| /* Generic MTRR (Memory Type Range Register) driver. | |
| Copyright (C) 1997-2000 Richard Gooch | |
| Copyright (c) 2002 Patrick Mochel | |
| This library is free software; you can redistribute it and/or | |
| modify it under the terms of the GNU Library General Public | |
| License as published by the Free Software Foundation; either | |
| version 2 of the License, or (at your option) any later version. | |
| This library is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| Library General Public License for more details. | |
| You should have received a copy of the GNU Library General Public | |
| License along with this library; if not, write to the Free | |
| Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| Richard Gooch may be reached by email at rgooch@atnf.csiro.au | |
| The postal address is: | |
| Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. | |
| Source: "Pentium Pro Family Developer's Manual, Volume 3: | |
| Operating System Writer's Guide" (Intel document number 242692), | |
| section 11.11.7 | |
| This was cleaned and made readable by Patrick Mochel <mochel@osdl.org> | |
| on 6-7 March 2002. | |
| Source: Intel Architecture Software Developers Manual, Volume 3: | |
| System Programming Guide; Section 9.11. (1997 edition - PPro). | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/pci.h> | |
| #include <linux/smp.h> | |
| #include <linux/cpu.h> | |
| #include <linux/mutex.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/processor.h> | |
| #include <asm/msr.h> | |
| #include "mtrr.h" | |
| u32 num_var_ranges = 0; | |
| unsigned int *usage_table; | |
| static DEFINE_MUTEX(mtrr_mutex); | |
| u32 size_or_mask, size_and_mask; | |
| static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {}; | |
| struct mtrr_ops * mtrr_if = NULL; | |
| static void set_mtrr(unsigned int reg, unsigned long base, | |
| unsigned long size, mtrr_type type); | |
| extern int arr3_protected; | |
| void set_mtrr_ops(struct mtrr_ops * ops) | |
| { | |
| if (ops->vendor && ops->vendor < X86_VENDOR_NUM) | |
| mtrr_ops[ops->vendor] = ops; | |
| } | |
| /* Returns non-zero if we have the write-combining memory type */ | |
| static int have_wrcomb(void) | |
| { | |
| struct pci_dev *dev; | |
| u8 rev; | |
| if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) { | |
| /* ServerWorks LE chipsets < rev 6 have problems with write-combining | |
| Don't allow it and leave room for other chipsets to be tagged */ | |
| if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS && | |
| dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) { | |
| pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); | |
| if (rev <= 5) { | |
| printk(KERN_INFO "mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n"); | |
| pci_dev_put(dev); | |
| return 0; | |
| } | |
| } | |
| /* Intel 450NX errata # 23. Non ascending cacheline evictions to | |
| write combining memory may resulting in data corruption */ | |
| if (dev->vendor == PCI_VENDOR_ID_INTEL && | |
| dev->device == PCI_DEVICE_ID_INTEL_82451NX) { | |
| printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n"); | |
| pci_dev_put(dev); | |
| return 0; | |
| } | |
| pci_dev_put(dev); | |
| } | |
| return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0); | |
| } | |
| /* This function returns the number of variable MTRRs */ | |
| static void __init set_num_var_ranges(void) | |
| { | |
| unsigned long config = 0, dummy; | |
| if (use_intel()) { | |
| rdmsr(MTRRcap_MSR, config, dummy); | |
| } else if (is_cpu(AMD)) | |
| config = 2; | |
| else if (is_cpu(CYRIX) || is_cpu(CENTAUR)) | |
| config = 8; | |
| num_var_ranges = config & 0xff; | |
