| #include <linux/errno.h> | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/ioport.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/random.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/sysdev.h> | |
| #include <linux/bitops.h> | |
| #include <asm/8253pit.h> | |
| #include <asm/atomic.h> | |
| #include <asm/system.h> | |
| #include <asm/io.h> | |
| #include <asm/timer.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/delay.h> | |
| #include <asm/desc.h> | |
| #include <asm/apic.h> | |
| #include <asm/arch_hooks.h> | |
| #include <asm/i8259.h> | |
| #include <io_ports.h> | |
| /* | |
| * This is the 'legacy' 8259A Programmable Interrupt Controller, | |
| * present in the majority of PC/AT boxes. | |
| * plus some generic x86 specific things if generic specifics makes | |
| * any sense at all. | |
| * this file should become arch/i386/kernel/irq.c when the old irq.c | |
| * moves to arch independent land | |
| */ | |
| static int i8259A_auto_eoi; | |
| DEFINE_SPINLOCK(i8259A_lock); | |
| static void mask_and_ack_8259A(unsigned int); | |
| static struct irq_chip i8259A_chip = { | |
| .name = "XT-PIC", | |
| .mask = disable_8259A_irq, | |
| .unmask = enable_8259A_irq, | |
| .mask_ack = mask_and_ack_8259A, | |
| }; | |
| /* | |
| * 8259A PIC functions to handle ISA devices: | |
| */ | |
| /* | |
| * This contains the irq mask for both 8259A irq controllers, | |
| */ | |
| unsigned int cached_irq_mask = 0xffff; | |
| /* | |
| * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) | |
| * boards the timer interrupt is not really connected to any IO-APIC pin, | |
| * it's fed to the master 8259A's IR0 line only. | |
| * | |
| * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. | |
| * this 'mixed mode' IRQ handling costs nothing because it's only used | |
| * at IRQ setup time. | |
| */ | |
| unsigned long io_apic_irqs; | |
| void disable_8259A_irq(unsigned int irq) | |
| { | |
| unsigned int mask = 1 << irq; | |
| unsigned long flags; | |
| spin_lock_irqsave(&i8259A_lock, flags); | |
| cached_irq_mask |= mask; | |
| if (irq & 8) | |
| outb(cached_slave_mask, PIC_SLAVE_IMR); | |
| else | |
| outb(cached_master_mask, PIC_MASTER_IMR); | |
| spin_unlock_irqrestore(&i8259A_lock, flags); | |
| } | |
| void enable_8259A_irq(unsigned int irq) | |
| { | |
| unsigned int mask = ~(1 << irq); | |
| unsigned long flags; | |
| spin_lock_irqsave(&i8259A_lock, flags); | |
| cached_irq_mask &= mask; | |
| if (irq & 8) | |
| outb(cached_slave_mask, PIC_SLAVE_IMR); | |
| else | |
| outb(cached_master_mask, PIC_MASTER_IMR); | |
| spin_unlock_irqrestore(&i8259A_lock, flags); | |
| } | |
| int i8259A_irq_pending(unsigned int irq) | |
| { | |
| unsigned int mask = 1<<irq; | |
| unsigned long flags; | |
| int ret; | |
| spin_lock_irqsave(&i8259A_lock, flags); | |
| if (irq < 8) | |
| ret = inb(PIC_MASTER_CMD) & mask; | |
| else | |
| ret = inb(PIC_SLAVE_CMD) & (mask >> 8); | |
| spin_unlock_irqrestore(&i8259A_lock, flags); | |
| return ret; | |
| } | |
| void make_8259A_irq(unsigned int irq) | |
| { | |
| disable_irq_nosync(irq); | |
| io_apic_irqs &= ~(1<<irq); | |
| set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, | |
| "XT"); | |
| enable_irq(irq); | |
| } | |
| /* | |
| * This function assumes to be called rarely. Switching between | |
| * 8259A registers is slow. | |
| * This has to be protected by the irq controller spinlock | |
| * before being called. | |
| */ | |
| static inline int i8259A_irq_real(unsigned int irq) | |
| { | |
| int value; | |
| int irqmask = 1<<irq; | |
| if (irq < 8) { | |
| outb(0x0B,PIC_MASTER_CMD); /* ISR register */ | |
| value = inb(PIC_MASTER_CMD) & irqmask; | |
| outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ | |
| return value; | |
| } | |
| outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ | |
| value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); | |
| outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ | |
| return value; | |
| } | |
| /* | |
| * Careful! The 8259A is a fragile beast, it pretty | |
| * much _has_ to be done exactly like this (mask it | |
