| /* | |
| * linux/arch/cris/mm/fault.c | |
| * | |
| * Copyright (C) 2000, 2001 Axis Communications AB | |
| * | |
| * Authors: Bjorn Wesen | |
| * | |
| * $Log: fault.c,v $ | |
| * Revision 1.20 2005/03/04 08:16:18 starvik | |
| * Merge of Linux 2.6.11. | |
| * | |
| * Revision 1.19 2005/01/14 10:07:59 starvik | |
| * Fixed warning. | |
| * | |
| * Revision 1.18 2005/01/12 08:10:14 starvik | |
| * Readded the change of frametype when handling kernel page fault fixup | |
| * for v10. This is necessary to avoid that the CPU remakes the faulting | |
| * access. | |
| * | |
| * Revision 1.17 2005/01/11 13:53:05 starvik | |
| * Use raw_printk. | |
| * | |
| * Revision 1.16 2004/12/17 11:39:41 starvik | |
| * SMP support. | |
| * | |
| * Revision 1.15 2004/11/23 18:36:18 starvik | |
| * Stack is now non-executable. | |
| * Signal handler trampolines are placed in a reserved page mapped into all | |
| * processes. | |
| * | |
| * Revision 1.14 2004/11/23 07:10:21 starvik | |
| * Moved find_fixup_code to generic code. | |
| * | |
| * Revision 1.13 2004/11/23 07:00:54 starvik | |
| * Actually use the execute permission bit in the MMU. This makes it possible | |
| * to prevent e.g. attacks where executable code is put on the stack. | |
| * | |
| * Revision 1.12 2004/09/29 06:16:04 starvik | |
| * Use instruction_pointer | |
| * | |
| * Revision 1.11 2004/05/14 07:58:05 starvik | |
| * Merge of changes from 2.4 | |
| * | |
| * Revision 1.10 2003/10/27 14:51:24 starvik | |
| * Removed debugcode | |
| * | |
| * Revision 1.9 2003/10/27 14:50:42 starvik | |
| * Changed do_page_fault signature | |
| * | |
| * Revision 1.8 2003/07/04 13:02:48 tobiasa | |
| * Moved code snippet from arch/cris/mm/fault.c that searches for fixup code | |
| * to seperate function in arch-specific files. | |
| * | |
| * Revision 1.7 2003/01/22 06:48:38 starvik | |
| * Fixed warnings issued by GCC 3.2.1 | |
| * | |
| * Revision 1.6 2003/01/09 14:42:52 starvik | |
| * Merge of Linux 2.5.55 | |
| * | |
| * Revision 1.5 2002/12/11 14:44:48 starvik | |
| * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/mm | |
| * | |
| * Revision 1.4 2002/11/13 15:10:28 starvik | |
| * pte_offset has been renamed to pte_offset_kernel | |
| * | |
| * Revision 1.3 2002/11/05 06:45:13 starvik | |
| * Merge of Linux 2.5.45 | |
| * | |
| * Revision 1.2 2001/12/18 13:35:22 bjornw | |
| * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15). | |
| * | |
| * Revision 1.20 2001/11/22 13:34:06 bjornw | |
| * * Bug workaround (LX TR89): force a rerun of the whole of an interrupted | |
| * unaligned write, because the second half of the write will be corrupted | |
| * otherwise. Affected unaligned writes spanning not-yet mapped pages. | |
| * * Optimization: use the wr_rd bit in R_MMU_CAUSE to know whether a miss | |
| * was due to a read or a write (before we didn't know this until the next | |
| * restart of the interrupted instruction, thus wasting one fault-irq) | |
| * | |
| * Revision 1.19 2001/11/12 19:02:10 pkj | |
| * Fixed compiler warnings. | |
| * | |
| * Revision 1.18 2001/07/18 22:14:32 bjornw | |
| * Enable interrupts in the bulk of do_page_fault | |
| * | |
| * Revision 1.17 2001/07/18 13:07:23 bjornw | |
| * * Detect non-existant PTE's in vmalloc pmd synchronization | |
| * * Remove comment about fast-paths for VMALLOC_START etc, because all that | |
| * was totally bogus anyway it turned out :) | |
| * * Fix detection of vmalloc-area synchronization | |
| * * Add some comments | |
| * | |
| * Revision 1.16 2001/06/13 00:06:08 bjornw | |
| * current_pgd should be volatile | |
| * | |
| * Revision 1.15 2001/06/13 00:02:23 bjornw | |
| * Use a separate variable to store the current pgd to avoid races in schedule | |
| * | |
| * Revision 1.14 2001/05/16 17:41:07 hp | |
| * Last comment tweak further tweaked. | |
| * | |
| * Revision 1.13 2001/05/15 00:58:44 hp | |
| * Expand a bit on the comment why we compare address >= TASK_SIZE rather | |
| * than >= VMALLOC_START. | |
| * | |
| * Revision 1.12 2001/04/04 10:51:14 bjornw | |
| * mmap_sem is grabbed for reading | |
| * | |
| * Revision 1.11 2001/03/23 07:36:07 starvik | |
| * Corrected according to review remarks | |
| * | |
| * Revision 1.10 2001/03/21 16:10:11 bjornw | |
| * CRIS_FRAME_FIXUP not needed anymore, use FRAME_NORMAL | |
| * | |
| * Revision 1.9 2001/03/05 13:22:20 bjornw | |
| * Spell-fix and fix in vmalloc_fault handling | |
| * | |
| * Revision 1.8 2000/11/22 14:45:31 bjornw | |
| * * 2.4.0-test10 removed the set_pgdir instantaneous kernel global mapping | |