| } | |
| static void __init init_table(void) | |
| { | |
| int i, max; | |
| max = num_var_ranges; | |
| if ((usage_table = kmalloc(max * sizeof *usage_table, GFP_KERNEL)) | |
| == NULL) { | |
| printk(KERN_ERR "mtrr: could not allocate\n"); | |
| return; | |
| } | |
| for (i = 0; i < max; i++) | |
| usage_table[i] = 1; | |
| } | |
| struct set_mtrr_data { | |
| atomic_t count; | |
| atomic_t gate; | |
| unsigned long smp_base; | |
| unsigned long smp_size; | |
| unsigned int smp_reg; | |
| mtrr_type smp_type; | |
| }; | |
| #ifdef CONFIG_SMP | |
| static void ipi_handler(void *info) | |
| /* [SUMMARY] Synchronisation handler. Executed by "other" CPUs. | |
| [RETURNS] Nothing. | |
| */ | |
| { | |
| struct set_mtrr_data *data = info; | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| atomic_dec(&data->count); | |
| while(!atomic_read(&data->gate)) | |
| cpu_relax(); | |
| /* The master has cleared me to execute */ | |
| if (data->smp_reg != ~0U) | |
| mtrr_if->set(data->smp_reg, data->smp_base, | |
| data->smp_size, data->smp_type); | |
| else | |
| mtrr_if->set_all(); | |
| atomic_dec(&data->count); | |
| while(atomic_read(&data->gate)) | |
| cpu_relax(); | |
| atomic_dec(&data->count); | |
| local_irq_restore(flags); | |
| } | |
| #endif | |
| /** | |
| * set_mtrr - update mtrrs on all processors | |
| * @reg: mtrr in question | |
| * @base: mtrr base | |
| * @size: mtrr size | |
| * @type: mtrr type | |
| * | |
| * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly: | |
| * | |
| * 1. Send IPI to do the following: | |
| * 2. Disable Interrupts | |
| * 3. Wait for all procs to do so | |
| * 4. Enter no-fill cache mode | |
| * 5. Flush caches | |
| * 6. Clear PGE bit | |
| * 7. Flush all TLBs | |
| * 8. Disable all range registers | |
| * 9. Update the MTRRs | |
| * 10. Enable all range registers | |
| * 11. Flush all TLBs and caches again | |
| * 12. Enter normal cache mode and reenable caching | |
| * 13. Set PGE | |
| * 14. Wait for buddies to catch up | |
| * 15. Enable interrupts. | |
| * | |
| * What does that mean for us? Well, first we set data.count to the number | |
| * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait | |
| * until it hits 0 and proceed. We set the data.gate flag and reset data.count. | |
| * Meanwhile, they are waiting for that flag to be set. Once it's set, each | |
| * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it | |
| * differently, so we call mtrr_if->set() callback and let them take care of it. | |
| * When they're done, they again decrement data->count and wait for data.gate to | |
| * be reset. | |
| * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag. | |
| * Everyone then enables interrupts and we all continue on. | |
| * | |
| * Note that the mechanism is the same for UP systems, too; all the SMP stuff | |
| * becomes nops. | |
| */ | |
| static void set_mtrr(unsigned int reg, unsigned long base, | |
| unsigned long size, mtrr_type type) | |
| { | |
| struct set_mtrr_data data; | |
| unsigned long flags; | |
| data.smp_reg = reg; | |
| data.smp_base = base; | |
| data.smp_size = size; | |
| data.smp_type = type; | |
| atomic_set(&data.count, num_booting_cpus() - 1); | |
| atomic_set(&data.gate,0); | |
| /* Start the ball rolling on other CPUs */ | |
| if (smp_call_function(ipi_handler, &data, 1, 0) != 0) | |
| panic("mtrr: timed out waiting for other CPUs\n"); | |
| local_irq_save(flags); | |
| while(atomic_read(&data.count)) | |
| cpu_relax(); | |
| /* ok, reset count and toggle gate */ | |
| atomic_set(&data.count, num_booting_cpus() - 1); | |
| atomic_set(&data.gate,1); | |
| /* do our MTRR business */ | |