| * first, _then_ send the EOI, and the order of EOI | |
| * to the two 8259s is important! | |
| */ | |
| static void mask_and_ack_8259A(unsigned int irq) | |
| { | |
| unsigned int irqmask = 1 << irq; | |
| unsigned long flags; | |
| spin_lock_irqsave(&i8259A_lock, flags); | |
| /* | |
| * Lightweight spurious IRQ detection. We do not want | |
| * to overdo spurious IRQ handling - it's usually a sign | |
| * of hardware problems, so we only do the checks we can | |
| * do without slowing down good hardware unnecessarily. | |
| * | |
| * Note that IRQ7 and IRQ15 (the two spurious IRQs | |
| * usually resulting from the 8259A-1|2 PICs) occur | |
| * even if the IRQ is masked in the 8259A. Thus we | |
| * can check spurious 8259A IRQs without doing the | |
| * quite slow i8259A_irq_real() call for every IRQ. | |
| * This does not cover 100% of spurious interrupts, | |
| * but should be enough to warn the user that there | |
| * is something bad going on ... | |
| */ | |
| if (cached_irq_mask & irqmask) | |
| goto spurious_8259A_irq; | |
| cached_irq_mask |= irqmask; | |
| handle_real_irq: | |
| if (irq & 8) { | |
| inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ | |
| outb(cached_slave_mask, PIC_SLAVE_IMR); | |
| outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ | |
| outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ | |
| } else { | |
| inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ | |
| outb(cached_master_mask, PIC_MASTER_IMR); | |
| outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ | |
| } | |
| spin_unlock_irqrestore(&i8259A_lock, flags); | |
| return; | |
| spurious_8259A_irq: | |
| /* | |
| * this is the slow path - should happen rarely. | |
| */ | |
| if (i8259A_irq_real(irq)) | |
| /* | |
| * oops, the IRQ _is_ in service according to the | |
| * 8259A - not spurious, go handle it. | |
| */ | |
| goto handle_real_irq; | |
| { | |
| static int spurious_irq_mask; | |
| /* | |
| * At this point we can be sure the IRQ is spurious, | |
| * lets ACK and report it. [once per IRQ] | |
| */ | |
| if (!(spurious_irq_mask & irqmask)) { | |
| printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); | |
| spurious_irq_mask |= irqmask; | |
| } | |
| atomic_inc(&irq_err_count); | |
| /* | |
| * Theoretically we do not have to handle this IRQ, | |
| * but in Linux this does not cause problems and is | |
| * simpler for us. | |
| */ | |
| goto handle_real_irq; | |
| } | |
| } | |
| static char irq_trigger[2]; | |
| /** | |
| * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ | |
| */ | |
| static void restore_ELCR(char *trigger) | |
| { | |
| outb(trigger[0], 0x4d0); | |
| outb(trigger[1], 0x4d1); | |
| } | |
| static void save_ELCR(char *trigger) | |
| { | |
| /* IRQ 0,1,2,8,13 are marked as reserved */ | |
| trigger[0] = inb(0x4d0) & 0xF8; | |
| trigger[1] = inb(0x4d1) & 0xDE; | |
| } | |
| static int i8259A_resume(struct sys_device *dev) | |
| { | |
| init_8259A(i8259A_auto_eoi); | |
| restore_ELCR(irq_trigger); | |
| return 0; | |
| } | |
| static int i8259A_suspend(struct sys_device *dev, pm_message_t state) | |
| { | |
| save_ELCR(irq_trigger); | |
| return 0; | |
| } | |
| static int i8259A_shutdown(struct sys_device *dev) | |
| { | |
| /* Put the i8259A into a quiescent state that | |
| * the kernel initialization code can get it | |
| * out of. | |
| */ | |
| outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ | |
| outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ | |
| return 0; | |
| } | |
| static struct sysdev_class i8259_sysdev_class = { | |
| set_kset_name("i8259"), | |
| .suspend = i8259A_suspend, | |
| .resume = i8259A_resume, | |
| .shutdown = i8259A_shutdown, | |
| }; | |
| static struct sys_device device_i8259A = { | |
| .id = 0, | |
| .cls = &i8259_sysdev_class, | |
| }; | |
| static int __init i8259A_init_sysfs(void) | |
| { | |
| int error = sysdev_class_register(&i8259_sysdev_class); | |
| if (!error) | |
| error = sysdev_register(&device_i8259A); | |
| return error; | |
| } | |
| device_initcall(i8259A_init_sysfs); | |
| void init_8259A(int auto_eoi) | |