| * into all processes. Instead we fill in the missing PTE entries on demand. | |
| * | |
| * Revision 1.7 2000/11/21 16:39:09 bjornw | |
| * fixup switches frametype | |
| * | |
| * Revision 1.6 2000/11/17 16:54:08 bjornw | |
| * More detailed siginfo reporting | |
| * | |
| * | |
| */ | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <asm/uaccess.h> | |
| extern int find_fixup_code(struct pt_regs *); | |
| extern void die_if_kernel(const char *, struct pt_regs *, long); | |
| extern int raw_printk(const char *fmt, ...); | |
| /* debug of low-level TLB reload */ | |
| #undef DEBUG | |
| #ifdef DEBUG | |
| #define D(x) x | |
| #else | |
| #define D(x) | |
| #endif | |
| /* debug of higher-level faults */ | |
| #define DPG(x) | |
| /* current active page directory */ | |
| volatile DEFINE_PER_CPU(pgd_t *,current_pgd); | |
| unsigned long cris_signal_return_page; | |
| /* | |
| * This routine handles page faults. It determines the address, | |
| * and the problem, and then passes it off to one of the appropriate | |
| * routines. | |
| * | |
| * Notice that the address we're given is aligned to the page the fault | |
| * occurred in, since we only get the PFN in R_MMU_CAUSE not the complete | |
| * address. | |
| * | |
| * error_code: | |
| * bit 0 == 0 means no page found, 1 means protection fault | |
| * bit 1 == 0 means read, 1 means write | |
| * | |
| * If this routine detects a bad access, it returns 1, otherwise it | |
| * returns 0. | |
| */ | |
| asmlinkage void | |
| do_page_fault(unsigned long address, struct pt_regs *regs, | |
| int protection, int writeaccess) | |
| { | |
| struct task_struct *tsk; | |
| struct mm_struct *mm; | |
| struct vm_area_struct * vma; | |
| siginfo_t info; | |
| D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", | |
| address, smp_processor_id(), instruction_pointer(regs), | |
| protection, writeaccess)); | |
| tsk = current; | |
| /* | |
| * We fault-in kernel-space virtual memory on-demand. The | |
| * 'reference' page table is init_mm.pgd. | |
| * | |
| * NOTE! We MUST NOT take any locks for this case. We may | |
| * be in an interrupt or a critical region, and should | |
| * only copy the information from the master page table, | |
| * nothing more. | |
| * | |
| * NOTE2: This is done so that, when updating the vmalloc | |
| * mappings we don't have to walk all processes pgdirs and | |
| * add the high mappings all at once. Instead we do it as they | |
| * are used. However vmalloc'ed page entries have the PAGE_GLOBAL | |
| * bit set so sometimes the TLB can use a lingering entry. | |
| * | |
| * This verifies that the fault happens in kernel space | |
| * and that the fault was not a protection error (error_code & 1). | |
| */ | |
| if (address >= VMALLOC_START && | |
| !protection && | |
| !user_mode(regs)) | |
| goto vmalloc_fault; | |
| /* When stack execution is not allowed we store the signal | |
| * trampolines in the reserved cris_signal_return_page. | |
| * Handle this in the exact same way as vmalloc (we know | |
| * that the mapping is there and is valid so no need to | |
| * call handle_mm_fault). | |
| */ | |
| if (cris_signal_return_page && | |
| address == cris_signal_return_page && | |
| !protection && user_mode(regs)) | |
| goto vmalloc_fault; | |
| /* we can and should enable interrupts at this point */ | |
| local_irq_enable(); | |
| mm = tsk->mm; | |
| info.si_code = SEGV_MAPERR; | |
| /* | |
| * If we're in an interrupt or have no user | |
| * context, we must not take the fault.. | |
| */ | |
| if (in_interrupt() || !mm) | |
| goto no_context; | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto bad_area; | |
| if (vma->vm_start <= address) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto bad_area; | |
| if (user_mode(regs)) { | |
| /* | |
| * accessing the stack below usp is always a bug. | |
| * we get page-aligned addresses so we can only check | |
| * if we're within a page from usp, but that might be | |
| * enough to catch brutal errors at least. | |
| */ | |
| if (address + PAGE_SIZE < rdusp()) | |
| goto bad_area; | |
| } | |
| if (expand_stack(vma, address)) | |
| goto bad_area; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| info.si_code = SEGV_ACCERR; | |
| /* first do some preliminary protection checks */ | |
| if (writeaccess == 2){ | |
| if (!(vma->vm_flags & VM_EXEC)) | |
| goto bad_area; | |
| } else if (writeaccess == 1) { | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto bad_area; | |