| /* HACK! | |
| * We use this same function to initialize the mtrrs on boot. | |
| * The state of the boot cpu's mtrrs has been saved, and we want | |
| * to replicate across all the APs. | |
| * If we're doing that @reg is set to something special... | |
| */ | |
| if (reg != ~0U) | |
| mtrr_if->set(reg,base,size,type); | |
| /* wait for the others */ | |
| while(atomic_read(&data.count)) | |
| cpu_relax(); | |
| atomic_set(&data.count, num_booting_cpus() - 1); | |
| atomic_set(&data.gate,0); | |
| /* | |
| * Wait here for everyone to have seen the gate change | |
| * So we're the last ones to touch 'data' | |
| */ | |
| while(atomic_read(&data.count)) | |
| cpu_relax(); | |
| local_irq_restore(flags); | |
| } | |
| /** | |
| * mtrr_add_page - Add a memory type region | |
| * @base: Physical base address of region in pages (4 KB) | |
| * @size: Physical size of region in pages (4 KB) | |
| * @type: Type of MTRR desired | |
| * @increment: If this is true do usage counting on the region | |
| * | |
| * Memory type region registers control the caching on newer Intel and | |
| * non Intel processors. This function allows drivers to request an | |
| * MTRR is added. The details and hardware specifics of each processor's | |
| * implementation are hidden from the caller, but nevertheless the | |
| * caller should expect to need to provide a power of two size on an | |
| * equivalent power of two boundary. | |
| * | |
| * If the region cannot be added either because all regions are in use | |
| * or the CPU cannot support it a negative value is returned. On success | |
| * the register number for this entry is returned, but should be treated | |
| * as a cookie only. | |
| * | |
| * On a multiprocessor machine the changes are made to all processors. | |
| * This is required on x86 by the Intel processors. | |
| * | |
| * The available types are | |
| * | |
| * %MTRR_TYPE_UNCACHABLE - No caching | |
| * | |
| * %MTRR_TYPE_WRBACK - Write data back in bursts whenever | |
| * | |
| * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts | |
| * | |
| * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes | |
| * | |
| * BUGS: Needs a quiet flag for the cases where drivers do not mind | |
| * failures and do not wish system log messages to be sent. | |
| */ | |
| int mtrr_add_page(unsigned long base, unsigned long size, | |
| unsigned int type, char increment) | |
| { | |
| int i; | |
| mtrr_type ltype; | |
| unsigned long lbase; | |
| unsigned int lsize; | |
| int error; | |
| if (!mtrr_if) | |
| return -ENXIO; | |
| if ((error = mtrr_if->validate_add_page(base,size,type))) | |
| return error; | |
| if (type >= MTRR_NUM_TYPES) { | |
| printk(KERN_WARNING "mtrr: type: %u invalid\n", type); | |
| return -EINVAL; | |
| } | |
| /* If the type is WC, check that this processor supports it */ | |
| if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) { | |
| printk(KERN_WARNING | |
| "mtrr: your processor doesn't support write-combining\n"); | |
| return -ENOSYS; | |
| } | |
| if (base & size_or_mask || size & size_or_mask) { | |
| printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n"); | |
| return -EINVAL; | |
| } | |
| error = -EINVAL; | |
| /* No CPU hotplug when we change MTRR entries */ | |
| lock_cpu_hotplug(); | |
| /* Search for existing MTRR */ | |
| mutex_lock(&mtrr_mutex); | |
| for (i = 0; i < num_var_ranges; ++i) { | |
| mtrr_if->get(i, &lbase, &lsize, <ype); | |
| if (base >= lbase + lsize) | |
| continue; | |
| if ((base < lbase) && (base + size <= lbase)) | |
| continue; | |
| /* At this point we know there is some kind of overlap/enclosure */ | |
