CONFIG_ETRAX_PTABLE_SECTOR | |
| }, | |
| { | |
| .name = "filesystem", | |
| .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, | |
| .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) | |
| } | |
| }; | |
| /* Initialize the ones normally used. */ | |
| static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { | |
| { | |
| .name = "part0", | |
| .size = CONFIG_ETRAX_PTABLE_SECTOR, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "part1", | |
| .size = 0, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "part2", | |
| .size = 0, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "part3", | |
| .size = 0, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "part4", | |
| .size = 0, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "part5", | |
| .size = 0, | |
| .offset = 0 | |
| }, | |
| { | |
| .name = "part6", | |
| .size = 0, | |
| .offset = 0 | |
| }, | |
| }; | |
| /* | |
| * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash | |
| * chips in that order (because the amd_flash-driver is faster). | |
| */ | |
| static struct mtd_info *probe_cs(struct map_info *map_cs) | |
| { | |
| struct mtd_info *mtd_cs = NULL; | |
| printk(KERN_INFO | |
| "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", | |
| map_cs->name, map_cs->size, map_cs->map_priv_1); | |
| #ifdef CONFIG_MTD_AMDSTD | |
| mtd_cs = do_map_probe("amd_flash", map_cs); | |
| #endif | |
| #ifdef CONFIG_MTD_CFI | |
| if (!mtd_cs) { | |
| mtd_cs = do_map_probe("cfi_probe", map_cs); | |
| } | |
| #endif | |
| return mtd_cs; | |
| } | |
| /* | |
| * Probe each chip select individually for flash chips. If there are chips on | |
| * both cse0 and cse1, the mtd_info structs will be concatenated to one struct | |
| * so that MTD partitions can cross chip boundries. | |
| * | |
| * The only known restriction to how you can mount your chips is that each | |
| * chip select must hold similar flash chips. But you need external hardware | |
| * to do that anyway and you can put totally different chips on cse0 and cse1 | |
| * so it isn't really much of a restriction. | |
| */ | |
| static struct mtd_info *flash_probe(void) | |
| { | |
| struct mtd_info *mtd_cse0; | |
| struct mtd_info *mtd_cse1; | |
| struct mtd_info *mtd_cse; | |
| mtd_cse0 = probe_cs(&map_cse0); | |
| mtd_cse1 = probe_cs(&map_cse1); | |
| if (!mtd_cse0 && !mtd_cse1) { | |
| /* No chip found. */ | |
| return NULL; | |
| } | |
| if (mtd_cse0 && mtd_cse1) { | |
| #ifdef CONFIG_MTD_CONCAT | |
| struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 }; | |
| /* Since the concatenation layer adds a small overhead we | |
| * could try to figure out if the chips in cse0 and cse1 are | |
| * identical and reprobe the whole cse0+cse1 window. But since | |
| * flash chips are slow, the overhead is relatively small. | |
| * So we use the MTD concatenation layer instead of further | |
| * complicating the probing procedure. | |
| */ | |
| mtd_cse = mtd_concat_create(mtds, | |
| sizeof(mtds) / sizeof(mtds[0]), | |
| "cse0+cse1"); | |
| #else | |
| printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " | |
| "(mis)configuration!\n", map_cse0.name, map_cse1.name); | |
| mtd_cse = NULL; | |
| #endif | |
| if (!mtd_cse) { | |
| printk(KERN_ERR "%s and %s: Concatenation failed!\n", | |
| map_cse0.name, map_cse1.name); | |
| /* The best we can do now is to only use what we found | |
| * at cse0. | |
| */ | |
| mtd_cse = mtd_cse0; | |
| map_destroy(mtd_cse1); | |
| } | |
| } else { | |
| mtd_cse = mtd_cse0? mtd_cse0 : mtd_cse1; | |
| } | |
| return mtd_cse; | |
| } | |
| /* | |
| * Probe the flash chip(s) and, if it succeeds, read the partition-table | |
| * and register the partitions with MTD. | |
| */ | |
| static int __init init_axis_flash(void) | |
| { | |
| struct mtd_info *mymtd; | |
| int err = 0; | |
| int pidx = 0; | |
| struct partitiontable_head *ptable_head = NULL; | |
| struct partitiontable_entry *ptable; | |
| int use_default_ptable = 1; /* Until proven otherwise. */ | |
| const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n"; | |
| if (!(mymtd = flash_probe())) { | |
| /* There's no reason to use this module if no flash chip can | |
| * be identified. Make sure that's understood. | |
| */ | |
| printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); | |
| } else { | |
| printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", | |
| mymtd->name, mymtd->size); | |
| axisflash_mtd = mymtd; | |
| } | |
| if (mymtd) { | |
| mymtd->owner = THIS_MODULE; | |
| ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR + | |
| CONFIG_ETRAX_PTABLE_SECTOR + | |
| PARTITION_TABLE_OFFSET); | |
| } | |
| pidx++; /* First partition is always set to the default. */ | |
| if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) | |
| && (ptable_head->size < | |
| (MAX_PARTITIONS * sizeof(struct partitiontable_entry) + | |
| PARTITIONTABLE_END_MARKER_SIZE)) | |
| && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) + | |
| ptable_head->size - | |
| PARTITIONTABLE_END_MARKER_SIZE) | |
| == PARTITIONTABLE_END_MARKER)) { | |
| /* Looks like a start, sane length and end of a | |
| * partition table, lets check csum etc. | |
| */ | |
| int ptable_ok = 0; | |
| struct partitiontable_entry *max_addr = | |
| (struct partitiontable_entry *) | |
| ((unsigned long)ptable_head + sizeof(*ptable_head) + | |
| ptable_head->size); | |
| unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; | |
| unsigned char *p; | |
| unsigned long csum = 0; | |
| ptable = (struct partitiontable_entry *) | |
| ((unsigned long)ptable_head + sizeof(*ptable_head)); | |
| /* Lets be PARANOID, and check the checksum. */ | |
| p = (unsigned char*) ptable; | |
| while (p <= (unsigned char*)max_addr) { | |
| csum += *p++; | |
| csum += *p++; | |
| csum += *p++; | |
| csum += *p++; | |
| } | |
| ptable_ok = (csum == ptable_head->checksum); | |
| /* Read the entries and use/show the info. */ | |
| printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", | |
| (ptable_ok ? " valid" : "n invalid"), ptable_head, | |
| max_addr); | |
| /* We have found a working bootblock. Now read the | |
| * partition table. Scan the table. It ends when | |
| * there is 0xffffffff, that is, empty flash. | |
| */ | |
| while (ptable_ok | |
| && ptable->offset != 0xffffffff | |
| && ptable < max_addr | |
| && pidx < MAX_PARTITIONS) { | |
| axis_partitions[pidx].offset = offset + ptable->offset; | |
| axis_partitions[pidx].size = ptable->size; | |
| printk(pmsg, pidx, axis_partitions[pidx].offset, | |
| axis_partitions[pidx].size); | |
| pidx++; | |
| ptable++; | |
| } | |
| use_default_ptable = !ptable_ok; | |
| } | |
| if (romfs_in_flash) { | |
| /* Add an overlapping device for the root partition (romfs). */ | |
| axis_partitions[pidx].name = "romfs"; | |
| axis_partitions[pidx].size = romfs_length; | |
| axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; | |
| axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; | |
| printk(KERN_INFO | |
| " Adding readonly flash partition for romfs image:\n"); | |
| printk(pmsg, pidx, axis_partitions[pidx].offset, | |
| axis_partitions[pidx].size); | |
| pidx++; | |
| } | |
| if (mymtd) { | |
| if (use_default_ptable) { | |
| printk(KERN_INFO " Using default partition table.\n"); | |
| err = add_mtd_partitions(mymtd, axis_default_partitions, | |
| NUM_DEFAULT_PARTITIONS); | |
| } else { | |
| err = add_mtd_partitions(mymtd, axis_partitions, pidx); | |
| } | |
| if (err) { | |
| panic("axisflashmap could not add MTD partitions!\n"); | |
| } | |
| } | |
| if (!romfs_in_flash) { | |
| /* Create an RAM device for the root partition (romfs). */ | |
| #if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) | |
| /* No use trying to boot this kernel from RAM. Panic! */ | |
| printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " | |
| "device due to kernel (mis)configuration!\n"); | |
| panic("This kernel cannot boot from RAM!\n"); | |
| #else | |
| struct mtd_info *mtd_ram; | |
| mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info), | |
| GFP_KERNEL); | |
| if (!mtd_ram) { | |
| panic("axisflashmap couldn't allocate memory for " | |
| "mtd_info!\n"); | |
| } | |
| printk(KERN_INFO " Adding RAM partition for romfs image:\n"); | |
| printk(pmsg, pidx, romfs_start, romfs_length); | |
| err = mtdram_init_device(mtd_ram, (void*)romfs_start, | |
| romfs_length, "romfs"); | |
| if (err) { | |
| panic("axisflashmap could not initialize MTD RAM " | |
| "device!\n"); | |
| } | |
| #endif | |
| } | |
| return err; | |
| } | |
| /* This adds the above to the kernels init-call chain. */ | |
| module_init(init_axis_flash); | |
| EXPORT_SYMBOL(axisflash_mtd); |