| { | |
| unsigned long flags; | |
| i8259A_auto_eoi = auto_eoi; | |
| spin_lock_irqsave(&i8259A_lock, flags); | |
| outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ | |
| outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ | |
| /* | |
| * outb_p - this has to work on a wide range of PC hardware. | |
| */ | |
| outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ | |
| outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ | |
| outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ | |
| if (auto_eoi) /* master does Auto EOI */ | |
| outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); | |
| else /* master expects normal EOI */ | |
| outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); | |
| outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ | |
| outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ | |
| outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ | |
| outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ | |
| if (auto_eoi) | |
| /* | |
| * In AEOI mode we just have to mask the interrupt | |
| * when acking. | |
| */ | |
| i8259A_chip.mask_ack = disable_8259A_irq; | |
| else | |
| i8259A_chip.mask_ack = mask_and_ack_8259A; | |
| udelay(100); /* wait for 8259A to initialize */ | |
| outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ | |
| outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ | |
| spin_unlock_irqrestore(&i8259A_lock, flags); | |
| } | |
| /* | |
| * Note that on a 486, we don't want to do a SIGFPE on an irq13 | |
| * as the irq is unreliable, and exception 16 works correctly | |
| * (ie as explained in the intel literature). On a 386, you | |
| * can't use exception 16 due to bad IBM design, so we have to | |
| * rely on the less exact irq13. | |
| * | |
| * Careful.. Not only is IRQ13 unreliable, but it is also | |
| * leads to races. IBM designers who came up with it should | |
| * be shot. | |
| */ | |
| static irqreturn_t math_error_irq(int cpl, void *dev_id) | |
| { | |
| extern void math_error(void __user *); | |
| outb(0,0xF0); | |
| if (ignore_fpu_irq || !boot_cpu_data.hard_math) | |
| return IRQ_NONE; | |
| math_error((void __user *)get_irq_regs()->eip); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * New motherboards sometimes make IRQ 13 be a PCI interrupt, | |
| * so allow interrupt sharing. | |
| */ | |
| static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL }; | |
| void __init init_ISA_irqs (void) | |
| { | |
| int i; | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| init_bsp_APIC(); | |
| #endif | |
| init_8259A(0); | |
| for (i = 0; i < NR_IRQS; i++) { | |
| irq_desc[i].status = IRQ_DISABLED; | |
| irq_desc[i].action = NULL; | |
| irq_desc[i].depth = 1; | |
| if (i < 16) { | |
| /* | |
| * 16 old-style INTA-cycle interrupts: | |
| */ | |
| set_irq_chip_and_handler_name(i, &i8259A_chip, | |
| handle_level_irq, "XT"); | |
| } else { | |
| /* | |
| * 'high' PCI IRQs filled in on demand | |
| */ | |
| irq_desc[i].chip = &no_irq_chip; | |
| } | |
| } | |
| } | |
| void __init init_IRQ(void) | |
| { | |
| int i; | |
| /* all the set up before the call gates are initialised */ | |
| pre_intr_init_hook(); | |
| /* | |
| * Cover the whole vector space, no vector can escape | |
| * us. (some of these will be overridden and become | |
| * 'special' SMP interrupts) | |
| */ | |
| for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { | |
| int vector = FIRST_EXTERNAL_VECTOR + i; | |
| if (i >= NR_IRQS) | |
| break; | |
| if (vector != SYSCALL_VECTOR) | |
| set_intr_gate(vector, interrupt[i]); | |
| } | |
| /* setup after call gates are initialised (usually add in | |
| * the architecture specific gates) | |
| */ | |
| intr_init_hook(); | |
| /* | |
| * Set the clock to HZ Hz, we already have a valid | |
| * vector now: | |
| */ | |
| setup_pit_timer(); | |
| /* | |
| * External FPU? Set up irq13 if so, for | |
| * original braindamaged IBM FERR coupling. | |
| */ | |
| if (boot_cpu_data.hard_math && !cpu_has_fpu) | |
| setup_irq(FPU_IRQ, &fpu_irq); | |
| irq_ctx_init(smp_processor_id()); | |
| } |