| if ((base < lbase) || (base + size > lbase + lsize)) { | |
| printk(KERN_WARNING | |
| "mtrr: 0x%lx000,0x%lx000 overlaps existing" | |
| " 0x%lx000,0x%x000\n", base, size, lbase, | |
| lsize); | |
| goto out; | |
| } | |
| /* New region is enclosed by an existing region */ | |
| if (ltype != type) { | |
| if (type == MTRR_TYPE_UNCACHABLE) | |
| continue; | |
| printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n", | |
| base, size, mtrr_attrib_to_str(ltype), | |
| mtrr_attrib_to_str(type)); | |
| goto out; | |
| } | |
| if (increment) | |
| ++usage_table[i]; | |
| error = i; | |
| goto out; | |
| } | |
| /* Search for an empty MTRR */ | |
| i = mtrr_if->get_free_region(base, size); | |
| if (i >= 0) { | |
| set_mtrr(i, base, size, type); | |
| usage_table[i] = 1; | |
| } else | |
| printk(KERN_INFO "mtrr: no more MTRRs available\n"); | |
| error = i; | |
| out: | |
| mutex_unlock(&mtrr_mutex); | |
| unlock_cpu_hotplug(); | |
| return error; | |
| } | |
| static int mtrr_check(unsigned long base, unsigned long size) | |
| { | |
| if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) { | |
| printk(KERN_WARNING | |
| "mtrr: size and base must be multiples of 4 kiB\n"); | |
| printk(KERN_DEBUG | |
| "mtrr: size: 0x%lx base: 0x%lx\n", size, base); | |
| dump_stack(); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * mtrr_add - Add a memory type region | |
| * @base: Physical base address of region | |
| * @size: Physical size of region | |
| * @type: Type of MTRR desired | |
| * @increment: If this is true do usage counting on the region | |
| * | |
| * Memory type region registers control the caching on newer Intel and | |
| * non Intel processors. This function allows drivers to request an | |
| * MTRR is added. The details and hardware specifics of each processor's | |
| * implementation are hidden from the caller, but nevertheless the | |
| * caller should expect to need to provide a power of two size on an | |
| * equivalent power of two boundary. | |
| * | |
| * If the region cannot be added either because all regions are in use | |
| * or the CPU cannot support it a negative value is returned. On success | |
| * the register number for this entry is returned, but should be treated | |
| * as a cookie only. | |
| * | |
| * On a multiprocessor machine the changes are made to all processors. | |
| * This is required on x86 by the Intel processors. | |
| * | |
| * The available types are | |
| * | |
| * %MTRR_TYPE_UNCACHABLE - No caching | |
| * | |
| * %MTRR_TYPE_WRBACK - Write data back in bursts whenever | |
| * | |
| * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts | |
| * | |
| * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes | |
| * | |
| * BUGS: Needs a quiet flag for the cases where drivers do not mind | |
| * failures and do not wish system log messages to be sent. | |
| */ | |
| int | |
| mtrr_add(unsigned long base, unsigned long size, unsigned int type, | |
| char increment) | |
| { | |
| if (mtrr_check(base, size)) | |
| return -EINVAL; | |
| return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type, | |
| increment); | |
| } | |
| /** | |
| * mtrr_del_page - delete a memory type region | |
| * @reg: Register returned by mtrr_add | |
| * @base: Physical base address | |
| * @size: Size of region | |
| * | |
| * If register is supplied then base and size are ignored. This is | |
| * how drivers should call it. | |
| * | |
| * Releases an MTRR region. If the usage count drops to zero the | |
| * register is freed and the region returns to default state. | |
| * On success the register is returned, on failure a negative error | |
| * code. | |
| */ | |