| } else { | |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC))) | |
| goto bad_area; | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| switch (handle_mm_fault(mm, vma, address, writeaccess & 1)) { | |
| case VM_FAULT_MINOR: | |
| tsk->min_flt++; | |
| break; | |
| case VM_FAULT_MAJOR: | |
| tsk->maj_flt++; | |
| break; | |
| case VM_FAULT_SIGBUS: | |
| goto do_sigbus; | |
| default: | |
| goto out_of_memory; | |
| } | |
| up_read(&mm->mmap_sem); | |
| return; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| * Fix it, but check if it's kernel or user first.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| bad_area_nosemaphore: | |
| DPG(show_registers(regs)); | |
| /* User mode accesses just cause a SIGSEGV */ | |
| if (user_mode(regs)) { | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| /* info.si_code has been set above */ | |
| info.si_addr = (void *)address; | |
| force_sig_info(SIGSEGV, &info, tsk); | |
| return; | |
| } | |
| no_context: | |
| /* Are we prepared to handle this kernel fault? | |
| * | |
| * (The kernel has valid exception-points in the source | |
| * when it acesses user-memory. When it fails in one | |
| * of those points, we find it in a table and do a jump | |
| * to some fixup code that loads an appropriate error | |
| * code) | |
| */ | |
| if (find_fixup_code(regs)) | |
| return; | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| */ | |
| if ((unsigned long) (address) < PAGE_SIZE) | |
| raw_printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); | |
| else | |
| raw_printk(KERN_ALERT "Unable to handle kernel access"); | |
| raw_printk(" at virtual address %08lx\n",address); | |
| die_if_kernel("Oops", regs, (writeaccess << 1) | protection); | |
| do_exit(SIGKILL); | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| printk("VM: killing process %s\n", tsk->comm); | |
| if (user_mode(regs)) | |
| do_exit(SIGKILL); | |
| goto no_context; | |
| do_sigbus: | |
| up_read(&mm->mmap_sem); | |
| /* | |
| * Send a sigbus, regardless of whether we were in kernel | |
| * or user mode. | |
| */ | |
| info.si_signo = SIGBUS; | |
| info.si_errno = 0; | |
| info.si_code = BUS_ADRERR; | |
| info.si_addr = (void *)address; | |
| force_sig_info(SIGBUS, &info, tsk); | |
| /* Kernel mode? Handle exceptions or die */ | |
| if (!user_mode(regs)) | |
| goto no_context; | |
| return; | |
| vmalloc_fault: | |
| { | |
| /* | |
| * Synchronize this task's top level page-table | |
| * with the 'reference' page table. | |
| * | |
| * Use current_pgd instead of tsk->active_mm->pgd | |
| * since the latter might be unavailable if this | |
| * code is executed in a misfortunately run irq | |
| * (like inside schedule() between switch_mm and | |
| * switch_to...). | |
| */ | |
| int offset = pgd_index(address); | |
| pgd_t *pgd, *pgd_k; | |
| pud_t *pud, *pud_k; | |
| pmd_t *pmd, *pmd_k; | |
| pte_t *pte_k; | |
| pgd = (pgd_t *)per_cpu(current_pgd, smp_processor_id()) + offset; | |
| pgd_k = init_mm.pgd + offset; | |
| /* Since we're two-level, we don't need to do both | |
| * set_pgd and set_pmd (they do the same thing). If | |
| * we go three-level at some point, do the right thing | |
| * with pgd_present and set_pgd here. | |
| * | |
| * Also, since the vmalloc area is global, we don't | |
| * need to copy individual PTE's, it is enough to | |
| * copy the pgd pointer into the pte page of the | |
| * root task. If that is there, we'll find our pte if | |
| * it exists. | |
| */ | |
| pud = pud_offset(pgd, address); | |
| pud_k = pud_offset(pgd_k, address); | |
| if (!pud_present(*pud_k)) | |
| goto no_context; | |
| pmd = pmd_offset(pud, address); | |
| pmd_k = pmd_offset(pud_k, address); | |
| if (!pmd_present(*pmd_k)) | |
| goto bad_area_nosemaphore; | |
| set_pmd(pmd, *pmd_k); | |
| /* Make sure the actual PTE exists as well to | |
| * catch kernel vmalloc-area accesses to non-mapped | |
| * addresses. If we don't do this, this will just | |
| * silently loop forever. | |
| */ | |
| pte_k = pte_offset_kernel(pmd_k, address); | |
| if (!pte_present(*pte_k)) | |
| goto no_context; | |
| return; | |
| } | |
| } | |
| /* Find fixup code. */ | |
| int | |
| find_fixup_code(struct pt_regs *regs) | |
| { | |
| const struct exception_table_entry *fixup; | |
| if ((fixup = search_exception_tables(instruction_pointer(regs))) != 0) { | |
| /* Adjust the instruction pointer in the stackframe. */ | |
| instruction_pointer(regs) = fixup->fixup; | |
| arch_fixup(regs); | |
| return 1; | |
| } | |
| return 0; | |
| } |