| int mtrr_del_page(int reg, unsigned long base, unsigned long size) | |
| { | |
| int i, max; | |
| mtrr_type ltype; | |
| unsigned long lbase; | |
| unsigned int lsize; | |
| int error = -EINVAL; | |
| if (!mtrr_if) | |
| return -ENXIO; | |
| max = num_var_ranges; | |
| /* No CPU hotplug when we change MTRR entries */ | |
| lock_cpu_hotplug(); | |
| mutex_lock(&mtrr_mutex); | |
| if (reg < 0) { | |
| /* Search for existing MTRR */ | |
| for (i = 0; i < max; ++i) { | |
| mtrr_if->get(i, &lbase, &lsize, <ype); | |
| if (lbase == base && lsize == size) { | |
| reg = i; | |
| break; | |
| } | |
| } | |
| if (reg < 0) { | |
| printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base, | |
| size); | |
| goto out; | |
| } | |
| } | |
| if (reg >= max) { | |
| printk(KERN_WARNING "mtrr: register: %d too big\n", reg); | |
| goto out; | |
| } | |
| if (is_cpu(CYRIX) && !use_intel()) { | |
| if ((reg == 3) && arr3_protected) { | |
| printk(KERN_WARNING "mtrr: ARR3 cannot be changed\n"); | |
| goto out; | |
| } | |
| } | |
| mtrr_if->get(reg, &lbase, &lsize, <ype); | |
| if (lsize < 1) { | |
| printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg); | |
| goto out; | |
| } | |
| if (usage_table[reg] < 1) { | |
| printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg); | |
| goto out; | |
| } | |
| if (--usage_table[reg] < 1) | |
| set_mtrr(reg, 0, 0, 0); | |
| error = reg; | |
| out: | |
| mutex_unlock(&mtrr_mutex); | |
| unlock_cpu_hotplug(); | |
| return error; | |
| } | |
| /** | |
| * mtrr_del - delete a memory type region | |
| * @reg: Register returned by mtrr_add | |
| * @base: Physical base address | |
| * @size: Size of region | |
| * | |
| * If register is supplied then base and size are ignored. This is | |
| * how drivers should call it. | |
| * | |
| * Releases an MTRR region. If the usage count drops to zero the | |
| * register is freed and the region returns to default state. | |
| * On success the register is returned, on failure a negative error | |
| * code. | |
| */ | |
| int | |
| mtrr_del(int reg, unsigned long base, unsigned long size) | |
| { | |
| if (mtrr_check(base, size)) | |
| return -EINVAL; | |
| return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT); | |
| } | |
| EXPORT_SYMBOL(mtrr_add); | |
| EXPORT_SYMBOL(mtrr_del); | |
| /* HACK ALERT! | |
| * These should be called implicitly, but we can't yet until all the initcall | |
| * stuff is done... | |
| */ | |
| extern void amd_init_mtrr(void); | |
| extern void cyrix_init_mtrr(void); | |
| extern void centaur_init_mtrr(void); | |
| static void __init init_ifs(void) | |
| { | |
| amd_init_mtrr(); | |
| cyrix_init_mtrr(); | |
| centaur_init_mtrr(); | |
| } | |
| /* The suspend/resume methods are only for CPU without MTRR. CPU using generic | |
| * MTRR driver doesn't require this | |
| */ | |
| struct mtrr_value { | |
| mtrr_type ltype; | |
| unsigned long lbase; | |
| unsigned int lsize; | |
| }; | |
| static struct mtrr_value * mtrr_state; | |
| static int mtrr_save(struct sys_device * sysdev, pm_message_t state) | |
| { | |
| int i; | |
| int size = num_var_ranges * sizeof(struct mtrr_value); | |
| mtrr_state = kmalloc(size,GFP_ATOMIC); | |
| if (mtrr_state) | |
| memset(mtrr_state,0,size); | |
| else | |
| return -ENOMEM; | |
| for (i = 0; i < num_var_ranges; i++) { | |
| mtrr_if->get(i, | |
| &mtrr_state[i].lbase, | |
| &mtrr_state[i].lsize, | |
| &mtrr_state[i].ltype); | |
| } | |
| return 0; | |
| } | |
| static int mtrr_restore(struct sys_device * sysdev) | |
| { | |
| int i; | |
| for (i = 0; i < num_var_ranges; i++) { | |
| if (mtrr_state[i].lsize) | |
| set_mtrr(i, | |
| mtrr_state[i].lbase, | |
| mtrr_state[i].lsize, | |
| mtrr_state[i].ltype); | |
| } | |
| kfree(mtrr_state); | |
| return 0; | |
| } | |
| static struct sysdev_driver mtrr_sysdev_driver = { | |
| .suspend = mtrr_save, | |
| .resume = mtrr_restore, | |
| }; | |
| /** | |
| * mtrr_bp_init - initialize mtrrs on the boot CPU | |
| * | |
| * This needs to be called early; before any of the other CPUs are | |
| * initialized (i.e. before smp_init()). | |
| * | |
| */ | |
| void __init mtrr_bp_init(void) | |
| { | |
| init_ifs(); | |
| if (cpu_has_mtrr) { | |
| mtrr_if = &generic_mtrr_ops; | |
| size_or_mask = 0xff000000; /* 36 bits */ | |
| size_and_mask = 0x00f00000; | |
| /* This is an AMD specific MSR, but we assume(hope?) that | |
| Intel will implement it to when they extend the address | |
| bus of the Xeon. */ | |
| if (cpuid_eax(0x80000000) >= 0x80000008) { | |
| u32 phys_addr; | |
| phys_addr = cpuid_eax(0x80000008) & 0xff; | |
| /* CPUID workaround for Intel 0F33/0F34 CPU */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && | |
| boot_cpu_data.x86 == 0xF && | |
| boot_cpu_data.x86_model == 0x3 && | |
| (boot_cpu_data.x86_mask == 0x3 || | |
| boot_cpu_data.x86_mask == 0x4)) | |
| phys_addr = 36; | |
| size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1); | |
| size_and_mask = ~size_or_mask & 0xfff00000; | |
| } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && | |
| boot_cpu_data.x86 == 6) { | |
| /* VIA C* family have Intel style MTRRs, but | |
| don't support PAE */ | |
| size_or_mask = 0xfff00000; /* 32 bits */ | |
| size_and_mask = 0; | |
| } | |
| } else { | |
| switch (boot_cpu_data.x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| if (cpu_has_k6_mtrr) { | |
| /* Pre-Athlon (K6) AMD CPU MTRRs */ | |
| mtrr_if = mtrr_ops[X86_VENDOR_AMD]; | |
| size_or_mask = 0xfff00000; /* 32 bits */ | |
| size_and_mask = 0; | |
| } | |
| break; | |
| case X86_VENDOR_CENTAUR: | |
| if (cpu_has_centaur_mcr) { | |
| mtrr_if = mtrr_ops[X86_VENDOR_CENTAUR]; | |
| size_or_mask = 0xfff00000; /* 32 bits */ | |
| size_and_mask = 0; | |
| } | |
| break; | |
| case X86_VENDOR_CYRIX: | |
| if (cpu_has_cyrix_arr) { | |
| mtrr_if = mtrr_ops[X86_VENDOR_CYRIX]; | |
| size_or_mask = 0xfff00000; /* 32 bits */ | |
| size_and_mask = 0; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| if (mtrr_if) { | |
| set_num_var_ranges(); | |
| init_table(); | |
| if (use_intel()) | |
| get_mtrr_state(); | |
| } | |
| } | |
| void mtrr_ap_init(void) | |
| { | |
| unsigned long flags; | |
| if (!mtrr_if || !use_intel()) | |
| return; | |
| /* | |
| * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed, | |
| * but this routine will be called in cpu boot time, holding the lock | |
| * breaks it. This routine is called in two cases: 1.very earily time | |
| * of software resume, when there absolutely isn't mtrr entry changes; | |
| * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to | |
| * prevent mtrr entry changes | |
| */ | |
| local_irq_save(flags); | |
| mtrr_if->set_all(); | |
| local_irq_restore(flags); | |
| } | |
| static int __init mtrr_init_finialize(void) | |
| { | |
| if (!mtrr_if) | |
| return 0; | |
| if (use_intel()) | |
| mtrr_state_warn(); | |
| else { | |
| /* The CPUs haven't MTRR and seemes not support SMP. They have | |
| * specific drivers, we use a tricky method to support | |
| * suspend/resume for them. | |
| * TBD: is there any system with such CPU which supports | |
| * suspend/resume? if no, we should remove the code. | |
| */ | |
| sysdev_driver_register(&cpu_sysdev_class, | |
| &mtrr_sysdev_driver); | |
| } | |
| return 0; | |
| } | |
| subsys_initcall(mtrr_init_finialize); |